diff options
Diffstat (limited to 'Documentation')
35 files changed, 353 insertions, 74 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 5bf61881f012..760c889b6cd1 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -523,6 +523,7 @@ What: /sys/devices/system/cpu/vulnerabilities /sys/devices/system/cpu/vulnerabilities/tsx_async_abort /sys/devices/system/cpu/vulnerabilities/itlb_multihit /sys/devices/system/cpu/vulnerabilities/mmio_stale_data + /sys/devices/system/cpu/vulnerabilities/retbleed Date: January 2018 Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org> Description: Information about CPU vulnerabilities diff --git a/Documentation/admin-guide/README.rst b/Documentation/admin-guide/README.rst index caa3c09a5c3f..9eb6b9042f75 100644 --- a/Documentation/admin-guide/README.rst +++ b/Documentation/admin-guide/README.rst @@ -1,9 +1,9 @@ .. _readme: -Linux kernel release 5.x <http://kernel.org/> +Linux kernel release 6.x <http://kernel.org/> ============================================= -These are the release notes for Linux version 5. Read them carefully, +These are the release notes for Linux version 6. Read them carefully, as they tell you what this is all about, explain how to install the kernel, and what to do if something goes wrong. @@ -63,7 +63,7 @@ Installing the kernel source directory where you have permissions (e.g. your home directory) and unpack it:: - xz -cd linux-5.x.tar.xz | tar xvf - + xz -cd linux-6.x.tar.xz | tar xvf - Replace "X" with the version number of the latest kernel. @@ -72,12 +72,12 @@ Installing the kernel source files. They should match the library, and not get messed up by whatever the kernel-du-jour happens to be. - - You can also upgrade between 5.x releases by patching. Patches are + - You can also upgrade between 6.x releases by patching. Patches are distributed in the xz format. To install by patching, get all the newer patch files, enter the top level directory of the kernel source - (linux-5.x) and execute:: + (linux-6.x) and execute:: - xz -cd ../patch-5.x.xz | patch -p1 + xz -cd ../patch-6.x.xz | patch -p1 Replace "x" for all versions bigger than the version "x" of your current source tree, **in_order**, and you should be ok. You may want to remove @@ -85,13 +85,13 @@ Installing the kernel source that there are no failed patches (some-file-name# or some-file-name.rej). If there are, either you or I have made a mistake. - Unlike patches for the 5.x kernels, patches for the 5.x.y kernels + Unlike patches for the 6.x kernels, patches for the 6.x.y kernels (also known as the -stable kernels) are not incremental but instead apply - directly to the base 5.x kernel. For example, if your base kernel is 5.0 - and you want to apply the 5.0.3 patch, you must not first apply the 5.0.1 - and 5.0.2 patches. Similarly, if you are running kernel version 5.0.2 and - want to jump to 5.0.3, you must first reverse the 5.0.2 patch (that is, - patch -R) **before** applying the 5.0.3 patch. You can read more on this in + directly to the base 6.x kernel. For example, if your base kernel is 6.0 + and you want to apply the 6.0.3 patch, you must not first apply the 6.0.1 + and 6.0.2 patches. Similarly, if you are running kernel version 6.0.2 and + want to jump to 6.0.3, you must first reverse the 6.0.2 patch (that is, + patch -R) **before** applying the 6.0.3 patch. You can read more on this in :ref:`Documentation/process/applying-patches.rst <applying_patches>`. Alternatively, the script patch-kernel can be used to automate this @@ -114,7 +114,7 @@ Installing the kernel source Software requirements --------------------- - Compiling and running the 5.x kernels requires up-to-date + Compiling and running the 6.x kernels requires up-to-date versions of various software packages. Consult :ref:`Documentation/process/changes.rst <changes>` for the minimum version numbers required and how to get updates for these packages. Beware that using @@ -132,12 +132,12 @@ Build directory for the kernel place for the output files (including .config). Example:: - kernel source code: /usr/src/linux-5.x + kernel source code: /usr/src/linux-6.x build directory: /home/name/build/kernel To configure and build the kernel, use:: - cd /usr/src/linux-5.x + cd /usr/src/linux-6.x make O=/home/name/build/kernel menuconfig make O=/home/name/build/kernel sudo make O=/home/name/build/kernel modules_install install diff --git a/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst index 9393c50b5afc..c98fd11907cc 100644 --- a/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst +++ b/Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst @@ -230,6 +230,20 @@ The possible values in this file are: * - 'Mitigation: Clear CPU buffers' - The processor is vulnerable and the CPU buffer clearing mitigation is enabled. + * - 'Unknown: No mitigations' + - The processor vulnerability status is unknown because it is + out of Servicing period. Mitigation is not attempted. + +Definitions: +------------ + +Servicing period: The process of providing functional and security updates to +Intel processors or platforms, utilizing the Intel Platform Update (IPU) +process or other similar mechanisms. + +End of Servicing Updates (ESU): ESU is the date at which Intel will no +longer provide Servicing, such as through IPU or other similar update +processes. ESU dates will typically be aligned to end of quarter. If the processor is vulnerable then the following information is appended to the above information: diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index d7f30902fda0..426fa892d311 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -5331,6 +5331,8 @@ rodata= [KNL] on Mark read-only kernel memory as read-only (default). off Leave read-only kernel memory writable for debugging. + full Mark read-only kernel memory and aliases as read-only + [arm64] rockchip.usb_uart Enable the uart passthrough on the designated usb port diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst index d52f572a9029..ca91ecc29078 100644 --- a/Documentation/admin-guide/mm/damon/usage.rst +++ b/Documentation/admin-guide/mm/damon/usage.rst @@ -50,10 +50,10 @@ For a short example, users can monitor the virtual address space of a given workload as below. :: # cd /sys/kernel/mm/damon/admin/ - # echo 1 > kdamonds/nr && echo 1 > kdamonds/0/contexts/nr + # echo 1 > kdamonds/nr_kdamonds && echo 1 > kdamonds/0/contexts/nr_contexts # echo vaddr > kdamonds/0/contexts/0/operations - # echo 1 > kdamonds/0/contexts/0/targets/nr - # echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid + # echo 1 > kdamonds/0/contexts/0/targets/nr_targets + # echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target # echo on > kdamonds/0/state Files Hierarchy @@ -366,12 +366,12 @@ memory rate becomes larger than 60%, or lower than 30%". :: # echo 1 > kdamonds/0/contexts/0/schemes/nr_schemes # cd kdamonds/0/contexts/0/schemes/0 # # set the basic access pattern and the action - # echo 4096 > access_patterns/sz/min - # echo 8192 > access_patterns/sz/max - # echo 0 > access_patterns/nr_accesses/min - # echo 5 > access_patterns/nr_accesses/max - # echo 10 > access_patterns/age/min - # echo 20 > access_patterns/age/max + # echo 4096 > access_pattern/sz/min + # echo 8192 > access_pattern/sz/max + # echo 0 > access_pattern/nr_accesses/min + # echo 5 > access_pattern/nr_accesses/max + # echo 10 > access_pattern/age/min + # echo 20 > access_pattern/age/max # echo pageout > action # # set quotas # echo 10 > quotas/ms diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index 805f2281e000..60d44165fba7 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -271,7 +271,7 @@ poll cycle or the number of packets processed reaches netdev_budget. netdev_max_backlog ------------------ -Maximum number of packets, queued on the INPUT side, when the interface +Maximum number of packets, queued on the INPUT side, when the interface receives packets faster than kernel can process them. netdev_rss_key diff --git a/Documentation/arm64/elf_hwcaps.rst b/Documentation/arm64/elf_hwcaps.rst index 52b75a25c205..311021f2e560 100644 --- a/Documentation/arm64/elf_hwcaps.rst +++ b/Documentation/arm64/elf_hwcaps.rst @@ -242,44 +242,34 @@ HWCAP2_MTE3 by Documentation/arm64/memory-tagging-extension.rst. HWCAP2_SME - Functionality implied by ID_AA64PFR1_EL1.SME == 0b0001, as described by Documentation/arm64/sme.rst. HWCAP2_SME_I16I64 - Functionality implied by ID_AA64SMFR0_EL1.I16I64 == 0b1111. HWCAP2_SME_F64F64 - Functionality implied by ID_AA64SMFR0_EL1.F64F64 == 0b1. HWCAP2_SME_I8I32 - Functionality implied by ID_AA64SMFR0_EL1.I8I32 == 0b1111. HWCAP2_SME_F16F32 - Functionality implied by ID_AA64SMFR0_EL1.F16F32 == 0b1. HWCAP2_SME_B16F32 - Functionality implied by ID_AA64SMFR0_EL1.B16F32 == 0b1. HWCAP2_SME_F32F32 - Functionality implied by ID_AA64SMFR0_EL1.F32F32 == 0b1. HWCAP2_SME_FA64 - Functionality implied by ID_AA64SMFR0_EL1.FA64 == 0b1. HWCAP2_WFXT - Functionality implied by ID_AA64ISAR2_EL1.WFXT == 0b0010. HWCAP2_EBF16 - Functionality implied by ID_AA64ISAR1_EL1.BF16 == 0b0010. 4. Unused AT_HWCAP bits diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 33b04db8408f..fda97b3fcf01 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -52,6 +52,8 @@ stable kernels. | Allwinner | A64/R18 | UNKNOWN1 | SUN50I_ERRATUM_UNKNOWN1 | +----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A510 | #2457168 | ARM64_ERRATUM_2457168 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2064142 | ARM64_ERRATUM_2064142 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A510 | #2038923 | ARM64_ERRATUM_2038923 | diff --git a/Documentation/atomic_bitops.txt b/Documentation/atomic_bitops.txt index 093cdaefdb37..edea4656c5c0 100644 --- a/Documentation/atomic_bitops.txt +++ b/Documentation/atomic_bitops.txt @@ -58,13 +58,11 @@ Like with atomic_t, the rule of thumb is: - RMW operations that have a return value are fully ordered. - - RMW operations that are conditional are unordered on FAILURE, - otherwise the above rules apply. In the case of test_and_{}_bit() operations, - if the bit in memory is unchanged by the operation then it is deemed to have - failed. + - RMW operations that are conditional are fully ordered. -Except for a successful test_and_set_bit_lock() which has ACQUIRE semantics and -clear_bit_unlock() which has RELEASE semantics. +Except for a successful test_and_set_bit_lock() which has ACQUIRE semantics, +clear_bit_unlock() which has RELEASE semantics and test_bit_acquire which has +ACQUIRE semantics. Since a platform only has a single means of achieving atomic operations the same barriers as for atomic_t are used, see atomic_t.txt. diff --git a/Documentation/block/index.rst b/Documentation/block/index.rst index 68f115f2b1c6..c4c73db748a8 100644 --- a/Documentation/block/index.rst +++ b/Documentation/block/index.rst @@ -23,3 +23,4 @@ Block stat switching-sched writeback_cache_control + ublk diff --git a/Documentation/block/ublk.rst b/Documentation/block/ublk.rst new file mode 100644 index 000000000000..2122d1a4a541 --- /dev/null +++ b/Documentation/block/ublk.rst @@ -0,0 +1,253 @@ +.. SPDX-License-Identifier: GPL-2.0 + +=========================================== +Userspace block device driver (ublk driver) +=========================================== + +Overview +======== + +ublk is a generic framework for implementing block device logic from userspace. +The motivation behind it is that moving virtual block drivers into userspace, +such as loop, nbd and similar can be very helpful. It can help to implement +new virtual block device such as ublk-qcow2 (there are several attempts of +implementing qcow2 driver in kernel). + +Userspace block devices are attractive because: + +- They can be written many programming languages. +- They can use libraries that are not available in the kernel. +- They can be debugged with tools familiar to application developers. +- Crashes do not kernel panic the machine. +- Bugs are likely to have a lower security impact than bugs in kernel + code. +- They can be installed and updated independently of the kernel. +- They can be used to simulate block device easily with user specified + parameters/setting for test/debug purpose + +ublk block device (``/dev/ublkb*``) is added by ublk driver. Any IO request +on the device will be forwarded to ublk userspace program. For convenience, +in this document, ``ublk server`` refers to generic ublk userspace +program. ``ublksrv`` [#userspace]_ is one of such implementation. It +provides ``libublksrv`` [#userspace_lib]_ library for developing specific +user block device conveniently, while also generic type block device is +included, such as loop and null. Richard W.M. Jones wrote userspace nbd device +``nbdublk`` [#userspace_nbdublk]_ based on ``libublksrv`` [#userspace_lib]_. + +After the IO is handled by userspace, the result is committed back to the +driver, thus completing the request cycle. This way, any specific IO handling +logic is totally done by userspace, such as loop's IO handling, NBD's IO +communication, or qcow2's IO mapping. + +``/dev/ublkb*`` is driven by blk-mq request-based driver. Each request is +assigned by one queue wide unique tag. ublk server assigns unique tag to each +IO too, which is 1:1 mapped with IO of ``/dev/ublkb*``. + +Both the IO request forward and IO handling result committing are done via +``io_uring`` passthrough command; that is why ublk is also one io_uring based +block driver. It has been observed that using io_uring passthrough command can +give better IOPS than block IO; which is why ublk is one of high performance +implementation of userspace block device: not only IO request communication is +done by io_uring, but also the preferred IO handling in ublk server is io_uring +based approach too. + +ublk provides control interface to set/get ublk block device parameters. +The interface is extendable and kabi compatible: basically any ublk request +queue's parameter or ublk generic feature parameters can be set/get via the +interface. Thus, ublk is generic userspace block device framework. +For example, it is easy to setup a ublk device with specified block +parameters from userspace. + +Using ublk +========== + +ublk requires userspace ublk server to handle real block device logic. + +Below is example of using ``ublksrv`` to provide ublk-based loop device. + +- add a device:: + + ublk add -t loop -f ublk-loop.img + +- format with xfs, then use it:: + + mkfs.xfs /dev/ublkb0 + mount /dev/ublkb0 /mnt + # do anything. all IOs are handled by io_uring + ... + umount /mnt + +- list the devices with their info:: + + ublk list + +- delete the device:: + + ublk del -a + ublk del -n $ublk_dev_id + +See usage details in README of ``ublksrv`` [#userspace_readme]_. + +Design +====== + +Control plane +------------- + +ublk driver provides global misc device node (``/dev/ublk-control``) for +managing and controlling ublk devices with help of several control commands: + +- ``UBLK_CMD_ADD_DEV`` + + Add a ublk char device (``/dev/ublkc*``) which is talked with ublk server + WRT IO command communication. Basic device info is sent together with this + command. It sets UAPI structure of ``ublksrv_ctrl_dev_info``, + such as ``nr_hw_queues``, ``queue_depth``, and max IO request buffer size, + for which the info is negotiated with the driver and sent back to the server. + When this command is completed, the basic device info is immutable. + +- ``UBLK_CMD_SET_PARAMS`` / ``UBLK_CMD_GET_PARAMS`` + + Set or get parameters of the device, which can be either generic feature + related, or request queue limit related, but can't be IO logic specific, + because the driver does not handle any IO logic. This command has to be + sent before sending ``UBLK_CMD_START_DEV``. + +- ``UBLK_CMD_START_DEV`` + + After the server prepares userspace resources (such as creating per-queue + pthread & io_uring for handling ublk IO), this command is sent to the + driver for allocating & exposing ``/dev/ublkb*``. Parameters set via + ``UBLK_CMD_SET_PARAMS`` are applied for creating the device. + +- ``UBLK_CMD_STOP_DEV`` + + Halt IO on ``/dev/ublkb*`` and remove the device. When this command returns, + ublk server will release resources (such as destroying per-queue pthread & + io_uring). + +- ``UBLK_CMD_DEL_DEV`` + + Remove ``/dev/ublkc*``. When this command returns, the allocated ublk device + number can be reused. + +- ``UBLK_CMD_GET_QUEUE_AFFINITY`` + + When ``/dev/ublkc`` is added, the driver creates block layer tagset, so + that each queue's affinity info is available. The server sends + ``UBLK_CMD_GET_QUEUE_AFFINITY`` to retrieve queue affinity info. It can + set up the per-queue context efficiently, such as bind affine CPUs with IO + pthread and try to allocate buffers in IO thread context. + +- ``UBLK_CMD_GET_DEV_INFO`` + + For retrieving device info via ``ublksrv_ctrl_dev_info``. It is the server's + responsibility to save IO target specific info in userspace. + +Data plane +---------- + +ublk server needs to create per-queue IO pthread & io_uring for handling IO +commands via io_uring passthrough. The per-queue IO pthread +focuses on IO handling and shouldn't handle any control & management +tasks. + +The's IO is assigned by a unique tag, which is 1:1 mapping with IO +request of ``/dev/ublkb*``. + +UAPI structure of ``ublksrv_io_desc`` is defined for describing each IO from +the driver. A fixed mmaped area (array) on ``/dev/ublkc*`` is provided for +exporting IO info to the server; such as IO offset, length, OP/flags and +buffer address. Each ``ublksrv_io_desc`` instance can be indexed via queue id +and IO tag directly. + +The following IO commands are communicated via io_uring passthrough command, +and each command is only for forwarding the IO and committing the result +with specified IO tag in the command data: + +- ``UBLK_IO_FETCH_REQ`` + + Sent from the server IO pthread for fetching future incoming IO requests + destined to ``/dev/ublkb*``. This command is sent only once from the server + IO pthread for ublk driver to setup IO forward environment. + +- ``UBLK_IO_COMMIT_AND_FETCH_REQ`` + + When an IO request is destined to ``/dev/ublkb*``, the driver stores + the IO's ``ublksrv_io_desc`` to the specified mapped area; then the + previous received IO command of this IO tag (either ``UBLK_IO_FETCH_REQ`` + or ``UBLK_IO_COMMIT_AND_FETCH_REQ)`` is completed, so the server gets + the IO notification via io_uring. + + After the server handles the IO, its result is committed back to the + driver by sending ``UBLK_IO_COMMIT_AND_FETCH_REQ`` back. Once ublkdrv + received this command, it parses the result and complete the request to + ``/dev/ublkb*``. In the meantime setup environment for fetching future + requests with the same IO tag. That is, ``UBLK_IO_COMMIT_AND_FETCH_REQ`` + is reused for both fetching request and committing back IO result. + +- ``UBLK_IO_NEED_GET_DATA`` + + With ``UBLK_F_NEED_GET_DATA`` enabled, the WRITE request will be firstly + issued to ublk server without data copy. Then, IO backend of ublk server + receives the request and it can allocate data buffer and embed its addr + inside this new io command. After the kernel driver gets the command, + data copy is done from request pages to this backend's buffer. Finally, + backend receives the request again with data to be written and it can + truly handle the request. + + ``UBLK_IO_NEED_GET_DATA`` adds one additional round-trip and one + io_uring_enter() syscall. Any user thinks that it may lower performance + should not enable UBLK_F_NEED_GET_DATA. ublk server pre-allocates IO + buffer for each IO by default. Any new project should try to use this + buffer to communicate with ublk driver. However, existing project may + break or not able to consume the new buffer interface; that's why this + command is added for backwards compatibility so that existing projects + can still consume existing buffers. + +- data copy between ublk server IO buffer and ublk block IO request + + The driver needs to copy the block IO request pages into the server buffer + (pages) first for WRITE before notifying the server of the coming IO, so + that the server can handle WRITE request. + + When the server handles READ request and sends + ``UBLK_IO_COMMIT_AND_FETCH_REQ`` to the server, ublkdrv needs to copy + the server buffer (pages) read to the IO request pages. + +Future development +================== + +Container-aware ublk deivice +---------------------------- + +ublk driver doesn't handle any IO logic. Its function is well defined +for now and very limited userspace interfaces are needed, which is also +well defined too. It is possible to make ublk devices container-aware block +devices in future as Stefan Hajnoczi suggested [#stefan]_, by removing +ADMIN privilege. + +Zero copy +--------- + +Zero copy is a generic requirement for nbd, fuse or similar drivers. A +problem [#xiaoguang]_ Xiaoguang mentioned is that pages mapped to userspace +can't be remapped any more in kernel with existing mm interfaces. This can +occurs when destining direct IO to ``/dev/ublkb*``. Also, he reported that +big requests (IO size >= 256 KB) may benefit a lot from zero copy. + + +References +========== + +.. [#userspace] https://github.com/ming1/ubdsrv + +.. [#userspace_lib] https://github.com/ming1/ubdsrv/tree/master/lib + +.. [#userspace_nbdublk] https://gitlab.com/rwmjones/libnbd/-/tree/nbdublk + +.. [#userspace_readme] https://github.com/ming1/ubdsrv/blob/master/README + +.. [#stefan] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ + +.. [#xiaoguang] https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/ diff --git a/Documentation/conf.py b/Documentation/conf.py index 934727e23e0e..255384d094bf 100644 --- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -86,6 +86,7 @@ if major >= 3: "__used", "__weak", "noinline", + "__fix_address", # include/linux/memblock.h: "__init_memblock", diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml index 4a92a4c7dcd7..f8168986a0a9 100644 --- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml +++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml @@ -233,6 +233,7 @@ allOf: - allwinner,sun8i-a83t-tcon-lcd - allwinner,sun8i-v3s-tcon - allwinner,sun9i-a80-tcon-lcd + - allwinner,sun20i-d1-tcon-lcd then: properties: @@ -252,6 +253,7 @@ allOf: - allwinner,sun8i-a83t-tcon-tv - allwinner,sun8i-r40-tcon-tv - allwinner,sun9i-a80-tcon-tv + - allwinner,sun20i-d1-tcon-tv then: properties: @@ -278,6 +280,7 @@ allOf: - allwinner,sun9i-a80-tcon-lcd - allwinner,sun4i-a10-tcon - allwinner,sun8i-a83t-tcon-lcd + - allwinner,sun20i-d1-tcon-lcd then: required: @@ -294,6 +297,7 @@ allOf: - allwinner,sun8i-a23-tcon - allwinner,sun8i-a33-tcon - allwinner,sun8i-a83t-tcon-lcd + - allwinner,sun20i-d1-tcon-lcd then: properties: diff --git a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml index b6bbc312a7cf..1414ba9977c1 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/bosch,bmg160.yaml @@ -24,8 +24,10 @@ properties: interrupts: minItems: 1 + maxItems: 2 description: Should be configured with type IRQ_TYPE_EDGE_RISING. + If two interrupts are provided, expected order is INT1 and INT2. required: - compatible diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index 93f2ce3130ae..19ac9da421df 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - goodix,gt1151 + - goodix,gt1158 - goodix,gt5663 - goodix,gt5688 - goodix,gt911 diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt index e6cb2291471c..7ae8aa148634 100644 --- a/Documentation/devicetree/bindings/net/qcom-emac.txt +++ b/Documentation/devicetree/bindings/net/qcom-emac.txt @@ -14,7 +14,7 @@ MAC node: - mac-address : The 6-byte MAC address. If present, it is the default MAC address. - internal-phy : phandle to the internal PHY node -- phy-handle : phandle the external PHY node +- phy-handle : phandle to the external PHY node Internal PHY node: - compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii". diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml index b539781e39aa..835b53302db8 100644 --- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml @@ -47,12 +47,6 @@ properties: description: Properties for single LDO regulator. - properties: - regulator-name: - pattern: "^LDO[1-5]$" - description: - should be "LDO1", ..., "LDO5" - unevaluatedProperties: false "^BUCK[1-6]$": @@ -62,11 +56,6 @@ properties: Properties for single BUCK regulator. properties: - regulator-name: - pattern: "^BUCK[1-6]$" - description: - should be "BUCK1", ..., "BUCK6" - nxp,dvs-run-voltage: $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 600000 diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml index 553601a441a7..510b82c177c0 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml @@ -10,7 +10,7 @@ description: See spi-peripheral-props.yaml for more info. maintainers: - - Pratyush Yadav <p.yadav@ti.com> + - Vaishnav Achath <vaishnav.a@ti.com> properties: # cdns,qspi-nor.yaml diff --git a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml index 0a537fa3a641..4707294d8f59 100644 --- a/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml +++ b/Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Cadence Quad SPI controller maintainers: - - Pratyush Yadav <p.yadav@ti.com> + - Vaishnav Achath <vaishnav.a@ti.com> allOf: - $ref: spi-controller.yaml# diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index ce048e782e80..a4abe1588005 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -16,7 +16,7 @@ description: their own separate schema that should be referenced from here. maintainers: - - Pratyush Yadav <p.yadav@ti.com> + - Mark Brown <broonie@kernel.org> properties: reg: diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml index 00dcbdd36144..119998d10ff4 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.yaml @@ -42,7 +42,7 @@ properties: description: Address ranges of the thermal registers. If more then one range is given the first one must be the common registers followed by each sensor - according the datasheet. + according to the datasheet. minItems: 1 maxItems: 4 diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml index 2d34f3ccb257..8d2c6d74b605 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml @@ -214,6 +214,7 @@ patternProperties: - polling-delay - polling-delay-passive - thermal-sensors + - trips additionalProperties: false diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml index e63b66545317..b019d490170d 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml @@ -24,6 +24,7 @@ properties: - mediatek,mt2712-mtu3 - mediatek,mt8173-mtu3 - mediatek,mt8183-mtu3 + - mediatek,mt8188-mtu3 - mediatek,mt8192-mtu3 - mediatek,mt8195-mtu3 - const: mediatek,mtu3 diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml index fea3e7092ace..cd2f7cb6745a 100644 --- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml +++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml @@ -33,6 +33,7 @@ properties: - qcom,sm6115-dwc3 - qcom,sm6125-dwc3 - qcom,sm6350-dwc3 + - qcom,sm6375-dwc3 - qcom,sm8150-dwc3 - qcom,sm8250-dwc3 - qcom,sm8350-dwc3 @@ -108,12 +109,17 @@ properties: HS/FS/LS modes are supported. type: boolean + wakeup-source: true + # Required child node: patternProperties: "^usb@[0-9a-f]+$": $ref: snps,dwc3.yaml# + properties: + wakeup-source: false + required: - compatible - reg diff --git a/Documentation/input/joydev/joystick.rst b/Documentation/input/joydev/joystick.rst index f615906a0821..6d721396717a 100644 --- a/Documentation/input/joydev/joystick.rst +++ b/Documentation/input/joydev/joystick.rst @@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes: * AVB Mag Turbo Force * AVB Top Shot Pegasus * AVB Top Shot Force Feedback Racing Wheel +* Boeder Force Feedback Wheel * Logitech WingMan Force * Logitech WingMan Force Wheel * Guillemot Race Leader Force Feedback diff --git a/Documentation/kbuild/kconfig-language.rst b/Documentation/kbuild/kconfig-language.rst index 7fb398649f51..858ed5d80def 100644 --- a/Documentation/kbuild/kconfig-language.rst +++ b/Documentation/kbuild/kconfig-language.rst @@ -525,8 +525,8 @@ followed by a test macro:: If you need to expose a compiler capability to makefiles and/or C source files, `CC_HAS_` is the recommended prefix for the config option:: - config CC_HAS_ASM_GOTO - def_bool $(success,$(srctree)/scripts/gcc-goto.sh $(CC)) + config CC_HAS_FOO + def_bool $(success,$(srctree)/scripts/cc-check-foo.sh $(CC)) Build as module only ~~~~~~~~~~~~~~~~~~~~ diff --git a/Documentation/networking/devlink/netdevsim.rst b/Documentation/networking/devlink/netdevsim.rst index 8a292fb5aaea..ec5e6d79b2e2 100644 --- a/Documentation/networking/devlink/netdevsim.rst +++ b/Documentation/networking/devlink/netdevsim.rst @@ -67,7 +67,7 @@ The ``netdevsim`` driver supports rate objects management, which includes: - setting tx_share and tx_max rate values for any rate object type; - setting parent node for any rate object type. -Rate nodes and it's parameters are exposed in ``netdevsim`` debugfs in RO mode. +Rate nodes and their parameters are exposed in ``netdevsim`` debugfs in RO mode. For example created rate node with name ``some_group``: .. code:: shell diff --git a/Documentation/networking/driver.rst b/Documentation/networking/driver.rst index c8f59dbda46f..64f7236ff10b 100644 --- a/Documentation/networking/driver.rst +++ b/Documentation/networking/driver.rst @@ -8,7 +8,7 @@ Transmit path guidelines: 1) The ndo_start_xmit method must not return NETDEV_TX_BUSY under any normal circumstances. It is considered a hard error unless - there is no way your device can tell ahead of time when it's + there is no way your device can tell ahead of time when its transmit function will become busy. Instead it must maintain the queue properly. For example, diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index 56cd4ea059b2..a759872a2883 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -1035,7 +1035,10 @@ tcp_limit_output_bytes - INTEGER tcp_challenge_ack_limit - INTEGER Limits number of Challenge ACK sent per second, as recommended in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks) - Default: 1000 + Note that this per netns rate limit can allow some side channel + attacks and probably should not be enabled. + TCP stack implements per TCP socket limits anyway. + Default: INT_MAX (unlimited) UDP variables ============= diff --git a/Documentation/networking/ipvlan.rst b/Documentation/networking/ipvlan.rst index 694adcba36b0..0000c1d383bc 100644 --- a/Documentation/networking/ipvlan.rst +++ b/Documentation/networking/ipvlan.rst @@ -11,7 +11,7 @@ Initial Release: ================ This is conceptually very similar to the macvlan driver with one major exception of using L3 for mux-ing /demux-ing among slaves. This property makes -the master device share the L2 with it's slave devices. I have developed this +the master device share the L2 with its slave devices. I have developed this driver in conjunction with network namespaces and not sure if there is use case outside of it. diff --git a/Documentation/networking/l2tp.rst b/Documentation/networking/l2tp.rst index 498b382d25a0..7f383e99dbad 100644 --- a/Documentation/networking/l2tp.rst +++ b/Documentation/networking/l2tp.rst @@ -530,7 +530,7 @@ its tunnel close actions. For L2TPIP sockets, the socket's close handler initiates the same tunnel close actions. All sessions are first closed. Each session drops its tunnel ref. When the tunnel ref reaches zero, the tunnel puts its socket ref. When the socket is -eventually destroyed, it's sk_destruct finally frees the L2TP tunnel +eventually destroyed, its sk_destruct finally frees the L2TP tunnel context. Sessions diff --git a/Documentation/networking/switchdev.rst b/Documentation/networking/switchdev.rst index f1f4e6a85a29..bbf272e9d607 100644 --- a/Documentation/networking/switchdev.rst +++ b/Documentation/networking/switchdev.rst @@ -159,7 +159,7 @@ tools such as iproute2. The switchdev driver can know a particular port's position in the topology by monitoring NETDEV_CHANGEUPPER notifications. For example, a port moved into a -bond will see it's upper master change. If that bond is moved into a bridge, +bond will see its upper master change. If that bond is moved into a bridge, the bond's upper master will change. And so on. The driver will track such movements to know what position a port is in in the overall topology by registering for netdevice events and acting on NETDEV_CHANGEUPPER. diff --git a/Documentation/sphinx/kerneldoc-preamble.sty b/Documentation/sphinx/kerneldoc-preamble.sty index 2a29cbe51396..9707e033c8c4 100644 --- a/Documentation/sphinx/kerneldoc-preamble.sty +++ b/Documentation/sphinx/kerneldoc-preamble.sty @@ -70,8 +70,16 @@ % Translations have Asian (CJK) characters which are only displayed if % xeCJK is used +\usepackage{ifthen} +\newboolean{enablecjk} +\setboolean{enablecjk}{false} \IfFontExistsTF{Noto Sans CJK SC}{ - % Load xeCJK when CJK font is available + \IfFileExists{xeCJK.sty}{ + \setboolean{enablecjk}{true} + }{} +}{} +\ifthenelse{\boolean{enablecjk}}{ + % Load xeCJK when both the Noto Sans CJK font and xeCJK.sty are available. \usepackage{xeCJK} % Noto CJK fonts don't provide slant shape. [AutoFakeSlant] permits % its emulation. @@ -196,7 +204,7 @@ % Inactivate CJK after tableofcontents \apptocmd{\sphinxtableofcontents}{\kerneldocCJKoff}{}{} \xeCJKsetup{CJKspace = true}% For inter-phrase space of Korean TOC -}{ % No CJK font found +}{ % Don't enable CJK % Custom macros to on/off CJK and switch CJK fonts (Dummy) \newcommand{\kerneldocCJKon}{} \newcommand{\kerneldocCJKoff}{} @@ -204,14 +212,16 @@ %% and ignore the argument (#1) in their definitions, whole contents of %% CJK chapters can be ignored. \newcommand{\kerneldocBeginSC}[1]{% - %% Put a note on missing CJK fonts in place of zh_CN translation. - \begin{sphinxadmonition}{note}{Note on missing fonts:} + %% Put a note on missing CJK fonts or the xecjk package in place of + %% zh_CN translation. + \begin{sphinxadmonition}{note}{Note on missing fonts and a package:} Translations of Simplified Chinese (zh\_CN), Traditional Chinese (zh\_TW), Korean (ko\_KR), and Japanese (ja\_JP) were skipped - due to the lack of suitable font families. + due to the lack of suitable font families and/or the texlive-xecjk + package. If you want them, please install ``Noto Sans CJK'' font families - by following instructions from + along with the texlive-xecjk package by following instructions from \sphinxcode{./scripts/sphinx-pre-install}. Having optional ``Noto Serif CJK'' font families will improve the looks of those translations. diff --git a/Documentation/tools/rtla/rtla-timerlat-hist.rst b/Documentation/tools/rtla/rtla-timerlat-hist.rst index e12eae1f3301..6bf7f0ca4556 100644 --- a/Documentation/tools/rtla/rtla-timerlat-hist.rst +++ b/Documentation/tools/rtla/rtla-timerlat-hist.rst @@ -33,7 +33,7 @@ EXAMPLE ======= In the example below, **rtla timerlat hist** is set to run for *10* minutes, in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat -hist** will change the priority of the *timelat* threads to run under +hist** will change the priority of the *timerlat* threads to run under *SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The *1ms* period is also passed to the *timerlat* tracer:: diff --git a/Documentation/translations/ja_JP/SubmittingPatches b/Documentation/translations/ja_JP/SubmittingPatches index 66ce0d8b0526..04deb77b20c6 100644 --- a/Documentation/translations/ja_JP/SubmittingPatches +++ b/Documentation/translations/ja_JP/SubmittingPatches @@ -35,8 +35,7 @@ Linux カーネルに変更を加えたいと思っている個人又は会社 てもらえやすくする提案を集めたものです。 コードを投稿する前に、Documentation/process/submit-checklist.rst の項目リストに目 -を通してチェックしてください。もしあなたがドライバーを投稿しようとし -ているなら、Documentation/process/submitting-drivers.rst にも目を通してください。 +を通してチェックしてください。 -------------------------------------------- セクション1 パッチの作り方と送り方 |