diff options
Diffstat (limited to 'Documentation/media/uapi/dvb')
151 files changed, 12785 insertions, 0 deletions
diff --git a/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst b/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst new file mode 100644 index 000000000000..dbe20ff38e83 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-bilingual-channel-select.rst @@ -0,0 +1,64 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_BILINGUAL_CHANNEL_SELECT: + +============================== +AUDIO_BILINGUAL_CHANNEL_SELECT +============================== + +Name +---- + +AUDIO_BILINGUAL_CHANNEL_SELECT + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this command. + + - .. row 3 + + - audio_channel_select_t ch + + - Select the output format of the audio (mono left/right, stereo). + + +Description +----------- + +This ioctl is obsolete. Do not use in new drivers. It has been replaced +by the V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK`` control +for MPEG decoders controlled through V4L2. + +This ioctl call asks the Audio Device to select the requested channel +for bilingual streams if possible. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-channel-select.rst b/Documentation/media/uapi/dvb/audio-channel-select.rst new file mode 100644 index 000000000000..69df4c0f2fb2 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-channel-select.rst @@ -0,0 +1,63 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_CHANNEL_SELECT: + +==================== +AUDIO_CHANNEL_SELECT +==================== + +Name +---- + +AUDIO_CHANNEL_SELECT + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_CHANNEL_SELECT, audio_channel_select_t) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_CHANNEL_SELECT for this command. + + - .. row 3 + + - audio_channel_select_t ch + + - Select the output format of the audio (mono left/right, stereo). + + +Description +----------- + +This ioctl is for DVB devices only. To control a V4L2 decoder use the +V4L2 ``V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK`` control instead. + +This ioctl call asks the Audio Device to select the requested channel if +possible. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-clear-buffer.rst b/Documentation/media/uapi/dvb/audio-clear-buffer.rst new file mode 100644 index 000000000000..a3dec29bdc69 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-clear-buffer.rst @@ -0,0 +1,54 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_CLEAR_BUFFER: + +================== +AUDIO_CLEAR_BUFFER +================== + +Name +---- + +AUDIO_CLEAR_BUFFER + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_CLEAR_BUFFER) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_CLEAR_BUFFER for this command. + + +Description +----------- + +This ioctl call asks the Audio Device to clear all software and hardware +buffers of the audio decoder device. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-continue.rst b/Documentation/media/uapi/dvb/audio-continue.rst new file mode 100644 index 000000000000..053627dd61e7 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-continue.rst @@ -0,0 +1,54 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_CONTINUE: + +============== +AUDIO_CONTINUE +============== + +Name +---- + +AUDIO_CONTINUE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_CONTINUE) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_CONTINUE for this command. + + +Description +----------- + +This ioctl restarts the decoding and playing process previously paused +with AUDIO_PAUSE command. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-fclose.rst b/Documentation/media/uapi/dvb/audio-fclose.rst new file mode 100644 index 000000000000..e5d4225cd9d7 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-fclose.rst @@ -0,0 +1,54 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _audio_fclose: + +================= +DVB audio close() +================= + +Name +---- + +DVB audio close() + + +Synopsis +-------- + +.. cpp:function:: int close(int fd) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + +Description +----------- + +This system call closes a previously opened audio device. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EBADF`` + + - fd is not a valid open file descriptor. diff --git a/Documentation/media/uapi/dvb/audio-fopen.rst b/Documentation/media/uapi/dvb/audio-fopen.rst new file mode 100644 index 000000000000..ec3b23aa79b3 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-fopen.rst @@ -0,0 +1,104 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _audio_fopen: + +================ +DVB audio open() +================ + +Name +---- + +DVB audio open() + + +Synopsis +-------- + +.. cpp:function:: int open(const char *deviceName, int flags) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - const char \*deviceName + + - Name of specific audio device. + + - .. row 2 + + - int flags + + - A bit-wise OR of the following flags: + + - .. row 3 + + - + - O_RDONLY read-only access + + - .. row 4 + + - + - O_RDWR read/write access + + - .. row 5 + + - + - O_NONBLOCK open in non-blocking mode + + - .. row 6 + + - + - (blocking mode is the default) + + +Description +----------- + +This system call opens a named audio device (e.g. +/dev/dvb/adapter0/audio0) for subsequent use. When an open() call has +succeeded, the device will be ready for use. The significance of +blocking or non-blocking mode is described in the documentation for +functions where there is a difference. It does not affect the semantics +of the open() call itself. A device opened in blocking mode can later be +put into non-blocking mode (and vice versa) using the F_SETFL command +of the fcntl system call. This is a standard system call, documented in +the Linux manual page for fcntl. Only one user can open the Audio Device +in O_RDWR mode. All other attempts to open the device in this mode will +fail, and an error code will be returned. If the Audio Device is opened +in O_RDONLY mode, the only ioctl call that can be used is +AUDIO_GET_STATUS. All other call will return with an error code. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``ENODEV`` + + - Device driver not loaded/available. + + - .. row 2 + + - ``EBUSY`` + + - Device or resource busy. + + - .. row 3 + + - ``EINVAL`` + + - Invalid argument. diff --git a/Documentation/media/uapi/dvb/audio-fwrite.rst b/Documentation/media/uapi/dvb/audio-fwrite.rst new file mode 100644 index 000000000000..ca95b9be0c2a --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-fwrite.rst @@ -0,0 +1,82 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _audio_fwrite: + +================= +DVB audio write() +================= + +Name +---- + +DVB audio write() + + +Synopsis +-------- + +.. cpp:function:: size_t write(int fd, const void *buf, size_t count) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - void \*buf + + - Pointer to the buffer containing the PES data. + + - .. row 3 + + - size_t count + + - Size of buf. + + +Description +----------- + +This system call can only be used if AUDIO_SOURCE_MEMORY is selected +in the ioctl call AUDIO_SELECT_SOURCE. The data provided shall be in +PES format. If O_NONBLOCK is not specified the function will block +until buffer space is available. The amount of data to be transferred is +implied by count. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EPERM`` + + - Mode AUDIO_SOURCE_MEMORY not selected. + + - .. row 2 + + - ``ENOMEM`` + + - Attempted to write more data than the internal buffer can hold. + + - .. row 3 + + - ``EBADF`` + + - fd is not a valid open file descriptor. diff --git a/Documentation/media/uapi/dvb/audio-get-capabilities.rst b/Documentation/media/uapi/dvb/audio-get-capabilities.rst new file mode 100644 index 000000000000..e274a8d53785 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-get-capabilities.rst @@ -0,0 +1,60 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_GET_CAPABILITIES: + +====================== +AUDIO_GET_CAPABILITIES +====================== + +Name +---- + +AUDIO_GET_CAPABILITIES + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_GET_CAPABILITIES, unsigned int *cap) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_GET_CAPABILITIES for this command. + + - .. row 3 + + - unsigned int \*cap + + - Returns a bit array of supported sound formats. + + +Description +----------- + +This ioctl call asks the Audio Device to tell us about the decoding +capabilities of the audio hardware. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-get-pts.rst b/Documentation/media/uapi/dvb/audio-get-pts.rst new file mode 100644 index 000000000000..5f875508b833 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-get-pts.rst @@ -0,0 +1,69 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_GET_PTS: + +============= +AUDIO_GET_PTS +============= + +Name +---- + +AUDIO_GET_PTS + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_GET_PTS, __u64 *pts) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_GET_PTS for this command. + + - .. row 3 + + - __u64 \*pts + + - Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / + ISO/IEC 13818-1. + + The PTS should belong to the currently played frame if possible, + but may also be a value close to it like the PTS of the last + decoded frame or the last PTS extracted by the PES parser. + + +Description +----------- + +This ioctl is obsolete. Do not use in new drivers. If you need this +functionality, then please contact the linux-media mailing list +(`https://linuxtv.org/lists.php <https://linuxtv.org/lists.php>`__). + +This ioctl call asks the Audio Device to return the current PTS +timestamp. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-get-status.rst b/Documentation/media/uapi/dvb/audio-get-status.rst new file mode 100644 index 000000000000..cbd822773d85 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-get-status.rst @@ -0,0 +1,60 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_GET_STATUS: + +================ +AUDIO_GET_STATUS +================ + +Name +---- + +AUDIO_GET_STATUS + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_GET_STATUS, struct audio_status *status) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_GET_STATUS for this command. + + - .. row 3 + + - struct audio_status \*status + + - Returns the current state of Audio Device. + + +Description +----------- + +This ioctl call asks the Audio Device to return the current state of the +Audio Device. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-pause.rst b/Documentation/media/uapi/dvb/audio-pause.rst new file mode 100644 index 000000000000..9ca263e90c6c --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-pause.rst @@ -0,0 +1,55 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_PAUSE: + +=========== +AUDIO_PAUSE +=========== + +Name +---- + +AUDIO_PAUSE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_PAUSE) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_PAUSE for this command. + + +Description +----------- + +This ioctl call suspends the audio stream being played. Decoding and +playing are paused. It is then possible to restart again decoding and +playing process of the audio stream using AUDIO_CONTINUE command. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-play.rst b/Documentation/media/uapi/dvb/audio-play.rst new file mode 100644 index 000000000000..db4d7203acc5 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-play.rst @@ -0,0 +1,54 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_PLAY: + +========== +AUDIO_PLAY +========== + +Name +---- + +AUDIO_PLAY + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_PLAY) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_PLAY for this command. + + +Description +----------- + +This ioctl call asks the Audio Device to start playing an audio stream +from the selected source. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-select-source.rst b/Documentation/media/uapi/dvb/audio-select-source.rst new file mode 100644 index 000000000000..b806d806a46f --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-select-source.rst @@ -0,0 +1,62 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SELECT_SOURCE: + +=================== +AUDIO_SELECT_SOURCE +=================== + +Name +---- + +AUDIO_SELECT_SOURCE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_SELECT_SOURCE, audio_stream_source_t source) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_SELECT_SOURCE for this command. + + - .. row 3 + + - audio_stream_source_t source + + - Indicates the source that shall be used for the Audio stream. + + +Description +----------- + +This ioctl call informs the audio device which source shall be used for +the input data. The possible sources are demux or memory. If +AUDIO_SOURCE_MEMORY is selected, the data is fed to the Audio Device +through the write command. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-set-attributes.rst b/Documentation/media/uapi/dvb/audio-set-attributes.rst new file mode 100644 index 000000000000..18667cea2cdf --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-set-attributes.rst @@ -0,0 +1,71 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SET_ATTRIBUTES: + +==================== +AUDIO_SET_ATTRIBUTES +==================== + +Name +---- + +AUDIO_SET_ATTRIBUTES + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = AUDIO_SET_ATTRIBUTES, audio_attributes_t attr ) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_SET_ATTRIBUTES for this command. + + - .. row 3 + + - audio_attributes_t attr + + - audio attributes according to section ?? + + +Description +----------- + +This ioctl is intended for DVD playback and allows you to set certain +information about the audio stream. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - attr is not a valid or supported attribute setting. diff --git a/Documentation/media/uapi/dvb/audio-set-av-sync.rst b/Documentation/media/uapi/dvb/audio-set-av-sync.rst new file mode 100644 index 000000000000..6f7e26fa4cd1 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-set-av-sync.rst @@ -0,0 +1,70 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SET_AV_SYNC: + +================= +AUDIO_SET_AV_SYNC +================= + +Name +---- + +AUDIO_SET_AV_SYNC + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_SET_AV_SYNC, boolean state) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_AV_SYNC for this command. + + - .. row 3 + + - boolean state + + - Tells the DVB subsystem if A/V synchronization shall be ON or OFF. + + - .. row 4 + + - + - TRUE AV-sync ON + + - .. row 5 + + - + - FALSE AV-sync OFF + + +Description +----------- + +This ioctl call asks the Audio Device to turn ON or OFF A/V +synchronization. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst b/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst new file mode 100644 index 000000000000..30bcaca14c3f --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-set-bypass-mode.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SET_BYPASS_MODE: + +===================== +AUDIO_SET_BYPASS_MODE +===================== + +Name +---- + +AUDIO_SET_BYPASS_MODE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_SET_BYPASS_MODE, boolean mode) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_SET_BYPASS_MODE for this command. + + - .. row 3 + + - boolean mode + + - Enables or disables the decoding of the current Audio stream in + the DVB subsystem. + + - .. row 4 + + - + - TRUE Bypass is disabled + + - .. row 5 + + - + - FALSE Bypass is enabled + + +Description +----------- + +This ioctl call asks the Audio Device to bypass the Audio decoder and +forward the stream without decoding. This mode shall be used if streams +that can’t be handled by the DVB system shall be decoded. Dolby +DigitalTM streams are automatically forwarded by the DVB subsystem if +the hardware can handle it. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-set-ext-id.rst b/Documentation/media/uapi/dvb/audio-set-ext-id.rst new file mode 100644 index 000000000000..049414db8ef6 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-set-ext-id.rst @@ -0,0 +1,71 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SET_EXT_ID: + +================ +AUDIO_SET_EXT_ID +================ + +Name +---- + +AUDIO_SET_EXT_ID + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = AUDIO_SET_EXT_ID, int id) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_SET_EXT_ID for this command. + + - .. row 3 + + - int id + + - audio sub_stream_id + + +Description +----------- + +This ioctl can be used to set the extension id for MPEG streams in DVD +playback. Only the first 3 bits are recognized. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - id is not a valid id. diff --git a/Documentation/media/uapi/dvb/audio-set-id.rst b/Documentation/media/uapi/dvb/audio-set-id.rst new file mode 100644 index 000000000000..a664dc1955cb --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-set-id.rst @@ -0,0 +1,65 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SET_ID: + +============ +AUDIO_SET_ID +============ + +Name +---- + +AUDIO_SET_ID + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_SET_ID, int id) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_SET_ID for this command. + + - .. row 3 + + - int id + + - audio sub-stream id + + +Description +----------- + +This ioctl selects which sub-stream is to be decoded if a program or +system stream is sent to the video device. If no audio stream type is +set the id has to be in [0xC0,0xDF] for MPEG sound, in [0x80,0x87] for +AC3 and in [0xA0,0xA7] for LPCM. More specifications may follow for +other stream types. If the stream type is set the id just specifies the +substream id of the audio stream and only the first 5 bits are +recognized. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-set-karaoke.rst b/Documentation/media/uapi/dvb/audio-set-karaoke.rst new file mode 100644 index 000000000000..b55f8380b9cd --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-set-karaoke.rst @@ -0,0 +1,70 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SET_KARAOKE: + +================= +AUDIO_SET_KARAOKE +================= + +Name +---- + +AUDIO_SET_KARAOKE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = AUDIO_SET_KARAOKE, audio_karaoke_t *karaoke) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_SET_KARAOKE for this command. + + - .. row 3 + + - audio_karaoke_t \*karaoke + + - karaoke settings according to section ??. + + +Description +----------- + +This ioctl allows one to set the mixer settings for a karaoke DVD. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - karaoke is not a valid or supported karaoke setting. diff --git a/Documentation/media/uapi/dvb/audio-set-mixer.rst b/Documentation/media/uapi/dvb/audio-set-mixer.rst new file mode 100644 index 000000000000..67821729c2b6 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-set-mixer.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SET_MIXER: + +=============== +AUDIO_SET_MIXER +=============== + +Name +---- + +AUDIO_SET_MIXER + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_SET_MIXER, audio_mixer_t *mix) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_SET_ID for this command. + + - .. row 3 + + - audio_mixer_t \*mix + + - mixer settings. + + +Description +----------- + +This ioctl lets you adjust the mixer settings of the audio decoder. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-set-mute.rst b/Documentation/media/uapi/dvb/audio-set-mute.rst new file mode 100644 index 000000000000..ebaba95ee278 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-set-mute.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SET_MUTE: + +============== +AUDIO_SET_MUTE +============== + +Name +---- + +AUDIO_SET_MUTE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_SET_MUTE, boolean state) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_SET_MUTE for this command. + + - .. row 3 + + - boolean state + + - Indicates if audio device shall mute or not. + + - .. row 4 + + - + - TRUE Audio Mute + + - .. row 5 + + - + - FALSE Audio Un-mute + + +Description +----------- + +This ioctl is for DVB devices only. To control a V4L2 decoder use the +V4L2 :ref:`VIDIOC_DECODER_CMD` with the +``V4L2_DEC_CMD_START_MUTE_AUDIO`` flag instead. + +This ioctl call asks the audio device to mute the stream that is +currently being played. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio-set-streamtype.rst b/Documentation/media/uapi/dvb/audio-set-streamtype.rst new file mode 100644 index 000000000000..dfb9a6c00d88 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-set-streamtype.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_SET_STREAMTYPE: + +==================== +AUDIO_SET_STREAMTYPE +==================== + +Name +---- + +AUDIO_SET_STREAMTYPE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = AUDIO_SET_STREAMTYPE, int type) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_SET_STREAMTYPE for this command. + + - .. row 3 + + - int type + + - stream type + + +Description +----------- + +This ioctl tells the driver which kind of audio stream to expect. This +is useful if the stream offers several audio sub-streams like LPCM and +AC3. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - type is not a valid or supported stream type. diff --git a/Documentation/media/uapi/dvb/audio-stop.rst b/Documentation/media/uapi/dvb/audio-stop.rst new file mode 100644 index 000000000000..449127e3f2aa --- /dev/null +++ b/Documentation/media/uapi/dvb/audio-stop.rst @@ -0,0 +1,54 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _AUDIO_STOP: + +========== +AUDIO_STOP +========== + +Name +---- + +AUDIO_STOP + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = AUDIO_STOP) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals AUDIO_STOP for this command. + + +Description +----------- + +This ioctl call asks the Audio Device to stop playing the current +stream. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/audio.rst b/Documentation/media/uapi/dvb/audio.rst new file mode 100644 index 000000000000..155622185ea4 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio.rst @@ -0,0 +1,26 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb_audio: + +################ +DVB Audio Device +################ +The DVB audio device controls the MPEG2 audio decoder of the DVB +hardware. It can be accessed through ``/dev/dvb/adapter?/audio?``. Data +types and and ioctl definitions can be accessed by including +``linux/dvb/audio.h`` in your application. + +Please note that some DVB cards don’t have their own MPEG decoder, which +results in the omission of the audio and video device. + +These ioctls were also used by V4L2 to control MPEG decoders implemented +in V4L2. The use of these ioctls for that purpose has been made obsolete +and proper V4L2 ioctls or controls have been created to replace that +functionality. + + +.. toctree:: + :maxdepth: 1 + + audio_data_types + audio_function_calls diff --git a/Documentation/media/uapi/dvb/audio_data_types.rst b/Documentation/media/uapi/dvb/audio_data_types.rst new file mode 100644 index 000000000000..4a53127eb13a --- /dev/null +++ b/Documentation/media/uapi/dvb/audio_data_types.rst @@ -0,0 +1,176 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _audio_data_types: + +**************** +Audio Data Types +**************** + +This section describes the structures, data types and defines used when +talking to the audio device. + + +.. _audio-stream-source-t: + +audio_stream_source_t +===================== + +The audio stream source is set through the AUDIO_SELECT_SOURCE call +and can take the following values, depending on whether we are replaying +from an internal (demux) or external (user write) source. + + +.. code-block:: c + + typedef enum { + AUDIO_SOURCE_DEMUX, + AUDIO_SOURCE_MEMORY + } audio_stream_source_t; + +AUDIO_SOURCE_DEMUX selects the demultiplexer (fed either by the +frontend or the DVR device) as the source of the video stream. If +AUDIO_SOURCE_MEMORY is selected the stream comes from the application +through the ``write()`` system call. + + +.. _audio-play-state-t: + +audio_play_state_t +================== + +The following values can be returned by the AUDIO_GET_STATUS call +representing the state of audio playback. + + +.. code-block:: c + + typedef enum { + AUDIO_STOPPED, + AUDIO_PLAYING, + AUDIO_PAUSED + } audio_play_state_t; + + +.. _audio-channel-select-t: + +audio_channel_select_t +====================== + +The audio channel selected via AUDIO_CHANNEL_SELECT is determined by +the following values. + + +.. code-block:: c + + typedef enum { + AUDIO_STEREO, + AUDIO_MONO_LEFT, + AUDIO_MONO_RIGHT, + AUDIO_MONO, + AUDIO_STEREO_SWAPPED + } audio_channel_select_t; + + +.. _audio-status: + +struct audio_status +=================== + +The AUDIO_GET_STATUS call returns the following structure informing +about various states of the playback operation. + + +.. code-block:: c + + typedef struct audio_status { + boolean AV_sync_state; + boolean mute_state; + audio_play_state_t play_state; + audio_stream_source_t stream_source; + audio_channel_select_t channel_select; + boolean bypass_mode; + audio_mixer_t mixer_state; + } audio_status_t; + + +.. _audio-mixer: + +struct audio_mixer +================== + +The following structure is used by the AUDIO_SET_MIXER call to set the +audio volume. + + +.. code-block:: c + + typedef struct audio_mixer { + unsigned int volume_left; + unsigned int volume_right; + } audio_mixer_t; + + +.. _audio_encodings: + +audio encodings +=============== + +A call to AUDIO_GET_CAPABILITIES returns an unsigned integer with the +following bits set according to the hardwares capabilities. + + +.. code-block:: c + + #define AUDIO_CAP_DTS 1 + #define AUDIO_CAP_LPCM 2 + #define AUDIO_CAP_MP1 4 + #define AUDIO_CAP_MP2 8 + #define AUDIO_CAP_MP3 16 + #define AUDIO_CAP_AAC 32 + #define AUDIO_CAP_OGG 64 + #define AUDIO_CAP_SDDS 128 + #define AUDIO_CAP_AC3 256 + + +.. _audio-karaoke: + +struct audio_karaoke +==================== + +The ioctl AUDIO_SET_KARAOKE uses the following format: + + +.. code-block:: c + + typedef + struct audio_karaoke { + int vocal1; + int vocal2; + int melody; + } audio_karaoke_t; + +If Vocal1 or Vocal2 are non-zero, they get mixed into left and right t +at 70% each. If both, Vocal1 and Vocal2 are non-zero, Vocal1 gets mixed +into the left channel and Vocal2 into the right channel at 100% each. Ff +Melody is non-zero, the melody channel gets mixed into left and right. + + +.. _audio-attributes-t: + +audio attributes +================ + +The following attributes can be set by a call to AUDIO_SET_ATTRIBUTES: + + +.. code-block:: c + + typedef uint16_t audio_attributes_t; + /* bits: descr. */ + /* 15-13 audio coding mode (0=ac3, 2=mpeg1, 3=mpeg2ext, 4=LPCM, 6=DTS, */ + /* 12 multichannel extension */ + /* 11-10 audio type (0=not spec, 1=language included) */ + /* 9- 8 audio application mode (0=not spec, 1=karaoke, 2=surround) */ + /* 7- 6 Quantization / DRC (mpeg audio: 1=DRC exists)(lpcm: 0=16bit, */ + /* 5- 4 Sample frequency fs (0=48kHz, 1=96kHz) */ + /* 2- 0 number of audio channels (n+1 channels) */ diff --git a/Documentation/media/uapi/dvb/audio_function_calls.rst b/Documentation/media/uapi/dvb/audio_function_calls.rst new file mode 100644 index 000000000000..0bb56f0cfed4 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio_function_calls.rst @@ -0,0 +1,34 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _audio_function_calls: + +******************** +Audio Function Calls +******************** + +.. toctree:: + :maxdepth: 1 + + audio-fopen + audio-fclose + audio-fwrite + audio-stop + audio-play + audio-pause + audio-continue + audio-select-source + audio-set-mute + audio-set-av-sync + audio-set-bypass-mode + audio-channel-select + audio-bilingual-channel-select + audio-get-pts + audio-get-status + audio-get-capabilities + audio-clear-buffer + audio-set-id + audio-set-mixer + audio-set-streamtype + audio-set-ext-id + audio-set-attributes + audio-set-karaoke diff --git a/Documentation/media/uapi/dvb/audio_h.rst b/Documentation/media/uapi/dvb/audio_h.rst new file mode 100644 index 000000000000..e00c3010fdf9 --- /dev/null +++ b/Documentation/media/uapi/dvb/audio_h.rst @@ -0,0 +1,9 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _audio_h: + +********************* +DVB Audio Header File +********************* + +.. kernel-include:: $BUILDDIR/audio.h.rst diff --git a/Documentation/media/uapi/dvb/ca-fclose.rst b/Documentation/media/uapi/dvb/ca-fclose.rst new file mode 100644 index 000000000000..16d7a1e76193 --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-fclose.rst @@ -0,0 +1,54 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _ca_fclose: + +============== +DVB CA close() +============== + +Name +---- + +DVB CA close() + + +Synopsis +-------- + +.. cpp:function:: int close(int fd) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + +Description +----------- + +This system call closes a previously opened audio device. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EBADF`` + + - fd is not a valid open file descriptor. diff --git a/Documentation/media/uapi/dvb/ca-fopen.rst b/Documentation/media/uapi/dvb/ca-fopen.rst new file mode 100644 index 000000000000..f284461cce20 --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-fopen.rst @@ -0,0 +1,109 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _ca_fopen: + +============= +DVB CA open() +============= + +Name +---- + +DVB CA open() + + +Synopsis +-------- + +.. cpp:function:: int open(const char *deviceName, int flags) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - const char \*deviceName + + - Name of specific video device. + + - .. row 2 + + - int flags + + - A bit-wise OR of the following flags: + + - .. row 3 + + - + - O_RDONLY read-only access + + - .. row 4 + + - + - O_RDWR read/write access + + - .. row 5 + + - + - O_NONBLOCK open in non-blocking mode + + - .. row 6 + + - + - (blocking mode is the default) + + +Description +----------- + +This system call opens a named ca device (e.g. /dev/ost/ca) for +subsequent use. + +When an open() call has succeeded, the device will be ready for use. The +significance of blocking or non-blocking mode is described in the +documentation for functions where there is a difference. It does not +affect the semantics of the open() call itself. A device opened in +blocking mode can later be put into non-blocking mode (and vice versa) +using the F_SETFL command of the fcntl system call. This is a standard +system call, documented in the Linux manual page for fcntl. Only one +user can open the CA Device in O_RDWR mode. All other attempts to open +the device in this mode will fail, and an error code will be returned. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``ENODEV`` + + - Device driver not loaded/available. + + - .. row 2 + + - ``EINTERNAL`` + + - Internal error. + + - .. row 3 + + - ``EBUSY`` + + - Device or resource busy. + + - .. row 4 + + - ``EINVAL`` + + - Invalid argument. diff --git a/Documentation/media/uapi/dvb/ca-get-cap.rst b/Documentation/media/uapi/dvb/ca-get-cap.rst new file mode 100644 index 000000000000..891fbf2d9a84 --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-get-cap.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CA_GET_CAP: + +========== +CA_GET_CAP +========== + +Name +---- + +CA_GET_CAP + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = CA_GET_CAP, ca_caps_t *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals CA_GET_CAP for this command. + + - .. row 3 + + - ca_caps_t * + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-get-descr-info.rst b/Documentation/media/uapi/dvb/ca-get-descr-info.rst new file mode 100644 index 000000000000..cf8e8242db66 --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-get-descr-info.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CA_GET_DESCR_INFO: + +================= +CA_GET_DESCR_INFO +================= + +Name +---- + +CA_GET_DESCR_INFO + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = CA_GET_DESCR_INFO, ca_descr_info_t *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals CA_GET_DESCR_INFO for this command. + + - .. row 3 + + - ca_descr_info_t \* + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-get-msg.rst b/Documentation/media/uapi/dvb/ca-get-msg.rst new file mode 100644 index 000000000000..56004d5ea3ab --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-get-msg.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CA_GET_MSG: + +========== +CA_GET_MSG +========== + +Name +---- + +CA_GET_MSG + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = CA_GET_MSG, ca_msg_t *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals CA_GET_MSG for this command. + + - .. row 3 + + - ca_msg_t \* + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-get-slot-info.rst b/Documentation/media/uapi/dvb/ca-get-slot-info.rst new file mode 100644 index 000000000000..9fea28ccad0f --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-get-slot-info.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CA_GET_SLOT_INFO: + +================ +CA_GET_SLOT_INFO +================ + +Name +---- + +CA_GET_SLOT_INFO + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = CA_GET_SLOT_INFO, ca_slot_info_t *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals CA_GET_SLOT_INFO for this command. + + - .. row 3 + + - ca_slot_info_t \* + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-reset.rst b/Documentation/media/uapi/dvb/ca-reset.rst new file mode 100644 index 000000000000..d5a50088fc2d --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-reset.rst @@ -0,0 +1,53 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CA_RESET: + +======== +CA_RESET +======== + +Name +---- + +CA_RESET + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = CA_RESET) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals CA_RESET for this command. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-send-msg.rst b/Documentation/media/uapi/dvb/ca-send-msg.rst new file mode 100644 index 000000000000..18974e61e788 --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-send-msg.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CA_SEND_MSG: + +=========== +CA_SEND_MSG +=========== + +Name +---- + +CA_SEND_MSG + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = CA_SEND_MSG, ca_msg_t *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals CA_SEND_MSG for this command. + + - .. row 3 + + - ca_msg_t \* + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-set-descr.rst b/Documentation/media/uapi/dvb/ca-set-descr.rst new file mode 100644 index 000000000000..293e6da5059f --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-set-descr.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CA_SET_DESCR: + +============ +CA_SET_DESCR +============ + +Name +---- + +CA_SET_DESCR + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = CA_SET_DESCR, ca_descr_t *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals CA_SET_DESCR for this command. + + - .. row 3 + + - ca_descr_t \* + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca-set-pid.rst b/Documentation/media/uapi/dvb/ca-set-pid.rst new file mode 100644 index 000000000000..5afa2fae3206 --- /dev/null +++ b/Documentation/media/uapi/dvb/ca-set-pid.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _CA_SET_PID: + +========== +CA_SET_PID +========== + +Name +---- + +CA_SET_PID + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = CA_SET_PID, ca_pid_t *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals CA_SET_PID for this command. + + - .. row 3 + + - ca_pid_t \* + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/ca.rst b/Documentation/media/uapi/dvb/ca.rst new file mode 100644 index 000000000000..14b14abda1ae --- /dev/null +++ b/Documentation/media/uapi/dvb/ca.rst @@ -0,0 +1,18 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb_ca: + +############# +DVB CA Device +############# +The DVB CA device controls the conditional access hardware. It can be +accessed through ``/dev/dvb/adapter?/ca?``. Data types and and ioctl +definitions can be accessed by including ``linux/dvb/ca.h`` in your +application. + + +.. toctree:: + :maxdepth: 1 + + ca_data_types + ca_function_calls diff --git a/Documentation/media/uapi/dvb/ca_data_types.rst b/Documentation/media/uapi/dvb/ca_data_types.rst new file mode 100644 index 000000000000..025f910ae945 --- /dev/null +++ b/Documentation/media/uapi/dvb/ca_data_types.rst @@ -0,0 +1,110 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _ca_data_types: + +************* +CA Data Types +************* + + +.. _ca-slot-info: + +ca_slot_info_t +============== + + +.. code-block:: c + + typedef struct ca_slot_info { + int num; /* slot number */ + + int type; /* CA interface this slot supports */ + #define CA_CI 1 /* CI high level interface */ + #define CA_CI_LINK 2 /* CI link layer level interface */ + #define CA_CI_PHYS 4 /* CI physical layer level interface */ + #define CA_DESCR 8 /* built-in descrambler */ + #define CA_SC 128 /* simple smart card interface */ + + unsigned int flags; + #define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */ + #define CA_CI_MODULE_READY 2 + } ca_slot_info_t; + + +.. _ca-descr-info: + +ca_descr_info_t +=============== + + +.. code-block:: c + + typedef struct ca_descr_info { + unsigned int num; /* number of available descramblers (keys) */ + unsigned int type; /* type of supported scrambling system */ + #define CA_ECD 1 + #define CA_NDS 2 + #define CA_DSS 4 + } ca_descr_info_t; + + +.. _ca-caps: + +ca_caps_t +========= + + +.. code-block:: c + + typedef struct ca_caps { + unsigned int slot_num; /* total number of CA card and module slots */ + unsigned int slot_type; /* OR of all supported types */ + unsigned int descr_num; /* total number of descrambler slots (keys) */ + unsigned int descr_type;/* OR of all supported types */ + } ca_cap_t; + + +.. _ca-msg: + +ca_msg_t +======== + + +.. code-block:: c + + /* a message to/from a CI-CAM */ + typedef struct ca_msg { + unsigned int index; + unsigned int type; + unsigned int length; + unsigned char msg[256]; + } ca_msg_t; + + +.. _ca-descr: + +ca_descr_t +========== + + +.. code-block:: c + + typedef struct ca_descr { + unsigned int index; + unsigned int parity; + unsigned char cw[8]; + } ca_descr_t; + + +.. _ca-pid: + +ca-pid +====== + + +.. code-block:: c + + typedef struct ca_pid { + unsigned int pid; + int index; /* -1 == disable*/ + } ca_pid_t; diff --git a/Documentation/media/uapi/dvb/ca_function_calls.rst b/Documentation/media/uapi/dvb/ca_function_calls.rst new file mode 100644 index 000000000000..c085a0ebbc05 --- /dev/null +++ b/Documentation/media/uapi/dvb/ca_function_calls.rst @@ -0,0 +1,21 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _ca_function_calls: + +***************** +CA Function Calls +***************** + +.. toctree:: + :maxdepth: 1 + + ca-fopen + ca-fclose + ca-reset + ca-get-cap + ca-get-slot-info + ca-get-descr-info + ca-get-msg + ca-send-msg + ca-set-descr + ca-set-pid diff --git a/Documentation/media/uapi/dvb/ca_h.rst b/Documentation/media/uapi/dvb/ca_h.rst new file mode 100644 index 000000000000..f513592ef529 --- /dev/null +++ b/Documentation/media/uapi/dvb/ca_h.rst @@ -0,0 +1,9 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _ca_h: + +********************************** +DVB Conditional Access Header File +********************************** + +.. kernel-include:: $BUILDDIR/ca.h.rst diff --git a/Documentation/media/uapi/dvb/demux.rst b/Documentation/media/uapi/dvb/demux.rst new file mode 100644 index 000000000000..b12b5a2dac94 --- /dev/null +++ b/Documentation/media/uapi/dvb/demux.rst @@ -0,0 +1,18 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb_demux: + +################ +DVB Demux Device +################ +The DVB demux device controls the filters of the DVB hardware/software. +It can be accessed through ``/dev/adapter?/demux?``. Data types and and +ioctl definitions can be accessed by including ``linux/dvb/dmx.h`` in +your application. + + +.. toctree:: + :maxdepth: 1 + + dmx_types + dmx_fcalls diff --git a/Documentation/media/uapi/dvb/dmx-add-pid.rst b/Documentation/media/uapi/dvb/dmx-add-pid.rst new file mode 100644 index 000000000000..6343035653ac --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-add-pid.rst @@ -0,0 +1,61 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_ADD_PID: + +=========== +DMX_ADD_PID +=========== + +Name +---- + +DMX_ADD_PID + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = DMX_ADD_PID, __u16 *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_ADD_PID for this command. + + - .. row 3 + + - __u16 * + + - PID number to be filtered. + + +Description +----------- + +This ioctl call allows to add multiple PIDs to a transport stream filter +previously set up with DMX_SET_PES_FILTER and output equal to +DMX_OUT_TSDEMUX_TAP. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-fclose.rst b/Documentation/media/uapi/dvb/dmx-fclose.rst new file mode 100644 index 000000000000..f54c2a1220c1 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-fclose.rst @@ -0,0 +1,55 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dmx_fclose: + +================= +DVB demux close() +================= + +Name +---- + +DVB demux close() + + +Synopsis +-------- + +.. cpp:function:: int close(int fd) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + +Description +----------- + +This system call deactivates and deallocates a filter that was +previously allocated via the open() call. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EBADF`` + + - fd is not a valid open file descriptor. diff --git a/Documentation/media/uapi/dvb/dmx-fopen.rst b/Documentation/media/uapi/dvb/dmx-fopen.rst new file mode 100644 index 000000000000..76dbb42713ad --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-fopen.rst @@ -0,0 +1,108 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dmx_fopen: + +================ +DVB demux open() +================ + +Name +---- + +DVB demux open() + + +Synopsis +-------- + +.. cpp:function:: int open(const char *deviceName, int flags) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - const char \*deviceName + + - Name of demux device. + + - .. row 2 + + - int flags + + - A bit-wise OR of the following flags: + + - .. row 3 + + - + - O_RDWR read/write access + + - .. row 4 + + - + - O_NONBLOCK open in non-blocking mode + + - .. row 5 + + - + - (blocking mode is the default) + + +Description +----------- + +This system call, used with a device name of /dev/dvb/adapter0/demux0, +allocates a new filter and returns a handle which can be used for +subsequent control of that filter. This call has to be made for each +filter to be used, i.e. every returned file descriptor is a reference to +a single filter. /dev/dvb/adapter0/dvr0 is a logical device to be used +for retrieving Transport Streams for digital video recording. When +reading from this device a transport stream containing the packets from +all PES filters set in the corresponding demux device +(/dev/dvb/adapter0/demux0) having the output set to DMX_OUT_TS_TAP. A +recorded Transport Stream is replayed by writing to this device. + +The significance of blocking or non-blocking mode is described in the +documentation for functions where there is a difference. It does not +affect the semantics of the open() call itself. A device opened in +blocking mode can later be put into non-blocking mode (and vice versa) +using the F_SETFL command of the fcntl system call. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``ENODEV`` + + - Device driver not loaded/available. + + - .. row 2 + + - ``EINVAL`` + + - Invalid argument. + + - .. row 3 + + - ``EMFILE`` + + - “Too many open files”, i.e. no more filters available. + + - .. row 4 + + - ``ENOMEM`` + + - The driver failed to allocate enough memory. diff --git a/Documentation/media/uapi/dvb/dmx-fread.rst b/Documentation/media/uapi/dvb/dmx-fread.rst new file mode 100644 index 000000000000..d25b19e4f696 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-fread.rst @@ -0,0 +1,108 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dmx_fread: + +================ +DVB demux read() +================ + +Name +---- + +DVB demux read() + + +Synopsis +-------- + +.. cpp:function:: size_t read(int fd, void *buf, size_t count) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - void \*buf + + - Pointer to the buffer to be used for returned filtered data. + + - .. row 3 + + - size_t count + + - Size of buf. + + +Description +----------- + +This system call returns filtered data, which might be section or PES +data. The filtered data is transferred from the driver’s internal +circular buffer to buf. The maximum amount of data to be transferred is +implied by count. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EWOULDBLOCK`` + + - No data to return and O_NONBLOCK was specified. + + - .. row 2 + + - ``EBADF`` + + - fd is not a valid open file descriptor. + + - .. row 3 + + - ``ECRC`` + + - Last section had a CRC error - no data returned. The buffer is + flushed. + + - .. row 4 + + - ``EOVERFLOW`` + + - + + - .. row 5 + + - + - The filtered data was not read from the buffer in due time, + resulting in non-read data being lost. The buffer is flushed. + + - .. row 6 + + - ``ETIMEDOUT`` + + - The section was not loaded within the stated timeout period. See + ioctl DMX_SET_FILTER for how to set a timeout. + + - .. row 7 + + - ``EFAULT`` + + - The driver failed to write to the callers buffer due to an invalid + \*buf pointer. diff --git a/Documentation/media/uapi/dvb/dmx-fwrite.rst b/Documentation/media/uapi/dvb/dmx-fwrite.rst new file mode 100644 index 000000000000..9efd81a1b5c8 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-fwrite.rst @@ -0,0 +1,89 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dmx_fwrite: + +================= +DVB demux write() +================= + +Name +---- + +DVB demux write() + + +Synopsis +-------- + +.. cpp:function:: ssize_t write(int fd, const void *buf, size_t count) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - void \*buf + + - Pointer to the buffer containing the Transport Stream. + + - .. row 3 + + - size_t count + + - Size of buf. + + +Description +----------- + +This system call is only provided by the logical device +/dev/dvb/adapter0/dvr0, associated with the physical demux device that +provides the actual DVR functionality. It is used for replay of a +digitally recorded Transport Stream. Matching filters have to be defined +in the corresponding physical demux device, /dev/dvb/adapter0/demux0. +The amount of data to be transferred is implied by count. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EWOULDBLOCK`` + + - No data was written. This might happen if O_NONBLOCK was + specified and there is no more buffer space available (if + O_NONBLOCK is not specified the function will block until buffer + space is available). + + - .. row 2 + + - ``EBUSY`` + + - This error code indicates that there are conflicting requests. The + corresponding demux device is setup to receive data from the + front- end. Make sure that these filters are stopped and that the + filters with input set to DMX_IN_DVR are started. + + - .. row 3 + + - ``EBADF`` + + - fd is not a valid open file descriptor. diff --git a/Documentation/media/uapi/dvb/dmx-get-caps.rst b/Documentation/media/uapi/dvb/dmx-get-caps.rst new file mode 100644 index 000000000000..d0549eb7fbd3 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-get-caps.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_GET_CAPS: + +============ +DMX_GET_CAPS +============ + +Name +---- + +DMX_GET_CAPS + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = DMX_GET_CAPS, dmx_caps_t *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_GET_CAPS for this command. + + - .. row 3 + + - dmx_caps_t * + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-get-event.rst b/Documentation/media/uapi/dvb/dmx-get-event.rst new file mode 100644 index 000000000000..6a7550c63bb5 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-get-event.rst @@ -0,0 +1,76 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_GET_EVENT: + +============= +DMX_GET_EVENT +============= + +Name +---- + +DMX_GET_EVENT + + +Synopsis +-------- + +.. cpp:function:: int ioctl( int fd, int request = DMX_GET_EVENT, struct dmx_event *ev) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_GET_EVENT for this command. + + - .. row 3 + + - struct dmx_event \*ev + + - Pointer to the location where the event is to be stored. + + +Description +----------- + +This ioctl call returns an event if available. If an event is not +available, the behavior depends on whether the device is in blocking or +non-blocking mode. In the latter case, the call fails immediately with +errno set to ``EWOULDBLOCK``. In the former case, the call blocks until an +event becomes available. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EWOULDBLOCK`` + + - There is no event pending, and the device is in non-blocking mode. diff --git a/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst new file mode 100644 index 000000000000..ba5d30c913c8 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-get-pes-pids.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_GET_PES_PIDS: + +================ +DMX_GET_PES_PIDS +================ + +Name +---- + +DMX_GET_PES_PIDS + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = DMX_GET_PES_PIDS, __u16[5]) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_GET_PES_PIDS for this command. + + - .. row 3 + + - __u16[5] + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-get-stc.rst b/Documentation/media/uapi/dvb/dmx-get-stc.rst new file mode 100644 index 000000000000..bd477bb67082 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-get-stc.rst @@ -0,0 +1,77 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_GET_STC: + +=========== +DMX_GET_STC +=========== + +Name +---- + +DMX_GET_STC + + +Synopsis +-------- + +.. cpp:function:: int ioctl( int fd, int request = DMX_GET_STC, struct dmx_stc *stc) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_GET_STC for this command. + + - .. row 3 + + - struct dmx_stc \*stc + + - Pointer to the location where the stc is to be stored. + + +Description +----------- + +This ioctl call returns the current value of the system time counter +(which is driven by a PES filter of type DMX_PES_PCR). Some hardware +supports more than one STC, so you must specify which one by setting the +num field of stc before the ioctl (range 0...n). The result is returned +in form of a ratio with a 64 bit numerator and a 32 bit denominator, so +the real 90kHz STC value is stc->stc / stc->base . + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - Invalid stc number. diff --git a/Documentation/media/uapi/dvb/dmx-remove-pid.rst b/Documentation/media/uapi/dvb/dmx-remove-pid.rst new file mode 100644 index 000000000000..c8f038b40074 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-remove-pid.rst @@ -0,0 +1,62 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_REMOVE_PID: + +============== +DMX_REMOVE_PID +============== + +Name +---- + +DMX_REMOVE_PID + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = DMX_REMOVE_PID, __u16 *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_REMOVE_PID for this command. + + - .. row 3 + + - __u16 * + + - PID of the PES filter to be removed. + + +Description +----------- + +This ioctl call allows to remove a PID when multiple PIDs are set on a +transport stream filter, e. g. a filter previously set up with output +equal to DMX_OUT_TSDEMUX_TAP, created via either +DMX_SET_PES_FILTER or DMX_ADD_PID. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst new file mode 100644 index 000000000000..8ae48cf39cda --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-set-buffer-size.rst @@ -0,0 +1,62 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_SET_BUFFER_SIZE: + +=================== +DMX_SET_BUFFER_SIZE +=================== + +Name +---- + +DMX_SET_BUFFER_SIZE + + +Synopsis +-------- + +.. cpp:function:: int ioctl( int fd, int request = DMX_SET_BUFFER_SIZE, unsigned long size) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_SET_BUFFER_SIZE for this command. + + - .. row 3 + + - unsigned long size + + - Size of circular buffer. + + +Description +----------- + +This ioctl call is used to set the size of the circular buffer used for +filtered data. The default size is two maximum sized sections, i.e. if +this function is not called a buffer size of 2 \* 4096 bytes will be +used. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-set-filter.rst b/Documentation/media/uapi/dvb/dmx-set-filter.rst new file mode 100644 index 000000000000..8c929fa9b98c --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-set-filter.rst @@ -0,0 +1,68 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_SET_FILTER: + +============== +DMX_SET_FILTER +============== + +Name +---- + +DMX_SET_FILTER + + +Synopsis +-------- + +.. cpp:function:: int ioctl( int fd, int request = DMX_SET_FILTER, struct dmx_sct_filter_params *params) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_SET_FILTER for this command. + + - .. row 3 + + - struct dmx_sct_filter_params \*params + + - Pointer to structure containing filter parameters. + + +Description +----------- + +This ioctl call sets up a filter according to the filter and mask +parameters provided. A timeout may be defined stating number of seconds +to wait for a section to be loaded. A value of 0 means that no timeout +should be applied. Finally there is a flag field where it is possible to +state whether a section should be CRC-checked, whether the filter should +be a ”one-shot” filter, i.e. if the filtering operation should be +stopped after the first section is received, and whether the filtering +operation should be started immediately (without waiting for a +DMX_START ioctl call). If a filter was previously set-up, this filter +will be canceled, and the receive buffer will be flushed. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst b/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst new file mode 100644 index 000000000000..addc321011ce --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-set-pes-filter.rst @@ -0,0 +1,78 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_SET_PES_FILTER: + +================== +DMX_SET_PES_FILTER +================== + +Name +---- + +DMX_SET_PES_FILTER + + +Synopsis +-------- + +.. cpp:function:: int ioctl( int fd, int request = DMX_SET_PES_FILTER, struct dmx_pes_filter_params *params) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_SET_PES_FILTER for this command. + + - .. row 3 + + - struct dmx_pes_filter_params \*params + + - Pointer to structure containing filter parameters. + + +Description +----------- + +This ioctl call sets up a PES filter according to the parameters +provided. By a PES filter is meant a filter that is based just on the +packet identifier (PID), i.e. no PES header or payload filtering +capability is supported. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EBUSY`` + + - This error code indicates that there are conflicting requests. + There are active filters filtering data from another input source. + Make sure that these filters are stopped before starting this + filter. diff --git a/Documentation/media/uapi/dvb/dmx-set-source.rst b/Documentation/media/uapi/dvb/dmx-set-source.rst new file mode 100644 index 000000000000..99a8d5c82756 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-set-source.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_SET_SOURCE: + +============== +DMX_SET_SOURCE +============== + +Name +---- + +DMX_SET_SOURCE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = DMX_SET_SOURCE, dmx_source_t *) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_SET_SOURCE for this command. + + - .. row 3 + + - dmx_source_t * + + - Undocumented. + + +Description +----------- + +This ioctl is undocumented. Documentation is welcome. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx-start.rst b/Documentation/media/uapi/dvb/dmx-start.rst new file mode 100644 index 000000000000..9835d1e78400 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-start.rst @@ -0,0 +1,77 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_START: + +========= +DMX_START +========= + +Name +---- + +DMX_START + + +Synopsis +-------- + +.. cpp:function:: int ioctl( int fd, int request = DMX_START) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_START for this command. + + +Description +----------- + +This ioctl call is used to start the actual filtering operation defined +via the ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - Invalid argument, i.e. no filtering parameters provided via the + DMX_SET_FILTER or DMX_SET_PES_FILTER functions. + + - .. row 2 + + - ``EBUSY`` + + - This error code indicates that there are conflicting requests. + There are active filters filtering data from another input source. + Make sure that these filters are stopped before starting this + filter. diff --git a/Documentation/media/uapi/dvb/dmx-stop.rst b/Documentation/media/uapi/dvb/dmx-stop.rst new file mode 100644 index 000000000000..7e4bf09fc83e --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx-stop.rst @@ -0,0 +1,55 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _DMX_STOP: + +======== +DMX_STOP +======== + +Name +---- + +DMX_STOP + + +Synopsis +-------- + +.. cpp:function:: int ioctl( int fd, int request = DMX_STOP) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals DMX_STOP for this command. + + +Description +----------- + +This ioctl call is used to stop the actual filtering operation defined +via the ioctl calls DMX_SET_FILTER or DMX_SET_PES_FILTER and +started via the DMX_START command. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/dmx_fcalls.rst b/Documentation/media/uapi/dvb/dmx_fcalls.rst new file mode 100644 index 000000000000..77a1554d9834 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx_fcalls.rst @@ -0,0 +1,27 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dmx_fcalls: + +******************** +Demux Function Calls +******************** + +.. toctree:: + :maxdepth: 1 + + dmx-fopen + dmx-fclose + dmx-fread + dmx-fwrite + dmx-start + dmx-stop + dmx-set-filter + dmx-set-pes-filter + dmx-set-buffer-size + dmx-get-event + dmx-get-stc + dmx-get-pes-pids + dmx-get-caps + dmx-set-source + dmx-add-pid + dmx-remove-pid diff --git a/Documentation/media/uapi/dvb/dmx_h.rst b/Documentation/media/uapi/dvb/dmx_h.rst new file mode 100644 index 000000000000..4fd1704a0833 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx_h.rst @@ -0,0 +1,9 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dmx_h: + +********************* +DVB Demux Header File +********************* + +.. kernel-include:: $BUILDDIR/dmx.h.rst diff --git a/Documentation/media/uapi/dvb/dmx_types.rst b/Documentation/media/uapi/dvb/dmx_types.rst new file mode 100644 index 000000000000..7a8900af2680 --- /dev/null +++ b/Documentation/media/uapi/dvb/dmx_types.rst @@ -0,0 +1,242 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dmx_types: + +**************** +Demux Data Types +**************** + + +.. _dmx-output-t: + +Output for the demux +==================== + + +.. _dmx-output: + +.. flat-table:: enum dmx_output + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _DMX-OUT-DECODER: + + DMX_OUT_DECODER + + - Streaming directly to decoder. + + - .. row 3 + + - .. _DMX-OUT-TAP: + + DMX_OUT_TAP + + - Output going to a memory buffer (to be retrieved via the read + command). Delivers the stream output to the demux device on which + the ioctl is called. + + - .. row 4 + + - .. _DMX-OUT-TS-TAP: + + DMX_OUT_TS_TAP + + - Output multiplexed into a new TS (to be retrieved by reading from + the logical DVR device). Routes output to the logical DVR device + ``/dev/dvb/adapter?/dvr?``, which delivers a TS multiplexed from + all filters for which ``DMX_OUT_TS_TAP`` was specified. + + - .. row 5 + + - .. _DMX-OUT-TSDEMUX-TAP: + + DMX_OUT_TSDEMUX_TAP + + - Like :ref:`DMX_OUT_TS_TAP <DMX-OUT-TS-TAP>` but retrieved + from the DMX device. + + + +.. _dmx-input-t: + +dmx_input_t +=========== + + +.. code-block:: c + + typedef enum + { + DMX_IN_FRONTEND, /* Input from a front-end device. */ + DMX_IN_DVR /* Input from the logical DVR device. */ + } dmx_input_t; + + +.. _dmx-pes-type-t: + +dmx_pes_type_t +============== + + +.. code-block:: c + + typedef enum + { + DMX_PES_AUDIO0, + DMX_PES_VIDEO0, + DMX_PES_TELETEXT0, + DMX_PES_SUBTITLE0, + DMX_PES_PCR0, + + DMX_PES_AUDIO1, + DMX_PES_VIDEO1, + DMX_PES_TELETEXT1, + DMX_PES_SUBTITLE1, + DMX_PES_PCR1, + + DMX_PES_AUDIO2, + DMX_PES_VIDEO2, + DMX_PES_TELETEXT2, + DMX_PES_SUBTITLE2, + DMX_PES_PCR2, + + DMX_PES_AUDIO3, + DMX_PES_VIDEO3, + DMX_PES_TELETEXT3, + DMX_PES_SUBTITLE3, + DMX_PES_PCR3, + + DMX_PES_OTHER + } dmx_pes_type_t; + + +.. _dmx-filter: + +struct dmx_filter +================= + + +.. code-block:: c + + typedef struct dmx_filter + { + __u8 filter[DMX_FILTER_SIZE]; + __u8 mask[DMX_FILTER_SIZE]; + __u8 mode[DMX_FILTER_SIZE]; + } dmx_filter_t; + + +.. _dmx-sct-filter-params: + +struct dmx_sct_filter_params +============================ + + +.. code-block:: c + + struct dmx_sct_filter_params + { + __u16 pid; + dmx_filter_t filter; + __u32 timeout; + __u32 flags; + #define DMX_CHECK_CRC 1 + #define DMX_ONESHOT 2 + #define DMX_IMMEDIATE_START 4 + #define DMX_KERNEL_CLIENT 0x8000 + }; + + +.. _dmx-pes-filter-params: + +struct dmx_pes_filter_params +============================ + + +.. code-block:: c + + struct dmx_pes_filter_params + { + __u16 pid; + dmx_input_t input; + dmx_output_t output; + dmx_pes_type_t pes_type; + __u32 flags; + }; + + +.. _dmx-event: + +struct dmx_event +================ + + +.. code-block:: c + + struct dmx_event + { + dmx_event_t event; + time_t timeStamp; + union + { + dmx_scrambling_status_t scrambling; + } u; + }; + + +.. _dmx-stc: + +struct dmx_stc +============== + + +.. code-block:: c + + struct dmx_stc { + unsigned int num; /* input : which STC? 0..N */ + unsigned int base; /* output: divisor for stc to get 90 kHz clock */ + __u64 stc; /* output: stc in 'base'*90 kHz units */ + }; + + +.. _dmx-caps: + +struct dmx_caps +=============== + + +.. code-block:: c + + typedef struct dmx_caps { + __u32 caps; + int num_decoders; + } dmx_caps_t; + + +.. _dmx-source-t: + +enum dmx_source_t +================= + + +.. code-block:: c + + typedef enum { + DMX_SOURCE_FRONT0 = 0, + DMX_SOURCE_FRONT1, + DMX_SOURCE_FRONT2, + DMX_SOURCE_FRONT3, + DMX_SOURCE_DVR0 = 16, + DMX_SOURCE_DVR1, + DMX_SOURCE_DVR2, + DMX_SOURCE_DVR3 + } dmx_source_t; diff --git a/Documentation/media/uapi/dvb/dtv-fe-stats.rst b/Documentation/media/uapi/dvb/dtv-fe-stats.rst new file mode 100644 index 000000000000..7c105e2ab27e --- /dev/null +++ b/Documentation/media/uapi/dvb/dtv-fe-stats.rst @@ -0,0 +1,17 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dtv-fe-stats: + +******************* +struct dtv_fe_stats +******************* + + +.. code-block:: c + + #define MAX_DTV_STATS 4 + + struct dtv_fe_stats { + __u8 len; + struct dtv_stats stat[MAX_DTV_STATS]; + } __packed; diff --git a/Documentation/media/uapi/dvb/dtv-properties.rst b/Documentation/media/uapi/dvb/dtv-properties.rst new file mode 100644 index 000000000000..c13be5de4302 --- /dev/null +++ b/Documentation/media/uapi/dvb/dtv-properties.rst @@ -0,0 +1,15 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dtv-properties: + +********************* +struct dtv_properties +********************* + + +.. code-block:: c + + struct dtv_properties { + __u32 num; + struct dtv_property *props; + }; diff --git a/Documentation/media/uapi/dvb/dtv-property.rst b/Documentation/media/uapi/dvb/dtv-property.rst new file mode 100644 index 000000000000..5073a49def2a --- /dev/null +++ b/Documentation/media/uapi/dvb/dtv-property.rst @@ -0,0 +1,31 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dtv-property: + +******************* +struct dtv_property +******************* + + +.. code-block:: c + + /* Reserved fields should be set to 0 */ + + struct dtv_property { + __u32 cmd; + __u32 reserved[3]; + union { + __u32 data; + struct dtv_fe_stats st; + struct { + __u8 data[32]; + __u32 len; + __u32 reserved1[3]; + void *reserved2; + } buffer; + } u; + int result; + } __attribute__ ((packed)); + + /* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */ + #define DTV_IOCTL_MAX_MSGS 64 diff --git a/Documentation/media/uapi/dvb/dtv-stats.rst b/Documentation/media/uapi/dvb/dtv-stats.rst new file mode 100644 index 000000000000..2cfdca00f164 --- /dev/null +++ b/Documentation/media/uapi/dvb/dtv-stats.rst @@ -0,0 +1,18 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dtv-stats: + +**************** +struct dtv_stats +**************** + + +.. code-block:: c + + struct dtv_stats { + __u8 scale; /* enum fecap_scale_params type */ + union { + __u64 uvalue; /* for counters and relative scales */ + __s64 svalue; /* for 1/1000 dB measures */ + }; + } __packed; diff --git a/Documentation/media/uapi/dvb/dvb-fe-read-status.rst b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst new file mode 100644 index 000000000000..1c708c5e6bc0 --- /dev/null +++ b/Documentation/media/uapi/dvb/dvb-fe-read-status.rst @@ -0,0 +1,22 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb-fe-read-status: + +*************************************** +Querying frontend status and statistics +*************************************** + +Once :ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` is called, the +frontend will run a kernel thread that will periodically check for the +tuner lock status and provide statistics about the quality of the +signal. + +The information about the frontend tuner locking status can be queried +using :ref:`FE_READ_STATUS`. + +Signal statistics are provided via +:ref:`FE_GET_PROPERTY`. Please note that several +statistics require the demodulator to be fully locked (e. g. with +FE_HAS_LOCK bit set). See +:ref:`Frontend statistics indicators <frontend-stat-properties>` for +more details. diff --git a/Documentation/media/uapi/dvb/dvb-frontend-event.rst b/Documentation/media/uapi/dvb/dvb-frontend-event.rst new file mode 100644 index 000000000000..78e72feaa178 --- /dev/null +++ b/Documentation/media/uapi/dvb/dvb-frontend-event.rst @@ -0,0 +1,15 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb-frontend-event: + +*************** +frontend events +*************** + + +.. code-block:: c + + struct dvb_frontend_event { + fe_status_t status; + struct dvb_frontend_parameters parameters; + }; diff --git a/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst new file mode 100644 index 000000000000..16cb581d5cff --- /dev/null +++ b/Documentation/media/uapi/dvb/dvb-frontend-parameters.rst @@ -0,0 +1,119 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb-frontend-parameters: + +******************* +frontend parameters +******************* + +The kind of parameters passed to the frontend device for tuning depend +on the kind of hardware you are using. + +The struct ``dvb_frontend_parameters`` uses an union with specific +per-system parameters. However, as newer delivery systems required more +data, the structure size weren't enough to fit, and just extending its +size would break the existing applications. So, those parameters were +replaced by the usage of +:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>` +ioctl's. The new API is flexible enough to add new parameters to +existing delivery systems, and to add newer delivery systems. + +So, newer applications should use +:ref:`FE_GET_PROPERTY/FE_SET_PROPERTY <FE_GET_PROPERTY>` +instead, in order to be able to support the newer System Delivery like +DVB-S2, DVB-T2, DVB-C2, ISDB, etc. + +All kinds of parameters are combined as an union in the +FrontendParameters structure: + + +.. code-block:: c + + struct dvb_frontend_parameters { + uint32_t frequency; /* (absolute) frequency in Hz for QAM/OFDM */ + /* intermediate frequency in kHz for QPSK */ + fe_spectral_inversion_t inversion; + union { + struct dvb_qpsk_parameters qpsk; + struct dvb_qam_parameters qam; + struct dvb_ofdm_parameters ofdm; + struct dvb_vsb_parameters vsb; + } u; + }; + +In the case of QPSK frontends the ``frequency`` field specifies the +intermediate frequency, i.e. the offset which is effectively added to +the local oscillator frequency (LOF) of the LNB. The intermediate +frequency has to be specified in units of kHz. For QAM and OFDM +frontends the ``frequency`` specifies the absolute frequency and is +given in Hz. + + +.. _dvb-qpsk-parameters: + +QPSK parameters +=============== + +For satellite QPSK frontends you have to use the ``dvb_qpsk_parameters`` +structure: + + +.. code-block:: c + + struct dvb_qpsk_parameters { + uint32_t symbol_rate; /* symbol rate in Symbols per second */ + fe_code_rate_t fec_inner; /* forward error correction (see above) */ + }; + + +.. _dvb-qam-parameters: + +QAM parameters +============== + +for cable QAM frontend you use the ``dvb_qam_parameters`` structure: + + +.. code-block:: c + + struct dvb_qam_parameters { + uint32_t symbol_rate; /* symbol rate in Symbols per second */ + fe_code_rate_t fec_inner; /* forward error correction (see above) */ + fe_modulation_t modulation; /* modulation type (see above) */ + }; + + +.. _dvb-vsb-parameters: + +VSB parameters +============== + +ATSC frontends are supported by the ``dvb_vsb_parameters`` structure: + + +.. code-block:: c + + struct dvb_vsb_parameters { + fe_modulation_t modulation; /* modulation type (see above) */ + }; + + +.. _dvb-ofdm-parameters: + +OFDM parameters +=============== + +DVB-T frontends are supported by the ``dvb_ofdm_parameters`` structure: + + +.. code-block:: c + + struct dvb_ofdm_parameters { + fe_bandwidth_t bandwidth; + fe_code_rate_t code_rate_HP; /* high priority stream code rate */ + fe_code_rate_t code_rate_LP; /* low priority stream code rate */ + fe_modulation_t constellation; /* modulation type (see above) */ + fe_transmit_mode_t transmission_mode; + fe_guard_interval_t guard_interval; + fe_hierarchy_t hierarchy_information; + }; diff --git a/Documentation/media/uapi/dvb/dvbapi.rst b/Documentation/media/uapi/dvb/dvbapi.rst new file mode 100644 index 000000000000..60fb3d46b1d6 --- /dev/null +++ b/Documentation/media/uapi/dvb/dvbapi.rst @@ -0,0 +1,98 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. include:: <isonum.txt> + +.. _dvbapi: + +############## +Digital TV API +############## + +**NOTE:** This API is also known as **DVB API**, although it is generic +enough to support all digital TV standards. + +**Version 5.10** + +.. toctree:: + :maxdepth: 1 + :numbered: + + intro + frontend + demux + ca + net + legacy_dvb_apis + examples + audio_h + ca_h + dmx_h + frontend_h + net_h + video_h + + +********************** +Revision and Copyright +********************** + +Authors: + +- J. K. Metzler, Ralph <rjkm@metzlerbros.de> + + - Original author of the DVB API documentation. + +- O. C. Metzler, Marcus <rjkm@metzlerbros.de> + + - Original author of the DVB API documentation. + +- Carvalho Chehab, Mauro <m.chehab@kernel.org> + + - Ported document to Docbook XML, addition of DVBv5 API, documentation gaps fix. + +**Copyright** |copy| 2002-2003 : Convergence GmbH + +**Copyright** |copy| 2009-2016 : Mauro Carvalho Chehab + +**************** +Revision History +**************** + +:revision: 2.1.0 / 2015-05-29 (*mcc*) + +DocBook improvements and cleanups, in order to document the system calls +on a more standard way and provide more description about the current +DVB API. + +:revision: 2.0.4 / 2011-05-06 (*mcc*) + +Add more information about DVB APIv5, better describing the frontend +GET/SET props ioctl's. + + +:revision: 2.0.3 / 2010-07-03 (*mcc*) + +Add some frontend capabilities flags, present on kernel, but missing at +the specs. + + +:revision: 2.0.2 / 2009-10-25 (*mcc*) + +documents FE_SET_FRONTEND_TUNE_MODE and +FE_DISHETWORK_SEND_LEGACY_CMD ioctls. + + +:revision: 2.0.1 / 2009-09-16 (*mcc*) + +Added ISDB-T test originally written by Patrick Boettcher + + +:revision: 2.0.0 / 2009-09-06 (*mcc*) + +Conversion from LaTex to DocBook XML. The contents is the same as the +original LaTex version. + + +:revision: 1.0.0 / 2003-07-24 (*rjkm*) + +Initial revision on LaTEX. diff --git a/Documentation/media/uapi/dvb/dvbproperty-006.rst b/Documentation/media/uapi/dvb/dvbproperty-006.rst new file mode 100644 index 000000000000..3343a0f306fe --- /dev/null +++ b/Documentation/media/uapi/dvb/dvbproperty-006.rst @@ -0,0 +1,12 @@ +.. -*- coding: utf-8; mode: rst -*- + +************** +Property types +************** + +On :ref:`FE_GET_PROPERTY and FE_SET_PROPERTY <FE_GET_PROPERTY>`, +the actual action is determined by the dtv_property cmd/data pairs. +With one single ioctl, is possible to get/set up to 64 properties. The +actual meaning of each property is described on the next sections. + +The available frontend property types are shown on the next section. diff --git a/Documentation/media/uapi/dvb/dvbproperty.rst b/Documentation/media/uapi/dvb/dvbproperty.rst new file mode 100644 index 000000000000..9b3782c5bb44 --- /dev/null +++ b/Documentation/media/uapi/dvb/dvbproperty.rst @@ -0,0 +1,111 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend-properties: + +DVB Frontend properties +======================= + +Tuning into a Digital TV physical channel and starting decoding it +requires changing a set of parameters, in order to control the tuner, +the demodulator, the Linear Low-noise Amplifier (LNA) and to set the +antenna subsystem via Satellite Equipment Control (SEC), on satellite +systems. The actual parameters are specific to each particular digital +TV standards, and may change as the digital TV specs evolves. + +In the past, the strategy used was to have a union with the parameters +needed to tune for DVB-S, DVB-C, DVB-T and ATSC delivery systems grouped +there. The problem is that, as the second generation standards appeared, +those structs were not big enough to contain the additional parameters. +Also, the union didn't have any space left to be expanded without +breaking userspace. So, the decision was to deprecate the legacy +union/struct based approach, in favor of a properties set approach. + +NOTE: on Linux DVB API version 3, setting a frontend were done via +:ref:`struct dvb_frontend_parameters <dvb-frontend-parameters>`. +This got replaced on version 5 (also called "S2API", as this API were +added originally_enabled to provide support for DVB-S2), because the +old API has a very limited support to new standards and new hardware. +This section describes the new and recommended way to set the frontend, +with suppports all digital TV delivery systems. + +Example: with the properties based approach, in order to set the tuner +to a DVB-C channel at 651 kHz, modulated with 256-QAM, FEC 3/4 and +symbol rate of 5.217 Mbauds, those properties should be sent to +:ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` ioctl: + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` = + SYS_DVBC_ANNEX_A + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` = 651000000 + +- :ref:`DTV_MODULATION <DTV-MODULATION>` = QAM_256 + +- :ref:`DTV_INVERSION <DTV-INVERSION>` = INVERSION_AUTO + +- :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>` = 5217000 + +- :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` = FEC_3_4 + +- :ref:`DTV_TUNE <DTV-TUNE>` + +The code that would do the above is: + + +.. code-block:: c + + #include <stdio.h> + #include <fcntl.h> + #include <sys/ioctl.h> + #include <linux/dvb/frontend.h> + + static struct dtv_property props[] = { + { .cmd = DTV_DELIVERY_SYSTEM, .u.data = SYS_DVBC_ANNEX_A }, + { .cmd = DTV_FREQUENCY, .u.data = 651000000 }, + { .cmd = DTV_MODULATION, .u.data = QAM_256 }, + { .cmd = DTV_INVERSION, .u.data = INVERSION_AUTO }, + { .cmd = DTV_SYMBOL_RATE, .u.data = 5217000 }, + { .cmd = DTV_INNER_FEC, .u.data = FEC_3_4 }, + { .cmd = DTV_TUNE } + }; + + static struct dtv_properties dtv_prop = { + .num = 6, .props = props + }; + + int main(void) + { + int fd = open("/dev/dvb/adapter0/frontend0", O_RDWR); + + if (!fd) { + perror ("open"); + return -1; + } + if (ioctl(fd, FE_SET_PROPERTY, &dtv_prop) == -1) { + perror("ioctl"); + return -1; + } + printf("Frontend set\\n"); + return 0; + } + +NOTE: While it is possible to directly call the Kernel code like the +above example, it is strongly recommended to use +`libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__, as it +provides abstraction to work with the supported digital TV standards and +provides methods for usual operations like program scanning and to +read/write channel descriptor files. + + +.. toctree:: + :maxdepth: 1 + + dtv-stats + dtv-fe-stats + dtv-property + dtv-properties + dvbproperty-006 + fe_property_parameters + frontend-stat-properties + frontend-property-terrestrial-systems + frontend-property-cable-systems + frontend-property-satellite-systems diff --git a/Documentation/media/uapi/dvb/examples.rst b/Documentation/media/uapi/dvb/examples.rst new file mode 100644 index 000000000000..64e029ecd047 --- /dev/null +++ b/Documentation/media/uapi/dvb/examples.rst @@ -0,0 +1,380 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb_examples: + +******** +Examples +******** + +In this section we would like to present some examples for using the DVB +API. + +NOTE: This section is out of date, and the code below won't even +compile. Please refer to the +`libdvbv5 <https://linuxtv.org/docs/libdvbv5/index.html>`__ for +updated/recommended examples. + + +.. _tuning: + +Tuning +====== + +We will start with a generic tuning subroutine that uses the frontend +and SEC, as well as the demux devices. The example is given for QPSK +tuners, but can easily be adjusted for QAM. + + +.. code-block:: c + + #include <sys/ioctl.h> + #include <stdio.h> + #include <stdint.h> + #include <sys/types.h> + #include <sys/stat.h> + #include <fcntl.h> + #include <time.h> + #include <unistd.h> + + #include <linux/dvb/dmx.h> + #include <linux/dvb/frontend.h> + #include <linux/dvb/sec.h> + #include <sys/poll.h> + + #define DMX "/dev/dvb/adapter0/demux1" + #define FRONT "/dev/dvb/adapter0/frontend1" + #define SEC "/dev/dvb/adapter0/sec1" + + /* routine for checking if we have a signal and other status information*/ + int FEReadStatus(int fd, fe_status_t *stat) + { + int ans; + + if ( (ans = ioctl(fd,FE_READ_STATUS,stat) < 0)){ + perror("FE READ STATUS: "); + return -1; + } + + if (*stat & FE_HAS_POWER) + printf("FE HAS POWER\\n"); + + if (*stat & FE_HAS_SIGNAL) + printf("FE HAS SIGNAL\\n"); + + if (*stat & FE_SPECTRUM_INV) + printf("SPEKTRUM INV\\n"); + + return 0; + } + + + /* tune qpsk */ + /* freq: frequency of transponder */ + /* vpid, apid, tpid: PIDs of video, audio and teletext TS packets */ + /* diseqc: DiSEqC address of the used LNB */ + /* pol: Polarisation */ + /* srate: Symbol Rate */ + /* fec. FEC */ + /* lnb_lof1: local frequency of lower LNB band */ + /* lnb_lof2: local frequency of upper LNB band */ + /* lnb_slof: switch frequency of LNB */ + + int set_qpsk_channel(int freq, int vpid, int apid, int tpid, + int diseqc, int pol, int srate, int fec, int lnb_lof1, + int lnb_lof2, int lnb_slof) + { + struct secCommand scmd; + struct secCmdSequence scmds; + struct dmx_pes_filter_params pesFilterParams; + FrontendParameters frp; + struct pollfd pfd[1]; + FrontendEvent event; + int demux1, demux2, demux3, front; + + frequency = (uint32_t) freq; + symbolrate = (uint32_t) srate; + + if((front = open(FRONT,O_RDWR)) < 0){ + perror("FRONTEND DEVICE: "); + return -1; + } + + if((sec = open(SEC,O_RDWR)) < 0){ + perror("SEC DEVICE: "); + return -1; + } + + if (demux1 < 0){ + if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + if (demux2 < 0){ + if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + if (demux3 < 0){ + if ((demux3=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + if (freq < lnb_slof) { + frp.Frequency = (freq - lnb_lof1); + scmds.continuousTone = SEC_TONE_OFF; + } else { + frp.Frequency = (freq - lnb_lof2); + scmds.continuousTone = SEC_TONE_ON; + } + frp.Inversion = INVERSION_AUTO; + if (pol) scmds.voltage = SEC_VOLTAGE_18; + else scmds.voltage = SEC_VOLTAGE_13; + + scmd.type=0; + scmd.u.diseqc.addr=0x10; + scmd.u.diseqc.cmd=0x38; + scmd.u.diseqc.numParams=1; + scmd.u.diseqc.params[0] = 0xF0 | ((diseqc * 4) & 0x0F) | + (scmds.continuousTone == SEC_TONE_ON ? 1 : 0) | + (scmds.voltage==SEC_VOLTAGE_18 ? 2 : 0); + + scmds.miniCommand=SEC_MINI_NONE; + scmds.numCommands=1; + scmds.commands=&scmd; + if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){ + perror("SEC SEND: "); + return -1; + } + + if (ioctl(sec, SEC_SEND_SEQUENCE, &scmds) < 0){ + perror("SEC SEND: "); + return -1; + } + + frp.u.qpsk.SymbolRate = srate; + frp.u.qpsk.FEC_inner = fec; + + if (ioctl(front, FE_SET_FRONTEND, &frp) < 0){ + perror("QPSK TUNE: "); + return -1; + } + + pfd[0].fd = front; + pfd[0].events = POLLIN; + + if (poll(pfd,1,3000)){ + if (pfd[0].revents & POLLIN){ + printf("Getting QPSK event\\n"); + if ( ioctl(front, FE_GET_EVENT, &event) + + == -EOVERFLOW){ + perror("qpsk get event"); + return -1; + } + printf("Received "); + switch(event.type){ + case FE_UNEXPECTED_EV: + printf("unexpected event\\n"); + return -1; + case FE_FAILURE_EV: + printf("failure event\\n"); + return -1; + + case FE_COMPLETION_EV: + printf("completion event\\n"); + } + } + } + + + pesFilterParams.pid = vpid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_DECODER; + pesFilterParams.pes_type = DMX_PES_VIDEO; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("set_vpid"); + return -1; + } + + pesFilterParams.pid = apid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_DECODER; + pesFilterParams.pes_type = DMX_PES_AUDIO; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("set_apid"); + return -1; + } + + pesFilterParams.pid = tpid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_DECODER; + pesFilterParams.pes_type = DMX_PES_TELETEXT; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux3, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("set_tpid"); + return -1; + } + + return has_signal(fds); + } + +The program assumes that you are using a universal LNB and a standard +DiSEqC switch with up to 4 addresses. Of course, you could build in some +more checking if tuning was successful and maybe try to repeat the +tuning process. Depending on the external hardware, i.e. LNB and DiSEqC +switch, and weather conditions this may be necessary. + + +.. _the_dvr_device: + +The DVR device +============== + +The following program code shows how to use the DVR device for +recording. + + +.. code-block:: c + + #include <sys/ioctl.h> + #include <stdio.h> + #include <stdint.h> + #include <sys/types.h> + #include <sys/stat.h> + #include <fcntl.h> + #include <time.h> + #include <unistd.h> + + #include <linux/dvb/dmx.h> + #include <linux/dvb/video.h> + #include <sys/poll.h> + #define DVR "/dev/dvb/adapter0/dvr1" + #define AUDIO "/dev/dvb/adapter0/audio1" + #define VIDEO "/dev/dvb/adapter0/video1" + + #define BUFFY (188*20) + #define MAX_LENGTH (1024*1024*5) /* record 5MB */ + + + /* switch the demuxes to recording, assuming the transponder is tuned */ + + /* demux1, demux2: file descriptor of video and audio filters */ + /* vpid, apid: PIDs of video and audio channels */ + + int switch_to_record(int demux1, int demux2, uint16_t vpid, uint16_t apid) + { + struct dmx_pes_filter_params pesFilterParams; + + if (demux1 < 0){ + if ((demux1=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + if (demux2 < 0){ + if ((demux2=open(DMX, O_RDWR|O_NONBLOCK)) + < 0){ + perror("DEMUX DEVICE: "); + return -1; + } + } + + pesFilterParams.pid = vpid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_TS_TAP; + pesFilterParams.pes_type = DMX_PES_VIDEO; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux1, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("DEMUX DEVICE"); + return -1; + } + pesFilterParams.pid = apid; + pesFilterParams.input = DMX_IN_FRONTEND; + pesFilterParams.output = DMX_OUT_TS_TAP; + pesFilterParams.pes_type = DMX_PES_AUDIO; + pesFilterParams.flags = DMX_IMMEDIATE_START; + if (ioctl(demux2, DMX_SET_PES_FILTER, &pesFilterParams) < 0){ + perror("DEMUX DEVICE"); + return -1; + } + return 0; + } + + /* start recording MAX_LENGTH , assuming the transponder is tuned */ + + /* demux1, demux2: file descriptor of video and audio filters */ + /* vpid, apid: PIDs of video and audio channels */ + int record_dvr(int demux1, int demux2, uint16_t vpid, uint16_t apid) + { + int i; + int len; + int written; + uint8_t buf[BUFFY]; + uint64_t length; + struct pollfd pfd[1]; + int dvr, dvr_out; + + /* open dvr device */ + if ((dvr = open(DVR, O_RDONLY|O_NONBLOCK)) < 0){ + perror("DVR DEVICE"); + return -1; + } + + /* switch video and audio demuxes to dvr */ + printf ("Switching dvr on\\n"); + i = switch_to_record(demux1, demux2, vpid, apid); + printf("finished: "); + + printf("Recording %2.0f MB of test file in TS format\\n", + MAX_LENGTH/(1024.0*1024.0)); + length = 0; + + /* open output file */ + if ((dvr_out = open(DVR_FILE,O_WRONLY|O_CREAT + |O_TRUNC, S_IRUSR|S_IWUSR + |S_IRGRP|S_IWGRP|S_IROTH| + S_IWOTH)) < 0){ + perror("Can't open file for dvr test"); + return -1; + } + + pfd[0].fd = dvr; + pfd[0].events = POLLIN; + + /* poll for dvr data and write to file */ + while (length < MAX_LENGTH ) { + if (poll(pfd,1,1)){ + if (pfd[0].revents & POLLIN){ + len = read(dvr, buf, BUFFY); + if (len < 0){ + perror("recording"); + return -1; + } + if (len > 0){ + written = 0; + while (written < len) + written += + write (dvr_out, + buf, len); + length += len; + printf("written %2.0f MB\\r", + length/1024./1024.); + } + } + } + } + return 0; + } diff --git a/Documentation/media/uapi/dvb/fe-bandwidth-t.rst b/Documentation/media/uapi/dvb/fe-bandwidth-t.rst new file mode 100644 index 000000000000..8edaf1a8fbc8 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-bandwidth-t.rst @@ -0,0 +1,77 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _fe-bandwidth-t: + +****************** +Frontend bandwidth +****************** + + +.. _fe-bandwidth: + +.. flat-table:: enum fe_bandwidth + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _BANDWIDTH-AUTO: + + ``BANDWIDTH_AUTO`` + + - Autodetect bandwidth (if supported) + + - .. row 3 + + - .. _BANDWIDTH-1-712-MHZ: + + ``BANDWIDTH_1_712_MHZ`` + + - 1.712 MHz + + - .. row 4 + + - .. _BANDWIDTH-5-MHZ: + + ``BANDWIDTH_5_MHZ`` + + - 5 MHz + + - .. row 5 + + - .. _BANDWIDTH-6-MHZ: + + ``BANDWIDTH_6_MHZ`` + + - 6 MHz + + - .. row 6 + + - .. _BANDWIDTH-7-MHZ: + + ``BANDWIDTH_7_MHZ`` + + - 7 MHz + + - .. row 7 + + - .. _BANDWIDTH-8-MHZ: + + ``BANDWIDTH_8_MHZ`` + + - 8 MHz + + - .. row 8 + + - .. _BANDWIDTH-10-MHZ: + + ``BANDWIDTH_10_MHZ`` + + - 10 MHz diff --git a/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst new file mode 100644 index 000000000000..7bd02ac7bff4 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-diseqc-recv-slave-reply.rst @@ -0,0 +1,83 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_DISEQC_RECV_SLAVE_REPLY: + +******************************** +ioctl FE_DISEQC_RECV_SLAVE_REPLY +******************************** + +Name +==== + +FE_DISEQC_RECV_SLAVE_REPLY - Receives reply from a DiSEqC 2.0 command + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, struct dvb_diseqc_slave_reply *argp ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_DISEQC_RECV_SLAVE_REPLY + +``argp`` + pointer to struct + :ref:`dvb_diseqc_slave_reply <dvb-diseqc-slave-reply>` + + +Description +=========== + +Receives reply from a DiSEqC 2.0 command. + +.. _dvb-diseqc-slave-reply: + +struct dvb_diseqc_slave_reply +----------------------------- + +.. flat-table:: struct dvb_diseqc_slave_reply + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + + - .. row 1 + + - uint8_t + + - msg[4] + + - DiSEqC message (framing, data[3]) + + - .. row 2 + + - uint8_t + + - msg_len + + - Length of the DiSEqC message. Valid values are 0 to 4, where 0 + means no msg + + - .. row 3 + + - int + + - timeout + + - Return from ioctl after timeout ms with errorcode when no message + was received + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst b/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst new file mode 100644 index 000000000000..cab157054c13 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-diseqc-reset-overload.rst @@ -0,0 +1,45 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_DISEQC_RESET_OVERLOAD: + +****************************** +ioctl FE_DISEQC_RESET_OVERLOAD +****************************** + +Name +==== + +FE_DISEQC_RESET_OVERLOAD - Restores the power to the antenna subsystem, if it was powered off due - to power overload. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, NULL ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_DISEQC_RESET_OVERLOAD + + +Description +=========== + +If the bus has been automatically powered off due to power overload, +this ioctl call restores the power to the bus. The call requires +read/write access to the device. This call has no effect if the device +is manually powered off. Not all DVB adapters support this ioctl. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst new file mode 100644 index 000000000000..9b476545ef89 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-burst.rst @@ -0,0 +1,84 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_DISEQC_SEND_BURST: + +************************** +ioctl FE_DISEQC_SEND_BURST +************************** + +Name +==== + +FE_DISEQC_SEND_BURST - Sends a 22KHz tone burst for 2x1 mini DiSEqC satellite selection. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, enum fe_sec_mini_cmd *tone ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_DISEQC_SEND_BURST + +``tone`` + pointer to enum :ref:`fe_sec_mini_cmd <fe-sec-mini-cmd>` + + +Description +=========== + +This ioctl is used to set the generation of a 22kHz tone burst for mini +DiSEqC satellite selection for 2x1 switches. This call requires +read/write permissions. + +It provides support for what's specified at +`Digital Satellite Equipment Control (DiSEqC) - Simple "ToneBurst" Detection Circuit specification. <http://www.eutelsat.com/files/contributed/satellites/pdf/Diseqc/associated%20docs/simple_tone_burst_detec.pdf>`__ + +.. _fe-sec-mini-cmd-t: + +enum fe_sec_mini_cmd +==================== + +.. _fe-sec-mini-cmd: + +.. flat-table:: enum fe_sec_mini_cmd + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _SEC-MINI-A: + + ``SEC_MINI_A`` + + - Sends a mini-DiSEqC 22kHz '0' Tone Burst to select satellite-A + + - .. row 3 + + - .. _SEC-MINI-B: + + ``SEC_MINI_B`` + + - Sends a mini-DiSEqC 22kHz '1' Data Burst to select satellite-B + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst new file mode 100644 index 000000000000..58a5e6ac10bd --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-diseqc-send-master-cmd.rst @@ -0,0 +1,73 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_DISEQC_SEND_MASTER_CMD: + +******************************* +ioctl FE_DISEQC_SEND_MASTER_CMD +******************************* + +Name +==== + +FE_DISEQC_SEND_MASTER_CMD - Sends a DiSEqC command + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, struct dvb_diseqc_master_cmd *argp ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_DISEQC_SEND_MASTER_CMD + +``argp`` + pointer to struct + :ref:`dvb_diseqc_master_cmd <dvb-diseqc-master-cmd>` + + +Description +=========== + +Sends a DiSEqC command to the antenna subsystem. + +.. _dvb-diseqc-master-cmd: + +struct dvb_diseqc_master_cmd +============================ + +.. flat-table:: struct dvb_diseqc_master_cmd + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + + - .. row 1 + + - uint8_t + + - msg[6] + + - DiSEqC message (framing, address, command, data[3]) + + - .. row 2 + + - uint8_t + + - msg_len + + - Length of the DiSEqC message. Valid values are 3 to 6 + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + diff --git a/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst new file mode 100644 index 000000000000..9f71b39de0c2 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-dishnetwork-send-legacy-cmd.rst @@ -0,0 +1,54 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_DISHNETWORK_SEND_LEGACY_CMD: + +****************************** +FE_DISHNETWORK_SEND_LEGACY_CMD +****************************** + +Name +==== + +FE_DISHNETWORK_SEND_LEGACY_CMD + + +Synopsis +======== + +.. cpp:function:: int ioctl(int fd, int request = FE_DISHNETWORK_SEND_LEGACY_CMD, unsigned long cmd) + + +Arguments +========= + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - unsigned long cmd + + - sends the specified raw cmd to the dish via DISEqC. + + +Description +=========== + +WARNING: This is a very obscure legacy command, used only at stv0299 +driver. Should not be used on newer drivers. + +It provides a non-standard method for selecting Diseqc voltage on the +frontend, for Dish Network legacy switches. + +As support for this ioctl were added in 2004, this means that such +dishes were already legacy in 2004. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst b/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst new file mode 100644 index 000000000000..de99bf5fbf0e --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-enable-high-lnb-voltage.rst @@ -0,0 +1,52 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_ENABLE_HIGH_LNB_VOLTAGE: + +******************************** +ioctl FE_ENABLE_HIGH_LNB_VOLTAGE +******************************** + +Name +==== + +FE_ENABLE_HIGH_LNB_VOLTAGE - Select output DC level between normal LNBf voltages or higher LNBf - voltages. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, unsigned int high ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_ENABLE_HIGH_LNB_VOLTAGE + +``high`` + Valid flags: + + - 0 - normal 13V and 18V. + + - >0 - enables slightly higher voltages instead of 13/18V, in order + to compensate for long antenna cables. + + +Description +=========== + +Select output DC level between normal LNBf voltages or higher LNBf +voltages between 0 (normal) or a value grater than 0 for higher +voltages. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-get-event.rst b/Documentation/media/uapi/dvb/fe-get-event.rst new file mode 100644 index 000000000000..ffa3d04c6bd4 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-get-event.rst @@ -0,0 +1,87 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_GET_EVENT: + +************ +FE_GET_EVENT +************ + +Name +==== + +FE_GET_EVENT + + +Synopsis +======== + +.. cpp:function:: int ioctl(int fd, int request = QPSK_GET_EVENT, struct dvb_frontend_event *ev) + + +Arguments +========= + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals :ref:`FE_GET_EVENT` for this command. + + - .. row 3 + + - struct dvb_frontend_event \*ev + + - Points to the location where the event, + + - .. row 4 + + - + - if any, is to be stored. + + +Description +=========== + +This ioctl call returns a frontend event if available. If an event is +not available, the behavior depends on whether the device is in blocking +or non-blocking mode. In the latter case, the call fails immediately +with errno set to ``EWOULDBLOCK``. In the former case, the call blocks until +an event becomes available. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EWOULDBLOCK`` + + - There is no event pending, and the device is in non-blocking mode. + + - .. row 2 + + - ``EOVERFLOW`` + + - Overflow in event queue - one or more events were lost. diff --git a/Documentation/media/uapi/dvb/fe-get-frontend.rst b/Documentation/media/uapi/dvb/fe-get-frontend.rst new file mode 100644 index 000000000000..5d2df808df18 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-get-frontend.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_GET_FRONTEND: + +*************** +FE_GET_FRONTEND +*************** + +Name +==== + +FE_GET_FRONTEND + + +Synopsis +======== + +.. cpp:function:: int ioctl(int fd, int request = FE_GET_FRONTEND, struct dvb_frontend_parameters *p) + + +Arguments +========= + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals :ref:`FE_SET_FRONTEND` for this + command. + + - .. row 3 + + - struct dvb_frontend_parameters \*p + + - Points to parameters for tuning operation. + + +Description +=========== + +This ioctl call queries the currently effective frontend parameters. For +this command, read-only access to the device is sufficient. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - Maximum supported symbol rate reached. diff --git a/Documentation/media/uapi/dvb/fe-get-info.rst b/Documentation/media/uapi/dvb/fe-get-info.rst new file mode 100644 index 000000000000..9a9ddbcdb1ec --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-get-info.rst @@ -0,0 +1,428 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_GET_INFO: + +***************** +ioctl FE_GET_INFO +***************** + +Name +==== + +FE_GET_INFO - Query DVB frontend capabilities and returns information about the - front-end. This call only requires read-only access to the device + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, struct dvb_frontend_info *argp ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_GET_INFO + +``argp`` + pointer to struct struct + :ref:`dvb_frontend_info <dvb-frontend-info>` + + +Description +=========== + +All DVB frontend devices support the ``FE_GET_INFO`` ioctl. It is used +to identify kernel devices compatible with this specification and to +obtain information about driver and hardware capabilities. The ioctl +takes a pointer to dvb_frontend_info which is filled by the driver. +When the driver is not compatible with this specification the ioctl +returns an error. + +.. _dvb-frontend-info: + +struct dvb_frontend_info +======================== + +.. flat-table:: struct dvb_frontend_info + :header-rows: 0 + :stub-columns: 0 + :widths: 1 1 2 + + + - .. row 1 + + - char + + - name[128] + + - Name of the frontend + + - .. row 2 + + - fe_type_t + + - type + + - **DEPRECATED**. DVBv3 type. Should not be used on modern programs, + as a frontend may have more than one type. So, the DVBv5 API + should be used instead to enumerate and select the frontend type. + + - .. row 3 + + - uint32_t + + - frequency_min + + - Minimal frequency supported by the frontend + + - .. row 4 + + - uint32_t + + - frequency_max + + - Maximal frequency supported by the frontend + + - .. row 5 + + - uint32_t + + - frequency_stepsize + + - Frequency step - all frequencies are multiple of this value + + - .. row 6 + + - uint32_t + + - frequency_tolerance + + - Tolerance of the frequency + + - .. row 7 + + - uint32_t + + - symbol_rate_min + + - Minimal symbol rate (for Cable/Satellite systems), in bauds + + - .. row 8 + + - uint32_t + + - symbol_rate_max + + - Maximal symbol rate (for Cable/Satellite systems), in bauds + + - .. row 9 + + - uint32_t + + - symbol_rate_tolerance + + - Maximal symbol rate tolerance, in ppm + + - .. row 10 + + - uint32_t + + - notifier_delay + + - **DEPRECATED**. Not used by any driver. + + - .. row 11 + + - enum :ref:`fe_caps <fe-caps>` + + - caps + + - Capabilities supported by the frontend + + +NOTE: The frequencies are specified in Hz for Terrestrial and Cable +systems. They're specified in kHz for Satellite systems + + +.. _fe-caps-t: + +frontend capabilities +===================== + +Capabilities describe what a frontend can do. Some capabilities are +supported only on some specific frontend types. + + +.. _fe-caps: + +.. flat-table:: enum fe_caps + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _FE-IS-STUPID: + + ``FE_IS_STUPID`` + + - There's something wrong at the frontend, and it can't report its + capabilities + + - .. row 3 + + - .. _FE-CAN-INVERSION-AUTO: + + ``FE_CAN_INVERSION_AUTO`` + + - The frontend is capable of auto-detecting inversion + + - .. row 4 + + - .. _FE-CAN-FEC-1-2: + + ``FE_CAN_FEC_1_2`` + + - The frontend supports FEC 1/2 + + - .. row 5 + + - .. _FE-CAN-FEC-2-3: + + ``FE_CAN_FEC_2_3`` + + - The frontend supports FEC 2/3 + + - .. row 6 + + - .. _FE-CAN-FEC-3-4: + + ``FE_CAN_FEC_3_4`` + + - The frontend supports FEC 3/4 + + - .. row 7 + + - .. _FE-CAN-FEC-4-5: + + ``FE_CAN_FEC_4_5`` + + - The frontend supports FEC 4/5 + + - .. row 8 + + - .. _FE-CAN-FEC-5-6: + + ``FE_CAN_FEC_5_6`` + + - The frontend supports FEC 5/6 + + - .. row 9 + + - .. _FE-CAN-FEC-6-7: + + ``FE_CAN_FEC_6_7`` + + - The frontend supports FEC 6/7 + + - .. row 10 + + - .. _FE-CAN-FEC-7-8: + + ``FE_CAN_FEC_7_8`` + + - The frontend supports FEC 7/8 + + - .. row 11 + + - .. _FE-CAN-FEC-8-9: + + ``FE_CAN_FEC_8_9`` + + - The frontend supports FEC 8/9 + + - .. row 12 + + - .. _FE-CAN-FEC-AUTO: + + ``FE_CAN_FEC_AUTO`` + + - The frontend can autodetect FEC. + + - .. row 13 + + - .. _FE-CAN-QPSK: + + ``FE_CAN_QPSK`` + + - The frontend supports QPSK modulation + + - .. row 14 + + - .. _FE-CAN-QAM-16: + + ``FE_CAN_QAM_16`` + + - The frontend supports 16-QAM modulation + + - .. row 15 + + - .. _FE-CAN-QAM-32: + + ``FE_CAN_QAM_32`` + + - The frontend supports 32-QAM modulation + + - .. row 16 + + - .. _FE-CAN-QAM-64: + + ``FE_CAN_QAM_64`` + + - The frontend supports 64-QAM modulation + + - .. row 17 + + - .. _FE-CAN-QAM-128: + + ``FE_CAN_QAM_128`` + + - The frontend supports 128-QAM modulation + + - .. row 18 + + - .. _FE-CAN-QAM-256: + + ``FE_CAN_QAM_256`` + + - The frontend supports 256-QAM modulation + + - .. row 19 + + - .. _FE-CAN-QAM-AUTO: + + ``FE_CAN_QAM_AUTO`` + + - The frontend can autodetect modulation + + - .. row 20 + + - .. _FE-CAN-TRANSMISSION-MODE-AUTO: + + ``FE_CAN_TRANSMISSION_MODE_AUTO`` + + - The frontend can autodetect the transmission mode + + - .. row 21 + + - .. _FE-CAN-BANDWIDTH-AUTO: + + ``FE_CAN_BANDWIDTH_AUTO`` + + - The frontend can autodetect the bandwidth + + - .. row 22 + + - .. _FE-CAN-GUARD-INTERVAL-AUTO: + + ``FE_CAN_GUARD_INTERVAL_AUTO`` + + - The frontend can autodetect the guard interval + + - .. row 23 + + - .. _FE-CAN-HIERARCHY-AUTO: + + ``FE_CAN_HIERARCHY_AUTO`` + + - The frontend can autodetect hierarch + + - .. row 24 + + - .. _FE-CAN-8VSB: + + ``FE_CAN_8VSB`` + + - The frontend supports 8-VSB modulation + + - .. row 25 + + - .. _FE-CAN-16VSB: + + ``FE_CAN_16VSB`` + + - The frontend supports 16-VSB modulation + + - .. row 26 + + - .. _FE-HAS-EXTENDED-CAPS: + + ``FE_HAS_EXTENDED_CAPS`` + + - Currently, unused + + - .. row 27 + + - .. _FE-CAN-MULTISTREAM: + + ``FE_CAN_MULTISTREAM`` + + - The frontend supports multistream filtering + + - .. row 28 + + - .. _FE-CAN-TURBO-FEC: + + ``FE_CAN_TURBO_FEC`` + + - The frontend supports turbo FEC modulation + + - .. row 29 + + - .. _FE-CAN-2G-MODULATION: + + ``FE_CAN_2G_MODULATION`` + + - The frontend supports "2nd generation modulation" (DVB-S2/T2)> + + - .. row 30 + + - .. _FE-NEEDS-BENDING: + + ``FE_NEEDS_BENDING`` + + - Not supported anymore, don't use it + + - .. row 31 + + - .. _FE-CAN-RECOVER: + + ``FE_CAN_RECOVER`` + + - The frontend can recover from a cable unplug automatically + + - .. row 32 + + - .. _FE-CAN-MUTE-TS: + + ``FE_CAN_MUTE_TS`` + + - The frontend can stop spurious TS data output + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-get-property.rst b/Documentation/media/uapi/dvb/fe-get-property.rst new file mode 100644 index 000000000000..749daafe6b21 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-get-property.rst @@ -0,0 +1,68 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_GET_PROPERTY: + +************************************** +ioctl FE_SET_PROPERTY, FE_GET_PROPERTY +************************************** + +Name +==== + +FE_SET_PROPERTY - FE_GET_PROPERTY - FE_SET_PROPERTY sets one or more frontend properties. - FE_GET_PROPERTY returns one or more frontend properties. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, struct dtv_properties *argp ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_SET_PROPERTY, FE_GET_PROPERTY + +``argp`` + pointer to struct :ref:`dtv_properties <dtv-properties>` + + +Description +=========== + +All DVB frontend devices support the ``FE_SET_PROPERTY`` and +``FE_GET_PROPERTY`` ioctls. The supported properties and statistics +depends on the delivery system and on the device: + +- ``FE_SET_PROPERTY:`` + + - This ioctl is used to set one or more frontend properties. + + - This is the basic command to request the frontend to tune into + some frequency and to start decoding the digital TV signal. + + - This call requires read/write access to the device. + + - At return, the values are updated to reflect the actual parameters + used. + +- ``FE_GET_PROPERTY:`` + + - This ioctl is used to get properties and statistics from the + frontend. + + - No properties are changed, and statistics aren't reset. + + - This call only requires read-only access to the device. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-ber.rst b/Documentation/media/uapi/dvb/fe-read-ber.rst new file mode 100644 index 000000000000..c2b5b417f5fb --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-read-ber.rst @@ -0,0 +1,60 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_READ_BER: + +*********** +FE_READ_BER +*********** + +Name +==== + +FE_READ_BER + +Synopsis +======== + +.. cpp:function:: int ioctl(int fd, int request = FE_READ_BER, uint32_t *ber) + + +Arguments +========= + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals :ref:`FE_READ_BER` for this command. + + - .. row 3 + + - uint32_t \*ber + + - The bit error rate is stored into \*ber. + + +Description +=========== + +This ioctl call returns the bit error rate for the signal currently +received/demodulated by the front-end. For this command, read-only +access to the device is sufficient. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-signal-strength.rst b/Documentation/media/uapi/dvb/fe-read-signal-strength.rst new file mode 100644 index 000000000000..0cdee2effc97 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-read-signal-strength.rst @@ -0,0 +1,63 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_READ_SIGNAL_STRENGTH: + +*********************** +FE_READ_SIGNAL_STRENGTH +*********************** + +Name +==== + +FE_READ_SIGNAL_STRENGTH + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request = FE_READ_SIGNAL_STRENGTH, uint16_t *strength) + + +Arguments +========= + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals + :ref:`FE_READ_SIGNAL_STRENGTH` + for this command. + + - .. row 3 + + - uint16_t \*strength + + - The signal strength value is stored into \*strength. + + +Description +=========== + +This ioctl call returns the signal strength value for the signal +currently received by the front-end. For this command, read-only access +to the device is sufficient. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-snr.rst b/Documentation/media/uapi/dvb/fe-read-snr.rst new file mode 100644 index 000000000000..5394f9ae90f4 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-read-snr.rst @@ -0,0 +1,61 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_READ_SNR: + +*********** +FE_READ_SNR +*********** + +Name +==== + +FE_READ_SNR + + +Synopsis +======== + +.. cpp:function:: int ioctl(int fd, int request = FE_READ_SNR, int16_t *snr) + + +Arguments +========= + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals :ref:`FE_READ_SNR` for this command. + + - .. row 3 + + - uint16_t \*snr + + - The signal-to-noise ratio is stored into \*snr. + + +Description +=========== + +This ioctl call returns the signal-to-noise ratio for the signal +currently received by the front-end. For this command, read-only access +to the device is sufficient. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-status.rst b/Documentation/media/uapi/dvb/fe-read-status.rst new file mode 100644 index 000000000000..339955fbe133 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-read-status.rst @@ -0,0 +1,135 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_READ_STATUS: + +******************** +ioctl FE_READ_STATUS +******************** + +Name +==== + +FE_READ_STATUS - Returns status information about the front-end. This call only requires - read-only access to the device + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, unsigned int *status ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_READ_STATUS + +``status`` + pointer to a bitmask integer filled with the values defined by enum + :ref:`fe_status <fe-status>`. + + +Description +=========== + +All DVB frontend devices support the ``FE_READ_STATUS`` ioctl. It is +used to check about the locking status of the frontend after being +tuned. The ioctl takes a pointer to an integer where the status will be +written. + +NOTE: the size of status is actually sizeof(enum fe_status), with +varies according with the architecture. This needs to be fixed in the +future. + + +.. _fe-status-t: + +int fe_status +============= + +The fe_status parameter is used to indicate the current state and/or +state changes of the frontend hardware. It is produced using the enum +:ref:`fe_status <fe-status>` values on a bitmask + + +.. _fe-status: + +.. flat-table:: enum fe_status + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _FE-HAS-SIGNAL: + + ``FE_HAS_SIGNAL`` + + - The frontend has found something above the noise level + + - .. row 3 + + - .. _FE-HAS-CARRIER: + + ``FE_HAS_CARRIER`` + + - The frontend has found a DVB signal + + - .. row 4 + + - .. _FE-HAS-VITERBI: + + ``FE_HAS_VITERBI`` + + - The frontend FEC inner coding (Viterbi, LDPC or other inner code) + is stable + + - .. row 5 + + - .. _FE-HAS-SYNC: + + ``FE_HAS_SYNC`` + + - Synchronization bytes was found + + - .. row 6 + + - .. _FE-HAS-LOCK: + + ``FE_HAS_LOCK`` + + - The DVB were locked and everything is working + + - .. row 7 + + - .. _FE-TIMEDOUT: + + ``FE_TIMEDOUT`` + + - no lock within the last about 2 seconds + + - .. row 8 + + - .. _FE-REINIT: + + ``FE_REINIT`` + + - The frontend was reinitialized, application is recommended to + reset DiSEqC, tone and parameters + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst b/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst new file mode 100644 index 000000000000..5c29c058dfdc --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-read-uncorrected-blocks.rst @@ -0,0 +1,65 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_READ_UNCORRECTED_BLOCKS: + +************************** +FE_READ_UNCORRECTED_BLOCKS +************************** + +Name +==== + +FE_READ_UNCORRECTED_BLOCKS + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request =FE_READ_UNCORRECTED_BLOCKS, uint32_t *ublocks) + + +Arguments +========= + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals + :ref:`FE_READ_UNCORRECTED_BLOCKS` + for this command. + + - .. row 3 + + - uint32_t \*ublocks + + - The total number of uncorrected blocks seen by the driver so far. + + +Description +=========== + +This ioctl call returns the number of uncorrected blocks detected by the +device driver during its lifetime. For meaningful measurements, the +increment in block count during a specific time interval should be +calculated. For this command, read-only access to the device is +sufficient. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst new file mode 100644 index 000000000000..411abcf4de58 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-set-frontend-tune-mode.rst @@ -0,0 +1,55 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_SET_FRONTEND_TUNE_MODE: + +******************************* +ioctl FE_SET_FRONTEND_TUNE_MODE +******************************* + +Name +==== + +FE_SET_FRONTEND_TUNE_MODE - Allow setting tuner mode flags to the frontend. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, unsigned int flags ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_SET_FRONTEND_TUNE_MODE + +``flags`` + Valid flags: + + - 0 - normal tune mode + + - FE_TUNE_MODE_ONESHOT - When set, this flag will disable any + zigzagging or other "normal" tuning behaviour. Additionally, + there will be no automatic monitoring of the lock status, and + hence no frontend events will be generated. If a frontend device + is closed, this flag will be automatically turned off when the + device is reopened read-write. + + +Description +=========== + +Allow setting tuner mode flags to the frontend, between 0 (normal) or +FE_TUNE_MODE_ONESHOT mode + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-set-frontend.rst b/Documentation/media/uapi/dvb/fe-set-frontend.rst new file mode 100644 index 000000000000..7cb70c38d534 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-set-frontend.rst @@ -0,0 +1,79 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_SET_FRONTEND: + +*************** +FE_SET_FRONTEND +*************** + +Name +==== + +FE_SET_FRONTEND + + +Synopsis +======== + +.. cpp:function:: int ioctl(int fd, int request = FE_SET_FRONTEND, struct dvb_frontend_parameters *p) + + +Arguments +========= + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals :ref:`FE_SET_FRONTEND` for this + command. + + - .. row 3 + + - struct dvb_frontend_parameters \*p + + - Points to parameters for tuning operation. + + +Description +=========== + +This ioctl call starts a tuning operation using specified parameters. +The result of this call will be successful if the parameters were valid +and the tuning could be initiated. The result of the tuning operation in +itself, however, will arrive asynchronously as an event (see +documentation for :ref:`FE_GET_EVENT` and +FrontendEvent.) If a new :ref:`FE_SET_FRONTEND` +operation is initiated before the previous one was completed, the +previous operation will be aborted in favor of the new one. This command +requires read/write access to the device. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - Maximum supported symbol rate reached. diff --git a/Documentation/media/uapi/dvb/fe-set-tone.rst b/Documentation/media/uapi/dvb/fe-set-tone.rst new file mode 100644 index 000000000000..763b61d91004 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-set-tone.rst @@ -0,0 +1,91 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_SET_TONE: + +***************** +ioctl FE_SET_TONE +***************** + +Name +==== + +FE_SET_TONE - Sets/resets the generation of the continuous 22kHz tone. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, enum fe_sec_tone_mode *tone ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_SET_TONE + +``tone`` + pointer to enum :ref:`fe_sec_tone_mode <fe-sec-tone-mode>` + + +Description +=========== + +This ioctl is used to set the generation of the continuous 22kHz tone. +This call requires read/write permissions. + +Usually, satellite antenna subsystems require that the digital TV device +to send a 22kHz tone in order to select between high/low band on some +dual-band LNBf. It is also used to send signals to DiSEqC equipment, but +this is done using the DiSEqC ioctls. + +NOTE: if more than one device is connected to the same antenna, setting +a tone may interfere on other devices, as they may lose the capability +of selecting the band. So, it is recommended that applications would +change to SEC_TONE_OFF when the device is not used. + +.. _fe-sec-tone-mode-t: + +enum fe_sec_tone_mode +===================== + +.. _fe-sec-tone-mode: + +.. flat-table:: enum fe_sec_tone_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _SEC-TONE-ON: + + ``SEC_TONE_ON`` + + - Sends a 22kHz tone burst to the antenna + + - .. row 3 + + - .. _SEC-TONE-OFF: + + ``SEC_TONE_OFF`` + + - Don't send a 22kHz tone to the antenna (except if the + FE_DISEQC_* ioctls are called) + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-set-voltage.rst b/Documentation/media/uapi/dvb/fe-set-voltage.rst new file mode 100644 index 000000000000..517f79bdbb4b --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-set-voltage.rst @@ -0,0 +1,63 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _FE_SET_VOLTAGE: + +******************** +ioctl FE_SET_VOLTAGE +******************** + +Name +==== + +FE_SET_VOLTAGE - Allow setting the DC level sent to the antenna subsystem. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, enum fe_sec_voltage *voltage ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_SET_VOLTAGE + +``voltage`` + pointer to enum :ref:`fe_sec_voltage <fe-sec-voltage>` + + Valid values are described at enum + :ref:`fe_sec_voltage <fe-sec-voltage>`. + + +Description +=========== + +This ioctl allows to set the DC voltage level sent through the antenna +cable to 13V, 18V or off. + +Usually, a satellite antenna subsystems require that the digital TV +device to send a DC voltage to feed power to the LNBf. Depending on the +LNBf type, the polarization or the intermediate frequency (IF) of the +LNBf can controlled by the voltage level. Other devices (for example, +the ones that implement DISEqC and multipoint LNBf's don't need to +control the voltage level, provided that either 13V or 18V is sent to +power up the LNBf. + +NOTE: if more than one device is connected to the same antenna, setting +a voltage level may interfere on other devices, as they may lose the +capability of setting polarization or IF. So, on those cases, setting +the voltage to SEC_VOLTAGE_OFF while the device is not is used is +recommended. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/fe-type-t.rst b/Documentation/media/uapi/dvb/fe-type-t.rst new file mode 100644 index 000000000000..8ca762b42e4d --- /dev/null +++ b/Documentation/media/uapi/dvb/fe-type-t.rst @@ -0,0 +1,91 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _fe-type-t: + +************* +Frontend type +************* + +For historical reasons, frontend types are named by the type of +modulation used in transmission. The fontend types are given by +fe_type_t type, defined as: + + +.. _fe-type: + +.. flat-table:: Frontend types + :header-rows: 1 + :stub-columns: 0 + :widths: 3 1 4 + + + - .. row 1 + + - fe_type + + - Description + + - :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` equivalent + type + + - .. row 2 + + - .. _FE-QPSK: + + ``FE_QPSK`` + + - For DVB-S standard + + - ``SYS_DVBS`` + + - .. row 3 + + - .. _FE-QAM: + + ``FE_QAM`` + + - For DVB-C annex A standard + + - ``SYS_DVBC_ANNEX_A`` + + - .. row 4 + + - .. _FE-OFDM: + + ``FE_OFDM`` + + - For DVB-T standard + + - ``SYS_DVBT`` + + - .. row 5 + + - .. _FE-ATSC: + + ``FE_ATSC`` + + - For ATSC standard (terrestrial) or for DVB-C Annex B (cable) used + in US. + + - ``SYS_ATSC`` (terrestrial) or ``SYS_DVBC_ANNEX_B`` (cable) + + +Newer formats like DVB-S2, ISDB-T, ISDB-S and DVB-T2 are not described +at the above, as they're supported via the new +:ref:`FE_GET_PROPERTY/FE_GET_SET_PROPERTY <FE_GET_PROPERTY>` +ioctl's, using the :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` +parameter. + +In the old days, struct :ref:`dvb_frontend_info <dvb-frontend-info>` +used to contain ``fe_type_t`` field to indicate the delivery systems, +filled with either FE_QPSK, FE_QAM, FE_OFDM or FE_ATSC. While this +is still filled to keep backward compatibility, the usage of this field +is deprecated, as it can report just one delivery system, but some +devices support multiple delivery systems. Please use +:ref:`DTV_ENUM_DELSYS <DTV-ENUM-DELSYS>` instead. + +On devices that support multiple delivery systems, struct +:ref:`dvb_frontend_info <dvb-frontend-info>`::``fe_type_t`` is +filled with the currently standard, as selected by the last call to +:ref:`FE_SET_PROPERTY <FE_GET_PROPERTY>` using the +:ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` property. diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst new file mode 100644 index 000000000000..47eb29350717 --- /dev/null +++ b/Documentation/media/uapi/dvb/fe_property_parameters.rst @@ -0,0 +1,1967 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _fe_property_parameters: + +****************************** +Digital TV property parameters +****************************** + + +.. _DTV-UNDEFINED: + +DTV_UNDEFINED +============= + +Used internally. A GET/SET operation for it won't change or return +anything. + + +.. _DTV-TUNE: + +DTV_TUNE +======== + +Interpret the cache of data, build either a traditional frontend +tunerequest so we can pass validation in the ``FE_SET_FRONTEND`` ioctl. + + +.. _DTV-CLEAR: + +DTV_CLEAR +========= + +Reset a cache of data specific to the frontend here. This does not +effect hardware. + + +.. _DTV-FREQUENCY: + +DTV_FREQUENCY +============= + +Central frequency of the channel. + +Notes: + +1)For satellite delivery systems, it is measured in kHz. For the other +ones, it is measured in Hz. + +2)For ISDB-T, the channels are usually transmitted with an offset of +143kHz. E.g. a valid frequency could be 474143 kHz. The stepping is +bound to the bandwidth of the channel which is 6MHz. + +3)As in ISDB-Tsb the channel consists of only one or three segments the +frequency step is 429kHz, 3*429 respectively. As for ISDB-T the central +frequency of the channel is expected. + + +.. _DTV-MODULATION: + +DTV_MODULATION +============== + +Specifies the frontend modulation type for delivery systems that +supports more than one modulation type. The modulation can be one of the +types defined by enum :ref:`fe_modulation <fe-modulation>`. + + +.. _fe-modulation-t: + +Modulation property +------------------- + +Most of the digital TV standards currently offers more than one possible +modulation (sometimes called as "constellation" on some standards). This +enum contains the values used by the Kernel. Please note that not all +modulations are supported by a given standard. + + +.. _fe-modulation: + +.. flat-table:: enum fe_modulation + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _QPSK: + + ``QPSK`` + + - QPSK modulation + + - .. row 3 + + - .. _QAM-16: + + ``QAM_16`` + + - 16-QAM modulation + + - .. row 4 + + - .. _QAM-32: + + ``QAM_32`` + + - 32-QAM modulation + + - .. row 5 + + - .. _QAM-64: + + ``QAM_64`` + + - 64-QAM modulation + + - .. row 6 + + - .. _QAM-128: + + ``QAM_128`` + + - 128-QAM modulation + + - .. row 7 + + - .. _QAM-256: + + ``QAM_256`` + + - 256-QAM modulation + + - .. row 8 + + - .. _QAM-AUTO: + + ``QAM_AUTO`` + + - Autodetect QAM modulation + + - .. row 9 + + - .. _VSB-8: + + ``VSB_8`` + + - 8-VSB modulation + + - .. row 10 + + - .. _VSB-16: + + ``VSB_16`` + + - 16-VSB modulation + + - .. row 11 + + - .. _PSK-8: + + ``PSK_8`` + + - 8-PSK modulation + + - .. row 12 + + - .. _APSK-16: + + ``APSK_16`` + + - 16-APSK modulation + + - .. row 13 + + - .. _APSK-32: + + ``APSK_32`` + + - 32-APSK modulation + + - .. row 14 + + - .. _DQPSK: + + ``DQPSK`` + + - DQPSK modulation + + - .. row 15 + + - .. _QAM-4-NR: + + ``QAM_4_NR`` + + - 4-QAM-NR modulation + + + +.. _DTV-BANDWIDTH-HZ: + +DTV_BANDWIDTH_HZ +================ + +Bandwidth for the channel, in HZ. + +Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``, +``8000000``, ``10000000``. + +Notes: + +1) For ISDB-T it should be always 6000000Hz (6MHz) + +2) For ISDB-Tsb it can vary depending on the number of connected +segments + +3) Bandwidth doesn't apply for DVB-C transmissions, as the bandwidth for +DVB-C depends on the symbol rate + +4) Bandwidth in ISDB-T is fixed (6MHz) or can be easily derived from +other parameters (DTV_ISDBT_SB_SEGMENT_IDX, +DTV_ISDBT_SB_SEGMENT_COUNT). + +5) DVB-T supports 6, 7 and 8MHz. + +6) In addition, DVB-T2 supports 1.172, 5 and 10MHz. + + +.. _DTV-INVERSION: + +DTV_INVERSION +============= + +Specifies if the frontend should do spectral inversion or not. + + +.. _fe-spectral-inversion-t: + +enum fe_modulation: Frontend spectral inversion +----------------------------------------------- + +This parameter indicates if spectral inversion should be presumed or +not. In the automatic setting (``INVERSION_AUTO``) the hardware will try +to figure out the correct setting by itself. If the hardware doesn't +support, the DVB core will try to lock at the carrier first with +inversion off. If it fails, it will try to enable inversion. + + +.. _fe-spectral-inversion: + +.. flat-table:: enum fe_modulation + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _INVERSION-OFF: + + ``INVERSION_OFF`` + + - Don't do spectral band inversion. + + - .. row 3 + + - .. _INVERSION-ON: + + ``INVERSION_ON`` + + - Do spectral band inversion. + + - .. row 4 + + - .. _INVERSION-AUTO: + + ``INVERSION_AUTO`` + + - Autodetect spectral band inversion. + + + +.. _DTV-DISEQC-MASTER: + +DTV_DISEQC_MASTER +================= + +Currently not implemented. + + +.. _DTV-SYMBOL-RATE: + +DTV_SYMBOL_RATE +=============== + +Digital TV symbol rate, in bauds (symbols/second). Used on cable +standards. + + +.. _DTV-INNER-FEC: + +DTV_INNER_FEC +============= + +Used cable/satellite transmissions. The acceptable values are: + + +.. _fe-code-rate-t: + +enum fe_code_rate: type of the Forward Error Correction. +-------------------------------------------------------- + + +.. _fe-code-rate: + +.. flat-table:: enum fe_code_rate + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _FEC-NONE: + + ``FEC_NONE`` + + - No Forward Error Correction Code + + - .. row 3 + + - .. _FEC-AUTO: + + ``FEC_AUTO`` + + - Autodetect Error Correction Code + + - .. row 4 + + - .. _FEC-1-2: + + ``FEC_1_2`` + + - Forward Error Correction Code 1/2 + + - .. row 5 + + - .. _FEC-2-3: + + ``FEC_2_3`` + + - Forward Error Correction Code 2/3 + + - .. row 6 + + - .. _FEC-3-4: + + ``FEC_3_4`` + + - Forward Error Correction Code 3/4 + + - .. row 7 + + - .. _FEC-4-5: + + ``FEC_4_5`` + + - Forward Error Correction Code 4/5 + + - .. row 8 + + - .. _FEC-5-6: + + ``FEC_5_6`` + + - Forward Error Correction Code 5/6 + + - .. row 9 + + - .. _FEC-6-7: + + ``FEC_6_7`` + + - Forward Error Correction Code 6/7 + + - .. row 10 + + - .. _FEC-7-8: + + ``FEC_7_8`` + + - Forward Error Correction Code 7/8 + + - .. row 11 + + - .. _FEC-8-9: + + ``FEC_8_9`` + + - Forward Error Correction Code 8/9 + + - .. row 12 + + - .. _FEC-9-10: + + ``FEC_9_10`` + + - Forward Error Correction Code 9/10 + + - .. row 13 + + - .. _FEC-2-5: + + ``FEC_2_5`` + + - Forward Error Correction Code 2/5 + + - .. row 14 + + - .. _FEC-3-5: + + ``FEC_3_5`` + + - Forward Error Correction Code 3/5 + + + +.. _DTV-VOLTAGE: + +DTV_VOLTAGE +=========== + +The voltage is usually used with non-DiSEqC capable LNBs to switch the +polarzation (horizontal/vertical). When using DiSEqC epuipment this +voltage has to be switched consistently to the DiSEqC commands as +described in the DiSEqC spec. + + +.. _fe-sec-voltage: + +.. flat-table:: enum fe_sec_voltage + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _SEC-VOLTAGE-13: + + ``SEC_VOLTAGE_13`` + + - Set DC voltage level to 13V + + - .. row 3 + + - .. _SEC-VOLTAGE-18: + + ``SEC_VOLTAGE_18`` + + - Set DC voltage level to 18V + + - .. row 4 + + - .. _SEC-VOLTAGE-OFF: + + ``SEC_VOLTAGE_OFF`` + + - Don't send any voltage to the antenna + + + +.. _DTV-TONE: + +DTV_TONE +======== + +Currently not used. + + +.. _DTV-PILOT: + +DTV_PILOT +========= + +Sets DVB-S2 pilot + + +.. _fe-pilot-t: + +fe_pilot type +------------- + + +.. _fe-pilot: + +.. flat-table:: enum fe_pilot + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _PILOT-ON: + + ``PILOT_ON`` + + - Pilot tones enabled + + - .. row 3 + + - .. _PILOT-OFF: + + ``PILOT_OFF`` + + - Pilot tones disabled + + - .. row 4 + + - .. _PILOT-AUTO: + + ``PILOT_AUTO`` + + - Autodetect pilot tones + + + +.. _DTV-ROLLOFF: + +DTV_ROLLOFF +=========== + +Sets DVB-S2 rolloff + + +.. _fe-rolloff-t: + +fe_rolloff type +--------------- + + +.. _fe-rolloff: + +.. flat-table:: enum fe_rolloff + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ROLLOFF-35: + + ``ROLLOFF_35`` + + - Roloff factor: α=35% + + - .. row 3 + + - .. _ROLLOFF-20: + + ``ROLLOFF_20`` + + - Roloff factor: α=20% + + - .. row 4 + + - .. _ROLLOFF-25: + + ``ROLLOFF_25`` + + - Roloff factor: α=25% + + - .. row 5 + + - .. _ROLLOFF-AUTO: + + ``ROLLOFF_AUTO`` + + - Auto-detect the roloff factor. + + + +.. _DTV-DISEQC-SLAVE-REPLY: + +DTV_DISEQC_SLAVE_REPLY +====================== + +Currently not implemented. + + +.. _DTV-FE-CAPABILITY-COUNT: + +DTV_FE_CAPABILITY_COUNT +======================= + +Currently not implemented. + + +.. _DTV-FE-CAPABILITY: + +DTV_FE_CAPABILITY +================= + +Currently not implemented. + + +.. _DTV-DELIVERY-SYSTEM: + +DTV_DELIVERY_SYSTEM +=================== + +Specifies the type of Delivery system + + +.. _fe-delivery-system-t: + +fe_delivery_system type +----------------------- + +Possible values: + + +.. _fe-delivery-system: + +.. flat-table:: enum fe_delivery_system + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _SYS-UNDEFINED: + + ``SYS_UNDEFINED`` + + - Undefined standard. Generally, indicates an error + + - .. row 3 + + - .. _SYS-DVBC-ANNEX-A: + + ``SYS_DVBC_ANNEX_A`` + + - Cable TV: DVB-C following ITU-T J.83 Annex A spec + + - .. row 4 + + - .. _SYS-DVBC-ANNEX-B: + + ``SYS_DVBC_ANNEX_B`` + + - Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM) + + - .. row 5 + + - .. _SYS-DVBC-ANNEX-C: + + ``SYS_DVBC_ANNEX_C`` + + - Cable TV: DVB-C following ITU-T J.83 Annex C spec + + - .. row 6 + + - .. _SYS-ISDBC: + + ``SYS_ISDBC`` + + - Cable TV: ISDB-C (no drivers yet) + + - .. row 7 + + - .. _SYS-DVBT: + + ``SYS_DVBT`` + + - Terrestral TV: DVB-T + + - .. row 8 + + - .. _SYS-DVBT2: + + ``SYS_DVBT2`` + + - Terrestral TV: DVB-T2 + + - .. row 9 + + - .. _SYS-ISDBT: + + ``SYS_ISDBT`` + + - Terrestral TV: ISDB-T + + - .. row 10 + + - .. _SYS-ATSC: + + ``SYS_ATSC`` + + - Terrestral TV: ATSC + + - .. row 11 + + - .. _SYS-ATSCMH: + + ``SYS_ATSCMH`` + + - Terrestral TV (mobile): ATSC-M/H + + - .. row 12 + + - .. _SYS-DTMB: + + ``SYS_DTMB`` + + - Terrestrial TV: DTMB + + - .. row 13 + + - .. _SYS-DVBS: + + ``SYS_DVBS`` + + - Satellite TV: DVB-S + + - .. row 14 + + - .. _SYS-DVBS2: + + ``SYS_DVBS2`` + + - Satellite TV: DVB-S2 + + - .. row 15 + + - .. _SYS-TURBO: + + ``SYS_TURBO`` + + - Satellite TV: DVB-S Turbo + + - .. row 16 + + - .. _SYS-ISDBS: + + ``SYS_ISDBS`` + + - Satellite TV: ISDB-S + + - .. row 17 + + - .. _SYS-DAB: + + ``SYS_DAB`` + + - Digital audio: DAB (not fully supported) + + - .. row 18 + + - .. _SYS-DSS: + + ``SYS_DSS`` + + - Satellite TV:"DSS (not fully supported) + + - .. row 19 + + - .. _SYS-CMMB: + + ``SYS_CMMB`` + + - Terrestral TV (mobile):CMMB (not fully supported) + + - .. row 20 + + - .. _SYS-DVBH: + + ``SYS_DVBH`` + + - Terrestral TV (mobile): DVB-H (standard deprecated) + + + +.. _DTV-ISDBT-PARTIAL-RECEPTION: + +DTV_ISDBT_PARTIAL_RECEPTION +=========================== + +If ``DTV_ISDBT_SOUND_BROADCASTING`` is '0' this bit-field represents +whether the channel is in partial reception mode or not. + +If '1' ``DTV_ISDBT_LAYERA_*`` values are assigned to the center segment +and ``DTV_ISDBT_LAYERA_SEGMENT_COUNT`` has to be '1'. + +If in addition ``DTV_ISDBT_SOUND_BROADCASTING`` is '1' +``DTV_ISDBT_PARTIAL_RECEPTION`` represents whether this ISDB-Tsb channel +is consisting of one segment and layer or three segments and two layers. + +Possible values: 0, 1, -1 (AUTO) + + +.. _DTV-ISDBT-SOUND-BROADCASTING: + +DTV_ISDBT_SOUND_BROADCASTING +============================ + +This field represents whether the other DTV_ISDBT_*-parameters are +referring to an ISDB-T and an ISDB-Tsb channel. (See also +``DTV_ISDBT_PARTIAL_RECEPTION``). + +Possible values: 0, 1, -1 (AUTO) + + +.. _DTV-ISDBT-SB-SUBCHANNEL-ID: + +DTV_ISDBT_SB_SUBCHANNEL_ID +========================== + +This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. + +(Note of the author: This might not be the correct description of the +``SUBCHANNEL-ID`` in all details, but it is my understanding of the +technical background needed to program a device) + +An ISDB-Tsb channel (1 or 3 segments) can be broadcasted alone or in a +set of connected ISDB-Tsb channels. In this set of channels every +channel can be received independently. The number of connected ISDB-Tsb +segment can vary, e.g. depending on the frequency spectrum bandwidth +available. + +Example: Assume 8 ISDB-Tsb connected segments are broadcasted. The +broadcaster has several possibilities to put those channels in the air: +Assuming a normal 13-segment ISDB-T spectrum he can align the 8 segments +from position 1-8 to 5-13 or anything in between. + +The underlying layer of segments are subchannels: each segment is +consisting of several subchannels with a predefined IDs. A sub-channel +is used to help the demodulator to synchronize on the channel. + +An ISDB-T channel is always centered over all sub-channels. As for the +example above, in ISDB-Tsb it is no longer as simple as that. + +``The DTV_ISDBT_SB_SUBCHANNEL_ID`` parameter is used to give the +sub-channel ID of the segment to be demodulated. + +Possible values: 0 .. 41, -1 (AUTO) + + +.. _DTV-ISDBT-SB-SEGMENT-IDX: + +DTV_ISDBT_SB_SEGMENT_IDX +======================== + +This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. + +``DTV_ISDBT_SB_SEGMENT_IDX`` gives the index of the segment to be +demodulated for an ISDB-Tsb channel where several of them are +transmitted in the connected manner. + +Possible values: 0 .. ``DTV_ISDBT_SB_SEGMENT_COUNT`` - 1 + +Note: This value cannot be determined by an automatic channel search. + + +.. _DTV-ISDBT-SB-SEGMENT-COUNT: + +DTV_ISDBT_SB_SEGMENT_COUNT +========================== + +This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. + +``DTV_ISDBT_SB_SEGMENT_COUNT`` gives the total count of connected +ISDB-Tsb channels. + +Possible values: 1 .. 13 + +Note: This value cannot be determined by an automatic channel search. + + +.. _isdb-hierq-layers: + +DTV-ISDBT-LAYER[A-C] parameters +=============================== + +ISDB-T channels can be coded hierarchically. As opposed to DVB-T in +ISDB-T hierarchical layers can be decoded simultaneously. For that +reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders. + +ISDB-T has 3 hierarchical layers which each can use a part of the +available segments. The total number of segments over all layers has to +13 in ISDB-T. + +There are 3 parameter sets, for Layers A, B and C. + + +.. _DTV-ISDBT-LAYER-ENABLED: + +DTV_ISDBT_LAYER_ENABLED +----------------------- + +Hierarchical reception in ISDB-T is achieved by enabling or disabling +layers in the decoding process. Setting all bits of +``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to +be demodulated. This is the default. + +If the channel is in the partial reception mode +(``DTV_ISDBT_PARTIAL_RECEPTION`` = 1) the central segment can be decoded +independently of the other 12 segments. In that mode layer A has to have +a ``SEGMENT_COUNT`` of 1. + +In ISDB-Tsb only layer A is used, it can be 1 or 3 in ISDB-Tsb according +to ``DTV_ISDBT_PARTIAL_RECEPTION``. ``SEGMENT_COUNT`` must be filled +accordingly. + +Only the values of the first 3 bits are used. Other bits will be silently ignored: + +``DTV_ISDBT_LAYER_ENABLED`` bit 0: layer A enabled + +``DTV_ISDBT_LAYER_ENABLED`` bit 1: layer B enabled + +``DTV_ISDBT_LAYER_ENABLED`` bit 2: layer C enabled + +``DTV_ISDBT_LAYER_ENABLED`` bits 3-31: unused + + +.. _DTV-ISDBT-LAYER-FEC: + +DTV_ISDBT_LAYER[A-C]_FEC +------------------------ + +Possible values: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``, +``FEC_5_6``, ``FEC_7_8`` + + +.. _DTV-ISDBT-LAYER-MODULATION: + +DTV_ISDBT_LAYER[A-C]_MODULATION +------------------------------- + +Possible values: ``QAM_AUTO``, QP\ ``SK, QAM_16``, ``QAM_64``, ``DQPSK`` + +Note: If layer C is ``DQPSK`` layer B has to be ``DQPSK``. If layer B is +``DQPSK`` and ``DTV_ISDBT_PARTIAL_RECEPTION``\ =0 layer has to be +``DQPSK``. + + +.. _DTV-ISDBT-LAYER-SEGMENT-COUNT: + +DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT +---------------------------------- + +Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO) + +Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and +``DTV_ISDBT_PARTIAL_RECEPTION`` and ``LAYER[A-C]_SEGMENT_COUNT`` + + +.. _isdbt-layer_seg-cnt-table: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - PR + + - SB + + - Layer A width + + - Layer B width + + - Layer C width + + - total width + + - .. row 2 + + - 0 + + - 0 + + - 1 .. 13 + + - 1 .. 13 + + - 1 .. 13 + + - 13 + + - .. row 3 + + - 1 + + - 0 + + - 1 + + - 1 .. 13 + + - 1 .. 13 + + - 13 + + - .. row 4 + + - 0 + + - 1 + + - 1 + + - 0 + + - 0 + + - 1 + + - .. row 5 + + - 1 + + - 1 + + - 1 + + - 2 + + - 0 + + - 13 + + + +.. _DTV-ISDBT-LAYER-TIME-INTERLEAVING: + +DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING +-------------------------------------- + +Valid values: 0, 1, 2, 4, -1 (AUTO) + +when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid. + +Note: The real time interleaving length depends on the mode (fft-size). +The values here are referring to what can be found in the +TMCC-structure, as shown in the table below. + + +.. _isdbt-layer-interleaving-table: + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING`` + + - Mode 1 (2K FFT) + + - Mode 2 (4K FFT) + + - Mode 3 (8K FFT) + + - .. row 2 + + - 0 + + - 0 + + - 0 + + - 0 + + - .. row 3 + + - 1 + + - 4 + + - 2 + + - 1 + + - .. row 4 + + - 2 + + - 8 + + - 4 + + - 2 + + - .. row 5 + + - 4 + + - 16 + + - 8 + + - 4 + + + +.. _DTV-ATSCMH-FIC-VER: + +DTV_ATSCMH_FIC_VER +------------------ + +Version number of the FIC (Fast Information Channel) signaling data. + +FIC is used for relaying information to allow rapid service acquisition +by the receiver. + +Possible values: 0, 1, 2, 3, ..., 30, 31 + + +.. _DTV-ATSCMH-PARADE-ID: + +DTV_ATSCMH_PARADE_ID +-------------------- + +Parade identification number + +A parade is a collection of up to eight MH groups, conveying one or two +ensembles. + +Possible values: 0, 1, 2, 3, ..., 126, 127 + + +.. _DTV-ATSCMH-NOG: + +DTV_ATSCMH_NOG +-------------- + +Number of MH groups per MH subframe for a designated parade. + +Possible values: 1, 2, 3, 4, 5, 6, 7, 8 + + +.. _DTV-ATSCMH-TNOG: + +DTV_ATSCMH_TNOG +--------------- + +Total number of MH groups including all MH groups belonging to all MH +parades in one MH subframe. + +Possible values: 0, 1, 2, 3, ..., 30, 31 + + +.. _DTV-ATSCMH-SGN: + +DTV_ATSCMH_SGN +-------------- + +Start group number. + +Possible values: 0, 1, 2, 3, ..., 14, 15 + + +.. _DTV-ATSCMH-PRC: + +DTV_ATSCMH_PRC +-------------- + +Parade repetition cycle. + +Possible values: 1, 2, 3, 4, 5, 6, 7, 8 + + +.. _DTV-ATSCMH-RS-FRAME-MODE: + +DTV_ATSCMH_RS_FRAME_MODE +------------------------ + +Reed Solomon (RS) frame mode. + +Possible values are: + + +.. _atscmh-rs-frame-mode: + +.. flat-table:: enum atscmh_rs_frame_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-RSFRAME-PRI-ONLY: + + ``ATSCMH_RSFRAME_PRI_ONLY`` + + - Single Frame: There is only a primary RS Frame for all Group + Regions. + + - .. row 3 + + - .. _ATSCMH-RSFRAME-PRI-SEC: + + ``ATSCMH_RSFRAME_PRI_SEC`` + + - Dual Frame: There are two separate RS Frames: Primary RS Frame for + Group Region A and B and Secondary RS Frame for Group Region C and + D. + + + +.. _DTV-ATSCMH-RS-FRAME-ENSEMBLE: + +DTV_ATSCMH_RS_FRAME_ENSEMBLE +---------------------------- + +Reed Solomon(RS) frame ensemble. + +Possible values are: + + +.. _atscmh-rs-frame-ensemble: + +.. flat-table:: enum atscmh_rs_frame_ensemble + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-RSFRAME-ENS-PRI: + + ``ATSCMH_RSFRAME_ENS_PRI`` + + - Primary Ensemble. + + - .. row 3 + + - .. _ATSCMH-RSFRAME-ENS-SEC: + + ``AATSCMH_RSFRAME_PRI_SEC`` + + - Secondary Ensemble. + + - .. row 4 + + - .. _ATSCMH-RSFRAME-RES: + + ``AATSCMH_RSFRAME_RES`` + + - Reserved. Shouldn't be used. + + + +.. _DTV-ATSCMH-RS-CODE-MODE-PRI: + +DTV_ATSCMH_RS_CODE_MODE_PRI +--------------------------- + +Reed Solomon (RS) code mode (primary). + +Possible values are: + + +.. _atscmh-rs-code-mode: + +.. flat-table:: enum atscmh_rs_code_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-RSCODE-211-187: + + ``ATSCMH_RSCODE_211_187`` + + - Reed Solomon code (211,187). + + - .. row 3 + + - .. _ATSCMH-RSCODE-223-187: + + ``ATSCMH_RSCODE_223_187`` + + - Reed Solomon code (223,187). + + - .. row 4 + + - .. _ATSCMH-RSCODE-235-187: + + ``ATSCMH_RSCODE_235_187`` + + - Reed Solomon code (235,187). + + - .. row 5 + + - .. _ATSCMH-RSCODE-RES: + + ``ATSCMH_RSCODE_RES`` + + - Reserved. Shouldn't be used. + + + +.. _DTV-ATSCMH-RS-CODE-MODE-SEC: + +DTV_ATSCMH_RS_CODE_MODE_SEC +--------------------------- + +Reed Solomon (RS) code mode (secondary). + +Possible values are the same as documented on enum +:ref:`atscmh_rs_code_mode <atscmh-rs-code-mode>`: + + +.. _DTV-ATSCMH-SCCC-BLOCK-MODE: + +DTV_ATSCMH_SCCC_BLOCK_MODE +-------------------------- + +Series Concatenated Convolutional Code Block Mode. + +Possible values are: + + +.. _atscmh-sccc-block-mode: + +.. flat-table:: enum atscmh_scc_block_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-SCCC-BLK-SEP: + + ``ATSCMH_SCCC_BLK_SEP`` + + - Separate SCCC: the SCCC outer code mode shall be set independently + for each Group Region (A, B, C, D) + + - .. row 3 + + - .. _ATSCMH-SCCC-BLK-COMB: + + ``ATSCMH_SCCC_BLK_COMB`` + + - Combined SCCC: all four Regions shall have the same SCCC outer + code mode. + + - .. row 4 + + - .. _ATSCMH-SCCC-BLK-RES: + + ``ATSCMH_SCCC_BLK_RES`` + + - Reserved. Shouldn't be used. + + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-A: + +DTV_ATSCMH_SCCC_CODE_MODE_A +--------------------------- + +Series Concatenated Convolutional Code Rate. + +Possible values are: + + +.. _atscmh-sccc-code-mode: + +.. flat-table:: enum atscmh_sccc_code_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _ATSCMH-SCCC-CODE-HLF: + + ``ATSCMH_SCCC_CODE_HLF`` + + - The outer code rate of a SCCC Block is 1/2 rate. + + - .. row 3 + + - .. _ATSCMH-SCCC-CODE-QTR: + + ``ATSCMH_SCCC_CODE_QTR`` + + - The outer code rate of a SCCC Block is 1/4 rate. + + - .. row 4 + + - .. _ATSCMH-SCCC-CODE-RES: + + ``ATSCMH_SCCC_CODE_RES`` + + - to be documented. + + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-B: + +DTV_ATSCMH_SCCC_CODE_MODE_B +--------------------------- + +Series Concatenated Convolutional Code Rate. + +Possible values are the same as documented on enum +:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`. + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-C: + +DTV_ATSCMH_SCCC_CODE_MODE_C +--------------------------- + +Series Concatenated Convolutional Code Rate. + +Possible values are the same as documented on enum +:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`. + + +.. _DTV-ATSCMH-SCCC-CODE-MODE-D: + +DTV_ATSCMH_SCCC_CODE_MODE_D +--------------------------- + +Series Concatenated Convolutional Code Rate. + +Possible values are the same as documented on enum +:ref:`atscmh_sccc_code_mode <atscmh-sccc-code-mode>`. + + +.. _DTV-API-VERSION: + +DTV_API_VERSION +=============== + +Returns the major/minor version of the DVB API + + +.. _DTV-CODE-RATE-HP: + +DTV_CODE_RATE_HP +================ + +Used on terrestrial transmissions. The acceptable values are the ones +described at :ref:`fe_transmit_mode_t <fe-transmit-mode-t>`. + + +.. _DTV-CODE-RATE-LP: + +DTV_CODE_RATE_LP +================ + +Used on terrestrial transmissions. The acceptable values are the ones +described at :ref:`fe_transmit_mode_t <fe-transmit-mode-t>`. + + +.. _DTV-GUARD-INTERVAL: + +DTV_GUARD_INTERVAL +================== + +Possible values are: + + +.. _fe-guard-interval-t: + +Modulation guard interval +------------------------- + + +.. _fe-guard-interval: + +.. flat-table:: enum fe_guard_interval + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _GUARD-INTERVAL-AUTO: + + ``GUARD_INTERVAL_AUTO`` + + - Autodetect the guard interval + + - .. row 3 + + - .. _GUARD-INTERVAL-1-128: + + ``GUARD_INTERVAL_1_128`` + + - Guard interval 1/128 + + - .. row 4 + + - .. _GUARD-INTERVAL-1-32: + + ``GUARD_INTERVAL_1_32`` + + - Guard interval 1/32 + + - .. row 5 + + - .. _GUARD-INTERVAL-1-16: + + ``GUARD_INTERVAL_1_16`` + + - Guard interval 1/16 + + - .. row 6 + + - .. _GUARD-INTERVAL-1-8: + + ``GUARD_INTERVAL_1_8`` + + - Guard interval 1/8 + + - .. row 7 + + - .. _GUARD-INTERVAL-1-4: + + ``GUARD_INTERVAL_1_4`` + + - Guard interval 1/4 + + - .. row 8 + + - .. _GUARD-INTERVAL-19-128: + + ``GUARD_INTERVAL_19_128`` + + - Guard interval 19/128 + + - .. row 9 + + - .. _GUARD-INTERVAL-19-256: + + ``GUARD_INTERVAL_19_256`` + + - Guard interval 19/256 + + - .. row 10 + + - .. _GUARD-INTERVAL-PN420: + + ``GUARD_INTERVAL_PN420`` + + - PN length 420 (1/4) + + - .. row 11 + + - .. _GUARD-INTERVAL-PN595: + + ``GUARD_INTERVAL_PN595`` + + - PN length 595 (1/6) + + - .. row 12 + + - .. _GUARD-INTERVAL-PN945: + + ``GUARD_INTERVAL_PN945`` + + - PN length 945 (1/9) + + +Notes: + +1) If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the +hardware will try to find the correct guard interval (if capable) and +will use TMCC to fill in the missing parameters. + +2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at +present + +3) DTMB specifies PN420, PN595 and PN945. + + +.. _DTV-TRANSMISSION-MODE: + +DTV_TRANSMISSION_MODE +===================== + +Specifies the number of carriers used by the standard. This is used only +on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB + + +.. _fe-transmit-mode-t: + +enum fe_transmit_mode: Number of carriers per channel +----------------------------------------------------- + + +.. _fe-transmit-mode: + +.. flat-table:: enum fe_transmit_mode + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _TRANSMISSION-MODE-AUTO: + + ``TRANSMISSION_MODE_AUTO`` + + - Autodetect transmission mode. The hardware will try to find the + correct FFT-size (if capable) to fill in the missing parameters. + + - .. row 3 + + - .. _TRANSMISSION-MODE-1K: + + ``TRANSMISSION_MODE_1K`` + + - Transmission mode 1K + + - .. row 4 + + - .. _TRANSMISSION-MODE-2K: + + ``TRANSMISSION_MODE_2K`` + + - Transmission mode 2K + + - .. row 5 + + - .. _TRANSMISSION-MODE-8K: + + ``TRANSMISSION_MODE_8K`` + + - Transmission mode 8K + + - .. row 6 + + - .. _TRANSMISSION-MODE-4K: + + ``TRANSMISSION_MODE_4K`` + + - Transmission mode 4K + + - .. row 7 + + - .. _TRANSMISSION-MODE-16K: + + ``TRANSMISSION_MODE_16K`` + + - Transmission mode 16K + + - .. row 8 + + - .. _TRANSMISSION-MODE-32K: + + ``TRANSMISSION_MODE_32K`` + + - Transmission mode 32K + + - .. row 9 + + - .. _TRANSMISSION-MODE-C1: + + ``TRANSMISSION_MODE_C1`` + + - Single Carrier (C=1) transmission mode (DTMB) + + - .. row 10 + + - .. _TRANSMISSION-MODE-C3780: + + ``TRANSMISSION_MODE_C3780`` + + - Multi Carrier (C=3780) transmission mode (DTMB) + + +Notes: + +1) ISDB-T supports three carrier/symbol-size: 8K, 4K, 2K. It is called +'mode' in the standard: Mode 1 is 2K, mode 2 is 4K, mode 3 is 8K + +2) If ``DTV_TRANSMISSION_MODE`` is set the ``TRANSMISSION_MODE_AUTO`` +the hardware will try to find the correct FFT-size (if capable) and will +use TMCC to fill in the missing parameters. + +3) DVB-T specifies 2K and 8K as valid sizes. + +4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K. + +5) DTMB specifies C1 and C3780. + + +.. _DTV-HIERARCHY: + +DTV_HIERARCHY +============= + +Frontend hierarchy + + +.. _fe-hierarchy-t: + +Frontend hierarchy +------------------ + + +.. _fe-hierarchy: + +.. flat-table:: enum fe_hierarchy + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _HIERARCHY-NONE: + + ``HIERARCHY_NONE`` + + - No hierarchy + + - .. row 3 + + - .. _HIERARCHY-AUTO: + + ``HIERARCHY_AUTO`` + + - Autodetect hierarchy (if supported) + + - .. row 4 + + - .. _HIERARCHY-1: + + ``HIERARCHY_1`` + + - Hierarchy 1 + + - .. row 5 + + - .. _HIERARCHY-2: + + ``HIERARCHY_2`` + + - Hierarchy 2 + + - .. row 6 + + - .. _HIERARCHY-4: + + ``HIERARCHY_4`` + + - Hierarchy 4 + + + +.. _DTV-STREAM-ID: + +DTV_STREAM_ID +============= + +DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on +a single transport stream. This property enables the DVB driver to +handle substream filtering, when supported by the hardware. By default, +substream filtering is disabled. + +For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255. + +For ISDB, the valid substream id range is from 1 to 65535. + +To disable it, you should use the special macro NO_STREAM_ID_FILTER. + +Note: any value outside the id range also disables filtering. + + +.. _DTV-DVBT2-PLP-ID-LEGACY: + +DTV_DVBT2_PLP_ID_LEGACY +======================= + +Obsolete, replaced with DTV_STREAM_ID. + + +.. _DTV-ENUM-DELSYS: + +DTV_ENUM_DELSYS +=============== + +A Multi standard frontend needs to advertise the delivery systems +provided. Applications need to enumerate the provided delivery systems, +before using any other operation with the frontend. Prior to it's +introduction, FE_GET_INFO was used to determine a frontend type. A +frontend which provides more than a single delivery system, +FE_GET_INFO doesn't help much. Applications which intends to use a +multistandard frontend must enumerate the delivery systems associated +with it, rather than trying to use FE_GET_INFO. In the case of a +legacy frontend, the result is just the same as with FE_GET_INFO, but +in a more structured format + + +.. _DTV-INTERLEAVING: + +DTV_INTERLEAVING +================ + +Time interleaving to be used. Currently, used only on DTMB. + + +.. _fe-interleaving: + +.. flat-table:: enum fe_interleaving + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - .. _INTERLEAVING-NONE: + + ``INTERLEAVING_NONE`` + + - No interleaving. + + - .. row 3 + + - .. _INTERLEAVING-AUTO: + + ``INTERLEAVING_AUTO`` + + - Auto-detect interleaving. + + - .. row 4 + + - .. _INTERLEAVING-240: + + ``INTERLEAVING_240`` + + - Interleaving of 240 symbols. + + - .. row 5 + + - .. _INTERLEAVING-720: + + ``INTERLEAVING_720`` + + - Interleaving of 720 symbols. + + + +.. _DTV-LNA: + +DTV_LNA +======= + +Low-noise amplifier. + +Hardware might offer controllable LNA which can be set manually using +that parameter. Usually LNA could be found only from terrestrial devices +if at all. + +Possible values: 0, 1, LNA_AUTO + +0, LNA off + +1, LNA on + +use the special macro LNA_AUTO to set LNA auto diff --git a/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst b/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst new file mode 100644 index 000000000000..bf2328627af5 --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend-property-cable-systems.rst @@ -0,0 +1,75 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend-property-cable-systems: + +***************************************** +Properties used on cable delivery systems +***************************************** + + +.. _dvbc-params: + +DVB-C delivery system +===================== + +The DVB-C Annex-A is the widely used cable standard. Transmission uses +QAM modulation. + +The DVB-C Annex-C is optimized for 6MHz, and is used in Japan. It +supports a subset of the Annex A modulation types, and a roll-off of +0.13, instead of 0.15 + +The following parameters are valid for DVB-C Annex A/C: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_MODULATION <DTV-MODULATION>` + +- :ref:`DTV_INVERSION <DTV-INVERSION>` + +- :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>` + +- :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` + +- :ref:`DTV_LNA <DTV-LNA>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. + + +.. _dvbc-annex-b-params: + +DVB-C Annex B delivery system +============================= + +The DVB-C Annex-B is only used on a few Countries like the United +States. + +The following parameters are valid for DVB-C Annex B: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_MODULATION <DTV-MODULATION>` + +- :ref:`DTV_INVERSION <DTV-INVERSION>` + +- :ref:`DTV_LNA <DTV-LNA>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. diff --git a/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst b/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst new file mode 100644 index 000000000000..1f40399c68ff --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend-property-satellite-systems.rst @@ -0,0 +1,103 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend-property-satellite-systems: + +********************************************* +Properties used on satellite delivery systems +********************************************* + + +.. _dvbs-params: + +DVB-S delivery system +===================== + +The following parameters are valid for DVB-S: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_INVERSION <DTV-INVERSION>` + +- :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>` + +- :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` + +- :ref:`DTV_VOLTAGE <DTV-VOLTAGE>` + +- :ref:`DTV_TONE <DTV-TONE>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. + +Future implementations might add those two missing parameters: + +- :ref:`DTV_DISEQC_MASTER <DTV-DISEQC-MASTER>` + +- :ref:`DTV_DISEQC_SLAVE_REPLY <DTV-DISEQC-SLAVE-REPLY>` + + +.. _dvbs2-params: + +DVB-S2 delivery system +====================== + +In addition to all parameters valid for DVB-S, DVB-S2 supports the +following parameters: + +- :ref:`DTV_MODULATION <DTV-MODULATION>` + +- :ref:`DTV_PILOT <DTV-PILOT>` + +- :ref:`DTV_ROLLOFF <DTV-ROLLOFF>` + +- :ref:`DTV_STREAM_ID <DTV-STREAM-ID>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. + + +.. _turbo-params: + +Turbo code delivery system +========================== + +In addition to all parameters valid for DVB-S, turbo code supports the +following parameters: + +- :ref:`DTV_MODULATION <DTV-MODULATION>` + + +.. _isdbs-params: + +ISDB-S delivery system +====================== + +The following parameters are valid for ISDB-S: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_INVERSION <DTV-INVERSION>` + +- :ref:`DTV_SYMBOL_RATE <DTV-SYMBOL-RATE>` + +- :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` + +- :ref:`DTV_VOLTAGE <DTV-VOLTAGE>` + +- :ref:`DTV_STREAM_ID <DTV-STREAM-ID>` diff --git a/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst b/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst new file mode 100644 index 000000000000..dbc717cad9ee --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend-property-terrestrial-systems.rst @@ -0,0 +1,294 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend-property-terrestrial-systems: + +*********************************************** +Properties used on terrestrial delivery systems +*********************************************** + + +.. _dvbt-params: + +DVB-T delivery system +===================== + +The following parameters are valid for DVB-T: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_MODULATION <DTV-MODULATION>` + +- :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>` + +- :ref:`DTV_INVERSION <DTV-INVERSION>` + +- :ref:`DTV_CODE_RATE_HP <DTV-CODE-RATE-HP>` + +- :ref:`DTV_CODE_RATE_LP <DTV-CODE-RATE-LP>` + +- :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>` + +- :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>` + +- :ref:`DTV_HIERARCHY <DTV-HIERARCHY>` + +- :ref:`DTV_LNA <DTV-LNA>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. + + +.. _dvbt2-params: + +DVB-T2 delivery system +====================== + +DVB-T2 support is currently in the early stages of development, so +expect that this section maygrow and become more detailed with time. + +The following parameters are valid for DVB-T2: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_MODULATION <DTV-MODULATION>` + +- :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>` + +- :ref:`DTV_INVERSION <DTV-INVERSION>` + +- :ref:`DTV_CODE_RATE_HP <DTV-CODE-RATE-HP>` + +- :ref:`DTV_CODE_RATE_LP <DTV-CODE-RATE-LP>` + +- :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>` + +- :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>` + +- :ref:`DTV_HIERARCHY <DTV-HIERARCHY>` + +- :ref:`DTV_STREAM_ID <DTV-STREAM-ID>` + +- :ref:`DTV_LNA <DTV-LNA>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. + + +.. _isdbt: + +ISDB-T delivery system +====================== + +This ISDB-T/ISDB-Tsb API extension should reflect all information needed +to tune any ISDB-T/ISDB-Tsb hardware. Of course it is possible that some +very sophisticated devices won't need certain parameters to tune. + +The information given here should help application writers to know how +to handle ISDB-T and ISDB-Tsb hardware using the Linux DVB-API. + +The details given here about ISDB-T and ISDB-Tsb are just enough to +basically show the dependencies between the needed parameter values, but +surely some information is left out. For more detailed information see +the following documents: + +ARIB STD-B31 - "Transmission System for Digital Terrestrial Television +Broadcasting" and + +ARIB TR-B14 - "Operational Guidelines for Digital Terrestrial Television +Broadcasting". + +In order to understand the ISDB specific parameters, one has to have +some knowledge the channel structure in ISDB-T and ISDB-Tsb. I.e. it has +to be known to the reader that an ISDB-T channel consists of 13 +segments, that it can have up to 3 layer sharing those segments, and +things like that. + +The following parameters are valid for ISDB-T: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>` + +- :ref:`DTV_INVERSION <DTV-INVERSION>` + +- :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>` + +- :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>` + +- :ref:`DTV_ISDBT_LAYER_ENABLED <DTV-ISDBT-LAYER-ENABLED>` + +- :ref:`DTV_ISDBT_PARTIAL_RECEPTION <DTV-ISDBT-PARTIAL-RECEPTION>` + +- :ref:`DTV_ISDBT_SOUND_BROADCASTING <DTV-ISDBT-SOUND-BROADCASTING>` + +- :ref:`DTV_ISDBT_SB_SUBCHANNEL_ID <DTV-ISDBT-SB-SUBCHANNEL-ID>` + +- :ref:`DTV_ISDBT_SB_SEGMENT_IDX <DTV-ISDBT-SB-SEGMENT-IDX>` + +- :ref:`DTV_ISDBT_SB_SEGMENT_COUNT <DTV-ISDBT-SB-SEGMENT-COUNT>` + +- :ref:`DTV_ISDBT_LAYERA_FEC <DTV-ISDBT-LAYER-FEC>` + +- :ref:`DTV_ISDBT_LAYERA_MODULATION <DTV-ISDBT-LAYER-MODULATION>` + +- :ref:`DTV_ISDBT_LAYERA_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>` + +- :ref:`DTV_ISDBT_LAYERA_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>` + +- :ref:`DTV_ISDBT_LAYERB_FEC <DTV-ISDBT-LAYER-FEC>` + +- :ref:`DTV_ISDBT_LAYERB_MODULATION <DTV-ISDBT-LAYER-MODULATION>` + +- :ref:`DTV_ISDBT_LAYERB_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>` + +- :ref:`DTV_ISDBT_LAYERB_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>` + +- :ref:`DTV_ISDBT_LAYERC_FEC <DTV-ISDBT-LAYER-FEC>` + +- :ref:`DTV_ISDBT_LAYERC_MODULATION <DTV-ISDBT-LAYER-MODULATION>` + +- :ref:`DTV_ISDBT_LAYERC_SEGMENT_COUNT <DTV-ISDBT-LAYER-SEGMENT-COUNT>` + +- :ref:`DTV_ISDBT_LAYERC_TIME_INTERLEAVING <DTV-ISDBT-LAYER-TIME-INTERLEAVING>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. + + +.. _atsc-params: + +ATSC delivery system +==================== + +The following parameters are valid for ATSC: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_MODULATION <DTV-MODULATION>` + +- :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. + + +.. _atscmh-params: + +ATSC-MH delivery system +======================= + +The following parameters are valid for ATSC-MH: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>` + +- :ref:`DTV_ATSCMH_FIC_VER <DTV-ATSCMH-FIC-VER>` + +- :ref:`DTV_ATSCMH_PARADE_ID <DTV-ATSCMH-PARADE-ID>` + +- :ref:`DTV_ATSCMH_NOG <DTV-ATSCMH-NOG>` + +- :ref:`DTV_ATSCMH_TNOG <DTV-ATSCMH-TNOG>` + +- :ref:`DTV_ATSCMH_SGN <DTV-ATSCMH-SGN>` + +- :ref:`DTV_ATSCMH_PRC <DTV-ATSCMH-PRC>` + +- :ref:`DTV_ATSCMH_RS_FRAME_MODE <DTV-ATSCMH-RS-FRAME-MODE>` + +- :ref:`DTV_ATSCMH_RS_FRAME_ENSEMBLE <DTV-ATSCMH-RS-FRAME-ENSEMBLE>` + +- :ref:`DTV_ATSCMH_RS_CODE_MODE_PRI <DTV-ATSCMH-RS-CODE-MODE-PRI>` + +- :ref:`DTV_ATSCMH_RS_CODE_MODE_SEC <DTV-ATSCMH-RS-CODE-MODE-SEC>` + +- :ref:`DTV_ATSCMH_SCCC_BLOCK_MODE <DTV-ATSCMH-SCCC-BLOCK-MODE>` + +- :ref:`DTV_ATSCMH_SCCC_CODE_MODE_A <DTV-ATSCMH-SCCC-CODE-MODE-A>` + +- :ref:`DTV_ATSCMH_SCCC_CODE_MODE_B <DTV-ATSCMH-SCCC-CODE-MODE-B>` + +- :ref:`DTV_ATSCMH_SCCC_CODE_MODE_C <DTV-ATSCMH-SCCC-CODE-MODE-C>` + +- :ref:`DTV_ATSCMH_SCCC_CODE_MODE_D <DTV-ATSCMH-SCCC-CODE-MODE-D>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. + + +.. _dtmb-params: + +DTMB delivery system +==================== + +The following parameters are valid for DTMB: + +- :ref:`DTV_API_VERSION <DTV-API-VERSION>` + +- :ref:`DTV_DELIVERY_SYSTEM <DTV-DELIVERY-SYSTEM>` + +- :ref:`DTV_TUNE <DTV-TUNE>` + +- :ref:`DTV_CLEAR <DTV-CLEAR>` + +- :ref:`DTV_FREQUENCY <DTV-FREQUENCY>` + +- :ref:`DTV_MODULATION <DTV-MODULATION>` + +- :ref:`DTV_BANDWIDTH_HZ <DTV-BANDWIDTH-HZ>` + +- :ref:`DTV_INVERSION <DTV-INVERSION>` + +- :ref:`DTV_INNER_FEC <DTV-INNER-FEC>` + +- :ref:`DTV_GUARD_INTERVAL <DTV-GUARD-INTERVAL>` + +- :ref:`DTV_TRANSMISSION_MODE <DTV-TRANSMISSION-MODE>` + +- :ref:`DTV_INTERLEAVING <DTV-INTERLEAVING>` + +- :ref:`DTV_LNA <DTV-LNA>` + +In addition, the :ref:`DTV QoS statistics <frontend-stat-properties>` +are also valid. diff --git a/Documentation/media/uapi/dvb/frontend-stat-properties.rst b/Documentation/media/uapi/dvb/frontend-stat-properties.rst new file mode 100644 index 000000000000..0fc4aaa304ff --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend-stat-properties.rst @@ -0,0 +1,245 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend-stat-properties: + +****************************** +Frontend statistics indicators +****************************** + +The values are returned via ``dtv_property.stat``. If the property is +supported, ``dtv_property.stat.len`` is bigger than zero. + +For most delivery systems, ``dtv_property.stat.len`` will be 1 if the +stats is supported, and the properties will return a single value for +each parameter. + +It should be noted, however, that new OFDM delivery systems like ISDB +can use different modulation types for each group of carriers. On such +standards, up to 3 groups of statistics can be provided, and +``dtv_property.stat.len`` is updated to reflect the "global" metrics, +plus one metric per each carrier group (called "layer" on ISDB). + +So, in order to be consistent with other delivery systems, the first +value at :ref:`dtv_property.stat.dtv_stats <dtv-stats>` array refers +to the global metric. The other elements of the array represent each +layer, starting from layer A(index 1), layer B (index 2) and so on. + +The number of filled elements are stored at ``dtv_property.stat.len``. + +Each element of the ``dtv_property.stat.dtv_stats`` array consists on +two elements: + +- ``svalue`` or ``uvalue``, where ``svalue`` is for signed values of + the measure (dB measures) and ``uvalue`` is for unsigned values + (counters, relative scale) + +- ``scale`` - Scale for the value. It can be: + + - ``FE_SCALE_NOT_AVAILABLE`` - The parameter is supported by the + frontend, but it was not possible to collect it (could be a + transitory or permanent condition) + + - ``FE_SCALE_DECIBEL`` - parameter is a signed value, measured in + 1/1000 dB + + - ``FE_SCALE_RELATIVE`` - parameter is a unsigned value, where 0 + means 0% and 65535 means 100%. + + - ``FE_SCALE_COUNTER`` - parameter is a unsigned value that counts + the occurrence of an event, like bit error, block error, or lapsed + time. + + +.. _DTV-STAT-SIGNAL-STRENGTH: + +DTV_STAT_SIGNAL_STRENGTH +======================== + +Indicates the signal strength level at the analog part of the tuner or +of the demod. + +Possible scales for this metric are: + +- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the + measurement was not complete yet. + +- ``FE_SCALE_DECIBEL`` - signal strength is in 0.001 dBm units, power + measured in miliwatts. This value is generally negative. + +- ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100% + measurement for power (actually, 0 to 65535). + + +.. _DTV-STAT-CNR: + +DTV_STAT_CNR +============ + +Indicates the Signal to Noise ratio for the main carrier. + +Possible scales for this metric are: + +- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the + measurement was not complete yet. + +- ``FE_SCALE_DECIBEL`` - Signal/Noise ratio is in 0.001 dB units. + +- ``FE_SCALE_RELATIVE`` - The frontend provides a 0% to 100% + measurement for Signal/Noise (actually, 0 to 65535). + + +.. _DTV-STAT-PRE-ERROR-BIT-COUNT: + +DTV_STAT_PRE_ERROR_BIT_COUNT +============================ + +Measures the number of bit errors before the forward error correction +(FEC) on the inner coding block (before Viterbi, LDPC or other inner +code). + +This measure is taken during the same interval as +``DTV_STAT_PRE_TOTAL_BIT_COUNT``. + +In order to get the BER (Bit Error Rate) measurement, it should be +divided by +:ref:`DTV_STAT_PRE_TOTAL_BIT_COUNT <DTV-STAT-PRE-TOTAL-BIT-COUNT>`. + +This measurement is monotonically increased, as the frontend gets more +bit count measurements. The frontend may reset it when a +channel/transponder is tuned. + +Possible scales for this metric are: + +- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the + measurement was not complete yet. + +- ``FE_SCALE_COUNTER`` - Number of error bits counted before the inner + coding. + + +.. _DTV-STAT-PRE-TOTAL-BIT-COUNT: + +DTV_STAT_PRE_TOTAL_BIT_COUNT +============================ + +Measures the amount of bits received before the inner code block, during +the same period as +:ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>` +measurement was taken. + +It should be noted that this measurement can be smaller than the total +amount of bits on the transport stream, as the frontend may need to +manually restart the measurement, losing some data between each +measurement interval. + +This measurement is monotonically increased, as the frontend gets more +bit count measurements. The frontend may reset it when a +channel/transponder is tuned. + +Possible scales for this metric are: + +- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the + measurement was not complete yet. + +- ``FE_SCALE_COUNTER`` - Number of bits counted while measuring + :ref:`DTV_STAT_PRE_ERROR_BIT_COUNT <DTV-STAT-PRE-ERROR-BIT-COUNT>`. + + +.. _DTV-STAT-POST-ERROR-BIT-COUNT: + +DTV_STAT_POST_ERROR_BIT_COUNT +============================= + +Measures the number of bit errors after the forward error correction +(FEC) done by inner code block (after Viterbi, LDPC or other inner +code). + +This measure is taken during the same interval as +``DTV_STAT_POST_TOTAL_BIT_COUNT``. + +In order to get the BER (Bit Error Rate) measurement, it should be +divided by +:ref:`DTV_STAT_POST_TOTAL_BIT_COUNT <DTV-STAT-POST-TOTAL-BIT-COUNT>`. + +This measurement is monotonically increased, as the frontend gets more +bit count measurements. The frontend may reset it when a +channel/transponder is tuned. + +Possible scales for this metric are: + +- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the + measurement was not complete yet. + +- ``FE_SCALE_COUNTER`` - Number of error bits counted after the inner + coding. + + +.. _DTV-STAT-POST-TOTAL-BIT-COUNT: + +DTV_STAT_POST_TOTAL_BIT_COUNT +============================= + +Measures the amount of bits received after the inner coding, during the +same period as +:ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>` +measurement was taken. + +It should be noted that this measurement can be smaller than the total +amount of bits on the transport stream, as the frontend may need to +manually restart the measurement, losing some data between each +measurement interval. + +This measurement is monotonically increased, as the frontend gets more +bit count measurements. The frontend may reset it when a +channel/transponder is tuned. + +Possible scales for this metric are: + +- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the + measurement was not complete yet. + +- ``FE_SCALE_COUNTER`` - Number of bits counted while measuring + :ref:`DTV_STAT_POST_ERROR_BIT_COUNT <DTV-STAT-POST-ERROR-BIT-COUNT>`. + + +.. _DTV-STAT-ERROR-BLOCK-COUNT: + +DTV_STAT_ERROR_BLOCK_COUNT +========================== + +Measures the number of block errors after the outer forward error +correction coding (after Reed-Solomon or other outer code). + +This measurement is monotonically increased, as the frontend gets more +bit count measurements. The frontend may reset it when a +channel/transponder is tuned. + +Possible scales for this metric are: + +- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the + measurement was not complete yet. + +- ``FE_SCALE_COUNTER`` - Number of error blocks counted after the outer + coding. + + +.. _DTV-STAT-TOTAL-BLOCK-COUNT: + +DTV-STAT_TOTAL_BLOCK_COUNT +========================== + +Measures the total number of blocks received during the same period as +:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>` +measurement was taken. + +It can be used to calculate the PER indicator, by dividing +:ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>` by +:ref:`DTV-STAT-TOTAL-BLOCK-COUNT`. + +Possible scales for this metric are: + +- ``FE_SCALE_NOT_AVAILABLE`` - it failed to measure it, or the + measurement was not complete yet. + +- ``FE_SCALE_COUNTER`` - Number of blocks counted while measuring + :ref:`DTV_STAT_ERROR_BLOCK_COUNT <DTV-STAT-ERROR-BLOCK-COUNT>`. diff --git a/Documentation/media/uapi/dvb/frontend.rst b/Documentation/media/uapi/dvb/frontend.rst new file mode 100644 index 000000000000..8c7e502bff1f --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend.rst @@ -0,0 +1,51 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb_frontend: + +################ +DVB Frontend API +################ +The DVB frontend API was designed to support three types of delivery +systems: + +- Terrestrial systems: DVB-T, DVB-T2, ATSC, ATSC M/H, ISDB-T, DVB-H, + DTMB, CMMB + +- Cable systems: DVB-C Annex A/C, ClearQAM (DVB-C Annex B), ISDB-C + +- Satellite systems: DVB-S, DVB-S2, DVB Turbo, ISDB-S, DSS + +The DVB frontend controls several sub-devices including: + +- Tuner + +- Digital TV demodulator + +- Low noise amplifier (LNA) + +- Satellite Equipment Control (SEC) hardware (only for Satellite). + +The frontend can be accessed through ``/dev/dvb/adapter?/frontend?``. +Data types and ioctl definitions can be accessed by including +``linux/dvb/frontend.h`` in your application. + +NOTE: Transmission via the internet (DVB-IP) is not yet handled by this +API but a future extension is possible. + +On Satellite systems, the API support for the Satellite Equipment +Control (SEC) allows to power control and to send/receive signals to +control the antenna subsystem, selecting the polarization and choosing +the Intermediate Frequency IF) of the Low Noise Block Converter Feed +Horn (LNBf). It supports the DiSEqC and V-SEC protocols. The DiSEqC +(digital SEC) specification is available at +`Eutelsat <http://www.eutelsat.com/satellites/4_5_5.html>`__. + + +.. toctree:: + :maxdepth: 1 + + query-dvb-frontend-info + dvb-fe-read-status + dvbproperty + frontend_fcalls + frontend_legacy_dvbv3_api diff --git a/Documentation/media/uapi/dvb/frontend_f_close.rst b/Documentation/media/uapi/dvb/frontend_f_close.rst new file mode 100644 index 000000000000..5cce9262084c --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend_f_close.rst @@ -0,0 +1,48 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend_f_close: + +******************** +DVB frontend close() +******************** + +Name +==== + +fe-close - Close a frontend device + + +Synopsis +======== + +.. code-block:: c + + #include <unistd.h> + + +.. cpp:function:: int close( int fd ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <func-open>`. + + +Description +=========== + +This system call closes a previously opened front-end device. After +closing a front-end device, its corresponding hardware might be powered +down automatically. + + +Return Value +============ + +The function returns 0 on success, -1 on failure and the ``errno`` is +set appropriately. Possible error codes: + +EBADF + ``fd`` is not a valid open file descriptor. diff --git a/Documentation/media/uapi/dvb/frontend_f_open.rst b/Documentation/media/uapi/dvb/frontend_f_open.rst new file mode 100644 index 000000000000..e0c55345f524 --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend_f_open.rst @@ -0,0 +1,102 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend_f_open: + +******************* +DVB frontend open() +******************* + +Name +==== + +fe-open - Open a frontend device + + +Synopsis +======== + +.. code-block:: c + + #include <fcntl.h> + + +.. cpp:function:: int open( const char *device_name, int flags ) + + +Arguments +========= + +``device_name`` + Device to be opened. + +``flags`` + Open flags. Access can either be ``O_RDWR`` or ``O_RDONLY``. + + Multiple opens are allowed with ``O_RDONLY``. In this mode, only + query and read ioctls are allowed. + + Only one open is allowed in ``O_RDWR``. In this mode, all ioctls are + allowed. + + When the ``O_NONBLOCK`` flag is given, the system calls may return + ``EAGAIN`` error code when no data is available or when the device + driver is temporarily busy. + + Other flags have no effect. + + +Description +=========== + +This system call opens a named frontend device +(``/dev/dvb/adapter?/frontend?``) for subsequent use. Usually the first +thing to do after a successful open is to find out the frontend type +with :ref:`FE_GET_INFO`. + +The device can be opened in read-only mode, which only allows monitoring +of device status and statistics, or read/write mode, which allows any +kind of use (e.g. performing tuning operations.) + +In a system with multiple front-ends, it is usually the case that +multiple devices cannot be open in read/write mode simultaneously. As +long as a front-end device is opened in read/write mode, other open() +calls in read/write mode will either fail or block, depending on whether +non-blocking or blocking mode was specified. A front-end device opened +in blocking mode can later be put into non-blocking mode (and vice +versa) using the F_SETFL command of the fcntl system call. This is a +standard system call, documented in the Linux manual page for fcntl. +When an open() call has succeeded, the device will be ready for use in +the specified mode. This implies that the corresponding hardware is +powered up, and that other front-ends may have been powered down to make +that possible. + + +Return Value +============ + +On success :ref:`open() <frontend_f_open>` returns the new file descriptor. +On error, -1 is returned, and the ``errno`` variable is set appropriately. + +Possible error codes are: + +EACCES + The caller has no permission to access the device. + +EBUSY + The the device driver is already in use. + +ENXIO + No device corresponding to this device special file exists. + +ENOMEM + Not enough kernel memory was available to complete the request. + +EMFILE + The process already has the maximum number of files open. + +ENFILE + The limit on the total number of files open on the system has been + reached. + +ENODEV + The device got removed. diff --git a/Documentation/media/uapi/dvb/frontend_fcalls.rst b/Documentation/media/uapi/dvb/frontend_fcalls.rst new file mode 100644 index 000000000000..b03f9cab6d5a --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend_fcalls.rst @@ -0,0 +1,24 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend_fcalls: + +####################### +Frontend Function Calls +####################### + +.. toctree:: + :maxdepth: 1 + + frontend_f_open + frontend_f_close + fe-get-info + fe-read-status + fe-get-property + fe-diseqc-reset-overload + fe-diseqc-send-master-cmd + fe-diseqc-recv-slave-reply + fe-diseqc-send-burst + fe-set-tone + fe-set-voltage + fe-enable-high-lnb-voltage + fe-set-frontend-tune-mode diff --git a/Documentation/media/uapi/dvb/frontend_h.rst b/Documentation/media/uapi/dvb/frontend_h.rst new file mode 100644 index 000000000000..15fca04d1c32 --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend_h.rst @@ -0,0 +1,9 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend_h: + +************************ +DVB Frontend Header File +************************ + +.. kernel-include:: $BUILDDIR/frontend.h.rst diff --git a/Documentation/media/uapi/dvb/frontend_legacy_api.rst b/Documentation/media/uapi/dvb/frontend_legacy_api.rst new file mode 100644 index 000000000000..759833d3eaa4 --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend_legacy_api.rst @@ -0,0 +1,38 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend_legacy_types: + +Frontend Legacy Data Types +========================== + + +.. toctree:: + :maxdepth: 1 + + fe-type-t + fe-bandwidth-t + dvb-frontend-parameters + dvb-frontend-event + + +.. _frontend_legacy_fcalls: + +Frontend Legacy Function Calls +============================== + +Those functions are defined at DVB version 3. The support is kept in the +kernel due to compatibility issues only. Their usage is strongly not +recommended + + +.. toctree:: + :maxdepth: 1 + + fe-read-ber + fe-read-snr + fe-read-signal-strength + fe-read-uncorrected-blocks + fe-set-frontend + fe-get-frontend + fe-get-event + fe-dishnetwork-send-legacy-cmd diff --git a/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst b/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst new file mode 100644 index 000000000000..7d4a091b7d7f --- /dev/null +++ b/Documentation/media/uapi/dvb/frontend_legacy_dvbv3_api.rst @@ -0,0 +1,18 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _frontend_legacy_dvbv3_api: + +**************************************** +DVB Frontend legacy API (a. k. a. DVBv3) +**************************************** + +The usage of this API is deprecated, as it doesn't support all digital +TV standards, doesn't provide good statistics measurements and provides +incomplete information. This is kept only to support legacy +applications. + + +.. toctree:: + :maxdepth: 1 + + frontend_legacy_api diff --git a/Documentation/media/uapi/dvb/intro.rst b/Documentation/media/uapi/dvb/intro.rst new file mode 100644 index 000000000000..b61081d00a9f --- /dev/null +++ b/Documentation/media/uapi/dvb/intro.rst @@ -0,0 +1,172 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb_introdution: + +************ +Introduction +************ + + +.. _requisites: + +What you need to know +===================== + +The reader of this document is required to have some knowledge in the +area of digital video broadcasting (DVB) and should be familiar with +part I of the MPEG2 specification ISO/IEC 13818 (aka ITU-T H.222), i.e +you should know what a program/transport stream (PS/TS) is and what is +meant by a packetized elementary stream (PES) or an I-frame. + +Various DVB standards documents are available from http://www.dvb.org +and/or http://www.etsi.org. + +It is also necessary to know how to access unix/linux devices and how to +use ioctl calls. This also includes the knowledge of C or C++. + + +.. _history: + +History +======= + +The first API for DVB cards we used at Convergence in late 1999 was an +extension of the Video4Linux API which was primarily developed for frame +grabber cards. As such it was not really well suited to be used for DVB +cards and their new features like recording MPEG streams and filtering +several section and PES data streams at the same time. + +In early 2000, we were approached by Nokia with a proposal for a new +standard Linux DVB API. As a commitment to the development of terminals +based on open standards, Nokia and Convergence made it available to all +Linux developers and published it on https://linuxtv.org in September +2000. Convergence is the maintainer of the Linux DVB API. Together with +the LinuxTV community (i.e. you, the reader of this document), the Linux +DVB API will be constantly reviewed and improved. With the Linux driver +for the Siemens/Hauppauge DVB PCI card Convergence provides a first +implementation of the Linux DVB API. + + +.. _overview: + +Overview +======== + + +.. _stb_components: + +.. figure:: intro_files/dvbstb.* + :alt: dvbstb.pdf / dvbstb.png + :align: center + + Components of a DVB card/STB + +A DVB PCI card or DVB set-top-box (STB) usually consists of the +following main hardware components: + +- Frontend consisting of tuner and DVB demodulator + + Here the raw signal reaches the DVB hardware from a satellite dish or + antenna or directly from cable. The frontend down-converts and + demodulates this signal into an MPEG transport stream (TS). In case + of a satellite frontend, this includes a facility for satellite + equipment control (SEC), which allows control of LNB polarization, + multi feed switches or dish rotors. + +- Conditional Access (CA) hardware like CI adapters and smartcard slots + + The complete TS is passed through the CA hardware. Programs to which + the user has access (controlled by the smart card) are decoded in + real time and re-inserted into the TS. + +- Demultiplexer which filters the incoming DVB stream + + The demultiplexer splits the TS into its components like audio and + video streams. Besides usually several of such audio and video + streams it also contains data streams with information about the + programs offered in this or other streams of the same provider. + +- MPEG2 audio and video decoder + + The main targets of the demultiplexer are the MPEG2 audio and video + decoders. After decoding they pass on the uncompressed audio and + video to the computer screen or (through a PAL/NTSC encoder) to a TV + set. + +:ref:`stb_components` shows a crude schematic of the control and data +flow between those components. + +On a DVB PCI card not all of these have to be present since some +functionality can be provided by the main CPU of the PC (e.g. MPEG +picture and sound decoding) or is not needed (e.g. for data-only uses +like “internet over satellite”). Also not every card or STB provides +conditional access hardware. + + +.. _dvb_devices: + +Linux DVB Devices +================= + +The Linux DVB API lets you control these hardware components through +currently six Unix-style character devices for video, audio, frontend, +demux, CA and IP-over-DVB networking. The video and audio devices +control the MPEG2 decoder hardware, the frontend device the tuner and +the DVB demodulator. The demux device gives you control over the PES and +section filters of the hardware. If the hardware does not support +filtering these filters can be implemented in software. Finally, the CA +device controls all the conditional access capabilities of the hardware. +It can depend on the individual security requirements of the platform, +if and how many of the CA functions are made available to the +application through this device. + +All devices can be found in the ``/dev`` tree under ``/dev/dvb``. The +individual devices are called: + +- ``/dev/dvb/adapterN/audioM``, + +- ``/dev/dvb/adapterN/videoM``, + +- ``/dev/dvb/adapterN/frontendM``, + +- ``/dev/dvb/adapterN/netM``, + +- ``/dev/dvb/adapterN/demuxM``, + +- ``/dev/dvb/adapterN/dvrM``, + +- ``/dev/dvb/adapterN/caM``, + +where N enumerates the DVB PCI cards in a system starting from 0, and M +enumerates the devices of each type within each adapter, starting +from 0, too. We will omit the “ ``/dev/dvb/adapterN/``\ ” in the further +discussion of these devices. + +More details about the data structures and function calls of all the +devices are described in the following chapters. + + +.. _include_files: + +API include files +================= + +For each of the DVB devices a corresponding include file exists. The DVB +API include files should be included in application sources with a +partial path like: + + +.. code-block:: c + + #include <linux/dvb/ca.h> + + #include <linux/dvb/dmx.h> + + #include <linux/dvb/frontend.h> + + #include <linux/dvb/net.h> + + +To enable applications to support different API version, an additional +include file ``linux/dvb/version.h`` exists, which defines the constant +``DVB_API_VERSION``. This document describes ``DVB_API_VERSION 5.10``. diff --git a/Documentation/media/uapi/dvb/intro_files/dvbstb.pdf b/Documentation/media/uapi/dvb/intro_files/dvbstb.pdf Binary files differnew file mode 100644 index 000000000000..0fa75d90c3eb --- /dev/null +++ b/Documentation/media/uapi/dvb/intro_files/dvbstb.pdf diff --git a/Documentation/media/uapi/dvb/intro_files/dvbstb.png b/Documentation/media/uapi/dvb/intro_files/dvbstb.png Binary files differnew file mode 100644 index 000000000000..9b8f372e7afd --- /dev/null +++ b/Documentation/media/uapi/dvb/intro_files/dvbstb.png diff --git a/Documentation/media/uapi/dvb/legacy_dvb_apis.rst b/Documentation/media/uapi/dvb/legacy_dvb_apis.rst new file mode 100644 index 000000000000..2957f5a988b0 --- /dev/null +++ b/Documentation/media/uapi/dvb/legacy_dvb_apis.rst @@ -0,0 +1,20 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _legacy_dvb_apis: + +******************* +DVB Deprecated APIs +******************* + +The APIs described here are kept only for historical reasons. There's +just one driver for a very legacy hardware that uses this API. No modern +drivers should use it. Instead, audio and video should be using the V4L2 +and ALSA APIs, and the pipelines should be set using the Media +Controller API + + +.. toctree:: + :maxdepth: 1 + + video + audio diff --git a/Documentation/media/uapi/dvb/net-add-if.rst b/Documentation/media/uapi/dvb/net-add-if.rst new file mode 100644 index 000000000000..2b990d0e0fe1 --- /dev/null +++ b/Documentation/media/uapi/dvb/net-add-if.rst @@ -0,0 +1,91 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _NET_ADD_IF: + +**************** +ioctl NET_ADD_IF +**************** + +Name +==== + +NET_ADD_IF - Creates a new network interface for a given Packet ID. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, struct dvb_net_if *net_if ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_SET_TONE + +``net_if`` + pointer to struct :ref:`dvb_net_if <dvb-net-if>` + + +Description +=========== + +The NET_ADD_IF ioctl system call selects the Packet ID (PID) that +contains a TCP/IP traffic, the type of encapsulation to be used (MPE or +ULE) and the interface number for the new interface to be created. When +the system call successfully returns, a new virtual network interface is +created. + +The struct :ref:`dvb_net_if <dvb-net-if>`::ifnum field will be +filled with the number of the created interface. + + +.. _dvb-net-if-t: + +struct dvb_net_if description +============================= + +.. _dvb-net-if: + +.. flat-table:: struct dvb_net_if + :header-rows: 1 + :stub-columns: 0 + + + - .. row 1 + + - ID + + - Description + + - .. row 2 + + - pid + + - Packet ID (PID) of the MPEG-TS that contains data + + - .. row 3 + + - ifnum + + - number of the DVB interface. + + - .. row 4 + + - feedtype + + - Encapsulation type of the feed. It can be: + ``DVB_NET_FEEDTYPE_MPE`` for MPE encoding or + ``DVB_NET_FEEDTYPE_ULE`` for ULE encoding. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/net-get-if.rst b/Documentation/media/uapi/dvb/net-get-if.rst new file mode 100644 index 000000000000..92b884143ccd --- /dev/null +++ b/Documentation/media/uapi/dvb/net-get-if.rst @@ -0,0 +1,50 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _NET_GET_IF: + +**************** +ioctl NET_GET_IF +**************** + +Name +==== + +NET_GET_IF - Read the configuration data of an interface created via - :ref:`NET_ADD_IF <net>`. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, struct dvb_net_if *net_if ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_SET_TONE + +``net_if`` + pointer to struct :ref:`dvb_net_if <dvb-net-if>` + + +Description +=========== + +The NET_GET_IF ioctl uses the interface number given by the struct +:ref:`dvb_net_if <dvb-net-if>`::ifnum field and fills the content of +struct :ref:`dvb_net_if <dvb-net-if>` with the packet ID and +encapsulation type used on such interface. If the interface was not +created yet with :ref:`NET_ADD_IF <net>`, it will return -1 and fill +the ``errno`` with ``EINVAL`` error code. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/net-remove-if.rst b/Documentation/media/uapi/dvb/net-remove-if.rst new file mode 100644 index 000000000000..d374c1d63d06 --- /dev/null +++ b/Documentation/media/uapi/dvb/net-remove-if.rst @@ -0,0 +1,46 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _NET_REMOVE_IF: + +******************* +ioctl NET_REMOVE_IF +******************* + +Name +==== + +NET_REMOVE_IF - Removes a network interface. + + +Synopsis +======== + +.. cpp:function:: int ioctl( int fd, int request, int ifnum ) + + +Arguments +========= + +``fd`` + File descriptor returned by :ref:`open() <frontend_f_open>`. + +``request`` + FE_SET_TONE + +``net_if`` + number of the interface to be removed + + +Description +=========== + +The NET_REMOVE_IF ioctl deletes an interface previously created via +:ref:`NET_ADD_IF <net>`. + + +Return Value +============ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/net.rst b/Documentation/media/uapi/dvb/net.rst new file mode 100644 index 000000000000..eca42dd53261 --- /dev/null +++ b/Documentation/media/uapi/dvb/net.rst @@ -0,0 +1,40 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _net: + +############### +DVB Network API +############### +The DVB net device controls the mapping of data packages that are part +of a transport stream to be mapped into a virtual network interface, +visible through the standard Linux network protocol stack. + +Currently, two encapsulations are supported: + +- `Multi Protocol Encapsulation (MPE) <http://en.wikipedia.org/wiki/Multiprotocol_Encapsulation>`__ + +- `Ultra Lightweight Encapsulation (ULE) <http://en.wikipedia.org/wiki/Unidirectional_Lightweight_Encapsulation>`__ + +In order to create the Linux virtual network interfaces, an application +needs to tell to the Kernel what are the PIDs and the encapsulation +types that are present on the transport stream. This is done through +``/dev/dvb/adapter?/net?`` device node. The data will be available via +virtual ``dvb?_?`` network interfaces, and will be controlled/routed via +the standard ip tools (like ip, route, netstat, ifconfig, etc). + +Data types and and ioctl definitions are defined via ``linux/dvb/net.h`` +header. + + +.. _net_fcalls: + +###################### +DVB net Function Calls +###################### + +.. toctree:: + :maxdepth: 1 + + net-add-if + net-remove-if + net-get-if diff --git a/Documentation/media/uapi/dvb/net_h.rst b/Documentation/media/uapi/dvb/net_h.rst new file mode 100644 index 000000000000..7bcf5ba9d1eb --- /dev/null +++ b/Documentation/media/uapi/dvb/net_h.rst @@ -0,0 +1,9 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _net_h: + +*********************** +DVB Network Header File +*********************** + +.. kernel-include:: $BUILDDIR/net.h.rst diff --git a/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst b/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst new file mode 100644 index 000000000000..81cd9b92a36c --- /dev/null +++ b/Documentation/media/uapi/dvb/query-dvb-frontend-info.rst @@ -0,0 +1,13 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _query-dvb-frontend-info: + +***************************** +Querying frontend information +***************************** + +Usually, the first thing to do when the frontend is opened is to check +the frontend capabilities. This is done using +:ref:`FE_GET_INFO`. This ioctl will enumerate the +DVB API version and other characteristics about the frontend, and can be +opened either in read only or read/write mode. diff --git a/Documentation/media/uapi/dvb/video-clear-buffer.rst b/Documentation/media/uapi/dvb/video-clear-buffer.rst new file mode 100644 index 000000000000..7c85aa06f013 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-clear-buffer.rst @@ -0,0 +1,54 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_CLEAR_BUFFER: + +================== +VIDEO_CLEAR_BUFFER +================== + +Name +---- + +VIDEO_CLEAR_BUFFER + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_CLEAR_BUFFER) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_CLEAR_BUFFER for this command. + + +Description +----------- + +This ioctl call clears all video buffers in the driver and in the +decoder hardware. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-command.rst b/Documentation/media/uapi/dvb/video-command.rst new file mode 100644 index 000000000000..b1634f722cbd --- /dev/null +++ b/Documentation/media/uapi/dvb/video-command.rst @@ -0,0 +1,66 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_COMMAND: + +============= +VIDEO_COMMAND +============= + +Name +---- + +VIDEO_COMMAND + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = VIDEO_COMMAND, struct video_command *cmd) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_COMMAND for this command. + + - .. row 3 + + - struct video_command \*cmd + + - Commands the decoder. + + +Description +----------- + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders +this ioctl has been replaced by the +:ref:`VIDIOC_DECODER_CMD` ioctl. + +This ioctl commands the decoder. The ``video_command`` struct is a +subset of the ``v4l2_decoder_cmd`` struct, so refer to the +:ref:`VIDIOC_DECODER_CMD` documentation for +more information. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-continue.rst b/Documentation/media/uapi/dvb/video-continue.rst new file mode 100644 index 000000000000..c5acc094986f --- /dev/null +++ b/Documentation/media/uapi/dvb/video-continue.rst @@ -0,0 +1,57 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_CONTINUE: + +============== +VIDEO_CONTINUE +============== + +Name +---- + +VIDEO_CONTINUE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_CONTINUE) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_CONTINUE for this command. + + +Description +----------- + +This ioctl is for DVB devices only. To control a V4L2 decoder use the +V4L2 :ref:`VIDIOC_DECODER_CMD` instead. + +This ioctl call restarts decoding and playing processes of the video +stream which was played before a call to VIDEO_FREEZE was made. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-fast-forward.rst b/Documentation/media/uapi/dvb/video-fast-forward.rst new file mode 100644 index 000000000000..db338e9f5379 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-fast-forward.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_FAST_FORWARD: + +================== +VIDEO_FAST_FORWARD +================== + +Name +---- + +VIDEO_FAST_FORWARD + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_FAST_FORWARD, int nFrames) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_FAST_FORWARD for this command. + + - .. row 3 + + - int nFrames + + - The number of frames to skip. + + +Description +----------- + +This ioctl call asks the Video Device to skip decoding of N number of +I-frames. This call can only be used if VIDEO_SOURCE_MEMORY is +selected. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EPERM`` + + - Mode VIDEO_SOURCE_MEMORY not selected. diff --git a/Documentation/media/uapi/dvb/video-fclose.rst b/Documentation/media/uapi/dvb/video-fclose.rst new file mode 100644 index 000000000000..ebeaade0c351 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-fclose.rst @@ -0,0 +1,54 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _video_fclose: + +================= +dvb video close() +================= + +Name +---- + +dvb video close() + + +Synopsis +-------- + +.. cpp:function:: int close(int fd) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + +Description +----------- + +This system call closes a previously opened video device. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EBADF`` + + - fd is not a valid open file descriptor. diff --git a/Documentation/media/uapi/dvb/video-fopen.rst b/Documentation/media/uapi/dvb/video-fopen.rst new file mode 100644 index 000000000000..9e5471557b83 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-fopen.rst @@ -0,0 +1,112 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _video_fopen: + +================ +dvb video open() +================ + +Name +---- + +dvb video open() + + +Synopsis +-------- + +.. cpp:function:: int open(const char *deviceName, int flags) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - const char \*deviceName + + - Name of specific video device. + + - .. row 2 + + - int flags + + - A bit-wise OR of the following flags: + + - .. row 3 + + - + - O_RDONLY read-only access + + - .. row 4 + + - + - O_RDWR read/write access + + - .. row 5 + + - + - O_NONBLOCK open in non-blocking mode + + - .. row 6 + + - + - (blocking mode is the default) + + +Description +----------- + +This system call opens a named video device (e.g. +/dev/dvb/adapter0/video0) for subsequent use. + +When an open() call has succeeded, the device will be ready for use. The +significance of blocking or non-blocking mode is described in the +documentation for functions where there is a difference. It does not +affect the semantics of the open() call itself. A device opened in +blocking mode can later be put into non-blocking mode (and vice versa) +using the F_SETFL command of the fcntl system call. This is a standard +system call, documented in the Linux manual page for fcntl. Only one +user can open the Video Device in O_RDWR mode. All other attempts to +open the device in this mode will fail, and an error-code will be +returned. If the Video Device is opened in O_RDONLY mode, the only +ioctl call that can be used is VIDEO_GET_STATUS. All other call will +return an error code. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``ENODEV`` + + - Device driver not loaded/available. + + - .. row 2 + + - ``EINTERNAL`` + + - Internal error. + + - .. row 3 + + - ``EBUSY`` + + - Device or resource busy. + + - .. row 4 + + - ``EINVAL`` + + - Invalid argument. diff --git a/Documentation/media/uapi/dvb/video-freeze.rst b/Documentation/media/uapi/dvb/video-freeze.rst new file mode 100644 index 000000000000..d3d0dc31281a --- /dev/null +++ b/Documentation/media/uapi/dvb/video-freeze.rst @@ -0,0 +1,61 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_FREEZE: + +============ +VIDEO_FREEZE +============ + +Name +---- + +VIDEO_FREEZE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_FREEZE) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_FREEZE for this command. + + +Description +----------- + +This ioctl is for DVB devices only. To control a V4L2 decoder use the +V4L2 :ref:`VIDIOC_DECODER_CMD` instead. + +This ioctl call suspends the live video stream being played. Decoding +and playing are frozen. It is then possible to restart the decoding and +playing process of the video stream using the VIDEO_CONTINUE command. +If VIDEO_SOURCE_MEMORY is selected in the ioctl call +VIDEO_SELECT_SOURCE, the DVB subsystem will not decode any more data +until the ioctl call VIDEO_CONTINUE or VIDEO_PLAY is performed. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-fwrite.rst b/Documentation/media/uapi/dvb/video-fwrite.rst new file mode 100644 index 000000000000..045038f4181e --- /dev/null +++ b/Documentation/media/uapi/dvb/video-fwrite.rst @@ -0,0 +1,82 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _video_fwrite: + +================= +dvb video write() +================= + +Name +---- + +dvb video write() + + +Synopsis +-------- + +.. cpp:function:: size_t write(int fd, const void *buf, size_t count) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - void \*buf + + - Pointer to the buffer containing the PES data. + + - .. row 3 + + - size_t count + + - Size of buf. + + +Description +----------- + +This system call can only be used if VIDEO_SOURCE_MEMORY is selected +in the ioctl call VIDEO_SELECT_SOURCE. The data provided shall be in +PES format, unless the capability allows other formats. If O_NONBLOCK +is not specified the function will block until buffer space is +available. The amount of data to be transferred is implied by count. + + +Return Value +------------ + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EPERM`` + + - Mode VIDEO_SOURCE_MEMORY not selected. + + - .. row 2 + + - ``ENOMEM`` + + - Attempted to write more data than the internal buffer can hold. + + - .. row 3 + + - ``EBADF`` + + - fd is not a valid open file descriptor. diff --git a/Documentation/media/uapi/dvb/video-get-capabilities.rst b/Documentation/media/uapi/dvb/video-get-capabilities.rst new file mode 100644 index 000000000000..94cbbba478a8 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-get-capabilities.rst @@ -0,0 +1,61 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_GET_CAPABILITIES: + +====================== +VIDEO_GET_CAPABILITIES +====================== + +Name +---- + +VIDEO_GET_CAPABILITIES + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_GET_CAPABILITIES, unsigned int *cap) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_GET_CAPABILITIES for this command. + + - .. row 3 + + - unsigned int \*cap + + - Pointer to a location where to store the capability information. + + +Description +----------- + +This ioctl call asks the video device about its decoding capabilities. +On success it returns and integer which has bits set according to the +defines in section ??. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-get-event.rst b/Documentation/media/uapi/dvb/video-get-event.rst new file mode 100644 index 000000000000..a1484a226518 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-get-event.rst @@ -0,0 +1,88 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_GET_EVENT: + +=============== +VIDEO_GET_EVENT +=============== + +Name +---- + +VIDEO_GET_EVENT + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_GET_EVENT, struct video_event *ev) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_GET_EVENT for this command. + + - .. row 3 + + - struct video_event \*ev + + - Points to the location where the event, if any, is to be stored. + + +Description +----------- + +This ioctl is for DVB devices only. To get events from a V4L2 decoder +use the V4L2 :ref:`VIDIOC_DQEVENT` ioctl instead. + +This ioctl call returns an event of type video_event if available. If +an event is not available, the behavior depends on whether the device is +in blocking or non-blocking mode. In the latter case, the call fails +immediately with errno set to ``EWOULDBLOCK``. In the former case, the call +blocks until an event becomes available. The standard Linux poll() +and/or select() system calls can be used with the device file descriptor +to watch for new events. For select(), the file descriptor should be +included in the exceptfds argument, and for poll(), POLLPRI should be +specified as the wake-up condition. Read-only permissions are sufficient +for this ioctl call. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EWOULDBLOCK`` + + - There is no event pending, and the device is in non-blocking mode. + + - .. row 2 + + - ``EOVERFLOW`` + + - Overflow in event queue - one or more events were lost. diff --git a/Documentation/media/uapi/dvb/video-get-frame-count.rst b/Documentation/media/uapi/dvb/video-get-frame-count.rst new file mode 100644 index 000000000000..4ff100c2ee95 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-get-frame-count.rst @@ -0,0 +1,65 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_GET_FRAME_COUNT: + +===================== +VIDEO_GET_FRAME_COUNT +===================== + +Name +---- + +VIDEO_GET_FRAME_COUNT + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = VIDEO_GET_FRAME_COUNT, __u64 *pts) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_GET_FRAME_COUNT for this command. + + - .. row 3 + + - __u64 \*pts + + - Returns the number of frames displayed since the decoder was + started. + + +Description +----------- + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders +this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_FRAME`` +control. + +This ioctl call asks the Video Device to return the number of displayed +frames since the decoder was started. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-get-frame-rate.rst b/Documentation/media/uapi/dvb/video-get-frame-rate.rst new file mode 100644 index 000000000000..131def962305 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-get-frame-rate.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_GET_FRAME_RATE: + +==================== +VIDEO_GET_FRAME_RATE +==================== + +Name +---- + +VIDEO_GET_FRAME_RATE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = VIDEO_GET_FRAME_RATE, unsigned int *rate) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_GET_FRAME_RATE for this command. + + - .. row 3 + + - unsigned int \*rate + + - Returns the framerate in number of frames per 1000 seconds. + + +Description +----------- + +This ioctl call asks the Video Device to return the current framerate. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-get-navi.rst b/Documentation/media/uapi/dvb/video-get-navi.rst new file mode 100644 index 000000000000..6c3034fe5fa2 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-get-navi.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_GET_NAVI: + +============== +VIDEO_GET_NAVI +============== + +Name +---- + +VIDEO_GET_NAVI + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_GET_NAVI , video_navi_pack_t *navipack) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_GET_NAVI for this command. + + - .. row 3 + + - video_navi_pack_t \*navipack + + - PCI or DSI pack (private stream 2) according to section ??. + + +Description +----------- + +This ioctl returns navigational information from the DVD stream. This is +especially needed if an encoded stream has to be decoded by the +hardware. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EFAULT`` + + - driver is not able to return navigational information diff --git a/Documentation/media/uapi/dvb/video-get-pts.rst b/Documentation/media/uapi/dvb/video-get-pts.rst new file mode 100644 index 000000000000..082612243bbb --- /dev/null +++ b/Documentation/media/uapi/dvb/video-get-pts.rst @@ -0,0 +1,69 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_GET_PTS: + +============= +VIDEO_GET_PTS +============= + +Name +---- + +VIDEO_GET_PTS + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = VIDEO_GET_PTS, __u64 *pts) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_GET_PTS for this command. + + - .. row 3 + + - __u64 \*pts + + - Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / + ISO/IEC 13818-1. + + The PTS should belong to the currently played frame if possible, + but may also be a value close to it like the PTS of the last + decoded frame or the last PTS extracted by the PES parser. + + +Description +----------- + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders +this ioctl has been replaced by the ``V4L2_CID_MPEG_VIDEO_DEC_PTS`` +control. + +This ioctl call asks the Video Device to return the current PTS +timestamp. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-get-size.rst b/Documentation/media/uapi/dvb/video-get-size.rst new file mode 100644 index 000000000000..c75e3c47c471 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-get-size.rst @@ -0,0 +1,59 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_GET_SIZE: + +============== +VIDEO_GET_SIZE +============== + +Name +---- + +VIDEO_GET_SIZE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = VIDEO_GET_SIZE, video_size_t *size) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_GET_SIZE for this command. + + - .. row 3 + + - video_size_t \*size + + - Returns the size and aspect ratio. + + +Description +----------- + +This ioctl returns the size and aspect ratio. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-get-status.rst b/Documentation/media/uapi/dvb/video-get-status.rst new file mode 100644 index 000000000000..ab9c2236df7e --- /dev/null +++ b/Documentation/media/uapi/dvb/video-get-status.rst @@ -0,0 +1,60 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_GET_STATUS: + +================ +VIDEO_GET_STATUS +================ + +Name +---- + +VIDEO_GET_STATUS + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_GET_STATUS, struct video_status *status) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_GET_STATUS for this command. + + - .. row 3 + + - struct video_status \*status + + - Returns the current status of the Video Device. + + +Description +----------- + +This ioctl call asks the Video Device to return the current status of +the device. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-play.rst b/Documentation/media/uapi/dvb/video-play.rst new file mode 100644 index 000000000000..943c4b755372 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-play.rst @@ -0,0 +1,57 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_PLAY: + +========== +VIDEO_PLAY +========== + +Name +---- + +VIDEO_PLAY + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_PLAY) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_PLAY for this command. + + +Description +----------- + +This ioctl is for DVB devices only. To control a V4L2 decoder use the +V4L2 :ref:`VIDIOC_DECODER_CMD` instead. + +This ioctl call asks the Video Device to start playing a video stream +from the selected source. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-select-source.rst b/Documentation/media/uapi/dvb/video-select-source.rst new file mode 100644 index 000000000000..0ee0d03dbeb2 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-select-source.rst @@ -0,0 +1,65 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SELECT_SOURCE: + +=================== +VIDEO_SELECT_SOURCE +=================== + +Name +---- + +VIDEO_SELECT_SOURCE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SELECT_SOURCE, video_stream_source_t source) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SELECT_SOURCE for this command. + + - .. row 3 + + - video_stream_source_t source + + - Indicates which source shall be used for the Video stream. + + +Description +----------- + +This ioctl is for DVB devices only. This ioctl was also supported by the +V4L2 ivtv driver, but that has been replaced by the ivtv-specific +``IVTV_IOC_PASSTHROUGH_MODE`` ioctl. + +This ioctl call informs the video device which source shall be used for +the input data. The possible sources are demux or memory. If memory is +selected, the data is fed to the video device through the write command. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-set-attributes.rst b/Documentation/media/uapi/dvb/video-set-attributes.rst new file mode 100644 index 000000000000..326c5c876e80 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-attributes.rst @@ -0,0 +1,75 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_ATTRIBUTES: + +==================== +VIDEO_SET_ATTRIBUTES +==================== + +Name +---- + +VIDEO_SET_ATTRIBUTES + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SET_ATTRIBUTE ,video_attributes_t vattr) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_ATTRIBUTE for this command. + + - .. row 3 + + - video_attributes_t vattr + + - video attributes according to section ??. + + +Description +----------- + +This ioctl is intended for DVD playback and allows you to set certain +information about the stream. Some hardware may not need this +information, but the call also tells the hardware to prepare for DVD +playback. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - input is not a valid attribute setting. diff --git a/Documentation/media/uapi/dvb/video-set-blank.rst b/Documentation/media/uapi/dvb/video-set-blank.rst new file mode 100644 index 000000000000..142ea8817380 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-blank.rst @@ -0,0 +1,64 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_BLANK: + +=============== +VIDEO_SET_BLANK +=============== + +Name +---- + +VIDEO_SET_BLANK + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SET_BLANK, boolean mode) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_BLANK for this command. + + - .. row 3 + + - boolean mode + + - TRUE: Blank screen when stop. + + - .. row 4 + + - + - FALSE: Show last decoded frame. + + +Description +----------- + +This ioctl call asks the Video Device to blank out the picture. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-set-display-format.rst b/Documentation/media/uapi/dvb/video-set-display-format.rst new file mode 100644 index 000000000000..2061ab064977 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-display-format.rst @@ -0,0 +1,60 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_DISPLAY_FORMAT: + +======================== +VIDEO_SET_DISPLAY_FORMAT +======================== + +Name +---- + +VIDEO_SET_DISPLAY_FORMAT + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SET_DISPLAY_FORMAT, video_display_format_t format) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_DISPLAY_FORMAT for this command. + + - .. row 3 + + - video_display_format_t format + + - Selects the video format to be used. + + +Description +----------- + +This ioctl call asks the Video Device to select the video format to be +applied by the MPEG chip on the video. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-set-format.rst b/Documentation/media/uapi/dvb/video-set-format.rst new file mode 100644 index 000000000000..53d66ec462ca --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-format.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_FORMAT: + +================ +VIDEO_SET_FORMAT +================ + +Name +---- + +VIDEO_SET_FORMAT + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SET_FORMAT, video_format_t format) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_FORMAT for this command. + + - .. row 3 + + - video_format_t format + + - video format of TV as defined in section ??. + + +Description +----------- + +This ioctl sets the screen format (aspect ratio) of the connected output +device (TV) so that the output of the decoder can be adjusted +accordingly. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - format is not a valid video format. diff --git a/Documentation/media/uapi/dvb/video-set-highlight.rst b/Documentation/media/uapi/dvb/video-set-highlight.rst new file mode 100644 index 000000000000..374f5d895b4d --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-highlight.rst @@ -0,0 +1,60 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_HIGHLIGHT: + +=================== +VIDEO_SET_HIGHLIGHT +=================== + +Name +---- + +VIDEO_SET_HIGHLIGHT + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SET_HIGHLIGHT ,video_highlight_t *vhilite) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_HIGHLIGHT for this command. + + - .. row 3 + + - video_highlight_t \*vhilite + + - SPU Highlight information according to section ??. + + +Description +----------- + +This ioctl sets the SPU highlight information for the menu access of a +DVD. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-set-id.rst b/Documentation/media/uapi/dvb/video-set-id.rst new file mode 100644 index 000000000000..9c002d5399ad --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-id.rst @@ -0,0 +1,73 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_ID: + +============ +VIDEO_SET_ID +============ + +Name +---- + +VIDEO_SET_ID + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = VIDEO_SET_ID, int id) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_ID for this command. + + - .. row 3 + + - int id + + - video sub-stream id + + +Description +----------- + +This ioctl selects which sub-stream is to be decoded if a program or +system stream is sent to the video device. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - Invalid sub-stream id. diff --git a/Documentation/media/uapi/dvb/video-set-spu-palette.rst b/Documentation/media/uapi/dvb/video-set-spu-palette.rst new file mode 100644 index 000000000000..4b80b6f56219 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-spu-palette.rst @@ -0,0 +1,72 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_SPU_PALETTE: + +===================== +VIDEO_SET_SPU_PALETTE +===================== + +Name +---- + +VIDEO_SET_SPU_PALETTE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SET_SPU_PALETTE, video_spu_palette_t *palette ) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_SPU_PALETTE for this command. + + - .. row 3 + + - video_spu_palette_t \*palette + + - SPU palette according to section ??. + + +Description +----------- + +This ioctl sets the SPU color palette. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - input is not a valid palette or driver doesn’t handle SPU. diff --git a/Documentation/media/uapi/dvb/video-set-spu.rst b/Documentation/media/uapi/dvb/video-set-spu.rst new file mode 100644 index 000000000000..a6f6924f10c4 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-spu.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_SPU: + +============= +VIDEO_SET_SPU +============= + +Name +---- + +VIDEO_SET_SPU + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SET_SPU , video_spu_t *spu) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_SPU for this command. + + - .. row 3 + + - video_spu_t \*spu + + - SPU decoding (de)activation and subid setting according to section + ??. + + +Description +----------- + +This ioctl activates or deactivates SPU decoding in a DVD input stream. +It can only be used, if the driver is able to handle a DVD stream. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - input is not a valid spu setting or driver cannot handle SPU. diff --git a/Documentation/media/uapi/dvb/video-set-streamtype.rst b/Documentation/media/uapi/dvb/video-set-streamtype.rst new file mode 100644 index 000000000000..75b2e7a6e829 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-streamtype.rst @@ -0,0 +1,61 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_STREAMTYPE: + +==================== +VIDEO_SET_STREAMTYPE +==================== + +Name +---- + +VIDEO_SET_STREAMTYPE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SET_STREAMTYPE, int type) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_STREAMTYPE for this command. + + - .. row 3 + + - int type + + - stream type + + +Description +----------- + +This ioctl tells the driver which kind of stream to expect being written +to it. If this call is not used the default of video PES is used. Some +drivers might not support this call and always expect PES. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-set-system.rst b/Documentation/media/uapi/dvb/video-set-system.rst new file mode 100644 index 000000000000..9ae0df1f5813 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-set-system.rst @@ -0,0 +1,75 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SET_SYSTEM: + +================ +VIDEO_SET_SYSTEM +================ + +Name +---- + +VIDEO_SET_SYSTEM + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SET_SYSTEM , video_system_t system) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SET_FORMAT for this command. + + - .. row 3 + + - video_system_t system + + - video system of TV output. + + +Description +----------- + +This ioctl sets the television output format. The format (see section +??) may vary from the color format of the displayed MPEG stream. If the +hardware is not able to display the requested format the call will +return an error. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EINVAL`` + + - system is not a valid or supported video system. diff --git a/Documentation/media/uapi/dvb/video-slowmotion.rst b/Documentation/media/uapi/dvb/video-slowmotion.rst new file mode 100644 index 000000000000..905712844f6a --- /dev/null +++ b/Documentation/media/uapi/dvb/video-slowmotion.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_SLOWMOTION: + +================ +VIDEO_SLOWMOTION +================ + +Name +---- + +VIDEO_SLOWMOTION + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_SLOWMOTION, int nFrames) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_SLOWMOTION for this command. + + - .. row 3 + + - int nFrames + + - The number of times to repeat each frame. + + +Description +----------- + +This ioctl call asks the video device to repeat decoding frames N number +of times. This call can only be used if VIDEO_SOURCE_MEMORY is +selected. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. + + + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - ``EPERM`` + + - Mode VIDEO_SOURCE_MEMORY not selected. diff --git a/Documentation/media/uapi/dvb/video-stillpicture.rst b/Documentation/media/uapi/dvb/video-stillpicture.rst new file mode 100644 index 000000000000..ed3a2f53b998 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-stillpicture.rst @@ -0,0 +1,61 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_STILLPICTURE: + +================== +VIDEO_STILLPICTURE +================== + +Name +---- + +VIDEO_STILLPICTURE + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_STILLPICTURE, struct video_still_picture *sp) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_STILLPICTURE for this command. + + - .. row 3 + + - struct video_still_picture \*sp + + - Pointer to a location where an I-frame and size is stored. + + +Description +----------- + +This ioctl call asks the Video Device to display a still picture +(I-frame). The input data shall contain an I-frame. If the pointer is +NULL, then the current displayed still picture is blanked. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-stop.rst b/Documentation/media/uapi/dvb/video-stop.rst new file mode 100644 index 000000000000..ad8d59e06004 --- /dev/null +++ b/Documentation/media/uapi/dvb/video-stop.rst @@ -0,0 +1,74 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_STOP: + +========== +VIDEO_STOP +========== + +Name +---- + +VIDEO_STOP + + +Synopsis +-------- + +.. cpp:function:: int ioctl(fd, int request = VIDEO_STOP, boolean mode) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_STOP for this command. + + - .. row 3 + + - Boolean mode + + - Indicates how the screen shall be handled. + + - .. row 4 + + - + - TRUE: Blank screen when stop. + + - .. row 5 + + - + - FALSE: Show last decoded frame. + + +Description +----------- + +This ioctl is for DVB devices only. To control a V4L2 decoder use the +V4L2 :ref:`VIDIOC_DECODER_CMD` instead. + +This ioctl call asks the Video Device to stop playing the current +stream. Depending on the input parameter, the screen can be blanked out +or displaying the last decoded frame. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video-try-command.rst b/Documentation/media/uapi/dvb/video-try-command.rst new file mode 100644 index 000000000000..df96c2d7fc6b --- /dev/null +++ b/Documentation/media/uapi/dvb/video-try-command.rst @@ -0,0 +1,66 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _VIDEO_TRY_COMMAND: + +================= +VIDEO_TRY_COMMAND +================= + +Name +---- + +VIDEO_TRY_COMMAND + + +Synopsis +-------- + +.. cpp:function:: int ioctl(int fd, int request = VIDEO_TRY_COMMAND, struct video_command *cmd) + + +Arguments +--------- + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + + + - .. row 1 + + - int fd + + - File descriptor returned by a previous call to open(). + + - .. row 2 + + - int request + + - Equals VIDEO_TRY_COMMAND for this command. + + - .. row 3 + + - struct video_command \*cmd + + - Try a decoder command. + + +Description +----------- + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders +this ioctl has been replaced by the +:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` ioctl. + +This ioctl tries a decoder command. The ``video_command`` struct is a +subset of the ``v4l2_decoder_cmd`` struct, so refer to the +:ref:`VIDIOC_TRY_DECODER_CMD <VIDIOC_DECODER_CMD>` documentation +for more information. + + +Return Value +------------ + +On success 0 is returned, on error -1 and the ``errno`` variable is set +appropriately. The generic error codes are described at the +:ref:`Generic Error Codes <gen-errors>` chapter. diff --git a/Documentation/media/uapi/dvb/video.rst b/Documentation/media/uapi/dvb/video.rst new file mode 100644 index 000000000000..60d43fb7ce22 --- /dev/null +++ b/Documentation/media/uapi/dvb/video.rst @@ -0,0 +1,35 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _dvb_video: + +################ +DVB Video Device +################ +The DVB video device controls the MPEG2 video decoder of the DVB +hardware. It can be accessed through **/dev/dvb/adapter0/video0**. Data +types and and ioctl definitions can be accessed by including +**linux/dvb/video.h** in your application. + +Note that the DVB video device only controls decoding of the MPEG video +stream, not its presentation on the TV or computer screen. On PCs this +is typically handled by an associated video4linux device, e.g. +**/dev/video**, which allows scaling and defining output windows. + +Some DVB cards don’t have their own MPEG decoder, which results in the +omission of the audio and video device as well as the video4linux +device. + +The ioctls that deal with SPUs (sub picture units) and navigation +packets are only supported on some MPEG decoders made for DVD playback. + +These ioctls were also used by V4L2 to control MPEG decoders implemented +in V4L2. The use of these ioctls for that purpose has been made obsolete +and proper V4L2 ioctls or controls have been created to replace that +functionality. + + +.. toctree:: + :maxdepth: 1 + + video_types + video_function_calls diff --git a/Documentation/media/uapi/dvb/video_function_calls.rst b/Documentation/media/uapi/dvb/video_function_calls.rst new file mode 100644 index 000000000000..68588ac7fecb --- /dev/null +++ b/Documentation/media/uapi/dvb/video_function_calls.rst @@ -0,0 +1,43 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _video_function_calls: + +******************** +Video Function Calls +******************** + +.. toctree:: + :maxdepth: 1 + + video-fopen + video-fclose + video-fwrite + video-stop + video-play + video-freeze + video-continue + video-select-source + video-set-blank + video-get-status + video-get-frame-count + video-get-pts + video-get-frame-rate + video-get-event + video-command + video-try-command + video-get-size + video-set-display-format + video-stillpicture + video-fast-forward + video-slowmotion + video-get-capabilities + video-set-id + video-clear-buffer + video-set-streamtype + video-set-format + video-set-system + video-set-highlight + video-set-spu + video-set-spu-palette + video-get-navi + video-set-attributes diff --git a/Documentation/media/uapi/dvb/video_h.rst b/Documentation/media/uapi/dvb/video_h.rst new file mode 100644 index 000000000000..3f39b0c4879c --- /dev/null +++ b/Documentation/media/uapi/dvb/video_h.rst @@ -0,0 +1,9 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _video_h: + +********************* +DVB Video Header File +********************* + +.. kernel-include:: $BUILDDIR/video.h.rst diff --git a/Documentation/media/uapi/dvb/video_types.rst b/Documentation/media/uapi/dvb/video_types.rst new file mode 100644 index 000000000000..671f365ceeb4 --- /dev/null +++ b/Documentation/media/uapi/dvb/video_types.rst @@ -0,0 +1,379 @@ +.. -*- coding: utf-8; mode: rst -*- + +.. _video_types: + +**************** +Video Data Types +**************** + + +.. _video-format-t: + +video_format_t +============== + +The ``video_format_t`` data type defined by + + +.. code-block:: c + + typedef enum { + VIDEO_FORMAT_4_3, /* Select 4:3 format */ + VIDEO_FORMAT_16_9, /* Select 16:9 format. */ + VIDEO_FORMAT_221_1 /* 2.21:1 */ + } video_format_t; + +is used in the VIDEO_SET_FORMAT function (??) to tell the driver which +aspect ratio the output hardware (e.g. TV) has. It is also used in the +data structures video_status (??) returned by VIDEO_GET_STATUS (??) +and video_event (??) returned by VIDEO_GET_EVENT (??) which report +about the display format of the current video stream. + + +.. _video-displayformat-t: + +video_displayformat_t +===================== + +In case the display format of the video stream and of the display +hardware differ the application has to specify how to handle the +cropping of the picture. This can be done using the +VIDEO_SET_DISPLAY_FORMAT call (??) which accepts + + +.. code-block:: c + + typedef enum { + VIDEO_PAN_SCAN, /* use pan and scan format */ + VIDEO_LETTER_BOX, /* use letterbox format */ + VIDEO_CENTER_CUT_OUT /* use center cut out format */ + } video_displayformat_t; + +as argument. + + +.. _video-stream-source-t: + +video_stream_source_t +===================== + +The video stream source is set through the VIDEO_SELECT_SOURCE call +and can take the following values, depending on whether we are replaying +from an internal (demuxer) or external (user write) source. + + +.. code-block:: c + + typedef enum { + VIDEO_SOURCE_DEMUX, /* Select the demux as the main source */ + VIDEO_SOURCE_MEMORY /* If this source is selected, the stream + comes from the user through the write + system call */ + } video_stream_source_t; + +VIDEO_SOURCE_DEMUX selects the demultiplexer (fed either by the +frontend or the DVR device) as the source of the video stream. If +VIDEO_SOURCE_MEMORY is selected the stream comes from the application +through the **write()** system call. + + +.. _video-play-state-t: + +video_play_state_t +================== + +The following values can be returned by the VIDEO_GET_STATUS call +representing the state of video playback. + + +.. code-block:: c + + typedef enum { + VIDEO_STOPPED, /* Video is stopped */ + VIDEO_PLAYING, /* Video is currently playing */ + VIDEO_FREEZED /* Video is freezed */ + } video_play_state_t; + + +.. _video-command: + +struct video_command +==================== + +The structure must be zeroed before use by the application This ensures +it can be extended safely in the future. + + +.. code-block:: c + + struct video_command { + __u32 cmd; + __u32 flags; + union { + struct { + __u64 pts; + } stop; + + struct { + /* 0 or 1000 specifies normal speed, + 1 specifies forward single stepping, + -1 specifies backward single stepping, + >>1: playback at speed/1000 of the normal speed, + <-1: reverse playback at (-speed/1000) of the normal speed. */ + __s32 speed; + __u32 format; + } play; + + struct { + __u32 data[16]; + } raw; + }; + }; + + +.. _video-size-t: + +video_size_t +============ + + +.. code-block:: c + + typedef struct { + int w; + int h; + video_format_t aspect_ratio; + } video_size_t; + + +.. _video-event: + +struct video_event +================== + +The following is the structure of a video event as it is returned by the +VIDEO_GET_EVENT call. + + +.. code-block:: c + + struct video_event { + __s32 type; + #define VIDEO_EVENT_SIZE_CHANGED 1 + #define VIDEO_EVENT_FRAME_RATE_CHANGED 2 + #define VIDEO_EVENT_DECODER_STOPPED 3 + #define VIDEO_EVENT_VSYNC 4 + __kernel_time_t timestamp; + union { + video_size_t size; + unsigned int frame_rate; /* in frames per 1000sec */ + unsigned char vsync_field; /* unknown/odd/even/progressive */ + } u; + }; + + +.. _video-status: + +struct video_status +=================== + +The VIDEO_GET_STATUS call returns the following structure informing +about various states of the playback operation. + + +.. code-block:: c + + struct video_status { + int video_blank; /* blank video on freeze? */ + video_play_state_t play_state; /* current state of playback */ + video_stream_source_t stream_source; /* current source (demux/memory) */ + video_format_t video_format; /* current aspect ratio of stream */ + video_displayformat_t display_format;/* selected cropping mode */ + }; + +If video_blank is set video will be blanked out if the channel is +changed or if playback is stopped. Otherwise, the last picture will be +displayed. play_state indicates if the video is currently frozen, +stopped, or being played back. The stream_source corresponds to the +seleted source for the video stream. It can come either from the +demultiplexer or from memory. The video_format indicates the aspect +ratio (one of 4:3 or 16:9) of the currently played video stream. +Finally, display_format corresponds to the selected cropping mode in +case the source video format is not the same as the format of the output +device. + + +.. _video-still-picture: + +struct video_still_picture +========================== + +An I-frame displayed via the VIDEO_STILLPICTURE call is passed on +within the following structure. + + +.. code-block:: c + + /* pointer to and size of a single iframe in memory */ + struct video_still_picture { + char *iFrame; /* pointer to a single iframe in memory */ + int32_t size; + }; + + +.. _video_caps: + +video capabilities +================== + +A call to VIDEO_GET_CAPABILITIES returns an unsigned integer with the +following bits set according to the hardwares capabilities. + + +.. code-block:: c + + /* bit definitions for capabilities: */ + /* can the hardware decode MPEG1 and/or MPEG2? */ + #define VIDEO_CAP_MPEG1 1 + #define VIDEO_CAP_MPEG2 2 + /* can you send a system and/or program stream to video device? + (you still have to open the video and the audio device but only + send the stream to the video device) */ + #define VIDEO_CAP_SYS 4 + #define VIDEO_CAP_PROG 8 + /* can the driver also handle SPU, NAVI and CSS encoded data? + (CSS API is not present yet) */ + #define VIDEO_CAP_SPU 16 + #define VIDEO_CAP_NAVI 32 + #define VIDEO_CAP_CSS 64 + + +.. _video-system: + +video_system_t +============== + +A call to VIDEO_SET_SYSTEM sets the desired video system for TV +output. The following system types can be set: + + +.. code-block:: c + + typedef enum { + VIDEO_SYSTEM_PAL, + VIDEO_SYSTEM_NTSC, + VIDEO_SYSTEM_PALN, + VIDEO_SYSTEM_PALNc, + VIDEO_SYSTEM_PALM, + VIDEO_SYSTEM_NTSC60, + VIDEO_SYSTEM_PAL60, + VIDEO_SYSTEM_PALM60 + } video_system_t; + + +.. _video-highlight: + +struct video_highlight +====================== + +Calling the ioctl VIDEO_SET_HIGHLIGHTS posts the SPU highlight +information. The call expects the following format for that information: + + +.. code-block:: c + + typedef + struct video_highlight { + boolean active; /* 1=show highlight, 0=hide highlight */ + uint8_t contrast1; /* 7- 4 Pattern pixel contrast */ + /* 3- 0 Background pixel contrast */ + uint8_t contrast2; /* 7- 4 Emphasis pixel-2 contrast */ + /* 3- 0 Emphasis pixel-1 contrast */ + uint8_t color1; /* 7- 4 Pattern pixel color */ + /* 3- 0 Background pixel color */ + uint8_t color2; /* 7- 4 Emphasis pixel-2 color */ + /* 3- 0 Emphasis pixel-1 color */ + uint32_t ypos; /* 23-22 auto action mode */ + /* 21-12 start y */ + /* 9- 0 end y */ + uint32_t xpos; /* 23-22 button color number */ + /* 21-12 start x */ + /* 9- 0 end x */ + } video_highlight_t; + + +.. _video-spu: + +struct video_spu +================ + +Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according +to the following format: + + +.. code-block:: c + + typedef + struct video_spu { + boolean active; + int stream_id; + } video_spu_t; + + +.. _video-spu-palette: + +struct video_spu_palette +======================== + +The following structure is used to set the SPU palette by calling +VIDEO_SPU_PALETTE: + + +.. code-block:: c + + typedef + struct video_spu_palette { + int length; + uint8_t *palette; + } video_spu_palette_t; + + +.. _video-navi-pack: + +struct video_navi_pack +====================== + +In order to get the navigational data the following structure has to be +passed to the ioctl VIDEO_GET_NAVI: + + +.. code-block:: c + + typedef + struct video_navi_pack { + int length; /* 0 ... 1024 */ + uint8_t data[1024]; + } video_navi_pack_t; + + +.. _video-attributes-t: + +video_attributes_t +================== + +The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES: + + +.. code-block:: c + + typedef uint16_t video_attributes_t; + /* bits: descr. */ + /* 15-14 Video compression mode (0=MPEG-1, 1=MPEG-2) */ + /* 13-12 TV system (0=525/60, 1=625/50) */ + /* 11-10 Aspect ratio (0=4:3, 3=16:9) */ + /* 9- 8 permitted display mode on 4:3 monitor (0=both, 1=only pan-sca */ + /* 7 line 21-1 data present in GOP (1=yes, 0=no) */ + /* 6 line 21-2 data present in GOP (1=yes, 0=no) */ + /* 5- 3 source resolution (0=720x480/576, 1=704x480/576, 2=352x480/57 */ + /* 2 source letterboxed (1=yes, 0=no) */ + /* 0 film/camera mode (0=camera, 1=film (625/50 only)) */ |
