8 files changed, 90 insertions, 5 deletions
diff --git a/Documentation/driver-api/clk.rst b/Documentation/driver-api/clk.rst
index 511628bb3d3a..593cca5058b1 100644
--- a/Documentation/driver-api/clk.rst
+++ b/Documentation/driver-api/clk.rst
@@ -96,7 +96,7 @@ the operations defined in clk-provider.h::
 		int		(*get_phase)(struct clk_hw *hw);
 		int		(*set_phase)(struct clk_hw *hw, int degrees);
 		void		(*init)(struct clk_hw *hw);
-		int		(*debug_init)(struct clk_hw *hw,
+		void		(*debug_init)(struct clk_hw *hw,
 					      struct dentry *dentry);
 	};
 
diff --git a/Documentation/driver-api/gpio/board.rst b/Documentation/driver-api/gpio/board.rst
index 25d62b2e9fd0..2c112553df84 100644
--- a/Documentation/driver-api/gpio/board.rst
+++ b/Documentation/driver-api/gpio/board.rst
@@ -177,3 +177,19 @@ mapping and is thus transparent to GPIO consumers.
 
 A set of functions such as gpiod_set_value() is available to work with
 the new descriptor-oriented interface.
+
+Boards using platform data can also hog GPIO lines by defining GPIO hog tables.
+
+.. code-block:: c
+
+        struct gpiod_hog gpio_hog_table[] = {
+                GPIO_HOG("gpio.0", 10, "foo", GPIO_ACTIVE_LOW, GPIOD_OUT_HIGH),
+                { }
+        };
+
+And the table can be added to the board code as follows::
+
+        gpiod_add_hogs(gpio_hog_table);
+
+The line will be hogged as soon as the gpiochip is created or - in case the
+chip was created earlier - when the hog table is registered.
diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst
index c71a50d85b50..aa03f389d41d 100644
--- a/Documentation/driver-api/gpio/consumer.rst
+++ b/Documentation/driver-api/gpio/consumer.rst
@@ -57,7 +57,7 @@ device that displays digits), an additional index argument can be specified::
 					  enum gpiod_flags flags)
 
 For a more detailed description of the con_id parameter in the DeviceTree case
-see Documentation/gpio/board.txt
+see Documentation/driver-api/gpio/board.rst
 
 The flags parameter is used to optionally specify a direction and initial value
 for the GPIO. Values can be:
diff --git a/Documentation/driver-api/gpio/drivers-on-gpio.rst b/Documentation/driver-api/gpio/drivers-on-gpio.rst
index 7da0c1dd1f7a..f3a189320e11 100644
--- a/Documentation/driver-api/gpio/drivers-on-gpio.rst
+++ b/Documentation/driver-api/gpio/drivers-on-gpio.rst
@@ -85,6 +85,10 @@ hardware descriptions such as device tree or ACPI:
   any other serio bus to the system and makes it possible to connect drivers
   for e.g. keyboards and other PS/2 protocol based devices.
 
+- cec-gpio: drivers/media/platform/cec-gpio/ is used to interact with a CEC
+  Consumer Electronics Control bus using only GPIO. It is used to communicate
+  with devices on the HDMI bus.
+
 Apart from this there are special GPIO drivers in subsystems like MMC/SD to
 read card detect and write protect GPIO lines, and in the TTY serial subsystem
 to emulate MCTRL (modem control) signals CTS/RTS by using two GPIO lines. The
diff --git a/Documentation/driver-api/index.rst b/Documentation/driver-api/index.rst
index f4180e7c7ed5..6d9f2f9fe20e 100644
--- a/Documentation/driver-api/index.rst
+++ b/Documentation/driver-api/index.rst
@@ -36,6 +36,7 @@ available subsections can be seen below.
    edac
    scsi
    libata
+   target
    mtdnand
    miscellaneous
    w1
diff --git a/Documentation/driver-api/infrastructure.rst b/Documentation/driver-api/infrastructure.rst
index bee1b9a1702f..6172f3cc3d0b 100644
--- a/Documentation/driver-api/infrastructure.rst
+++ b/Documentation/driver-api/infrastructure.rst
@@ -49,10 +49,10 @@ Device Drivers Base
 Device Drivers DMA Management
 -----------------------------
 
-.. kernel-doc:: drivers/base/dma-coherent.c
+.. kernel-doc:: kernel/dma/coherent.c
    :export:
 
-.. kernel-doc:: drivers/base/dma-mapping.c
+.. kernel-doc:: kernel/dma/mapping.c
    :export:
 
 Device drivers PnP support
diff --git a/Documentation/driver-api/scsi.rst b/Documentation/driver-api/scsi.rst
index 31ad0fed6763..64b231d125e0 100644
--- a/Documentation/driver-api/scsi.rst
+++ b/Documentation/driver-api/scsi.rst
@@ -334,5 +334,5 @@ todo
 ~~~~
 
 Parallel (fast/wide/ultra) SCSI, USB, SATA, SAS, Fibre Channel,
-FireWire, ATAPI devices, Infiniband, I2O, iSCSI, Parallel ports,
+FireWire, ATAPI devices, Infiniband, I2O, Parallel ports,
 netlink...
diff --git a/Documentation/driver-api/target.rst b/Documentation/driver-api/target.rst
new file mode 100644
index 000000000000..4363611dd86d
--- /dev/null
+++ b/Documentation/driver-api/target.rst
@@ -0,0 +1,64 @@
+=================================
+target and iSCSI Interfaces Guide
+=================================
+
+Introduction and Overview
+=========================
+
+TBD
+
+Target core device interfaces
+=============================
+
+.. kernel-doc:: drivers/target/target_core_device.c
+    :export:
+
+Target core transport interfaces
+================================
+
+.. kernel-doc:: drivers/target/target_core_transport.c
+    :export:
+
+Target-supported userspace I/O
+==============================
+
+.. kernel-doc:: drivers/target/target_core_user.c
+    :doc: Userspace I/O
+
+.. kernel-doc:: include/uapi/linux/target_core_user.h
+    :doc: Ring Design
+
+iSCSI helper functions
+======================
+
+.. kernel-doc:: drivers/scsi/libiscsi.c
+   :export:
+
+
+iSCSI boot information
+======================
+
+.. kernel-doc:: drivers/scsi/iscsi_boot_sysfs.c
+   :export:
+
+
+iSCSI transport class
+=====================
+
+The file drivers/scsi/scsi_transport_iscsi.c defines transport
+attributes for the iSCSI class, which sends SCSI packets over TCP/IP
+connections.
+
+.. kernel-doc:: drivers/scsi/scsi_transport_iscsi.c
+   :export:
+
+
+iSCSI TCP interfaces
+====================
+
+.. kernel-doc:: drivers/scsi/iscsi_tcp.c
+   :internal:
+
+.. kernel-doc:: drivers/scsi/libiscsi_tcp.c
+   :export:
+