diff options
Diffstat (limited to 'Documentation/devicetree/bindings/regulator')
| -rw-r--r-- | Documentation/devicetree/bindings/regulator/max8907.txt | 24 |
1 files changed, 8 insertions, 16 deletions
diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt index 51e683b2bf47..371eccd1cd68 100644 --- a/Documentation/devicetree/bindings/regulator/max8907.txt +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -12,15 +12,16 @@ Required properties: ... - in20-supply: The input supply for LDO20. - regulators: A node that houses a sub-node for each regulator within the - device. Each sub-node is identified using the regulator-compatible - property, with valid values listed below. The content of each sub-node - is defined by the standard binding for regulators; see regulator.txt. + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. Optional properties: - maxim,system-power-controller: Boolean property indicating that the PMIC controls the overall system power. -Valid regulator-compatible values are: +The valid names for regulators are: sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v, @@ -42,30 +43,21 @@ Example: ... regulators { - #address-cells = <1>; - #size-cells = <0>; - - mbatt_reg: regulator@0 { - reg = <0>; - regulator-compatible = "mbatt"; + mbatt_reg: mbatt { regulator-name = "vbat_pmu"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; regulator-always-on; }; - regulator@1 { - reg = <1>; - regulator-compatible = "sd1"; + sd1 { regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - regulator@2 { - reg = <2>; - regulator-compatible = "sd2"; + sd2 { regulator-name = "nvvdd_sv2,vdd_core"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; |