diff options
Diffstat (limited to 'Documentation/devicetree/bindings/soc/qcom')
6 files changed, 47 insertions, 80 deletions
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml index e2e173dfada7..a4eeb7e158e5 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml @@ -13,7 +13,7 @@ description: This binding describes the hardware component responsible for side channel requests to the always-on subsystem (AOSS), used for certain power management requests that is not handled by the standard RPMh interface. Each client in the - SoC has it's own block of message RAM and IRQ for communication with the AOSS. + SoC has its own block of message RAM and IRQ for communication with the AOSS. The protocol used to communicate in the message RAM is known as Qualcomm Messaging Protocol (QMP) @@ -33,6 +33,7 @@ properties: - qcom,sm8150-aoss-qmp - qcom,sm8250-aoss-qmp - qcom,sm8350-aoss-qmp + - qcom,sm8450-aoss-qmp - const: qcom,aoss-qmp reg: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml index f5ecf4a8c377..4a50f1d27724 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpmh-rsc.yaml @@ -65,33 +65,22 @@ properties: qcom,tcs-config: $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 4 + maxItems: 4 items: - - items: - - description: TCS type - enum: [ 0, 1, 2, 3 ] - - description: Number of TCS - - items: - - description: TCS type - enum: [ 0, 1, 2, 3 ] - - description: Number of TCS - - items: - - description: TCS type - enum: [ 0, 1, 2, 3] - - description: Numbe r of TCS - - items: - - description: TCS type - enum: [ 0, 1, 2, 3 ] - - description: Number of TCS + items: + - description: | + TCS type:: + - ACTIVE_TCS + - SLEEP_TCS + - WAKE_TCS + - CONTROL_TCS + enum: [ 0, 1, 2, 3 ] + - description: Number of TCS description: | The tuple defining the configuration of TCS. Must have two cells which describe each TCS type. The order of the TCS must match the hardware configuration. - Cell 1 (TCS Type):: TCS types to be specified:: - - ACTIVE_TCS - - SLEEP_TCS - - WAKE_TCS - - CONTROL_TCS - Cell 2 (Number of TCS):: <u32> qcom,tcs-offset: $ref: /schemas/types.yaml#/definitions/uint32 diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index f0f1bf06aea6..09d5bfa920f2 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -34,6 +34,7 @@ properties: - qcom,rpm-apq8084 - qcom,rpm-ipq6018 - qcom,rpm-msm8226 + - qcom,rpm-msm8909 - qcom,rpm-msm8916 - qcom,rpm-msm8936 - qcom,rpm-msm8953 @@ -51,6 +52,9 @@ properties: $ref: /schemas/clock/qcom,rpmcc.yaml# unevaluatedProperties: false + power-controller: + $ref: /schemas/power/qcom,rpmpd.yaml# + qcom,smd-channels: $ref: /schemas/types.yaml#/definitions/string-array description: Channel name used for the RPM communication @@ -88,12 +92,33 @@ examples: qcom,ipc = <&apcs 8 0>; qcom,smd-edge = <15>; - rpm-requests { - compatible = "qcom,rpm-msm8974"; - qcom,smd-channels = "rpm_requests"; + rpm-requests { + compatible = "qcom,rpm-msm8916"; + qcom,smd-channels = "rpm_requests"; + + clock-controller { + compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc"; + #clock-cells = <1>; + clocks = <&xo_board>; + clock-names = "xo"; + }; - /* Regulator nodes to follow */ + power-controller { + compatible = "qcom,msm8916-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1 { + opp-level = <1>; + }; + opp-2 { + opp-level = <2>; + }; + }; }; }; - }; -... + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml index bca07bb13ebf..9b3efe97f47c 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd.yaml @@ -21,51 +21,13 @@ properties: patternProperties: "^.*-edge|rpm$": - type: object + $ref: /schemas/remoteproc/qcom,smd-edge.yaml# description: Each subnode of the SMD node represents a remote subsystem or a remote processor of some sort - or in SMD language an "edge". The name of the edges are not important. properties: - interrupts: - maxItems: 1 - - label: - $ref: /schemas/types.yaml#/definitions/string - description: - Name of the edge, used for debugging and identification purposes. The - node name will be used if this is not present. - - mboxes: - maxItems: 1 - description: - Reference to the mailbox representing the outgoing doorbell in APCS for - this client. - - qcom,ipc: - $ref: /schemas/types.yaml#/definitions/phandle-array - items: - - items: - - description: phandle to a syscon node representing the APCS registers - - description: u32 representing offset to the register within the syscon - - description: u32 representing the ipc bit within the register - description: - Three entries specifying the outgoing ipc bit used for signaling the - remote processor. - - qcom,smd-edge: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The identifier of the remote processor in the smd channel allocation - table. - - qcom,remote-pid: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - The identifier for the remote processor as known by the rest of the - system. - rpm-requests: type: object description: @@ -89,17 +51,7 @@ patternProperties: additionalProperties: true - required: - - interrupts - - qcom,smd-edge - - oneOf: - - required: - - mboxes - - required: - - qcom,ipc - - additionalProperties: false + unevaluatedProperties: false required: - compatible diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml index 07d2d5398345..f433e6e0a19f 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,spm.yaml @@ -22,6 +22,7 @@ properties: - qcom,sdm660-silver-saw2-v4.1-l2 - qcom,msm8998-gold-saw2-v4.1-l2 - qcom,msm8998-silver-saw2-v4.1-l2 + - qcom,msm8909-saw2-v3.0-cpu - qcom,msm8916-saw2-v3.0-cpu - qcom,msm8226-saw2-v2.1-cpu - qcom,msm8974-saw2-v2.1-cpu diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml index d891ecfb2691..5320504bb5e0 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml @@ -77,7 +77,6 @@ properties: Should reference the tx-enable and tx-rings-empty SMEM states. qcom,smem-state-names: - $ref: /schemas/types.yaml#/definitions/string-array items: - const: tx-enable - const: tx-rings-empty |