diff options
Diffstat (limited to 'Documentation/devicetree/bindings/net')
74 files changed, 3049 insertions, 1041 deletions
diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml index 1129f2b58e98..929cf8c0b0fd 100644 --- a/Documentation/devicetree/bindings/net/adi,adin.yaml +++ b/Documentation/devicetree/bindings/net/adi,adin.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices ADIN1200/ADIN1300 PHY maintainers: - - Alexandru Ardelean <alexandru.ardelean@analog.com> + - Alexandru Tachici <alexandru.tachici@analog.com> description: | Bindings for Analog Devices Industrial Ethernet PHYs @@ -36,6 +36,22 @@ properties: enum: [ 4, 8, 12, 16, 20, 24 ] default: 8 + adi,phy-output-clock: + description: | + Select clock output on GP_CLK pin. Two clocks are available: + A 25MHz reference and a free-running 125MHz. + The phy can alternatively automatically switch between the reference and + the 125MHz clocks based on its internal state. + $ref: /schemas/types.yaml#/definitions/string + enum: + - 25mhz-reference + - 125mhz-free-running + - adaptive-free-running + + adi,phy-output-reference-clock: + description: Enable 25MHz reference clock output on CLK25_REF pin. + type: boolean + unevaluatedProperties: false examples: diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml index 8d8560a67abf..098b2bf7d976 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-a10-emac.yaml @@ -29,6 +29,10 @@ properties: allwinner,sram: description: Phandle to the device SRAM $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to SRAM + - description: register value for device required: - compatible diff --git a/Documentation/devicetree/bindings/net/asix,ax88178.yaml b/Documentation/devicetree/bindings/net/asix,ax88178.yaml new file mode 100644 index 000000000000..1af52358de4c --- /dev/null +++ b/Documentation/devicetree/bindings/net/asix,ax88178.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/asix,ax88178.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The device tree bindings for the USB Ethernet controllers + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + Device tree properties for hard wired USB Ethernet devices. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - usbb95,1720 # ASIX AX88172 + - usbb95,172a # ASIX AX88172A + - usbb95,1780 # ASIX AX88178 + - usbb95,7720 # ASIX AX88772 + - usbb95,772a # ASIX AX88772A + - usbb95,772b # ASIX AX88772B + - usbb95,7e2b # ASIX AX88772B + + reg: true + local-mac-address: true + mac-address: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usbb95,7e2b"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + usb1@1 { + compatible = "usb1234,5678"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usbb95,772b"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml index 1c88820cbcdf..f81eda8cb0a5 100644 --- a/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml +++ b/Documentation/devicetree/bindings/net/aspeed,ast2600-mdio.yaml @@ -20,10 +20,14 @@ allOf: properties: compatible: const: aspeed,ast2600-mdio + reg: maxItems: 1 description: The register range of the MDIO controller instance + resets: + maxItems: 1 + required: - compatible - reg @@ -34,11 +38,13 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/ast2600-clock.h> mdio0: mdio@1e650000 { compatible = "aspeed,ast2600-mdio"; reg = <0x1e650000 0x8>; #address-cells = <1>; #size-cells = <0>; + resets = <&syscon ASPEED_RESET_MII>; ethphy0: ethernet-phy@0 { compatible = "ethernet-phy-ieee802.3-c22"; diff --git a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml index c93fe9d3ea82..3c51b2d02957 100644 --- a/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml +++ b/Documentation/devicetree/bindings/net/can/allwinner,sun4i-a10-can.yaml @@ -10,6 +10,9 @@ maintainers: - Chen-Yu Tsai <wens@csie.org> - Maxime Ripard <mripard@kernel.org> +allOf: + - $ref: can-controller.yaml# + properties: compatible: oneOf: diff --git a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml index 2cd145a642f1..51aa89ac7e85 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,c_can.yaml @@ -56,10 +56,10 @@ properties: offset). $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - - description: The phandle to the system control region. - - description: The register offset. - - description: The CAN instance number. + - items: + - description: The phandle to the system control region. + - description: The register offset. + - description: The CAN instance number. resets: maxItems: 1 @@ -80,8 +80,6 @@ if: then: properties: interrupts: - minItems: 4 - maxItems: 4 items: - description: Error and status IRQ - description: Message object IRQ @@ -91,7 +89,6 @@ then: else: properties: interrupts: - maxItems: 1 items: - description: Error and status IRQ diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 401ab7cdb379..26aa0830eea1 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -9,7 +9,10 @@ title: Bosch MCAN controller Bindings description: Bosch MCAN controller for CAN bus maintainers: - - Sriram Dash <sriram.dash@samsung.com> + - Chandrasekar Ramakrishnan <rcsekar@samsung.com> + +allOf: + - $ref: can-controller.yaml# properties: compatible: @@ -66,8 +69,8 @@ properties: M_CAN includes the following elements according to user manual: 11-bit Filter 0-128 elements / 0-128 words 29-bit Filter 0-64 elements / 0-128 words - Rx FIFO 0 0-64 elements / 0-1152 words - Rx FIFO 1 0-64 elements / 0-1152 words + Rx FIFO 0 0-64 elements / 0-1152 words + Rx FIFO 1 0-64 elements / 0-1152 words Rx Buffers 0-64 elements / 0-1152 words Tx Event FIFO 0-32 elements / 0-64 words Tx Buffers 0-32 elements / 0-576 words @@ -101,6 +104,7 @@ properties: - description: Tx Buffers 0-32 elements / 0-576 words minimum: 0 maximum: 32 + minItems: 1 power-domains: description: diff --git a/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml new file mode 100644 index 000000000000..4635cb96fc64 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/ctu,ctucanfd.yaml @@ -0,0 +1,66 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/ctu,ctucanfd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CTU CAN FD Open-source IP Core Device Tree Bindings + +description: | + Open-source CAN FD IP core developed at the Czech Technical University in Prague + + The core sources and documentation on project page + [1] sources : https://gitlab.fel.cvut.cz/canbus/ctucanfd_ip_core + [2] datasheet : https://canbus.pages.fel.cvut.cz/ctucanfd_ip_core/doc/Datasheet.pdf + + Integration in Xilinx Zynq SoC based system together with + OpenCores SJA1000 compatible controllers + [3] project : https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top + Martin Jerabek dimploma thesis with integration and testing + framework description + [4] PDF : https://dspace.cvut.cz/bitstream/handle/10467/80366/F3-DP-2019-Jerabek-Martin-Jerabek-thesis-2019-canfd.pdf + +maintainers: + - Pavel Pisa <pisa@cmp.felk.cvut.cz> + - Ondrej Ille <ondrej.ille@gmail.com> + - Martin Jerabek <martin.jerabek01@gmail.com> + +allOf: + - $ref: can-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - const: ctu,ctucanfd-2 + - const: ctu,ctucanfd + - const: ctu,ctucanfd + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + description: | + phandle of reference clock (100 MHz is appropriate + for FPGA implementation on Zynq-7000 system). + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false + +examples: + - | + ctu_can_fd_0: can@43c30000 { + compatible = "ctu,ctucanfd"; + interrupts = <0 30 4>; + clocks = <&clkc 15>; + reg = <0x43c30000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml index 3f0ee17c1461..e52db841bb8c 100644 --- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml +++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml @@ -84,12 +84,12 @@ properties: req_bit is the bit offset of CAN stop request. $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - - description: The 'gpr' is the phandle to general purpose register node. - - description: The 'req_gpr' is the gpr register offset of CAN stop request. - maximum: 0xff - - description: The 'req_bit' is the bit offset of CAN stop request. - maximum: 0x1f + - items: + - description: The 'gpr' is the phandle to general purpose register node. + - description: The 'req_gpr' is the gpr register offset of CAN stop request. + maximum: 0xff + - description: The 'req_bit' is the bit offset of CAN stop request. + maximum: 0x1f fsl,clk-source: description: | diff --git a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml index 2a884c1fe0e0..7a73057707b4 100644 --- a/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml +++ b/Documentation/devicetree/bindings/net/can/microchip,mcp251xfd.yaml @@ -5,22 +5,26 @@ $id: http://devicetree.org/schemas/net/can/microchip,mcp251xfd.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: - Microchip MCP2517FD and MCP2518FD stand-alone CAN controller device tree - bindings + Microchip MCP2517FD, MCP2518FD and MCP251863 stand-alone CAN + controller device tree bindings maintainers: - Marc Kleine-Budde <mkl@pengutronix.de> +allOf: + - $ref: can-controller.yaml# + properties: compatible: oneOf: - - const: microchip,mcp2517fd - description: for MCP2517FD - - const: microchip,mcp2518fd - description: for MCP2518FD - - const: microchip,mcp251xfd - description: to autodetect chip variant - + - enum: + - microchip,mcp2517fd + - microchip,mcp2518fd + - microchip,mcp251xfd + - items: + - enum: + - microchip,mcp251863 + - const: microchip,mcp2518fd reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml index 546c6e6d2fb0..6f71fc96bc4e 100644 --- a/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml +++ b/Documentation/devicetree/bindings/net/can/renesas,rcar-canfd.yaml @@ -23,6 +23,7 @@ properties: - renesas,r8a774e1-canfd # RZ/G2H - renesas,r8a7795-canfd # R-Car H3 - renesas,r8a7796-canfd # R-Car M3-W + - renesas,r8a77961-canfd # R-Car M3-W+ - renesas,r8a77965-canfd # R-Car M3-N - renesas,r8a77970-canfd # R-Car V3M - renesas,r8a77980-canfd # R-Car V3H @@ -32,9 +33,13 @@ properties: - items: - enum: + - renesas,r9a07g043-canfd # RZ/G2UL - renesas,r9a07g044-canfd # RZ/G2{L,LC} + - renesas,r9a07g054-canfd # RZ/V2L - const: renesas,rzg2l-canfd # RZ/G2L family + - const: renesas,r8a779a0-canfd # R-Car V3U + reg: maxItems: 1 @@ -83,6 +88,7 @@ required: - compatible - reg - interrupts + - interrupt-names - clocks - clock-names - power-domains @@ -131,7 +137,6 @@ then: - const: rstc_n required: - - interrupt-names - reset-names else: properties: @@ -162,6 +167,7 @@ examples: reg = <0xe66c0000 0x8000>; interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "ch_int", "g_int"; clocks = <&cpg CPG_MOD 914>, <&cpg CPG_CORE R8A7795_CLK_CANFD>, <&can_clk>; diff --git a/Documentation/devicetree/bindings/net/can/xilinx,can.yaml b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml new file mode 100644 index 000000000000..65af8183cb9c --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/xilinx,can.yaml @@ -0,0 +1,161 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/xilinx,can.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: + Xilinx Axi CAN/Zynq CANPS controller + +maintainers: + - Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> + +properties: + compatible: + enum: + - xlnx,zynq-can-1.0 + - xlnx,axi-can-1.00.a + - xlnx,canfd-1.0 + - xlnx,canfd-2.0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + maxItems: 2 + + power-domains: + maxItems: 1 + + tx-fifo-depth: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: CAN Tx fifo depth (Zynq, Axi CAN). + + rx-fifo-depth: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: CAN Rx fifo depth (Zynq, Axi CAN, CAN FD in sequential Rx mode) + + tx-mailbox-count: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: CAN Tx mailbox buffer count (CAN FD) + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + +unevaluatedProperties: false + +allOf: + - $ref: can-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - xlnx,zynq-can-1.0 + + then: + properties: + clock-names: + items: + - const: can_clk + - const: pclk + required: + - tx-fifo-depth + - rx-fifo-depth + + - if: + properties: + compatible: + contains: + enum: + - xlnx,axi-can-1.00.a + + then: + properties: + clock-names: + items: + - const: can_clk + - const: s_axi_aclk + required: + - tx-fifo-depth + - rx-fifo-depth + + - if: + properties: + compatible: + contains: + enum: + - xlnx,canfd-1.0 + - xlnx,canfd-2.0 + + then: + properties: + clock-names: + items: + - const: can_clk + - const: s_axi_aclk + required: + - tx-mailbox-count + - rx-fifo-depth + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + reg = <0xe0008000 0x1000>; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + - | + can@40000000 { + compatible = "xlnx,axi-can-1.00.a"; + reg = <0x40000000 0x10000>; + clocks = <&clkc 0>, <&clkc 1>; + clock-names = "can_clk", "s_axi_aclk"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + - | + can@40000000 { + compatible = "xlnx,canfd-1.0"; + reg = <0x40000000 0x2000>; + clocks = <&clkc 0>, <&clkc 1>; + clock-names = "can_clk", "s_axi_aclk"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + tx-mailbox-count = <0x20>; + rx-fifo-depth = <0x20>; + }; + + - | + can@ff060000 { + compatible = "xlnx,canfd-2.0"; + reg = <0xff060000 0x6000>; + clocks = <&clkc 0>, <&clkc 1>; + clock-names = "can_clk", "s_axi_aclk"; + interrupt-parent = <&intc>; + interrupts = <GIC_SPI 59 IRQ_TYPE_EDGE_RISING>; + tx-mailbox-count = <0x20>; + rx-fifo-depth = <0x40>; + }; diff --git a/Documentation/devicetree/bindings/net/can/xilinx_can.txt b/Documentation/devicetree/bindings/net/can/xilinx_can.txt deleted file mode 100644 index 100cc40b8510..000000000000 --- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt +++ /dev/null @@ -1,61 +0,0 @@ -Xilinx Axi CAN/Zynq CANPS controller Device Tree Bindings ---------------------------------------------------------- - -Required properties: -- compatible : Should be: - - "xlnx,zynq-can-1.0" for Zynq CAN controllers - - "xlnx,axi-can-1.00.a" for Axi CAN controllers - - "xlnx,canfd-1.0" for CAN FD controllers - - "xlnx,canfd-2.0" for CAN FD 2.0 controllers -- reg : Physical base address and size of the controller - registers map. -- interrupts : Property with a value describing the interrupt - number. -- clock-names : List of input clock names - - "can_clk", "pclk" (For CANPS), - - "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD). - (See clock bindings for details). -- clocks : Clock phandles (see clock bindings for details). -- tx-fifo-depth : Can Tx fifo depth (Zynq, Axi CAN). -- rx-fifo-depth : Can Rx fifo depth (Zynq, Axi CAN, CAN FD in - sequential Rx mode). -- tx-mailbox-count : Can Tx mailbox buffer count (CAN FD). -- rx-mailbox-count : Can Rx mailbox buffer count (CAN FD in mailbox Rx - mode). - - -Example: - -For Zynq CANPS Dts file: - zynq_can_0: can@e0008000 { - compatible = "xlnx,zynq-can-1.0"; - clocks = <&clkc 19>, <&clkc 36>; - clock-names = "can_clk", "pclk"; - reg = <0xe0008000 0x1000>; - interrupts = <0 28 4>; - interrupt-parent = <&intc>; - tx-fifo-depth = <0x40>; - rx-fifo-depth = <0x40>; - }; -For Axi CAN Dts file: - axi_can_0: axi-can@40000000 { - compatible = "xlnx,axi-can-1.00.a"; - clocks = <&clkc 0>, <&clkc 1>; - clock-names = "can_clk","s_axi_aclk" ; - reg = <0x40000000 0x10000>; - interrupt-parent = <&intc>; - interrupts = <0 59 1>; - tx-fifo-depth = <0x40>; - rx-fifo-depth = <0x40>; - }; -For CAN FD Dts file: - canfd_0: canfd@40000000 { - compatible = "xlnx,canfd-1.0"; - clocks = <&clkc 0>, <&clkc 1>; - clock-names = "can_clk", "s_axi_aclk"; - reg = <0x40000000 0x2000>; - interrupt-parent = <&intc>; - interrupts = <0 59 1>; - tx-mailbox-count = <0x20>; - rx-fifo-depth = <0x20>; - }; diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index 8dd06db34169..86fc31c2d91b 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -81,6 +81,18 @@ properties: phy-handle: true + phys: + maxItems: 1 + + resets: + maxItems: 1 + description: + Recommended with ZynqMP, specify reset control for this + controller instance with zynqmp-reset driver. + + reset-names: + maxItems: 1 + fixed-link: true iommus: @@ -110,6 +122,7 @@ patternProperties: reset-gpios: true magic-packet: + type: boolean description: Indicates that the hardware supports waking up via magic packet. @@ -157,3 +170,38 @@ examples: reset-gpios = <&pioE 6 1>; }; }; + + - | + #include <dt-bindings/clock/xlnx-zynqmp-clk.h> + #include <dt-bindings/power/xlnx-zynqmp-power.h> + #include <dt-bindings/reset/xlnx-zynqmp-resets.h> + #include <dt-bindings/phy/phy.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + gem1: ethernet@ff0c0000 { + compatible = "cdns,zynqmp-gem", "cdns,gem"; + interrupt-parent = <&gic>; + interrupts = <0 59 4>, <0 59 4>; + reg = <0x0 0xff0c0000 0x0 0x1000>; + clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_REF>, + <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_RX>, + <&zynqmp_clk GEM_TSU>; + clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk"; + #address-cells = <1>; + #size-cells = <0>; + iommus = <&smmu 0x875>; + power-domains = <&zynqmp_firmware PD_ETH_1>; + resets = <&zynqmp_reset ZYNQMP_RESET_GEM1>; + reset-names = "gem1_rst"; + status = "okay"; + phy-mode = "sgmii"; + phys = <&psgtr 1 PHY_TYPE_SGMII 1 1>; + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt deleted file mode 100644 index 6c559981d110..000000000000 --- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.txt +++ /dev/null @@ -1,92 +0,0 @@ -Cortina Systems Gemini Ethernet Controller -========================================== - -This ethernet controller is found in the Gemini SoC family: -StorLink SL3512 and SL3516, also known as Cortina Systems -CS3512 and CS3516. - -Required properties: -- compatible: must be "cortina,gemini-ethernet" -- reg: must contain the global registers and the V-bit and A-bit - memory areas, in total three register sets. -- syscon: a phandle to the system controller -- #address-cells: must be specified, must be <1> -- #size-cells: must be specified, must be <1> -- ranges: should be state like this giving a 1:1 address translation - for the subnodes - -The subnodes represents the two ethernet ports in this device. -They are not independent of each other since they share resources -in the parent node, and are thus children. - -Required subnodes: -- port0: contains the resources for ethernet port 0 -- port1: contains the resources for ethernet port 1 - -Required subnode properties: -- compatible: must be "cortina,gemini-ethernet-port" -- reg: must contain two register areas: the DMA/TOE memory and - the GMAC memory area of the port -- interrupts: should contain the interrupt line of the port. - this is nominally a level interrupt active high. -- resets: this must provide an SoC-integrated reset line for - the port. -- clocks: this should contain a handle to the PCLK clock for - clocking the silicon in this port -- clock-names: must be "PCLK" - -Optional subnode properties: -- phy-mode: see ethernet.txt -- phy-handle: see ethernet.txt - -Example: - -mdio-bus { - (...) - phy0: ethernet-phy@1 { - reg = <1>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@3 { - reg = <3>; - device_type = "ethernet-phy"; - }; -}; - - -ethernet@60000000 { - compatible = "cortina,gemini-ethernet"; - reg = <0x60000000 0x4000>, /* Global registers, queue */ - <0x60004000 0x2000>, /* V-bit */ - <0x60006000 0x2000>; /* A-bit */ - syscon = <&syscon>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gmac0: ethernet-port@0 { - compatible = "cortina,gemini-ethernet-port"; - reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ - <0x6000a000 0x2000>; /* Port 0 GMAC */ - interrupt-parent = <&intcon>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon GEMINI_RESET_GMAC0>; - clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; - clock-names = "PCLK"; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - }; - - gmac1: ethernet-port@1 { - compatible = "cortina,gemini-ethernet-port"; - reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ - <0x6000e000 0x2000>; /* Port 1 GMAC */ - interrupt-parent = <&intcon>; - interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; - resets = <&syscon GEMINI_RESET_GMAC1>; - clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; - clock-names = "PCLK"; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - }; -}; diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml new file mode 100644 index 000000000000..cc01b9b5752a --- /dev/null +++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/cortina,gemini-ethernet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cortina Systems Gemini Ethernet Controller + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: | + This ethernet controller is found in the Gemini SoC family: + StorLink SL3512 and SL3516, also known as Cortina Systems + CS3512 and CS3516. + +properties: + compatible: + const: cortina,gemini-ethernet + + reg: + minItems: 3 + description: must contain the global registers and the V-bit and A-bit + memory areas, in total three register sets. + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +#The subnodes represents the two ethernet ports in this device. +#They are not independent of each other since they share resources +#in the parent node, and are thus children. +patternProperties: + "^ethernet-port@[0-9]+$": + type: object + description: contains the resources for ethernet port + allOf: + - $ref: ethernet-controller.yaml# + properties: + compatible: + const: cortina,gemini-ethernet-port + + reg: + items: + - description: DMA/TOE memory + - description: GMAC memory area of the port + + interrupts: + maxItems: 1 + description: should contain the interrupt line of the port. + this is nominally a level interrupt active high. + + resets: + maxItems: 1 + description: this must provide an SoC-integrated reset line for the port. + + clocks: + maxItems: 1 + description: this should contain a handle to the PCLK clock for + clocking the silicon in this port + + clock-names: + const: PCLK + + required: + - reg + - compatible + - interrupts + - resets + - clocks + - clock-names + +required: + - compatible + - reg + - ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/cortina,gemini-clock.h> + #include <dt-bindings/reset/cortina,gemini-reset.h> + mdio0: mdio { + #address-cells = <1>; + #size-cells = <0>; + phy0: ethernet-phy@1 { + reg = <1>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@3 { + reg = <3>; + device_type = "ethernet-phy"; + }; + }; + + + ethernet@60000000 { + compatible = "cortina,gemini-ethernet"; + reg = <0x60000000 0x4000>, /* Global registers, queue */ + <0x60004000 0x2000>, /* V-bit */ + <0x60006000 0x2000>; /* A-bit */ + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gmac0: ethernet-port@0 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x60008000 0x2000>, /* Port 0 DMA/TOE */ + <0x6000a000 0x2000>; /* Port 0 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC0>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC0>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + + gmac1: ethernet-port@1 { + compatible = "cortina,gemini-ethernet-port"; + reg = <0x6000c000 0x2000>, /* Port 1 DMA/TOE */ + <0x6000e000 0x2000>; /* Port 1 GMAC */ + interrupt-parent = <&intcon>; + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; + resets = <&syscon GEMINI_RESET_GMAC1>; + clocks = <&syscon GEMINI_CLK_GATE_GMAC1>; + clock-names = "PCLK"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/davicom,dm9051.yaml b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml new file mode 100644 index 000000000000..52e852fef753 --- /dev/null +++ b/Documentation/devicetree/bindings/net/davicom,dm9051.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/davicom,dm9051.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Davicom DM9051 SPI Ethernet Controller + +maintainers: + - Joseph CHANG <josright123@gmail.com> + +description: | + The DM9051 is a fully integrated and cost-effective low pin count single + chip Fast Ethernet controller with a Serial Peripheral Interface (SPI). + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: davicom,dm9051 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 45000000 + + interrupts: + maxItems: 1 + + local-mac-address: true + + mac-address: true + +required: + - compatible + - reg + - spi-max-frequency + - interrupts + +additionalProperties: false + +examples: + # Raspberry Pi platform + - | + /* for Raspberry Pi with pin control stuff for GPIO irq */ + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@0 { + compatible = "davicom,dm9051"; + reg = <0>; /* spi chip select */ + local-mac-address = [00 00 00 00 00 00]; + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <31200000>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml index c3c938893ad9..23114d691d2a 100644 --- a/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml +++ b/Documentation/devicetree/bindings/net/dsa/brcm,b53.yaml @@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Broadcom BCM53xx Ethernet switches -allOf: - - $ref: dsa.yaml# - maintainers: - Florian Fainelli <f.fainelli@gmail.com> @@ -68,53 +65,71 @@ required: - compatible - reg -# BCM585xx/586xx/88312 SoCs -if: - properties: - compatible: - contains: - enum: - - brcm,bcm58522-srab - - brcm,bcm58523-srab - - brcm,bcm58525-srab - - brcm,bcm58622-srab - - brcm,bcm58623-srab - - brcm,bcm58625-srab - - brcm,bcm88312-srab -then: - properties: - reg: - minItems: 3 - maxItems: 3 - reg-names: - items: - - const: srab - - const: mux_config - - const: sgmii_config - interrupts: - minItems: 13 - maxItems: 13 - interrupt-names: - items: - - const: link_state_p0 - - const: link_state_p1 - - const: link_state_p2 - - const: link_state_p3 - - const: link_state_p4 - - const: link_state_p5 - - const: link_state_p7 - - const: link_state_p8 - - const: phy - - const: ts - - const: imp_sleep_timer_p5 - - const: imp_sleep_timer_p7 - - const: imp_sleep_timer_p8 - required: - - interrupts -else: - properties: - reg: - maxItems: 1 +allOf: + - $ref: dsa.yaml# + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm5325 + - brcm,bcm53115 + - brcm,bcm53125 + - brcm,bcm53128 + - brcm,bcm5365 + - brcm,bcm5395 + - brcm,bcm5397 + - brcm,bcm5398 + then: + $ref: /schemas/spi/spi-peripheral-props.yaml + + # BCM585xx/586xx/88312 SoCs + - if: + properties: + compatible: + contains: + enum: + - brcm,bcm58522-srab + - brcm,bcm58523-srab + - brcm,bcm58525-srab + - brcm,bcm58622-srab + - brcm,bcm58623-srab + - brcm,bcm58625-srab + - brcm,bcm88312-srab + then: + properties: + reg: + minItems: 3 + maxItems: 3 + reg-names: + items: + - const: srab + - const: mux_config + - const: sgmii_config + interrupts: + minItems: 13 + maxItems: 13 + interrupt-names: + items: + - const: link_state_p0 + - const: link_state_p1 + - const: link_state_p2 + - const: link_state_p3 + - const: link_state_p4 + - const: link_state_p5 + - const: link_state_p7 + - const: link_state_p8 + - const: phy + - const: ts + - const: imp_sleep_timer_p5 + - const: imp_sleep_timer_p7 + - const: imp_sleep_timer_p8 + required: + - interrupts + else: + properties: + reg: + maxItems: 1 unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml index 702df848a71d..09317e16cb5d 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml @@ -15,7 +15,7 @@ description: Ethernet switch port Description allOf: - - $ref: "http://devicetree.org/schemas/net/ethernet-controller.yaml#" + - $ref: /schemas/net/ethernet-controller.yaml# properties: reg: @@ -34,6 +34,8 @@ properties: full routing information must be given, not just the one hop routes to neighbouring switches $ref: /schemas/types.yaml#/definitions/phandle-array + items: + maxItems: 1 ethernet: description: @@ -51,6 +53,8 @@ properties: - edsa - ocelot - ocelot-8021q + - rtl8_4 + - rtl8_4t - seville phy-handle: true diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index 84985f53bffd..6bbd8145b6c1 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -12,6 +12,7 @@ maintainers: allOf: - $ref: dsa.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# properties: # See Documentation/devicetree/bindings/net/dsa/dsa.yaml for a list of additional @@ -42,6 +43,12 @@ properties: description: Set if the output SYNCLKO frequency should be set to 125MHz instead of 25MHz. + microchip,synclko-disable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Set if the output SYNCLKO clock should be disabled. Do not mix with + microchip,synclko-125. + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml index 1ea0bd490473..1e26d876d146 100644 --- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml +++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml @@ -14,6 +14,7 @@ description: allOf: - $ref: "dsa.yaml#" + - $ref: /schemas/spi/spi-peripheral-props.yaml# maintainers: - Vladimir Oltean <vladimir.oltean@nxp.com> diff --git a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt b/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt deleted file mode 100644 index 7959ec237983..000000000000 --- a/Documentation/devicetree/bindings/net/dsa/realtek-smi.txt +++ /dev/null @@ -1,240 +0,0 @@ -Realtek SMI-based Switches -========================== - -The SMI "Simple Management Interface" is a two-wire protocol using -bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does -not use the MDIO protocol. This binding defines how to specify the -SMI-based Realtek devices. - -Required properties: - -- compatible: must be exactly one of: - "realtek,rtl8365mb" (4+1 ports) - "realtek,rtl8366" - "realtek,rtl8366rb" (4+1 ports) - "realtek,rtl8366s" (4+1 ports) - "realtek,rtl8367" - "realtek,rtl8367b" - "realtek,rtl8368s" (8 port) - "realtek,rtl8369" - "realtek,rtl8370" (8 port) - -Required properties: -- mdc-gpios: GPIO line for the MDC clock line. -- mdio-gpios: GPIO line for the MDIO data line. -- reset-gpios: GPIO line for the reset signal. - -Optional properties: -- realtek,disable-leds: if the LED drivers are not used in the - hardware design this will disable them so they are not turned on - and wasting power. - -Required subnodes: - -- interrupt-controller - - This defines an interrupt controller with an IRQ line (typically - a GPIO) that will demultiplex and handle the interrupt from the single - interrupt line coming out of one of the SMI-based chips. It most - importantly provides link up/down interrupts to the PHY blocks inside - the ASIC. - -Required properties of interrupt-controller: - -- interrupt: parent interrupt, see interrupt-controller/interrupts.txt -- interrupt-controller: see interrupt-controller/interrupts.txt -- #address-cells: should be <0> -- #interrupt-cells: should be <1> - -- mdio - - This defines the internal MDIO bus of the SMI device, mostly for the - purpose of being able to hook the interrupts to the right PHY and - the right PHY to the corresponding port. - -Required properties of mdio: - -- compatible: should be set to "realtek,smi-mdio" for all SMI devices - -See net/mdio.txt for additional MDIO bus properties. - -See net/dsa/dsa.txt for a list of additional required and optional properties -and subnodes of DSA switches. - -Examples: - -An example for the RTL8366RB: - -switch { - compatible = "realtek,rtl8366rb"; - /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */ - mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; - mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - - switch_intc: interrupt-controller { - /* GPIO 15 provides the interrupt */ - interrupt-parent = <&gpio0>; - interrupts = <15 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - port@0 { - reg = <0>; - label = "lan0"; - phy-handle = <&phy0>; - }; - port@1 { - reg = <1>; - label = "lan1"; - phy-handle = <&phy1>; - }; - port@2 { - reg = <2>; - label = "lan2"; - phy-handle = <&phy2>; - }; - port@3 { - reg = <3>; - label = "lan3"; - phy-handle = <&phy3>; - }; - port@4 { - reg = <4>; - label = "wan"; - phy-handle = <&phy4>; - }; - port@5 { - reg = <5>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - compatible = "realtek,smi-mdio", "dsa-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - phy0: phy@0 { - reg = <0>; - interrupt-parent = <&switch_intc>; - interrupts = <0>; - }; - phy1: phy@1 { - reg = <1>; - interrupt-parent = <&switch_intc>; - interrupts = <1>; - }; - phy2: phy@2 { - reg = <2>; - interrupt-parent = <&switch_intc>; - interrupts = <2>; - }; - phy3: phy@3 { - reg = <3>; - interrupt-parent = <&switch_intc>; - interrupts = <3>; - }; - phy4: phy@4 { - reg = <4>; - interrupt-parent = <&switch_intc>; - interrupts = <12>; - }; - }; -}; - -An example for the RTL8365MB-VC: - -switch { - compatible = "realtek,rtl8365mb"; - mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; - mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; - - switch_intc: interrupt-controller { - interrupt-parent = <&gpio5>; - interrupts = <1 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - - ports { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - port@0 { - reg = <0>; - label = "swp0"; - phy-handle = <ðphy0>; - }; - port@1 { - reg = <1>; - label = "swp1"; - phy-handle = <ðphy1>; - }; - port@2 { - reg = <2>; - label = "swp2"; - phy-handle = <ðphy2>; - }; - port@3 { - reg = <3>; - label = "swp3"; - phy-handle = <ðphy3>; - }; - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&fec1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <2000>; - rx-internal-delay-ps = <2000>; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - }; - }; - }; - - mdio { - compatible = "realtek,smi-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - ethphy0: phy@0 { - reg = <0>; - interrupt-parent = <&switch_intc>; - interrupts = <0>; - }; - ethphy1: phy@1 { - reg = <1>; - interrupt-parent = <&switch_intc>; - interrupts = <1>; - }; - ethphy2: phy@2 { - reg = <2>; - interrupt-parent = <&switch_intc>; - interrupts = <2>; - }; - ethphy3: phy@3 { - reg = <3>; - interrupt-parent = <&switch_intc>; - interrupts = <3>; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml new file mode 100644 index 000000000000..4f99aff029dc --- /dev/null +++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml @@ -0,0 +1,388 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/dsa/realtek.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek switches for unmanaged switches + +allOf: + - $ref: dsa.yaml# + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + Realtek advertises these chips as fast/gigabit switches or unmanaged + switches. They can be controlled using different interfaces, like SMI, + MDIO or SPI. + + The SMI "Simple Management Interface" is a two-wire protocol using + bit-banged GPIO that while it reuses the MDIO lines MCK and MDIO does + not use the MDIO protocol. This binding defines how to specify the + SMI-based Realtek devices. The realtek-smi driver is a platform driver + and it must be inserted inside a platform node. + + The MDIO-connected switches use MDIO protocol to access their registers. + The realtek-mdio driver is an MDIO driver and it must be inserted inside + an MDIO node. + + The compatible string is only used to identify which (silicon) family the + switch belongs to. Roughly speaking, a family is any set of Realtek switches + whose chip identification register(s) have a common location and semantics. + The different models in a given family can be automatically disambiguated by + parsing the chip identification register(s) according to the given family, + avoiding the need for a unique compatible string for each model. + +properties: + compatible: + enum: + - realtek,rtl8365mb + - realtek,rtl8366rb + description: | + realtek,rtl8365mb: + Use with models RTL8363NB, RTL8363NB-VB, RTL8363SC, RTL8363SC-VB, + RTL8364NB, RTL8364NB-VB, RTL8365MB, RTL8366SC, RTL8367RB-VB, RTL8367S, + RTL8367SB, RTL8370MB, RTL8310SR + realtek,rtl8366rb: + Use with models RTL8366RB, RTL8366S + + mdc-gpios: + description: GPIO line for the MDC clock line. + maxItems: 1 + + mdio-gpios: + description: GPIO line for the MDIO data line. + maxItems: 1 + + reset-gpios: + description: GPIO to be used to reset the whole device + maxItems: 1 + + realtek,disable-leds: + type: boolean + description: | + if the LED drivers are not used in the hardware design, + this will disable them so they are not turned on + and wasting power. + + interrupt-controller: + type: object + description: | + This defines an interrupt controller with an IRQ line (typically + a GPIO) that will demultiplex and handle the interrupt from the single + interrupt line coming out of one of the Realtek switch chips. It most + importantly provides link up/down interrupts to the PHY blocks inside + the ASIC. + + properties: + + interrupt-controller: true + + interrupts: + maxItems: 1 + description: + A single IRQ line from the switch, either active LOW or HIGH + + '#address-cells': + const: 0 + + '#interrupt-cells': + const: 1 + + required: + - interrupt-controller + - '#address-cells' + - '#interrupt-cells' + + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + + properties: + compatible: + const: realtek,smi-mdio + +if: + required: + - reg + +then: + $ref: /schemas/spi/spi-peripheral-props.yaml# + not: + required: + - mdc-gpios + - mdio-gpios + - mdio + + properties: + mdc-gpios: false + mdio-gpios: false + mdio: false + +else: + required: + - mdc-gpios + - mdio-gpios + - mdio + - reset-gpios + +required: + - compatible + + # - mdc-gpios + # - mdio-gpios + # - reset-gpios + # - mdio + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + platform { + switch { + compatible = "realtek,rtl8366rb"; + /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */ + mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + mdio-gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + + switch_intc1: interrupt-controller { + /* GPIO 15 provides the interrupt */ + interrupt-parent = <&gpio0>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "lan0"; + phy-handle = <&phy0>; + }; + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&phy1>; + }; + port@2 { + reg = <2>; + label = "lan2"; + phy-handle = <&phy2>; + }; + port@3 { + reg = <3>; + label = "lan3"; + phy-handle = <&phy3>; + }; + port@4 { + reg = <4>; + label = "wan"; + phy-handle = <&phy4>; + }; + port@5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + phy-mode = "rgmii"; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&switch_intc1>; + interrupts = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&switch_intc1>; + interrupts = <1>; + }; + phy2: ethernet-phy@2 { + reg = <2>; + interrupt-parent = <&switch_intc1>; + interrupts = <2>; + }; + phy3: ethernet-phy@3 { + reg = <3>; + interrupt-parent = <&switch_intc1>; + interrupts = <3>; + }; + phy4: ethernet-phy@4 { + reg = <4>; + interrupt-parent = <&switch_intc1>; + interrupts = <12>; + }; + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + platform { + switch { + compatible = "realtek,rtl8365mb"; + mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + + switch_intc2: interrupt-controller { + interrupt-parent = <&gpio5>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + label = "swp0"; + phy-handle = <ðphy0>; + }; + port@1 { + reg = <1>; + label = "swp1"; + phy-handle = <ðphy1>; + }; + port@2 { + reg = <2>; + label = "swp2"; + phy-handle = <ðphy2>; + }; + port@3 { + reg = <3>; + label = "swp3"; + phy-handle = <ðphy3>; + }; + port@6 { + reg = <6>; + label = "cpu"; + ethernet = <&fec1>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <2000>; + + fixed-link { + speed = <1000>; + full-duplex; + pause; + }; + }; + }; + + mdio { + compatible = "realtek,smi-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + interrupt-parent = <&switch_intc2>; + interrupts = <0>; + }; + ethphy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&switch_intc2>; + interrupts = <1>; + }; + ethphy2: ethernet-phy@2 { + reg = <2>; + interrupt-parent = <&switch_intc2>; + interrupts = <2>; + }; + ethphy3: ethernet-phy@3 { + reg = <3>; + interrupt-parent = <&switch_intc2>; + interrupts = <3>; + }; + }; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + switch@29 { + compatible = "realtek,rtl8365mb"; + reg = <29>; + + reset-gpios = <&gpio2 20 GPIO_ACTIVE_LOW>; + + switch_intc3: interrupt-controller { + interrupt-parent = <&gpio0>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@7 { + reg = <7>; + ethernet = <ðernet>; + phy-mode = "rgmii"; + tx-internal-delay-ps = <2000>; + rx-internal-delay-ps = <0>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index 34c5463abcec..4f15463611f8 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -13,6 +13,10 @@ properties: $nodename: pattern: "^ethernet(@.*)?$" + label: + $ref: /schemas/types.yaml#/definitions/string + description: Human readable label on a port of a box. + local-mac-address: description: Specifies the MAC address that was assigned to the network device. @@ -102,6 +106,12 @@ properties: phy-mode: $ref: "#/properties/phy-connection-type" + pcs-handle: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Specifies a reference to a node representing a PCS PHY device on a MDIO + bus to link with an external PHY (phy-handle) if exists. + phy-handle: $ref: /schemas/types.yaml#/definitions/phandle description: diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index ee42328a109d..ed1415a4381f 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -77,6 +77,15 @@ properties: description: Maximum PHY supported speed in Mbits / seconds. + phy-10base-t1l-2.4vpp: + description: | + tristate, request/disable 2.4 Vpp operating mode. The values are: + 0: Disable 2.4 Vpp operating mode. + 1: Request 2.4 Vpp operating mode from link partner. + Absence of this property will leave configuration to default values. + $ref: "/schemas/types.yaml#/definitions/uint32" + enum: [0, 1] + broken-turn-around: $ref: /schemas/types.yaml#/definitions/flag description: diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index fd8371e31867..daa2f79a294f 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -158,11 +158,13 @@ properties: fsl,stop-mode: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to general purpose register node + - description: the gpr register offset for ENET stop request + - description: the gpr bit offset for ENET stop request description: Register bits of stop mode control, the format is <&gpr req_gpr req_bit>. - gpr is the phandle to general purpose register node. - req_gpr is the gpr register offset for ENET stop request. - req_bit is the gpr bit offset for ENET stop request. mdio: $ref: mdio.yaml# diff --git a/Documentation/devicetree/bindings/net/fsl-fman.txt b/Documentation/devicetree/bindings/net/fsl-fman.txt index 020337f3c05f..801efc7d6818 100644 --- a/Documentation/devicetree/bindings/net/fsl-fman.txt +++ b/Documentation/devicetree/bindings/net/fsl-fman.txt @@ -388,14 +388,24 @@ PROPERTIES Value type: <prop-encoded-array> Definition: A standard property. -- bus-frequency +- clocks + Usage: optional + Value type: <phandle> + Definition: A reference to the input clock of the controller + from which the MDC frequency is derived. + +- clock-frequency Usage: optional Value type: <u32> - Definition: Specifies the external MDIO bus clock speed to - be used, if different from the standard 2.5 MHz. - This may be due to the standard speed being unsupported (e.g. - due to a hardware problem), or to advertise that all relevant - components in the system support a faster speed. + Definition: Specifies the external MDC frequency, in Hertz, to + be used. Requires that the input clock is specified in the + "clocks" property. See also: mdio.yaml. + +- suppress-preamble + Usage: optional + Value type: <boolean> + Definition: Disable generation of preamble bits. See also: + mdio.yaml. - interrupts Usage: required for external MDIO diff --git a/Documentation/devicetree/bindings/net/ingenic,mac.yaml b/Documentation/devicetree/bindings/net/ingenic,mac.yaml index 8e52b2e683b8..93b3e991d209 100644 --- a/Documentation/devicetree/bindings/net/ingenic,mac.yaml +++ b/Documentation/devicetree/bindings/net/ingenic,mac.yaml @@ -37,6 +37,7 @@ properties: const: stmmaceth mode-reg: + $ref: /schemas/types.yaml#/definitions/phandle description: An extra syscon register that control ethernet interface and timing delay rx-clk-delay-ps: diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml index 67eaf02dda80..4e1b79818aff 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml @@ -29,12 +29,18 @@ properties: queue-rx: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the RX queue node + - description: RX queue instance to use description: phandle to the RX queue on the NPE queue-txready: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the TX READY queue node + - description: TX READY queue instance to use description: phandle to the TX READY queue on the NPE phy-mode: true @@ -43,7 +49,10 @@ properties: intel,npe-handle: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the NPE this ethernet instance is using + - description: the NPE instance to use description: phandle to the NPE this ethernet instance is using and the instance to use in the second cell diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml index 4dcd53c3e0b4..e6329febb60c 100644 --- a/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml +++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-hss.yaml @@ -25,39 +25,62 @@ properties: intel,npe-handle: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + items: + - description: phandle to the NPE this HSS instance is using + - description: the NPE instance number description: phandle to the NPE this HSS instance is using and the instance to use in the second cell intel,queue-chl-rxtrig: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the RX trigger queue on the NPE + - description: the queue instance number description: phandle to the RX trigger queue on the NPE intel,queue-chl-txready: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the TX ready queue on the NPE + - description: the queue instance number description: phandle to the TX ready queue on the NPE intel,queue-pkt-rx: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the RX queue on the NPE + - description: the queue instance number description: phandle to the packet RX queue on the NPE intel,queue-pkt-tx: $ref: '/schemas/types.yaml#/definitions/phandle-array' maxItems: 4 + items: + items: + - description: phandle to the TX queue on the NPE + - description: the queue instance number description: phandle to the packet TX0, TX1, TX2 and TX3 queues on the NPE intel,queue-pkt-rxfree: $ref: '/schemas/types.yaml#/definitions/phandle-array' maxItems: 4 + items: + items: + - description: phandle to the RXFREE queue on the NPE + - description: the queue instance number description: phandle to the packet RXFREE0, RXFREE1, RXFREE2 and RXFREE3 queues on the NPE intel,queue-pkt-txdone: $ref: '/schemas/types.yaml#/definitions/phandle-array' - maxItems: 1 + items: + - items: + - description: phandle to the TXDONE queue on the NPE + - description: the queue instance number description: phandle to the packet TXDONE queue on the NPE cts-gpios: diff --git a/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml new file mode 100644 index 000000000000..d2906b4a0f59 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell,orion-mdio.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/marvell,orion-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MDIO Ethernet Controller interface + +maintainers: + - Andrew Lunn <andrew@lunn.ch> + +description: | + The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, MV78xx0, + Armada 370, Armada XP, Armada 7k and Armada 8k have an identical unit that + provides an interface with the MDIO bus. Additionally, Armada 7k and Armada + 8k has a second unit which provides an interface with the xMDIO bus. This + driver handles these interfaces. + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - marvell,orion-mdio + - marvell,xmdio + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 4 + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + mdio@d0072004 { + compatible = "marvell,orion-mdio"; + reg = <0xd0072004 0x4>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <30>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index 691f886cfc4a..2bf31572b08d 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -5,6 +5,7 @@ Required properties: "marvell,armada-370-neta" "marvell,armada-xp-neta" "marvell,armada-3700-neta" + "marvell,armada-ac5-neta" - reg: address and length of the register set for the device. - interrupts: interrupt for the device - phy: See ethernet.txt file in the same directory. diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt deleted file mode 100644 index 3f3cfc1d8d4d..000000000000 --- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt +++ /dev/null @@ -1,54 +0,0 @@ -* Marvell MDIO Ethernet Controller interface - -The Ethernet controllers of the Marvel Kirkwood, Dove, Orion5x, -MV78xx0, Armada 370, Armada XP, Armada 7k and Armada 8k have an -identical unit that provides an interface with the MDIO bus. -Additionally, Armada 7k and Armada 8k has a second unit which -provides an interface with the xMDIO bus. This driver handles -these interfaces. - -Required properties: -- compatible: "marvell,orion-mdio" or "marvell,xmdio" -- reg: address and length of the MDIO registers. When an interrupt is - not present, the length is the size of the SMI register (4 bytes) - otherwise it must be 0x84 bytes to cover the interrupt control - registers. - -Optional properties: -- interrupts: interrupt line number for the SMI error/done interrupt -- clocks: phandle for up to four required clocks for the MDIO instance - -The child nodes of the MDIO driver are the individual PHY devices -connected to this MDIO bus. They must have a "reg" property given the -PHY address on the MDIO bus. - -Example at the SoC level without an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x4>; -}; - -Example with an interrupt property: - -mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0xd0072004 0x84>; - interrupts = <30>; -}; - -And at the board level: - -mdio { - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -} diff --git a/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml new file mode 100644 index 000000000000..afd11c9422fa --- /dev/null +++ b/Documentation/devicetree/bindings/net/mctp-i2c-controller.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mctp-i2c-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MCTP I2C transport binding + +maintainers: + - Matt Johnston <matt@codeconstruct.com.au> + +description: | + An mctp-i2c-controller defines a local MCTP endpoint on an I2C controller. + MCTP I2C is specified by DMTF DSP0237. + + An mctp-i2c-controller must be attached to an I2C adapter which supports + slave functionality. I2C busses (either directly or as subordinate mux + busses) are attached to the mctp-i2c-controller with a 'mctp-controller' + property on each used bus. Each mctp-controller I2C bus will be presented + to the host system as a separate MCTP I2C instance. + +properties: + compatible: + const: mctp-i2c-controller + + reg: + minimum: 0x40000000 + maximum: 0x4000007f + description: | + 7 bit I2C address of the local endpoint. + I2C_OWN_SLAVE_ADDRESS (1<<30) flag must be set. + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + // Basic case of a single I2C bus + #include <dt-bindings/i2c/i2c.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + + mctp@30 { + compatible = "mctp-i2c-controller"; + reg = <(0x30 | I2C_OWN_SLAVE_ADDRESS)>; + }; + }; + + - | + // Mux topology with multiple MCTP-handling busses under + // a single mctp-i2c-controller. + // i2c1 and i2c6 can have MCTP devices, i2c5 does not. + #include <dt-bindings/i2c/i2c.h> + + i2c1: i2c { + #address-cells = <1>; + #size-cells = <0>; + mctp-controller; + + mctp@50 { + compatible = "mctp-i2c-controller"; + reg = <(0x50 | I2C_OWN_SLAVE_ADDRESS)>; + }; + }; + + i2c-mux { + #address-cells = <1>; + #size-cells = <0>; + i2c-parent = <&i2c1>; + + i2c5: i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + eeprom@33 { + reg = <0x33>; + }; + }; + + i2c6: i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + mctp-controller; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek,net.yaml b/Documentation/devicetree/bindings/net/mediatek,net.yaml new file mode 100644 index 000000000000..f5564ecddb62 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek,net.yaml @@ -0,0 +1,437 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mediatek,net.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek Frame Engine Ethernet controller + +maintainers: + - Lorenzo Bianconi <lorenzo@kernel.org> + - Felix Fietkau <nbd@nbd.name> + +description: + The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs + have dual GMAC ports. + +properties: + compatible: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + - mediatek,mt7622-eth + - mediatek,mt7629-eth + - mediatek,mt7986-eth + - ralink,rt5350-eth + + reg: + maxItems: 1 + + clocks: true + clock-names: true + + interrupts: + minItems: 3 + maxItems: 4 + + power-domains: + maxItems: 1 + + resets: + maxItems: 3 + + reset-names: + items: + - const: fe + - const: gmac + - const: ppe + + mediatek,ethsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the port setup. + + cci-control-port: true + + mediatek,hifsys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek hifsys controller used to provide various clocks + and reset to the system. + + mediatek,sgmiisys: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + items: + maxItems: 1 + description: + A list of phandle to the syscon node that handles the SGMII setup which is required for + those SoCs equipped with SGMII. + + dma-coherent: true + + mdio-bus: + $ref: mdio.yaml# + unevaluatedProperties: false + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +allOf: + - $ref: "ethernet-controller.yaml#" + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt2701-eth + - mediatek,mt7623-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 4 + maxItems: 4 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp1 + - const: gp2 + + mediatek,pctl: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the ports slew rate and + driver current. + + - if: + properties: + compatible: + contains: + const: mediatek,mt7622-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 11 + maxItems: 11 + + clock-names: + items: + - const: ethif + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,sgmiisys: + minItems: 1 + maxItems: 1 + + mediatek,wed: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 2 + maxItems: 2 + items: + maxItems: 1 + description: + List of phandles to wireless ethernet dispatch nodes. + + mediatek,pcie-mirror: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the mediatek pcie-mirror controller. + + - if: + properties: + compatible: + contains: + const: mediatek,mt7629-eth + then: + properties: + interrupts: + maxItems: 3 + + clocks: + minItems: 17 + maxItems: 17 + + clock-names: + items: + - const: ethif + - const: sgmiitop + - const: esw + - const: gp0 + - const: gp1 + - const: gp2 + - const: fe + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: sgmii_ck + - const: eth2pll + + mediatek,infracfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to the syscon node that handles the path from GMAC to + PHY variants. + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + + - if: + properties: + compatible: + contains: + const: mediatek,mt7986-eth + then: + properties: + interrupts: + minItems: 4 + + clocks: + minItems: 15 + maxItems: 15 + + clock-names: + items: + - const: fe + - const: gp2 + - const: gp1 + - const: wocpu1 + - const: wocpu0 + - const: sgmii_tx250m + - const: sgmii_rx250m + - const: sgmii_cdr_ref + - const: sgmii_cdr_fb + - const: sgmii2_tx250m + - const: sgmii2_rx250m + - const: sgmii2_cdr_ref + - const: sgmii2_cdr_fb + - const: netsys0 + - const: netsys1 + + mediatek,sgmiisys: + minItems: 2 + maxItems: 2 + +patternProperties: + "^mac@[0-1]$": + type: object + additionalProperties: false + allOf: + - $ref: ethernet-controller.yaml# + description: + Ethernet MAC node + properties: + compatible: + const: mediatek,eth-mac + + reg: + maxItems: 1 + + phy-handle: true + + phy-mode: true + + required: + - reg + - compatible + - phy-handle + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - mediatek,ethsys + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7622-clk.h> + #include <dt-bindings/power/mt7622-power.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + ethernet: ethernet@1b100000 { + compatible = "mediatek,mt7622-eth"; + reg = <0 0x1b100000 0 0x20000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 224 IRQ_TYPE_LEVEL_LOW>, + <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>; + clocks = <&topckgen CLK_TOP_ETH_SEL>, + <ðsys CLK_ETH_ESW_EN>, + <ðsys CLK_ETH_GP0_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_GP2_EN>, + <&sgmiisys CLK_SGMII_TX250M_EN>, + <&sgmiisys CLK_SGMII_RX250M_EN>, + <&sgmiisys CLK_SGMII_CDR_REF>, + <&sgmiisys CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_SGMIIPLL>, + <&apmixedsys CLK_APMIXED_ETH2PLL>; + clock-names = "ethif", "esw", "gp0", "gp1", "gp2", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", + "eth2pll"; + power-domains = <&scpsys MT7622_POWER_DOMAIN_ETHSYS>; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys>; + cci-control-port = <&cci_control2>; + mediatek,pcie-mirror = <&pcie_mirror>; + mediatek,hifsys = <&hifsys>; + dma-coherent; + + #address-cells = <1>; + #size-cells = <0>; + + mdio0: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + gmac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + reg = <0>; + }; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + reg = <1>; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/mt7622-clk.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + eth: ethernet@15100000 { + #define CLK_ETH_FE_EN 0 + #define CLK_ETH_WOCPU1_EN 3 + #define CLK_ETH_WOCPU0_EN 4 + #define CLK_TOP_NETSYS_SEL 43 + #define CLK_TOP_NETSYS_500M_SEL 44 + #define CLK_TOP_NETSYS_2X_SEL 46 + #define CLK_TOP_SGM_325M_SEL 47 + #define CLK_APMIXED_NET2PLL 1 + #define CLK_APMIXED_SGMPLL 3 + + compatible = "mediatek,mt7986-eth"; + reg = <0 0x15100000 0 0x80000>; + interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>; + clocks = <ðsys CLK_ETH_FE_EN>, + <ðsys CLK_ETH_GP2_EN>, + <ðsys CLK_ETH_GP1_EN>, + <ðsys CLK_ETH_WOCPU1_EN>, + <ðsys CLK_ETH_WOCPU0_EN>, + <&sgmiisys0 CLK_SGMII_TX250M_EN>, + <&sgmiisys0 CLK_SGMII_RX250M_EN>, + <&sgmiisys0 CLK_SGMII_CDR_REF>, + <&sgmiisys0 CLK_SGMII_CDR_FB>, + <&sgmiisys1 CLK_SGMII_TX250M_EN>, + <&sgmiisys1 CLK_SGMII_RX250M_EN>, + <&sgmiisys1 CLK_SGMII_CDR_REF>, + <&sgmiisys1 CLK_SGMII_CDR_FB>, + <&topckgen CLK_TOP_NETSYS_SEL>, + <&topckgen CLK_TOP_NETSYS_SEL>; + clock-names = "fe", "gp2", "gp1", "wocpu1", "wocpu0", + "sgmii_tx250m", "sgmii_rx250m", + "sgmii_cdr_ref", "sgmii_cdr_fb", + "sgmii2_tx250m", "sgmii2_rx250m", + "sgmii2_cdr_ref", "sgmii2_cdr_fb", + "netsys0", "netsys1"; + mediatek,ethsys = <ðsys>; + mediatek,sgmiisys = <&sgmiisys0>, <&sgmiisys1>; + assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>, + <&topckgen CLK_TOP_SGM_325M_SEL>; + assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>, + <&apmixedsys CLK_APMIXED_SGMPLL>; + + #address-cells = <1>; + #size-cells = <0>; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + + phy5: ethernet-phy@0 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reset-gpios = <&pio 6 1>; + reset-deassert-us = <20000>; + reg = <5>; + }; + + phy6: ethernet-phy@1 { + compatible = "ethernet-phy-id67c9.de0a"; + phy-mode = "2500base-x"; + reg = <6>; + }; + }; + + mac0: mac@0 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy5>; + reg = <0>; + }; + + mac1: mac@1 { + compatible = "mediatek,eth-mac"; + phy-mode = "2500base-x"; + phy-handle = <&phy6>; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt b/Documentation/devicetree/bindings/net/mediatek-dwmac.txt deleted file mode 100644 index afbcaebf062e..000000000000 --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.txt +++ /dev/null @@ -1,91 +0,0 @@ -MediaTek DWMAC glue layer controller - -This file documents platform glue layer for stmmac. -Please see stmmac.txt for the other unchanged properties. - -The device node has following properties. - -Required properties: -- compatible: Should be "mediatek,mt2712-gmac" for MT2712 SoC -- reg: Address and length of the register set for the device -- interrupts: Should contain the MAC interrupts -- interrupt-names: Should contain a list of interrupt names corresponding to - the interrupts in the interrupts property, if available. - Should be "macirq" for the main MAC IRQ -- clocks: Must contain a phandle for each entry in clock-names. -- clock-names: The name of the clock listed in the clocks property. These are - "axi", "apb", "mac_main", "ptp_ref", "rmii_internal" for MT2712 SoC. -- mac-address: See ethernet.txt in the same directory -- phy-mode: See ethernet.txt in the same directory -- mediatek,pericfg: A phandle to the syscon node that control ethernet - interface and timing delay. - -Optional properties: -- mediatek,tx-delay-ps: TX clock delay macro value. Default is 0. - It should be defined for RGMII/MII interface. - It should be defined for RMII interface when the reference clock is from MT2712 SoC. -- mediatek,rx-delay-ps: RX clock delay macro value. Default is 0. - It should be defined for RGMII/MII interface. - It should be defined for RMII interface. -Both delay properties need to be a multiple of 170 for RGMII interface, -or will round down. Range 0~31*170. -Both delay properties need to be a multiple of 550 for MII/RMII interface, -or will round down. Range 0~31*550. - -- mediatek,rmii-rxc: boolean property, if present indicates that the RMII - reference clock, which is from external PHYs, is connected to RXC pin - on MT2712 SoC. - Otherwise, is connected to TXC pin. -- mediatek,rmii-clk-from-mac: boolean property, if present indicates that - MT2712 SoC provides the RMII reference clock, which outputs to TXC pin only. -- mediatek,txc-inverse: boolean property, if present indicates that - 1. tx clock will be inversed in MII/RGMII case, - 2. tx clock inside MAC will be inversed relative to reference clock - which is from external PHYs in RMII case, and it rarely happen. - 3. the reference clock, which outputs to TXC pin will be inversed in RMII case - when the reference clock is from MT2712 SoC. -- mediatek,rxc-inverse: boolean property, if present indicates that - 1. rx clock will be inversed in MII/RGMII case. - 2. reference clock will be inversed when arrived at MAC in RMII case, when - the reference clock is from external PHYs. - 3. the inside clock, which be sent to MAC, will be inversed in RMII case when - the reference clock is from MT2712 SoC. -- assigned-clocks: mac_main and ptp_ref clocks -- assigned-clock-parents: parent clocks of the assigned clocks - -Example: - eth: ethernet@1101c000 { - compatible = "mediatek,mt2712-gmac"; - reg = <0 0x1101c000 0 0x1300>; - interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; - interrupt-names = "macirq"; - phy-mode ="rgmii-rxid"; - mac-address = [00 55 7b b5 7d f7]; - clock-names = "axi", - "apb", - "mac_main", - "ptp_ref", - "rmii_internal"; - clocks = <&pericfg CLK_PERI_GMAC>, - <&pericfg CLK_PERI_GMAC_PCLK>, - <&topckgen CLK_TOP_ETHER_125M_SEL>, - <&topckgen CLK_TOP_ETHER_50M_SEL>, - <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>; - assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>, - <&topckgen CLK_TOP_ETHER_50M_SEL>, - <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>; - assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>, - <&topckgen CLK_TOP_APLL1_D3>, - <&topckgen CLK_TOP_ETHERPLL_50M>; - power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>; - mediatek,pericfg = <&pericfg>; - mediatek,tx-delay-ps = <1530>; - mediatek,rx-delay-ps = <1530>; - mediatek,rmii-rxc; - mediatek,txc-inverse; - mediatek,rxc-inverse; - snps,txpbl = <1>; - snps,rxpbl = <1>; - snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; - snps,reset-active-low; - }; diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml new file mode 100644 index 000000000000..61b2fb9e141b --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mediatek-dwmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek DWMAC glue layer controller + +maintainers: + - Biao Huang <biao.huang@mediatek.com> + +description: + This file documents platform glue layer for stmmac. + +# We need a select here so we don't match all nodes with 'snps,dwmac' +select: + properties: + compatible: + contains: + enum: + - mediatek,mt2712-gmac + - mediatek,mt8195-gmac + required: + - compatible + +allOf: + - $ref: "snps,dwmac.yaml#" + +properties: + compatible: + oneOf: + - items: + - enum: + - mediatek,mt2712-gmac + - const: snps,dwmac-4.20a + - items: + - enum: + - mediatek,mt8195-gmac + - const: snps,dwmac-5.10a + + clocks: + minItems: 5 + items: + - description: AXI clock + - description: APB clock + - description: MAC Main clock + - description: PTP clock + - description: RMII reference clock provided by MAC + - description: MAC clock gate + + clock-names: + minItems: 5 + items: + - const: axi + - const: apb + - const: mac_main + - const: ptp_ref + - const: rmii_internal + - const: mac_cg + + power-domains: + maxItems: 1 + + mediatek,pericfg: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle to the syscon node that control ethernet + interface and timing delay. + + mediatek,tx-delay-ps: + description: + The internal TX clock delay (provided by this driver) in nanoseconds. + For MT2712 RGMII interface, Allowed value need to be a multiple of 170, + or will round down. Range 0~31*170. + For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550, + or will round down. Range 0~31*550. + For MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple of 290, + or will round down. Range 0~31*290. + + mediatek,rx-delay-ps: + description: + The internal RX clock delay (provided by this driver) in nanoseconds. + For MT2712 RGMII interface, Allowed value need to be a multiple of 170, + or will round down. Range 0~31*170. + For MT2712 RMII/MII interface, Allowed value need to be a multiple of 550, + or will round down. Range 0~31*550. + For MT8195 RGMII/RMII/MII interface, Allowed value need to be a multiple + of 290, or will round down. Range 0~31*290. + + mediatek,rmii-rxc: + type: boolean + description: + If present, indicates that the RMII reference clock, which is from external + PHYs, is connected to RXC pin. Otherwise, is connected to TXC pin. + + mediatek,rmii-clk-from-mac: + type: boolean + description: + If present, indicates that MAC provides the RMII reference clock, which + outputs to TXC pin only. + + mediatek,txc-inverse: + type: boolean + description: + If present, indicates that + 1. tx clock will be inversed in MII/RGMII case, + 2. tx clock inside MAC will be inversed relative to reference clock + which is from external PHYs in RMII case, and it rarely happen. + 3. the reference clock, which outputs to TXC pin will be inversed in RMII case + when the reference clock is from MAC. + + mediatek,rxc-inverse: + type: boolean + description: + If present, indicates that + 1. rx clock will be inversed in MII/RGMII case. + 2. reference clock will be inversed when arrived at MAC in RMII case, when + the reference clock is from external PHYs. + 3. the inside clock, which be sent to MAC, will be inversed in RMII case when + the reference clock is from MAC. + + mediatek,mac-wol: + type: boolean + description: + If present, indicates that MAC supports WOL(Wake-On-LAN), and MAC WOL will be enabled. + Otherwise, PHY WOL is perferred. + +required: + - compatible + - reg + - interrupts + - interrupt-names + - clocks + - clock-names + - phy-mode + - mediatek,pericfg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/mt2712-clk.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/power/mt2712-power.h> + + eth: ethernet@1101c000 { + compatible = "mediatek,mt2712-gmac", "snps,dwmac-4.20a"; + reg = <0x1101c000 0x1300>; + interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "macirq"; + phy-mode ="rgmii-rxid"; + mac-address = [00 55 7b b5 7d f7]; + clock-names = "axi", + "apb", + "mac_main", + "ptp_ref", + "rmii_internal"; + clocks = <&pericfg CLK_PERI_GMAC>, + <&pericfg CLK_PERI_GMAC_PCLK>, + <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>; + assigned-clocks = <&topckgen CLK_TOP_ETHER_125M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_SEL>, + <&topckgen CLK_TOP_ETHER_50M_RMII_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_ETHERPLL_125M>, + <&topckgen CLK_TOP_APLL1_D3>, + <&topckgen CLK_TOP_ETHERPLL_50M>; + power-domains = <&scpsys MT2712_POWER_DOMAIN_AUDIO>; + mediatek,pericfg = <&pericfg>; + mediatek,tx-delay-ps = <1530>; + snps,txpbl = <1>; + snps,rxpbl = <1>; + snps,reset-gpio = <&pio 87 GPIO_ACTIVE_LOW>; + snps,reset-delays-us = <0 10000 10000>; + }; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt deleted file mode 100644 index 72d03e07cf7c..000000000000 --- a/Documentation/devicetree/bindings/net/mediatek-net.txt +++ /dev/null @@ -1,98 +0,0 @@ -MediaTek Frame Engine Ethernet controller -========================================= - -The frame engine ethernet controller can be found on MediaTek SoCs. These SoCs -have dual GMAC each represented by a child node.. - -* Ethernet controller node - -Required properties: -- compatible: Should be - "mediatek,mt2701-eth": for MT2701 SoC - "mediatek,mt7623-eth", "mediatek,mt2701-eth": for MT7623 SoC - "mediatek,mt7622-eth": for MT7622 SoC - "mediatek,mt7629-eth": for MT7629 SoC - "ralink,rt5350-eth": for Ralink Rt5350F and MT7628/88 SoC -- reg: Address and length of the register set for the device -- interrupts: Should contain the three frame engines interrupts in numeric - order. These are fe_int0, fe_int1 and fe_int2. -- clocks: the clock used by the core -- clock-names: the names of the clock listed in the clocks property. These are - "ethif", "esw", "gp2", "gp1" : For MT2701 and MT7623 SoC - "ethif", "esw", "gp0", "gp1", "gp2", "sgmii_tx250m", "sgmii_rx250m", - "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii_ck", "eth2pll" : For MT7622 SoC - "ethif", "sgmiitop", "esw", "gp0", "gp1", "gp2", "fe", "sgmii_tx250m", - "sgmii_rx250m", "sgmii_cdr_ref", "sgmii_cdr_fb", "sgmii2_tx250m", - "sgmii2_rx250m", "sgmii2_cdr_ref", "sgmii2_cdr_fb", "sgmii_ck", - "eth2pll" : For MT7629 SoC. -- power-domains: phandle to the power domain that the ethernet is part of -- resets: Should contain phandles to the ethsys reset signals -- reset-names: Should contain the names of reset signal listed in the resets - property - These are "fe", "gmac" and "ppe" -- mediatek,ethsys: phandle to the syscon node that handles the port setup -- mediatek,infracfg: phandle to the syscon node that handles the path from - GMAC to PHY variants, which is required for MT7629 SoC. -- mediatek,sgmiisys: a list of phandles to the syscon node that handles the - SGMII setup which is required for those SoCs equipped with SGMII such - as MT7622 and MT7629 SoC. And MT7622 have only one set of SGMII shared - by GMAC1 and GMAC2; MT7629 have two independent sets of SGMII directed - to GMAC1 and GMAC2, respectively. -- mediatek,pctl: phandle to the syscon node that handles the ports slew rate - and driver current: only for MT2701 and MT7623 SoC - -* Ethernet MAC node - -Required properties: -- compatible: Should be "mediatek,eth-mac" -- reg: The number of the MAC -- phy-handle: see ethernet.txt file in the same directory and - the phy-mode "trgmii" required being provided when reg - is equal to 0 and the MAC uses fixed-link to connect - with internal switch such as MT7530. - -Example: - -eth: ethernet@1b100000 { - compatible = "mediatek,mt7623-eth"; - reg = <0 0x1b100000 0 0x20000>; - clocks = <&topckgen CLK_TOP_ETHIF_SEL>, - <ðsys CLK_ETHSYS_ESW>, - <ðsys CLK_ETHSYS_GP2>, - <ðsys CLK_ETHSYS_GP1>; - clock-names = "ethif", "esw", "gp2", "gp1"; - interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW - GIC_SPI 199 IRQ_TYPE_LEVEL_LOW - GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>; - power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; - resets = <ðsys MT2701_ETHSYS_ETH_RST>; - reset-names = "eth"; - mediatek,ethsys = <ðsys>; - mediatek,pctl = <&syscfg_pctl_a>; - #address-cells = <1>; - #size-cells = <0>; - - gmac1: mac@0 { - compatible = "mediatek,eth-mac"; - reg = <0>; - phy-handle = <&phy0>; - }; - - gmac2: mac@1 { - compatible = "mediatek,eth-mac"; - reg = <1>; - phy-handle = <&phy1>; - }; - - mdio-bus { - phy0: ethernet-phy@0 { - reg = <0>; - phy-mode = "rgmii"; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - phy-mode = "rgmii"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/net/micrel.txt b/Documentation/devicetree/bindings/net/micrel.txt index 8d157f0295a5..a9ed691ffb03 100644 --- a/Documentation/devicetree/bindings/net/micrel.txt +++ b/Documentation/devicetree/bindings/net/micrel.txt @@ -45,3 +45,12 @@ Optional properties: In fiber mode, auto-negotiation is disabled and the PHY can only work in 100base-fx (full and half duplex) modes. + + - coma-mode-gpios: If present the given gpio will be deasserted when the + PHY is probed. + + Some PHYs have a COMA mode input pin which puts the PHY into + isolate and power-down mode. On some boards this input is connected + to a GPIO of the SoC. + + Supported on the LAN8814. diff --git a/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml new file mode 100644 index 000000000000..cf91fecd8909 --- /dev/null +++ b/Documentation/devicetree/bindings/net/microchip,lan95xx.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/microchip,lan95xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The device tree bindings for the USB Ethernet controllers + +maintainers: + - Oleksij Rempel <o.rempel@pengutronix.de> + +description: | + Device tree properties for hard wired SMSC95xx compatible USB Ethernet + controller. + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + items: + - enum: + - usb424,9500 # SMSC9500 USB Ethernet Device + - usb424,9505 # SMSC9505 USB Ethernet Device + - usb424,9530 # SMSC LAN9530 USB Ethernet Device + - usb424,9730 # SMSC LAN9730 USB Ethernet Device + - usb424,9900 # SMSC9500 USB Ethernet Device (SAL10) + - usb424,9901 # SMSC9505 USB Ethernet Device (SAL10) + - usb424,9902 # SMSC9500A USB Ethernet Device (SAL10) + - usb424,9903 # SMSC9505A USB Ethernet Device (SAL10) + - usb424,9904 # SMSC9512/9514 USB Hub & Ethernet Device (SAL10) + - usb424,9905 # SMSC9500A USB Ethernet Device (HAL) + - usb424,9906 # SMSC9505A USB Ethernet Device (HAL) + - usb424,9907 # SMSC9500 USB Ethernet Device (Alternate ID) + - usb424,9908 # SMSC9500A USB Ethernet Device (Alternate ID) + - usb424,9909 # SMSC9512/9514 USB Hub & Ethernet Devic. ID) + - usb424,9e00 # SMSC9500A USB Ethernet Device + - usb424,9e01 # SMSC9505A USB Ethernet Device + - usb424,9e08 # SMSC LAN89530 USB Ethernet Device + - usb424,ec00 # SMSC9512/9514 USB Hub & Ethernet Device + + reg: true + local-mac-address: true + mac-address: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + usb { + #address-cells = <1>; + #size-cells = <0>; + + ethernet@1 { + compatible = "usb424,9e00"; + reg = <1>; + local-mac-address = [00 00 00 00 00 00]; + }; + }; diff --git a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml index e79e4e166ad8..dc116f14750e 100644 --- a/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,lan966x-switch.yaml @@ -38,6 +38,8 @@ properties: - description: register based extraction - description: frame dma based extraction - description: analyzer interrupt + - description: ptp interrupt + - description: ptp external interrupt interrupt-names: minItems: 1 @@ -45,16 +47,16 @@ properties: - const: xtr - const: fdma - const: ana + - const: ptp + - const: ptp-ext resets: items: - description: Reset controller used for switch core reset (soft reset) - - description: Reset controller used for releasing the phy from reset reset-names: items: - const: switch - - const: phy ethernet-ports: type: object @@ -143,8 +145,8 @@ examples: reg-names = "cpu", "gcb"; interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "xtr"; - resets = <&switch_reset 0>, <&phy_reset 0>; - reset-names = "switch", "phy"; + resets = <&switch_reset 0>; + reset-names = "switch"; ethernet-ports { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml index 347b912a46bb..6c86d3d85e99 100644 --- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml @@ -53,12 +53,14 @@ properties: items: - description: register based extraction - description: frame dma based extraction + - description: ptp interrupt interrupt-names: minItems: 1 items: - const: xtr - const: fdma + - const: ptp resets: items: diff --git a/Documentation/devicetree/bindings/net/mscc,miim.yaml b/Documentation/devicetree/bindings/net/mscc,miim.yaml new file mode 100644 index 000000000000..2c451cfa4e0b --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc,miim.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc,miim.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microsemi MII Management Controller (MIIM) + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +allOf: + - $ref: "mdio.yaml#" + +properties: + compatible: + enum: + - mscc,ocelot-miim + - microchip,lan966x-miim + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + items: + - description: base address + - description: associated reset register for internal PHYs + minItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: true + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +unevaluatedProperties: false + +examples: + - | + mdio@107009c { + compatible = "mscc,ocelot-miim"; + reg = <0x107009c 0x36>, <0x10700f0 0x8>; + interrupts = <14>; + #address-cells = <1>; + #size-cells = <0>; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml new file mode 100644 index 000000000000..ee0a504bdb24 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc,vsc7514-switch.yaml @@ -0,0 +1,191 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/mscc,vsc7514-switch.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip VSC7514 Ethernet switch controller + +maintainers: + - Vladimir Oltean <vladimir.oltean@nxp.com> + - Claudiu Manoil <claudiu.manoil@nxp.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + Bindings for the Microchip VSC7514 switch driver + + The VSC7514 switch driver handles up to 11 ports and can inject/extract + packets using CPU. Additionally, PTP is supported as well as FDMA for faster + packet extraction/injection. + +properties: + $nodename: + pattern: "^switch@[0-9a-f]+$" + + compatible: + const: mscc,vsc7514-switch + + reg: + items: + - description: system target + - description: rewriter target + - description: qs target + - description: PTP target + - description: Port0 target + - description: Port1 target + - description: Port2 target + - description: Port3 target + - description: Port4 target + - description: Port5 target + - description: Port6 target + - description: Port7 target + - description: Port8 target + - description: Port9 target + - description: Port10 target + - description: QSystem target + - description: Analyzer target + - description: S0 target + - description: S1 target + - description: S2 target + - description: fdma target + + reg-names: + items: + - const: sys + - const: rew + - const: qs + - const: ptp + - const: port0 + - const: port1 + - const: port2 + - const: port3 + - const: port4 + - const: port5 + - const: port6 + - const: port7 + - const: port8 + - const: port9 + - const: port10 + - const: qsys + - const: ana + - const: s0 + - const: s1 + - const: s2 + - const: fdma + + interrupts: + minItems: 1 + items: + - description: PTP ready + - description: register based extraction + - description: frame dma based extraction + + interrupt-names: + minItems: 1 + items: + - const: ptp_rdy + - const: xtr + - const: fdma + + ethernet-ports: + type: object + + properties: + '#address-cells': + const: 1 + '#size-cells': + const: 0 + + additionalProperties: false + + patternProperties: + "^port@[0-9a-f]+$": + type: object + description: Ethernet ports handled by the switch + + $ref: ethernet-controller.yaml# + + unevaluatedProperties: false + + properties: + reg: + description: Switch port number + + phy-handle: true + + phy-mode: true + + fixed-link: true + + mac-address: true + + required: + - reg + - phy-mode + + oneOf: + - required: + - phy-handle + - required: + - fixed-link + +required: + - compatible + - reg + - reg-names + - interrupts + - interrupt-names + - ethernet-ports + +additionalProperties: false + +examples: + - | + switch@1010000 { + compatible = "mscc,vsc7514-switch"; + reg = <0x1010000 0x10000>, + <0x1030000 0x10000>, + <0x1080000 0x100>, + <0x10e0000 0x10000>, + <0x11e0000 0x100>, + <0x11f0000 0x100>, + <0x1200000 0x100>, + <0x1210000 0x100>, + <0x1220000 0x100>, + <0x1230000 0x100>, + <0x1240000 0x100>, + <0x1250000 0x100>, + <0x1260000 0x100>, + <0x1270000 0x100>, + <0x1280000 0x100>, + <0x1800000 0x80000>, + <0x1880000 0x10000>, + <0x1040000 0x10000>, + <0x1050000 0x10000>, + <0x1060000 0x10000>, + <0x1a0 0x1c4>; + reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", + "port2", "port3", "port4", "port5", "port6", + "port7", "port8", "port9", "port10", "qsys", + "ana", "s0", "s1", "s2", "fdma"; + interrupts = <18 21 16>; + interrupt-names = "ptp_rdy", "xtr", "fdma"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + phy-mode = "internal"; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + phy-mode = "internal"; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt deleted file mode 100644 index 7104679cf59d..000000000000 --- a/Documentation/devicetree/bindings/net/mscc-miim.txt +++ /dev/null @@ -1,26 +0,0 @@ -Microsemi MII Management Controller (MIIM) / MDIO -================================================= - -Properties: -- compatible: must be "mscc,ocelot-miim" -- reg: The base address of the MDIO bus controller register bank. Optionally, a - second register bank can be defined if there is an associated reset register - for internal PHYs -- #address-cells: Must be <1>. -- #size-cells: Must be <0>. MDIO addresses have no size component. -- interrupts: interrupt specifier (refer to the interrupt binding) - -Typically an MDIO bus might have several children. - -Example: - mdio@107009c { - #address-cells = <1>; - #size-cells = <0>; - compatible = "mscc,ocelot-miim"; - reg = <0x107009c 0x36>, <0x10700f0 0x8>; - interrupts = <14>; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt deleted file mode 100644 index 3b6290b45ce5..000000000000 --- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt +++ /dev/null @@ -1,83 +0,0 @@ -Microsemi Ocelot network Switch -=============================== - -The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513, -VSC7514) - -Required properties: -- compatible: Should be "mscc,vsc7514-switch" -- reg: Must contain an (offset, length) pair of the register set for each - entry in reg-names. -- reg-names: Must include the following entries: - - "sys" - - "rew" - - "qs" - - "ptp" (optional due to backward compatibility) - - "qsys" - - "ana" - - "portX" with X from 0 to the number of last port index available on that - switch -- interrupts: Should contain the switch interrupts for frame extraction, - frame injection and PTP ready. -- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain - "ptp_rdy" which is optional due to backward compatibility. -- ethernet-ports: A container for child nodes representing switch ports. - -The ethernet-ports container has the following properties - -Required properties: - -- #address-cells: Must be 1 -- #size-cells: Must be 0 - -Each port node must have the following mandatory properties: -- reg: Describes the port address in the switch - -Port nodes may also contain the following optional standardised -properties, described in binding documents: - -- phy-handle: Phandle to a PHY on an MDIO bus. See - Documentation/devicetree/bindings/net/ethernet.txt for details. - -Example: - - switch@1010000 { - compatible = "mscc,vsc7514-switch"; - reg = <0x1010000 0x10000>, - <0x1030000 0x10000>, - <0x1080000 0x100>, - <0x10e0000 0x10000>, - <0x11e0000 0x100>, - <0x11f0000 0x100>, - <0x1200000 0x100>, - <0x1210000 0x100>, - <0x1220000 0x100>, - <0x1230000 0x100>, - <0x1240000 0x100>, - <0x1250000 0x100>, - <0x1260000 0x100>, - <0x1270000 0x100>, - <0x1280000 0x100>, - <0x1800000 0x80000>, - <0x1880000 0x10000>; - reg-names = "sys", "rew", "qs", "ptp", "port0", "port1", - "port2", "port3", "port4", "port5", "port6", - "port7", "port8", "port9", "port10", "qsys", - "ana"; - interrupts = <18 21 22>; - interrupt-names = "ptp_rdy", "xtr", "inj"; - - ethernet-ports { - #address-cells = <1>; - #size-cells = <0>; - - port0: port@0 { - reg = <0>; - phy-handle = <&phy0>; - }; - port1: port@1 { - reg = <1>; - phy-handle = <&phy1>; - }; - }; - }; diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml index 15a45db3899a..1bcaf6ba822c 100644 --- a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Marvell International Ltd. NCI NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml index 7465aea2e1c0..e381a3c14836 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml @@ -8,7 +8,7 @@ title: NXP Semiconductors NCI NFC controller maintainers: - Charles Gorand <charles.gorand@effinnov.com> - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml index d8ba5a18db98..0509e0166345 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml +++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn532.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP Semiconductors PN532 NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml index d520414de463..18b3a7d819df 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml +++ b/Documentation/devicetree/bindings/net/nfc/nxp,pn544.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: NXP Semiconductors PN544 NFC Controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml index a6a1bc788d29..ef1155038a2f 100644 --- a/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/st,st-nci.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics ST NCI NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml index 4356eacde8aa..8a7274357b46 100644 --- a/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml +++ b/Documentation/devicetree/bindings/net/nfc/st,st21nfca.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics SAS ST21NFCA NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml index d3bca376039e..963d9531a856 100644 --- a/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml +++ b/Documentation/devicetree/bindings/net/nfc/st,st95hf.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: STMicroelectronics ST95HF NFC controller maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> properties: compatible: diff --git a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml index 40da2ac98978..404c8df99364 100644 --- a/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml +++ b/Documentation/devicetree/bindings/net/nfc/ti,trf7970a.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments TRF7970A RFID/NFC/15693 Transceiver maintainers: - - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Krzysztof Kozlowski <krzk@kernel.org> - Mark Greer <mgreer@animalcreek.com> properties: diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml index ee4afe361fac..011363166789 100644 --- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml @@ -54,6 +54,10 @@ properties: intf_mode: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to the GPR syscon + - description: the offset of the GPR register description: Should be phandle/offset pair. The phandle to the syscon node which encompases the GPR register, and the offset of the GPR register. diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.txt b/Documentation/devicetree/bindings/net/qcom,ethqos.txt index fcf5035810b5..1f5746849a71 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.txt +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.txt @@ -7,7 +7,9 @@ This device has following properties: Required properties: -- compatible: Should be qcom,qcs404-ethqos" +- compatible: Should be one of: + "qcom,qcs404-ethqos" + "qcom,sm8150-ethqos" - reg: Address and length of the register set for the device diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml index 58ecc62adfaa..dd4bb2e74880 100644 --- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml @@ -182,6 +182,12 @@ examples: smp2p-mpss { compatible = "qcom,smp2p"; + interrupts = <GIC_SPI 576 IRQ_TYPE_EDGE_RISING>; + mboxes = <&apss_shared 6>; + qcom,smem = <94>, <432>; + qcom,local-pid = <0>; + qcom,remote-pid = <5>; + ipa_smp2p_out: ipa-ap-to-modem { qcom,entry-name = "ipa"; #qcom,smem-state-cells = <1>; @@ -193,6 +199,7 @@ examples: #interrupt-cells = <2>; }; }; + ipa@1e40000 { compatible = "qcom,sdm845-ipa"; diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index bda821065a2b..acf347f3cdbe 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -45,8 +45,15 @@ properties: - items: - enum: + - renesas,etheravb-r9a09g011 # RZ/V2M + - const: renesas,etheravb-rzv2m # RZ/V2M compatible + + - items: + - enum: + - renesas,r9a07g043-gbeth # RZ/G2UL - renesas,r9a07g044-gbeth # RZ/G2{L,LC} - - const: renesas,rzg2l-gbeth # RZ/G2L + - renesas,r9a07g054-gbeth # RZ/V2L + - const: renesas,rzg2l-gbeth # RZ/{G2L,G2UL,V2L} family reg: true @@ -158,16 +165,33 @@ allOf: - const: arp_ns rx-internal-delay-ps: false else: - properties: - interrupts: - minItems: 25 - maxItems: 25 - interrupt-names: - items: - pattern: '^ch[0-9]+$' - required: - - interrupt-names - - rx-internal-delay-ps + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + interrupts: + minItems: 29 + maxItems: 29 + interrupt-names: + items: + pattern: '^(ch(1?)[0-9])|ch20|ch21|dia|dib|err_a|err_b|mgmt_a|mgmt_b|line3$' + rx-internal-delay-ps: false + required: + - interrupt-names + else: + properties: + interrupts: + minItems: 25 + maxItems: 25 + interrupt-names: + items: + pattern: '^ch[0-9]+$' + required: + - interrupt-names + - rx-internal-delay-ps - if: properties: @@ -229,17 +253,35 @@ allOf: - const: chi - const: refclk else: - properties: - clocks: - minItems: 1 - items: - - description: AVB functional clock - - description: Optional TXC reference clock - clock-names: - minItems: 1 - items: - - const: fck - - const: refclk + if: + properties: + compatible: + contains: + const: renesas,etheravb-rzv2m + then: + properties: + clocks: + items: + - description: Main clock + - description: Coherent Hub Interface clock + - description: gPTP reference clock + clock-names: + items: + - const: axi + - const: chi + - const: gptp + else: + properties: + clocks: + minItems: 1 + items: + - description: AVB functional clock + - description: Optional TXC reference clock + clock-names: + minItems: 1 + items: + - const: fck + - const: refclk additionalProperties: false diff --git a/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml new file mode 100644 index 000000000000..6df533162632 --- /dev/null +++ b/Documentation/devicetree/bindings/net/smsc,lan91c111.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/smsc,lan91c111.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller + +maintainers: + - Nicolas Pitre <nico@fluxnic.net> + +allOf: + - $ref: ethernet-controller.yaml# + +properties: + compatible: + const: smsc,lan91c111 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg-shift: true + + reg-io-width: + enum: [ 1, 2, 4 ] + default: 4 + + reset-gpios: + description: GPIO connected to control RESET pin + maxItems: 1 + + power-gpios: + description: GPIO connect to control PWRDWN pin + maxItems: 1 + + pxa-u16-align4: + description: put in place the workaround the force all u16 writes to be + 32 bits aligned + type: boolean + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + ethernet@4010000 { + compatible = "smsc,lan91c111"; + reg = <0x40100000 0x10000>; + phy-mode = "mii"; + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; + reg-io-width = <2>; + }; diff --git a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt deleted file mode 100644 index 309e37eb7c7c..000000000000 --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ /dev/null @@ -1,17 +0,0 @@ -SMSC LAN91c111 Ethernet mac - -Required properties: -- compatible = "smsc,lan91c111"; -- reg : physical address and size of registers -- interrupts : interrupt connection - -Optional properties: -- phy-device : see ethernet.txt file in the same directory -- reg-io-width : Mask of sizes (in bytes) of the IO accesses that - are supported on the device. Valid value for SMSC LAN91c111 are - 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning - 16-bit access only. -- power-gpios: GPIO to control the PWRDWN pin -- reset-gpios: GPIO to control the RESET pin -- pxa-u16-align4 : Boolean, put in place the workaround the force all - u16 writes to be 32 bits aligned diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 7eb43707e601..36c85eb3dc0d 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -53,20 +53,18 @@ properties: - allwinner,sun8i-r40-gmac - allwinner,sun8i-v3s-emac - allwinner,sun50i-a64-emac - - loongson,ls2k-dwmac - - loongson,ls7a-dwmac - amlogic,meson6-dwmac - amlogic,meson8b-dwmac - amlogic,meson8m2-dwmac - amlogic,meson-gxbb-dwmac - amlogic,meson-axg-dwmac - - loongson,ls2k-dwmac - - loongson,ls7a-dwmac - ingenic,jz4775-mac - ingenic,x1000-mac - ingenic,x1600-mac - ingenic,x1830-mac - ingenic,x2000-mac + - loongson,ls2k-dwmac + - loongson,ls7a-dwmac - rockchip,px30-gmac - rockchip,rk3128-gmac - rockchip,rk3228-gmac @@ -340,21 +338,21 @@ allOf: description: Programmable Burst Length (tx and rx) $ref: /schemas/types.yaml#/definitions/uint32 - enum: [2, 4, 8] + enum: [1, 2, 4, 8, 16, 32] snps,txpbl: description: Tx Programmable Burst Length. If set, DMA tx will use this value rather than snps,pbl. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [2, 4, 8] + enum: [1, 2, 4, 8, 16, 32] snps,rxpbl: description: Rx Programmable Burst Length. If set, DMA rx will use this value rather than snps,pbl. $ref: /schemas/types.yaml#/definitions/uint32 - enum: [2, 4, 8] + enum: [1, 2, 4, 8, 16, 32] snps,no-pbl-x8: $ref: /schemas/types.yaml#/definitions/flag diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml index aad5a9f3f962..b0ebcef6801c 100644 --- a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml +++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.yaml @@ -13,9 +13,6 @@ description: | This describes the devicetree bindings for AVE ethernet controller implemented on Socionext UniPhier SoCs. -allOf: - - $ref: ethernet-controller.yaml# - properties: compatible: enum: @@ -44,28 +41,20 @@ properties: minItems: 1 maxItems: 4 - clock-names: - oneOf: - - items: # for Pro4 - - const: gio - - const: ether - - const: ether-gb - - const: ether-phy - - const: ether # for others + clock-names: true resets: minItems: 1 maxItems: 2 - reset-names: - oneOf: - - items: # for Pro4 - - const: gio - - const: ether - - const: ether # for others + reset-names: true socionext,syscon-phy-mode: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to syscon that configures phy mode + - description: ID of MAC instance description: A phandle to syscon with one argument that configures phy mode. The argument is the ID of MAC instance. @@ -74,6 +63,42 @@ properties: $ref: mdio.yaml# unevaluatedProperties: false +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + const: socionext,uniphier-pro4-ave4 + then: + properties: + clocks: + minItems: 4 + maxItems: 4 + clock-names: + items: + - const: gio + - const: ether + - const: ether-gb + - const: ether-phy + resets: + minItems: 2 + maxItems: 2 + reset-names: + items: + - const: gio + - const: ether + else: + properties: + clocks: + maxItems: 1 + clock-names: + const: ether + resets: + maxItems: 1 + reset-names: + const: ether + required: - compatible - reg @@ -86,7 +111,7 @@ required: - reset-names - mdio -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml index 3d8a3b763ae6..5c93167b3b41 100644 --- a/Documentation/devicetree/bindings/net/stm32-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/stm32-dwmac.yaml @@ -74,6 +74,10 @@ properties: st,syscon: $ref: "/schemas/types.yaml#/definitions/phandle-array" + items: + - items: + - description: phandle to the syscon node which encompases the glue register + - description: offset of the control register description: Should be phandle/offset pair. The phandle to the syscon node which encompases the glue register, and the offset of the control register diff --git a/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml new file mode 100644 index 000000000000..62dffee27c3d --- /dev/null +++ b/Documentation/devicetree/bindings/net/sunplus,sp7021-emac.yaml @@ -0,0 +1,141 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) Sunplus Co., Ltd. 2021 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/sunplus,sp7021-emac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Sunplus SP7021 Dual Ethernet MAC Device Tree Bindings + +maintainers: + - Wells Lu <wellslutw@gmail.com> + +description: | + Sunplus SP7021 dual 10M/100M Ethernet MAC controller. + Device node of the controller has following properties. + +properties: + compatible: + const: sunplus,sp7021-emac + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + ethernet-ports: + type: object + description: Ethernet ports to PHY + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^port@[0-1]$": + type: object + description: Port to PHY + + properties: + reg: + minimum: 0 + maximum: 1 + + phy-handle: + maxItems: 1 + + phy-mode: + maxItems: 1 + + nvmem-cells: + items: + - description: nvmem cell address of MAC address + + nvmem-cell-names: + description: names corresponding to the nvmem cells + items: + - const: mac-address + + required: + - reg + - phy-handle + - phy-mode + - nvmem-cells + - nvmem-cell-names + + mdio: + $ref: mdio.yaml# + unevaluatedProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - resets + - pinctrl-0 + - pinctrl-names + - ethernet-ports + - mdio + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + ethernet@9c108000 { + compatible = "sunplus,sp7021-emac"; + reg = <0x9c108000 0x400>; + interrupt-parent = <&intc>; + interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clkc 0xa7>; + resets = <&rstc 0x97>; + pinctrl-0 = <&emac_demo_board_v3_pins>; + pinctrl-names = "default"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + phy-handle = <ð_phy0>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr0>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + reg = <1>; + phy-handle = <ð_phy1>; + phy-mode = "rmii"; + nvmem-cells = <&mac_addr1>; + nvmem-cell-names = "mac-address"; + }; + }; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + reg = <0>; + }; + + eth_phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml index 07a00f53adbf..31bf825c6598 100644 --- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml +++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml @@ -88,8 +88,7 @@ properties: type: object description: CPSW external ports - allOf: - - $ref: ethernet-controller.yaml# + $ref: ethernet-controller.yaml# properties: reg: diff --git a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml index dbfca5ee9139..a339202c5e8e 100644 --- a/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml +++ b/Documentation/devicetree/bindings/net/ti,davinci-mdio.yaml @@ -34,6 +34,7 @@ properties: maxItems: 1 bus_freq: + $ref: /schemas/types.yaml#/definitions/uint32 maximum: 2500000 description: MDIO Bus frequency @@ -56,6 +57,7 @@ if: compatible: contains: const: ti,davinci_mdio +then: required: - bus_freq diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml index 4b97a0f1175b..b8281d8be940 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpsw-nuss.yaml @@ -136,6 +136,11 @@ properties: ti,syscon-efuse: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: Phandle to the system control device node which + provides access to efuse + - description: offset to efuse registers??? description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses diff --git a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml index 1a81bf70c88c..b783ad0d1f53 100644 --- a/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml +++ b/Documentation/devicetree/bindings/net/ti,k3-am654-cpts.yaml @@ -103,12 +103,6 @@ properties: clocks: maxItems: 8 - assigned-clocks: - maxItems: 1 - - assigned-clocks-parents: - maxItems: 1 - required: - clocks @@ -148,4 +142,3 @@ examples: assigned-clock-parents = <&k3_clks 118 11>; }; }; - diff --git a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml index b12bfe61c67a..0988ed8d1c12 100644 --- a/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml @@ -52,6 +52,7 @@ unevaluatedProperties: false examples: - | + #include <dt-bindings/clock/toshiba,tmpv770x.h> #include <dt-bindings/interrupt-controller/arm-gic.h> soc { @@ -63,7 +64,7 @@ examples: reg = <0 0x28000000 0 0x10000>; interrupts = <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; - clocks = <&clk300mhz>, <&clk125mhz>; + clocks = <&pismu TMPV770X_CLK_PIETHER_BUS>, <&pismu TMPV770X_CLK_PIETHER_125M>; clock-names = "stmmaceth", "phy_ref_clk"; snps,txpbl = <4>; snps,rxpbl = <4>; diff --git a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml index 269cd63fb544..5a12dc32288a 100644 --- a/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml +++ b/Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml @@ -18,7 +18,7 @@ description: | wireless device. The node is expected to be specified as a child node of the PCI controller to which the wireless chip is connected. Alternatively, it can specify the wireless part of the MT7628/MT7688 - or MT7622 SoC. + or MT7622/MT7986 SoC. allOf: - $ref: ieee80211.yaml# @@ -29,9 +29,13 @@ properties: - mediatek,mt76 - mediatek,mt7628-wmac - mediatek,mt7622-wmac + - mediatek,mt7986-wmac reg: - maxItems: 1 + minItems: 1 + maxItems: 3 + description: + MT7986 should contain 3 regions consys, dcm, and sku, in this order. interrupts: maxItems: 1 @@ -39,6 +43,17 @@ properties: power-domains: maxItems: 1 + memory-region: + maxItems: 1 + + resets: + maxItems: 1 + description: + Specify the consys reset for mt7986. + + reset-names: + const: consys + mediatek,infracfg: $ref: /schemas/types.yaml#/definitions/phandle description: @@ -54,6 +69,10 @@ properties: mediatek,mtd-eeprom: $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to MTD partition + - description: offset containing EEPROM data description: Phandle to a MTD partition + offset containing EEPROM data @@ -69,6 +88,15 @@ properties: calibration data is generic and specific calibration data should be pulled from the OTP ROM + mediatek,disable-radar-background: + type: boolean + description: + Disable/enable radar/CAC detection running on a dedicated offchannel + chain available on some hw. + Background radar/CAC detection allows to avoid the CAC downtime + switching on a different channel during CAC detection on the selected + radar channel. + led: type: object $ref: /schemas/leds/common.yaml# @@ -165,7 +193,7 @@ required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | @@ -231,3 +259,15 @@ examples: power-domains = <&scpsys 3>; }; + + - | + wifi@18000000 { + compatible = "mediatek,mt7986-wmac"; + resets = <&watchdog 23>; + reset-names = "consys"; + reg = <0x18000000 0x1000000>, + <0x10003000 0x1000>, + <0x11d10000 0x1000>; + interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>; + memory-region = <&wmcpu_emi>; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml index cdf7b873b419..8c01fdba134b 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k.yaml @@ -20,120 +20,17 @@ properties: enum: - qcom,ipq8074-wifi - qcom,ipq6018-wifi + - qcom,wcn6750-wifi reg: maxItems: 1 interrupts: - items: - - description: misc-pulse1 interrupt events - - description: misc-latch interrupt events - - description: sw exception interrupt events - - description: watchdog interrupt events - - description: interrupt event for ring CE0 - - description: interrupt event for ring CE1 - - description: interrupt event for ring CE2 - - description: interrupt event for ring CE3 - - description: interrupt event for ring CE4 - - description: interrupt event for ring CE5 - - description: interrupt event for ring CE6 - - description: interrupt event for ring CE7 - - description: interrupt event for ring CE8 - - description: interrupt event for ring CE9 - - description: interrupt event for ring CE10 - - description: interrupt event for ring CE11 - - description: interrupt event for ring host2wbm-desc-feed - - description: interrupt event for ring host2reo-re-injection - - description: interrupt event for ring host2reo-command - - description: interrupt event for ring host2rxdma-monitor-ring3 - - description: interrupt event for ring host2rxdma-monitor-ring2 - - description: interrupt event for ring host2rxdma-monitor-ring1 - - description: interrupt event for ring reo2ost-exception - - description: interrupt event for ring wbm2host-rx-release - - description: interrupt event for ring reo2host-status - - description: interrupt event for ring reo2host-destination-ring4 - - description: interrupt event for ring reo2host-destination-ring3 - - description: interrupt event for ring reo2host-destination-ring2 - - description: interrupt event for ring reo2host-destination-ring1 - - description: interrupt event for ring rxdma2host-monitor-destination-mac3 - - description: interrupt event for ring rxdma2host-monitor-destination-mac2 - - description: interrupt event for ring rxdma2host-monitor-destination-mac1 - - description: interrupt event for ring ppdu-end-interrupts-mac3 - - description: interrupt event for ring ppdu-end-interrupts-mac2 - - description: interrupt event for ring ppdu-end-interrupts-mac1 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 - - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 - - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 - - description: interrupt event for ring rxdma2host-destination-ring-mac3 - - description: interrupt event for ring rxdma2host-destination-ring-mac2 - - description: interrupt event for ring rxdma2host-destination-ring-mac1 - - description: interrupt event for ring host2tcl-input-ring4 - - description: interrupt event for ring host2tcl-input-ring3 - - description: interrupt event for ring host2tcl-input-ring2 - - description: interrupt event for ring host2tcl-input-ring1 - - description: interrupt event for ring wbm2host-tx-completions-ring3 - - description: interrupt event for ring wbm2host-tx-completions-ring2 - - description: interrupt event for ring wbm2host-tx-completions-ring1 - - description: interrupt event for ring tcl2host-status-ring - + minItems: 32 + maxItems: 52 interrupt-names: - items: - - const: misc-pulse1 - - const: misc-latch - - const: sw-exception - - const: watchdog - - const: ce0 - - const: ce1 - - const: ce2 - - const: ce3 - - const: ce4 - - const: ce5 - - const: ce6 - - const: ce7 - - const: ce8 - - const: ce9 - - const: ce10 - - const: ce11 - - const: host2wbm-desc-feed - - const: host2reo-re-injection - - const: host2reo-command - - const: host2rxdma-monitor-ring3 - - const: host2rxdma-monitor-ring2 - - const: host2rxdma-monitor-ring1 - - const: reo2ost-exception - - const: wbm2host-rx-release - - const: reo2host-status - - const: reo2host-destination-ring4 - - const: reo2host-destination-ring3 - - const: reo2host-destination-ring2 - - const: reo2host-destination-ring1 - - const: rxdma2host-monitor-destination-mac3 - - const: rxdma2host-monitor-destination-mac2 - - const: rxdma2host-monitor-destination-mac1 - - const: ppdu-end-interrupts-mac3 - - const: ppdu-end-interrupts-mac2 - - const: ppdu-end-interrupts-mac1 - - const: rxdma2host-monitor-status-ring-mac3 - - const: rxdma2host-monitor-status-ring-mac2 - - const: rxdma2host-monitor-status-ring-mac1 - - const: host2rxdma-host-buf-ring-mac3 - - const: host2rxdma-host-buf-ring-mac2 - - const: host2rxdma-host-buf-ring-mac1 - - const: rxdma2host-destination-ring-mac3 - - const: rxdma2host-destination-ring-mac2 - - const: rxdma2host-destination-ring-mac1 - - const: host2tcl-input-ring4 - - const: host2tcl-input-ring3 - - const: host2tcl-input-ring2 - - const: host2tcl-input-ring1 - - const: wbm2host-tx-completions-ring3 - - const: wbm2host-tx-completions-ring2 - - const: wbm2host-tx-completions-ring1 - - const: tcl2host-status-ring + maxItems: 52 qcom,rproc: $ref: /schemas/types.yaml#/definitions/phandle @@ -151,20 +48,205 @@ properties: board-2.bin for designs with colliding bus and device specific ids memory-region: - maxItems: 1 + minItems: 1 + maxItems: 2 description: phandle to a node describing reserved memory (System RAM memory) used by ath11k firmware (see bindings/reserved-memory/reserved-memory.txt) + iommus: + minItems: 1 + maxItems: 2 + + wifi-firmware: + type: object + description: | + WCN6750 wifi node can contain one optional firmware subnode. + Firmware subnode is needed when the platform does not have Trustzone. + required: + - iommus + required: - compatible - reg - interrupts - - interrupt-names - qcom,rproc additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + properties: + interrupts: + items: + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: watchdog interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring3 + - description: interrupt event for ring host2rxdma-monitor-ring2 + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring ppdu-end-interrupts-mac3 + - description: interrupt event for ring ppdu-end-interrupts-mac2 + - description: interrupt event for ring ppdu-end-interrupts-mac1 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac3 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac2 + - description: interrupt event for ring rxdma2host-monitor-status-ring-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring rxdma2host-destination-ring-mac3 + - description: interrupt event for ring rxdma2host-destination-ring-mac2 + - description: interrupt event for ring rxdma2host-destination-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring tcl2host-status-ring + interrupt-names: + items: + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: watchdog + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring3 + - const: host2rxdma-monitor-ring2 + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: ppdu-end-interrupts-mac3 + - const: ppdu-end-interrupts-mac2 + - const: ppdu-end-interrupts-mac1 + - const: rxdma2host-monitor-status-ring-mac3 + - const: rxdma2host-monitor-status-ring-mac2 + - const: rxdma2host-monitor-status-ring-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: rxdma2host-destination-ring-mac3 + - const: rxdma2host-destination-ring-mac2 + - const: rxdma2host-destination-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: tcl2host-status-ring + + - if: + properties: + compatible: + contains: + enum: + - qcom,ipq8074-wifi + - qcom,ipq6018-wifi + then: + required: + - interrupt-names + + - if: + properties: + compatible: + contains: + enum: + - qcom,wcn6750-wifi + then: + properties: + interrupts: + items: + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring DP1 + - description: interrupt event for ring DP2 + - description: interrupt event for ring DP3 + - description: interrupt event for ring DP4 + - description: interrupt event for ring DP5 + - description: interrupt event for ring DP6 + - description: interrupt event for ring DP7 + - description: interrupt event for ring DP8 + - description: interrupt event for ring DP9 + - description: interrupt event for ring DP10 + - description: interrupt event for ring DP11 + - description: interrupt event for ring DP12 + - description: interrupt event for ring DP13 + - description: interrupt event for ring DP14 + - description: interrupt event for ring DP15 + - description: interrupt event for ring DP16 + - description: interrupt event for ring DP17 + - description: interrupt event for ring DP18 + - description: interrupt event for ring DP19 + - description: interrupt event for ring DP20 + - description: interrupt event for ring DP21 + - description: interrupt event for ring DP22 + examples: - | @@ -302,10 +384,71 @@ examples: pcie0 { #size-cells = <2>; #address-cells = <3>; - + wifi_0: wifi@0 { reg = <0 0 0 0 0>; memory-region = <&qcn9074_0>; }; }; }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + + wlan_ce_mem: memory@4cd000 { + no-map; + reg = <0x0 0x004cd000 0x0 0x1000>; + }; + + wlan_fw_mem: memory@80c00000 { + no-map; + reg = <0x0 0x80c00000 0x0 0xc00000>; + }; + }; + + wifi: wifi@17a10040 { + compatible = "qcom,wcn6750-wifi"; + reg = <0x17a10040 0x0>; + iommus = <&apps_smmu 0x1c00 0x1>; + interrupts = <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 769 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 770 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 773 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 774 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 775 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 776 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 777 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 778 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 779 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 780 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 781 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 782 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 783 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 784 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 785 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 786 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 787 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 788 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 789 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 790 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 791 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 792 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 793 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 794 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 795 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 796 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 797 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 798 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 799 IRQ_TYPE_EDGE_RISING>; + qcom,rproc = <&remoteproc_wpss>; + memory-region = <&wlan_fw_mem>, <&wlan_ce_mem>; + wifi-firmware { + iommus = <&apps_smmu 0x1c02 0x1>; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml new file mode 100644 index 000000000000..76199a67d628 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/silabs,wfx.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020, Silicon Laboratories, Inc. +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/net/wireless/silabs,wfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Silicon Labs WFxxx devicetree bindings + +maintainers: + - Jérôme Pouiller <jerome.pouiller@silabs.com> + +description: > + Support for the Wifi chip WFxxx from Silicon Labs. Currently, the only device + from the WFxxx series is the WF200 described here: + https://www.silabs.com/documents/public/data-sheets/wf200-datasheet.pdf + + The WF200 can be connected via SPI or via SDIO. + + For SDIO: + + Declaring the WFxxx chip in device tree is mandatory (usually, the VID/PID is + sufficient for the SDIO devices). + + It is recommended to declare a mmc-pwrseq on SDIO host above WFx. Without + it, you may encounter issues during reboot. The mmc-pwrseq should be + compatible with mmc-pwrseq-simple. Please consult + Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.yaml for more + information. + + For SPI: + + In add of the properties below, please consult + Documentation/devicetree/bindings/spi/spi-controller.yaml for optional SPI + related properties. + +properties: + compatible: + items: + - enum: + - prt,prtt1c-wfm200 # Protonic PRTT1C Board + - silabs,brd4001a # WGM160P Evaluation Board + - silabs,brd8022a # WF200 Evaluation Board + - silabs,brd8023a # WFM200 Evaluation Board + - const: silabs,wf200 # Chip alone without antenna + + reg: + description: + When used on SDIO bus, <reg> must be set to 1. When used on SPI bus, it is + the chip select address of the device as defined in the SPI devices + bindings. + maxItems: 1 + + spi-max-frequency: true + + interrupts: + description: The interrupt line. Should be IRQ_TYPE_EDGE_RISING. When SPI is + used, this property is required. When SDIO is used, the "in-band" + interrupt provided by the SDIO bus is used unless an interrupt is defined + in the Device Tree. + maxItems: 1 + + reset-gpios: + description: (SPI only) Phandle of gpio that will be used to reset chip + during probe. Without this property, you may encounter issues with warm + boot. + + For SDIO, the reset gpio should declared using a mmc-pwrseq. + maxItems: 1 + + wakeup-gpios: + description: Phandle of gpio that will be used to wake-up chip. Without this + property, driver will disable most of power saving features. + maxItems: 1 + + silabs,antenna-config-file: + $ref: /schemas/types.yaml#/definitions/string + description: Use an alternative file for antenna configuration (aka + "Platform Data Set" in Silabs jargon). Default depends of "compatible" + string. For "silabs,wf200", the default is 'wf200.pds'. + + local-mac-address: true + + mac-address: true + +additionalProperties: false + +required: + - compatible + - reg + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + wifi@0 { + compatible = "silabs,brd8022a", "silabs,wf200"; + pinctrl-names = "default"; + pinctrl-0 = <&wfx_irq &wfx_gpios>; + reg = <0>; + interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>; + wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + spi-max-frequency = <42000000>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + wfx_pwrseq: wfx_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wfx_reset>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + mmc { + mmc-pwrseq = <&wfx_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + + wifi@1 { + compatible = "silabs,brd8022a", "silabs,wf200"; + pinctrl-names = "default"; + pinctrl-0 = <&wfx_wakeup>; + reg = <1>; + wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + }; + }; +... diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml index 8dd164d10290..d68bb2ec1f7e 100644 --- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml +++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml @@ -54,9 +54,11 @@ properties: ref-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: Reference clock frequency. tcxo-clock-frequency: + $ref: /schemas/types.yaml#/definitions/uint32 description: TCXO clock frequency. clock-xtal: diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt index b8e4894bc634..1aa4c6006cd0 100644 --- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt +++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt @@ -26,7 +26,8 @@ Required properties: specified, the TX/RX DMA interrupts should be on that node instead, and only the Ethernet core interrupt is optionally specified here. -- phy-handle : Should point to the external phy device. +- phy-handle : Should point to the external phy device if exists. Pointing + this to the PCS/PMA PHY is deprecated and should be avoided. See ethernet.txt file in the same directory. - xlnx,rxmem : Set to allocated memory buffer for Rx/Tx in the hardware @@ -68,6 +69,11 @@ Optional properties: required through the core's MDIO interface (i.e. always, unless the PHY is accessed through a different bus). + - pcs-handle: Phandle to the internal PCS/PMA PHY in SGMII or 1000Base-X + modes, where "pcs-handle" should be used to point + to the PCS/PMA PHY, and "phy-handle" should point to an + external PHY if exists. + Example: axi_ethernet_eth: ethernet@40c00000 { compatible = "xlnx,axi-ethernet-1.00.a"; |