diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt')
-rw-r--r-- | Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt | 45 |
1 files changed, 0 insertions, 45 deletions
diff --git a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt b/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt deleted file mode 100644 index 691e58b6c223..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm-mtk-disp.txt +++ /dev/null @@ -1,45 +0,0 @@ -MediaTek display PWM controller - -Required properties: - - compatible: should be "mediatek,<name>-disp-pwm": - - "mediatek,mt2701-disp-pwm": found on mt2701 SoC. - - "mediatek,mt6595-disp-pwm": found on mt6595 SoC. - - "mediatek,mt8167-disp-pwm", "mediatek,mt8173-disp-pwm": found on mt8167 SoC. - - "mediatek,mt8173-disp-pwm": found on mt8173 SoC. - - "mediatek,mt8183-disp-pwm": found on mt8183 SoC.$ - - reg: physical base address and length of the controller's registers. - - #pwm-cells: must be 2. See pwm.yaml in this directory for a description of - the cell format. - - clocks: phandle and clock specifier of the PWM reference clock. - - clock-names: must contain the following: - - "main": clock used to generate PWM signals. - - "mm": sync signals from the modules of mmsys. - - pinctrl-names: Must contain a "default" entry. - - pinctrl-0: One property must exist for each entry in pinctrl-names. - See pinctrl/pinctrl-bindings.txt for details of the property values. - -Example: - pwm0: pwm@1401e000 { - compatible = "mediatek,mt8173-disp-pwm", - "mediatek,mt6595-disp-pwm"; - reg = <0 0x1401e000 0 0x1000>; - #pwm-cells = <2>; - clocks = <&mmsys CLK_MM_DISP_PWM026M>, - <&mmsys CLK_MM_DISP_PWM0MM>; - clock-names = "main", "mm"; - pinctrl-names = "default"; - pinctrl-0 = <&disp_pwm0_pins>; - }; - - backlight_lcd: backlight_lcd { - compatible = "pwm-backlight"; - pwms = <&pwm0 0 1000000>; - brightness-levels = < - 0 16 32 48 64 80 96 112 - 128 144 160 176 192 208 224 240 - 255 - >; - default-brightness-level = <9>; - power-supply = <&mt6397_vio18_reg>; - enable-gpios = <&pio 95 GPIO_ACTIVE_HIGH>; - }; |