diff options
Diffstat (limited to 'Documentation')
4 files changed, 49 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt index 37afec194949..198794963786 100644 --- a/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/gpio-wdt.txt @@ -13,6 +13,11 @@ Required Properties: by the GPIO flags. - hw_margin_ms: Maximum time to reset watchdog circuit (milliseconds). +Optional Properties: +- always-running: If the watchdog timer cannot be disabled, add this flag to + have the driver keep toggling the signal without a client. It will only cease + to toggle the signal when the device is open and the timeout elapsed. + Example: watchdog: watchdog { /* ADM706 */ diff --git a/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt b/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt new file mode 100644 index 000000000000..b2fa11fd43de --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/imgpdc-wdt.txt @@ -0,0 +1,19 @@ +*ImgTec PowerDown Controller (PDC) Watchdog Timer (WDT) + +Required properties: +- compatible : Should be "img,pdc-wdt" +- reg : Should contain WDT registers location and length +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Should contain "wdt" and "sys"; the watchdog counter + clock and register interface clock respectively. +- interrupts : Should contain WDT interrupt + +Examples: + +watchdog@18102100 { + compatible = "img,pdc-wdt"; + reg = <0x18102100 0x100>; + clocks = <&pdc_wdt_clk>, <&sys_clk>; + clock-names = "wdt", "sys"; + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt b/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt new file mode 100644 index 000000000000..e27763ef0049 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/ingenic,jz4740-wdt.txt @@ -0,0 +1,12 @@ +Ingenic Watchdog Timer (WDT) Controller for JZ4740 + +Required properties: +compatible: "ingenic,jz4740-watchdog" +reg: Register address and length for watchdog registers + +Example: + +watchdog: jz4740-watchdog@0x10002000 { + compatible = "ingenic,jz4740-watchdog"; + reg = <0x10002000 0x100>; +}; diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt new file mode 100644 index 000000000000..af9eb5b8a253 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -0,0 +1,13 @@ +Mediatek SoCs Watchdog timer + +Required properties: + +- compatible : should be "mediatek,mt6589-wdt" +- reg : Specifies base physical address and size of the registers. + +Example: + +wdt: watchdog@010000000 { + compatible = "mediatek,mt6589-wdt"; + reg = <0x10000000 0x18>; +}; |