diff options
Diffstat (limited to 'Documentation/sound')
-rw-r--r-- | Documentation/sound/alsa/ALSA-Configuration.txt | 2 | ||||
-rw-r--r-- | Documentation/sound/alsa/HD-Audio-Models.txt | 19 | ||||
-rw-r--r-- | Documentation/sound/alsa/HD-Audio.txt | 2 | ||||
-rw-r--r-- | Documentation/sound/alsa/Procfile.txt | 8 | ||||
-rw-r--r-- | Documentation/sound/alsa/alsa-parameters.txt | 135 | ||||
-rw-r--r-- | Documentation/sound/alsa/soc/DAI.txt | 2 | ||||
-rw-r--r-- | Documentation/sound/alsa/soc/codec.txt | 2 | ||||
-rw-r--r-- | Documentation/sound/alsa/soc/platform.txt | 2 | ||||
-rw-r--r-- | Documentation/sound/oss/README.OSS | 5 | ||||
-rw-r--r-- | Documentation/sound/oss/oss-parameters.txt | 51 |
10 files changed, 218 insertions, 10 deletions
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 2075bbb8b3e2..7f4dcebda9c6 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1285,7 +1285,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. about this driver. Note that it has been discontinued, but the Voyetra Turtle Beach knowledge base entry for it is still available at - http://www.turtlebeach.com/site/kb_ftp/790.asp + http://www.turtlebeach.com Module snd-msnd-pinnacle ------------------------ diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 1d38b0dfba95..ce46fa1e643e 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -83,8 +83,8 @@ ALC269 ====== basic Basic preset quanta Quanta FL1 - eeepc-p703 ASUS Eeepc P703 P900A - eeepc-p901 ASUS Eeepc P901 S101 + laptop-amic Laptops with analog-mic input + laptop-dmic Laptops with digital-mic input fujitsu FSC Amilo lifebook Fujitsu Lifebook S6420 auto auto-config reading BIOS (default) @@ -109,11 +109,18 @@ ALC662/663/272 asus-mode4 ASUS asus-mode5 ASUS asus-mode6 ASUS + asus-mode7 ASUS + asus-mode8 ASUS dell Dell with ALC272 dell-zm1 Dell ZM1 with ALC272 samsung-nc10 Samsung NC10 mini notebook auto auto-config reading BIOS (default) +ALC680 +====== + base Base model (ASUS NX90) + auto auto-config reading BIOS (default) + ALC882/883/885/888/889 ====================== 3stack-dig 3-jack with SPDIF I/O @@ -282,6 +289,7 @@ Conexant 5051 hp HP Spartan laptop hp-dv6736 HP dv6736 hp-f700 HP Compaq Presario F700 + ideapad Lenovo IdeaPad laptop lenovo-x200 Lenovo X200 laptop toshiba Toshiba Satellite M300 @@ -289,8 +297,10 @@ Conexant 5066 ============= laptop Basic Laptop config (default) dell-laptop Dell laptops + dell-vostro Dell Vostro olpc-xo-1_5 OLPC XO 1.5 ideapad Lenovo IdeaPad U150 + thinkpad Lenovo Thinkpad STAC9200 ======== @@ -398,6 +408,7 @@ STAC92HD83* mic-ref Reference board with power management for ports dell-s14 Dell laptop hp HP laptops with (inverted) mute-LED + hp-dv7-4000 HP dv-7 4000 auto BIOS setup (default) STAC9872 @@ -410,3 +421,7 @@ Cirrus Logic CS4206/4207 mbp55 MacBook Pro 5,5 imac27 IMac 27 Inch auto BIOS setup (default) + +VIA VT17xx/VT18xx/VT20xx +======================== + auto BIOS setup (default) diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index bdafdbd32561..278cc2122ea0 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -562,7 +562,7 @@ compare the codec registers directly. Send a bug report either the followings: kernel-bugzilla:: - http://bugme.linux-foundation.org/ + https://bugzilla.kernel.org/ alsa-devel ML:: alsa-devel@alsa-project.org diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt index 07301de12cc4..7fcd1ad96fcc 100644 --- a/Documentation/sound/alsa/Procfile.txt +++ b/Documentation/sound/alsa/Procfile.txt @@ -103,6 +103,8 @@ card*/pcm*/xrun_debug bit 2 = Enable additional jiffies check bit 3 = Log hwptr update at each period interrupt bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr() + bit 5 = Show last 10 positions on error + bit 6 = Do above only once When the bit 0 is set, the driver will show the messages to kernel log when an xrun is detected. The debug message is @@ -122,6 +124,12 @@ card*/pcm*/xrun_debug Bits 3 and 4 are for logging the hwptr records. Note that these will give flood of kernel messages. + When bit 5 is set, the driver logs the last 10 xrun errors and + the proc file shows each jiffies, position, period_size, + buffer_size, old_hw_ptr, and hw_ptr_base values. + + When bit 6 is set, the full xrun log is shown only once. + card*/pcm*/sub*/info The general information of this PCM sub-stream. diff --git a/Documentation/sound/alsa/alsa-parameters.txt b/Documentation/sound/alsa/alsa-parameters.txt new file mode 100644 index 000000000000..0fa40679b080 --- /dev/null +++ b/Documentation/sound/alsa/alsa-parameters.txt @@ -0,0 +1,135 @@ + ALSA Kernel Parameters + ~~~~~~~~~~~~~~~~~~~~~~ + +See Documentation/kernel-parameters.txt for general information on +specifying module parameters. + +This document may not be entirely up to date and comprehensive. The command +"modinfo -p ${modulename}" shows a current list of all parameters of a loadable +module. Loadable modules, after being loaded into the running kernel, also +reveal their parameters in /sys/module/${modulename}/parameters/. Some of these +parameters may be changed at runtime by the command +"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}". + + + snd-ad1816a= [HW,ALSA] + + snd-ad1848= [HW,ALSA] + + snd-ali5451= [HW,ALSA] + + snd-als100= [HW,ALSA] + + snd-als4000= [HW,ALSA] + + snd-azt2320= [HW,ALSA] + + snd-cmi8330= [HW,ALSA] + + snd-cmipci= [HW,ALSA] + + snd-cs4231= [HW,ALSA] + + snd-cs4232= [HW,ALSA] + + snd-cs4236= [HW,ALSA] + + snd-cs4281= [HW,ALSA] + + snd-cs46xx= [HW,ALSA] + + snd-dt019x= [HW,ALSA] + + snd-dummy= [HW,ALSA] + + snd-emu10k1= [HW,ALSA] + + snd-ens1370= [HW,ALSA] + + snd-ens1371= [HW,ALSA] + + snd-es968= [HW,ALSA] + + snd-es1688= [HW,ALSA] + + snd-es18xx= [HW,ALSA] + + snd-es1938= [HW,ALSA] + + snd-es1968= [HW,ALSA] + + snd-fm801= [HW,ALSA] + + snd-gusclassic= [HW,ALSA] + + snd-gusextreme= [HW,ALSA] + + snd-gusmax= [HW,ALSA] + + snd-hdsp= [HW,ALSA] + + snd-ice1712= [HW,ALSA] + + snd-intel8x0= [HW,ALSA] + + snd-interwave= [HW,ALSA] + + snd-interwave-stb= + [HW,ALSA] + + snd-korg1212= [HW,ALSA] + + snd-maestro3= [HW,ALSA] + + snd-mpu401= [HW,ALSA] + + snd-mtpav= [HW,ALSA] + + snd-nm256= [HW,ALSA] + + snd-opl3sa2= [HW,ALSA] + + snd-opti92x-ad1848= + [HW,ALSA] + + snd-opti92x-cs4231= + [HW,ALSA] + + snd-opti93x= [HW,ALSA] + + snd-pmac= [HW,ALSA] + + snd-rme32= [HW,ALSA] + + snd-rme96= [HW,ALSA] + + snd-rme9652= [HW,ALSA] + + snd-sb8= [HW,ALSA] + + snd-sb16= [HW,ALSA] + + snd-sbawe= [HW,ALSA] + + snd-serial= [HW,ALSA] + + snd-sgalaxy= [HW,ALSA] + + snd-sonicvibes= [HW,ALSA] + + snd-sun-amd7930= + [HW,ALSA] + + snd-sun-cs4231= [HW,ALSA] + + snd-trident= [HW,ALSA] + + snd-usb-audio= [HW,ALSA,USB] + + snd-via82xx= [HW,ALSA] + + snd-virmidi= [HW,ALSA] + + snd-wavefront= [HW,ALSA] + + snd-ymfpci= [HW,ALSA] diff --git a/Documentation/sound/alsa/soc/DAI.txt b/Documentation/sound/alsa/soc/DAI.txt index 0ebd7ea9706c..c9679264c559 100644 --- a/Documentation/sound/alsa/soc/DAI.txt +++ b/Documentation/sound/alsa/soc/DAI.txt @@ -13,7 +13,7 @@ frame (FRAME) (usually 48kHz) is always driven by the controller. Each AC97 frame is 21uS long and is divided into 13 time slots. The AC97 specification can be found at :- -http://www.intel.com/design/chipsets/audio/ac97_r23.pdf +http://www.intel.com/p/en_US/business/design I2S diff --git a/Documentation/sound/alsa/soc/codec.txt b/Documentation/sound/alsa/soc/codec.txt index 1e95342ed72e..37ba3a72cb76 100644 --- a/Documentation/sound/alsa/soc/codec.txt +++ b/Documentation/sound/alsa/soc/codec.txt @@ -143,7 +143,7 @@ struct snd_soc_ops { }; Please refer to the ALSA driver PCM documentation for details. -http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm +http://www.alsa-project.org/~iwai/writing-an-alsa-driver/ 5 - DAPM description. diff --git a/Documentation/sound/alsa/soc/platform.txt b/Documentation/sound/alsa/soc/platform.txt index b681d17fc388..06d835987c6a 100644 --- a/Documentation/sound/alsa/soc/platform.txt +++ b/Documentation/sound/alsa/soc/platform.txt @@ -39,7 +39,7 @@ struct snd_soc_platform { }; Please refer to the ALSA driver documentation for details of audio DMA. -http://www.alsa-project.org/~iwai/writing-an-alsa-driver/c436.htm +http://www.alsa-project.org/~iwai/writing-an-alsa-driver/ An example DMA driver is soc/pxa/pxa2xx-pcm.c diff --git a/Documentation/sound/oss/README.OSS b/Documentation/sound/oss/README.OSS index fd42b05b2f55..c615debbf08d 100644 --- a/Documentation/sound/oss/README.OSS +++ b/Documentation/sound/oss/README.OSS @@ -36,7 +36,7 @@ with OSS API. Packages "snd-util-3.8.tar.gz" and "snd-data-0.1.tar.Z" contain useful utilities to be used with this driver. -See http://www.opensound.com/ossfree/getting.html for +See http://www.opensound.com/ossfree/ for download instructions. If you are looking for the installation instructions, please @@ -1438,7 +1438,7 @@ of this driver (see http://www.4Front-tech.com/oss.html for more info). There are some common audio chipsets that are not supported yet. For example Sierra Aria and IBM Mwave. It's possible that these architectures get some support in future but I can't make any promises. Just look -at the home page (http://www.opensound.com/ossfree/new_cards.html) +at the home page (http://www.opensound.com/ossfree/) for latest info. Information about unsupported sound cards and chipsets is welcome as well @@ -1449,7 +1449,6 @@ If you have any corrections and/or comments, please contact me. Hannu Savolainen hannu@opensound.com -Personal home page: http://www.compusonic.fi/~hannu home page of OSS/Free: http://www.opensound.com/ossfree home page of commercial OSS diff --git a/Documentation/sound/oss/oss-parameters.txt b/Documentation/sound/oss/oss-parameters.txt new file mode 100644 index 000000000000..3ab391e7c295 --- /dev/null +++ b/Documentation/sound/oss/oss-parameters.txt @@ -0,0 +1,51 @@ + OSS Kernel Parameters + ~~~~~~~~~~~~~~~~~~~~~ + +See Documentation/kernel-parameters.txt for general information on +specifying module parameters. + +This document may not be entirely up to date and comprehensive. The command +"modinfo -p ${modulename}" shows a current list of all parameters of a loadable +module. Loadable modules, after being loaded into the running kernel, also +reveal their parameters in /sys/module/${modulename}/parameters/. Some of these +parameters may be changed at runtime by the command +"echo -n ${value} > /sys/module/${modulename}/parameters/${parm}". + + + ad1848= [HW,OSS] + Format: <io>,<irq>,<dma>,<dma2>,<type> + + aedsp16= [HW,OSS] Audio Excel DSP 16 + Format: <io>,<irq>,<dma>,<mss_io>,<mpu_io>,<mpu_irq> + See also header of sound/oss/aedsp16.c. + + dmasound= [HW,OSS] Sound subsystem buffers + + mpu401= [HW,OSS] + Format: <io>,<irq> + + opl3= [HW,OSS] + Format: <io> + + pas2= [HW,OSS] Format: + <io>,<irq>,<dma>,<dma16>,<sb_io>,<sb_irq>,<sb_dma>,<sb_dma16> + + pss= [HW,OSS] Personal Sound System (ECHO ESC614) + Format: + <io>,<mss_io>,<mss_irq>,<mss_dma>,<mpu_io>,<mpu_irq> + + sscape= [HW,OSS] + Format: <io>,<irq>,<dma>,<mpu_io>,<mpu_irq> + + trix= [HW,OSS] MediaTrix AudioTrix Pro + Format: + <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq> + + uart401= [HW,OSS] + Format: <io>,<irq> + + uart6850= [HW,OSS] + Format: <io>,<irq> + + waveartist= [HW,OSS] + Format: <io>,<irq>,<dma>,<dma2> |