diff options
Diffstat (limited to 'Documentation/hwmon/f71805f')
| -rw-r--r-- | Documentation/hwmon/f71805f | 36 |
1 files changed, 25 insertions, 11 deletions
diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f index 48a356084bc6..1efe5e5d337c 100644 --- a/Documentation/hwmon/f71805f +++ b/Documentation/hwmon/f71805f @@ -2,17 +2,29 @@ Kernel driver f71805f ===================== Supported chips: + * Fintek F71805F/FG + Prefix: 'f71805f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71806F/FG + Prefix: 'f71872f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website + * Fintek F71872F/FG + Prefix: 'f71872f' + Addresses scanned: none, address read from Super I/O config space + Datasheet: Available from the Fintek website Author: Jean Delvare <jdelvare@suse.de> @@ -64,24 +76,26 @@ you can only set the limits in steps of 32 mV (before scaling). The wirings and resistor values suggested by Fintek are as follow: - pin expected - name use R1 R2 divider raw val. - +======= ======= =========== ==== ======= ============ ============== +in pin expected + name use R1 R2 divider raw val. +======= ======= =========== ==== ======= ============ ============== in0 VCC VCC3.3V int. int. 2.00 1.65 V in1 VIN1 VTT1.2V 10K - 1.00 1.20 V -in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V (1) -in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V (2) +in2 VIN2 VRAM 100K 100K 2.00 ~1.25 V [1]_ +in3 VIN3 VCHIPSET 47K 100K 1.47 2.24 V [2]_ in4 VIN4 VCC5V 200K 47K 5.25 0.95 V in5 VIN5 +12V 200K 20K 11.00 1.05 V in6 VIN6 VCC1.5V 10K - 1.00 1.50 V -in7 VIN7 VCORE 10K - 1.00 ~1.40 V (1) +in7 VIN7 VCORE 10K - 1.00 ~1.40 V [1]_ in8 VIN8 VSB5V 200K 47K 1.00 0.95 V -in10 VSB VSB3.3V int. int. 2.00 1.65 V (3) -in9 VBAT VBATTERY int. int. 2.00 1.50 V (3) +in10 VSB VSB3.3V int. int. 2.00 1.65 V [3]_ +in9 VBAT VBATTERY int. int. 2.00 1.50 V [3]_ +======= ======= =========== ==== ======= ============ ============== -(1) Depends on your hardware setup. -(2) Obviously not correct, swapping R1 and R2 would make more sense. -(3) F71872F/FG only. +.. [1] Depends on your hardware setup. +.. [2] Obviously not correct, swapping R1 and R2 would make more sense. +.. [3] F71872F/FG only. These values can be used as hints at best, as motherboard manufacturers are free to use a completely different setup. As a matter of fact, the |