diff options
Diffstat (limited to 'Documentation/hwmon/ir35221')
| -rw-r--r-- | Documentation/hwmon/ir35221 | 87 |
1 files changed, 0 insertions, 87 deletions
diff --git a/Documentation/hwmon/ir35221 b/Documentation/hwmon/ir35221 deleted file mode 100644 index f7e112752c04..000000000000 --- a/Documentation/hwmon/ir35221 +++ /dev/null @@ -1,87 +0,0 @@ -Kernel driver ir35221 -===================== - -Supported chips: - * Infinion IR35221 - Prefix: 'ir35221' - Addresses scanned: - - Datasheet: Datasheet is not publicly available. - -Author: Samuel Mendoza-Jonas <sam@mendozajonas.com> - - -Description ------------ - -IR35221 is a Digital DC-DC Multiphase Converter - - -Usage Notes ------------ - -This driver does not probe for PMBus devices. You will have to instantiate -devices explicitly. - -Example: the following commands will load the driver for an IR35221 -at address 0x70 on I2C bus #4: - -# modprobe ir35221 -# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device - - -Sysfs attributes ----------------- - -curr1_label "iin" -curr1_input Measured input current -curr1_max Maximum current -curr1_max_alarm Current high alarm - -curr[2-3]_label "iout[1-2]" -curr[2-3]_input Measured output current -curr[2-3]_crit Critical maximum current -curr[2-3]_crit_alarm Current critical high alarm -curr[2-3]_highest Highest output current -curr[2-3]_lowest Lowest output current -curr[2-3]_max Maximum current -curr[2-3]_max_alarm Current high alarm - -in1_label "vin" -in1_input Measured input voltage -in1_crit Critical maximum input voltage -in1_crit_alarm Input voltage critical high alarm -in1_highest Highest input voltage -in1_lowest Lowest input voltage -in1_min Minimum input voltage -in1_min_alarm Input voltage low alarm - -in[2-3]_label "vout[1-2]" -in[2-3]_input Measured output voltage -in[2-3]_lcrit Critical minimum output voltage -in[2-3]_lcrit_alarm Output voltage critical low alarm -in[2-3]_crit Critical maximum output voltage -in[2-3]_crit_alarm Output voltage critical high alarm -in[2-3]_highest Highest output voltage -in[2-3]_lowest Lowest output voltage -in[2-3]_max Maximum output voltage -in[2-3]_max_alarm Output voltage high alarm -in[2-3]_min Minimum output voltage -in[2-3]_min_alarm Output voltage low alarm - -power1_label "pin" -power1_input Measured input power -power1_alarm Input power high alarm -power1_max Input power limit - -power[2-3]_label "pout[1-2]" -power[2-3]_input Measured output power -power[2-3]_max Output power limit -power[2-3]_max_alarm Output power high alarm - -temp[1-2]_input Measured temperature -temp[1-2]_crit Critical high temperature -temp[1-2]_crit_alarm Chip temperature critical high alarm -temp[1-2]_highest Highest temperature -temp[1-2]_lowest Lowest temperature -temp[1-2]_max Maximum temperature -temp[1-2]_max_alarm Chip temperature high alarm |