diff options
Diffstat (limited to 'arch/arm/boot/dts/am33xx-l4.dtsi')
-rw-r--r-- | arch/arm/boot/dts/am33xx-l4.dtsi | 360 |
1 files changed, 288 insertions, 72 deletions
diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 4e2986f0c604..7e50fe633d8a 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -1,5 +1,8 @@ &l4_wkup { /* 0x44c00000 */ - compatible = "ti,am33xx-l4-wkup", "simple-bus"; + compatible = "ti,am33xx-l4-wkup", "simple-pm-bus"; + power-domains = <&prm_wkup>; + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>; + clock-names = "fck"; reg = <0x44c00000 0x800>, <0x44c00800 0x800>, <0x44c01000 0x400>, @@ -12,7 +15,7 @@ <0x00200000 0x44e00000 0x100000>; /* segment 2 */ segment@0 { /* 0x44c00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -22,7 +25,7 @@ }; segment@100000 { /* 0x44d00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */ @@ -34,23 +37,27 @@ compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x0 0x4>; reg-names = "rev"; + clocks = <&l4_wkup_aon_clkctrl AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>; + clock-names = "fck"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x0 0x0 0x4000>; - status = "disabled"; - }; + ranges = <0x00000000 0x00000000 0x4000>, + <0x00080000 0x00080000 0x2000>; - target-module@80000 { /* 0x44d80000, ap 6 10.0 */ - compatible = "ti,sysc"; - status = "disabled"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x80000 0x2000>; + wkup_m3: cpu@0 { + compatible = "ti,am3352-wkup-m3"; + reg = <0x00000000 0x4000>, + <0x00080000 0x2000>; + reg-names = "umem", "dmem"; + resets = <&prm_wkup 3>; + reset-names = "rstctrl"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; }; }; segment@200000 { /* 0x44e00000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00200000 0x002000>, /* ap 8 */ @@ -151,6 +158,18 @@ gpio0: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 82 8>, + <&am33xx_pinmux 8 52 4>, + <&am33xx_pinmux 12 94 4>, + <&am33xx_pinmux 16 71 2>, + <&am33xx_pinmux 18 135 1>, + <&am33xx_pinmux 19 108 2>, + <&am33xx_pinmux 21 73 1>, + <&am33xx_pinmux 22 8 2>, + <&am33xx_pinmux 26 10 2>, + <&am33xx_pinmux 28 74 1>, + <&am33xx_pinmux 29 81 1>, + <&am33xx_pinmux 30 28 2>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -240,28 +259,33 @@ ranges = <0x00000000 0x0000d000 0x00001000>, <0x00001000 0x0000e000 0x00001000>; - tscadc: tscadc@0 { - compatible = "ti,am3359-tscadc"; - reg = <0x0 0x1000>; - interrupts = <16>; - status = "disabled"; - dmas = <&edma 53 0>, <&edma 57 0>; - dma-names = "fifo0", "fifo1"; + tscadc: tscadc@0 { + compatible = "ti,am3359-tscadc"; + reg = <0x0 0x1000>; + interrupts = <16>; + clocks = <&adc_tsc_fck>; + clock-names = "fck"; + status = "disabled"; + dmas = <&edma 53 0>, <&edma 57 0>; + dma-names = "fifo0", "fifo1"; - tsc { - compatible = "ti,am3359-tsc"; - }; - am335x_adc: adc { - #io-channel-cells = <1>; - compatible = "ti,am3359-adc"; - }; + tsc { + compatible = "ti,am3359-tsc"; + }; + am335x_adc: adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; }; + }; }; target-module@10000 { /* 0x44e10000, ap 22 0c.0 */ compatible = "ti,sysc-omap4", "ti,sysc"; reg = <0x10000 0x4>; reg-names = "rev"; + clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_CONTROL_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00010000 0x00010000>, @@ -278,7 +302,7 @@ am33xx_pinmux: pinmux@800 { compatible = "pinctrl-single"; reg = <0x800 0x238>; - #pinctrl-cells = <1>; + #pinctrl-cells = <2>; pinctrl-single,register-width = <32>; pinctrl-single,function-mask = <0x7f>; }; @@ -330,9 +354,8 @@ }; }; - target-module@31000 { /* 0x44e31000, ap 25 40.0 */ + timer1_target: target-module@31000 { /* 0x44e31000, ap 25 40.0 */ compatible = "ti,sysc-omap2-timer", "ti,sysc"; - ti,hwmods = "timer1"; reg = <0x31000 0x4>, <0x31010 0x4>, <0x31014 0x4>; @@ -414,7 +437,6 @@ target-module@3e000 { /* 0x44e3e000, ap 35 60.0 */ compatible = "ti,sysc-omap4-simple", "ti,sysc"; - ti,hwmods = "rtc"; reg = <0x3e074 0x4>, <0x3e078 0x4>; reg-names = "rev", "sysc"; @@ -423,6 +445,7 @@ <SYSC_IDLE_SMART>, <SYSC_IDLE_SMART_WKUP>; /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */ + power-domains = <&prm_rtc>; clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>; clock-names = "fck"; #address-cells = <1>; @@ -648,7 +671,10 @@ }; &l4_fast { /* 0x4a000000 */ - compatible = "ti,am33xx-l4-fast", "simple-bus"; + compatible = "ti,am33xx-l4-fast", "simple-pm-bus"; + power-domains = <&prm_per>; + clocks = <&l4hs_clkctrl AM3_L4HS_L4_HS_CLKCTRL 0>; + clock-names = "fck"; reg = <0x4a000000 0x800>, <0x4a000800 0x800>, <0x4a001000 0x400>; @@ -658,7 +684,7 @@ ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */ segment@0 { /* 0x4a000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -741,6 +767,55 @@ phys = <&phy_gmii_sel 2 1>; }; }; + + mac_sw: switch@0 { + compatible = "ti,am335x-cpsw-switch", "ti,cpsw-switch"; + reg = <0x0 0x4000>; + ranges = <0 0 0x4000>; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + syscon = <&scm_conf>; + status = "disabled"; + + interrupts = <40 41 42 43>; + interrupt-names = "rx_thresh", "rx", "tx", "misc"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + + cpsw_port1: port@1 { + reg = <1>; + label = "port1"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 1 1>; + }; + + cpsw_port2: port@2 { + reg = <2>; + label = "port2"; + mac-address = [ 00 00 00 00 00 00 ]; + phys = <&phy_gmii_sel 2 1>; + }; + }; + + davinci_mdio_sw: mdio@1000 { + compatible = "ti,cpsw-mdio","ti,davinci_mdio"; + clocks = <&cpsw_125mhz_gclk>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <0>; + bus_freq = <1000000>; + reg = <0x1000 0x100>; + }; + + cpts { + clocks = <&cpsw_cpts_rft_clk>; + clock-names = "cpts"; + }; + }; }; target-module@180000 { /* 0x4a180000, ap 5 10.0 */ @@ -759,12 +834,109 @@ ranges = <0x0 0x200000 0x80000>; }; - target-module@300000 { /* 0x4a300000, ap 9 04.0 */ - compatible = "ti,sysc"; - status = "disabled"; + pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */ + compatible = "ti,sysc-pruss", "ti,sysc"; + reg = <0x326000 0x4>, + <0x326004 0x4>; + reg-names = "rev", "sysc"; + ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT | + SYSC_PRUSS_SUB_MWAIT)>; + ti,sysc-midle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + ti,sysc-sidle = <SYSC_IDLE_FORCE>, + <SYSC_IDLE_NO>, + <SYSC_IDLE_SMART>; + clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>; + clock-names = "fck"; + resets = <&prm_per 1>; + reset-names = "rstctrl"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x300000 0x80000>; + status = "disabled"; + + pruss: pruss@0 { + compatible = "ti,am3356-pruss"; + reg = <0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pruss_mem: memories@0 { + reg = <0x0 0x2000>, + <0x2000 0x2000>, + <0x10000 0x3000>; + reg-names = "dram0", "dram1", + "shrdram2"; + }; + + pruss_cfg: cfg@26000 { + compatible = "ti,pruss-cfg", "syscon"; + reg = <0x26000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x26000 0x2000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + pruss_iepclk_mux: iepclk-mux@30 { + reg = <0x30>; + #clock-cells = <0>; + clocks = <&l3_gclk>, /* icss_iep_gclk */ + <&pruss_ocp_gclk>; /* icss_ocp_gclk */ + }; + }; + }; + + pruss_mii_rt: mii-rt@32000 { + compatible = "ti,pruss-mii", "syscon"; + reg = <0x32000 0x58>; + }; + + pruss_intc: interrupt-controller@20000 { + compatible = "ti,pruss-intc"; + reg = <0x20000 0x2000>; + interrupts = <20 21 22 23 24 25 26 27>; + interrupt-names = "host_intr0", "host_intr1", + "host_intr2", "host_intr3", + "host_intr4", "host_intr5", + "host_intr6", "host_intr7"; + interrupt-controller; + #interrupt-cells = <3>; + }; + + pru0: pru@34000 { + compatible = "ti,am3356-pru"; + reg = <0x34000 0x2000>, + <0x22000 0x400>, + <0x22400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am335x-pru0-fw"; + }; + + pru1: pru@38000 { + compatible = "ti,am3356-pru"; + reg = <0x38000 0x2000>, + <0x24000 0x400>, + <0x24400 0x100>; + reg-names = "iram", "control", "debug"; + firmware-name = "am335x-pru1-fw"; + }; + + pruss_mdio: mdio@32400 { + compatible = "ti,davinci_mdio"; + reg = <0x32400 0x90>; + clocks = <&dpll_core_m4_ck>; + clock-names = "fck"; + bus_freq = <1000000>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + }; }; }; }; @@ -812,7 +984,10 @@ }; &l4_per { /* 0x48000000 */ - compatible = "ti,am33xx-l4-per", "simple-bus"; + compatible = "ti,am33xx-l4-per", "simple-pm-bus"; + power-domains = <&prm_per>; + clocks = <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>; + clock-names = "fck"; reg = <0x48000000 0x800>, <0x48000800 0x800>, <0x48001000 0x400>, @@ -830,7 +1005,7 @@ <0x46400000 0x46400000 0x400000>; /* l3 data port */ segment@0 { /* 0x48000000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */ @@ -1102,9 +1277,8 @@ }; }; - target-module@40000 { /* 0x48040000, ap 22 1e.0 */ + timer2_target: target-module@40000 { /* 0x48040000, ap 22 1e.0 */ compatible = "ti,sysc-omap4-timer", "ti,sysc"; - ti,hwmods = "timer2"; reg = <0x40000 0x4>, <0x40010 0x4>, <0x40014 0x4>; @@ -1283,6 +1457,10 @@ gpio1: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 0 8>, + <&am33xx_pinmux 8 90 4>, + <&am33xx_pinmux 12 12 16>, + <&am33xx_pinmux 28 30 4>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1322,12 +1500,9 @@ ranges = <0x0 0x60000 0x1000>; mmc1: mmc@0 { - compatible = "ti,omap4-hsmmc"; - ti,dual-volt; + compatible = "ti,am335-sdhci"; ti,needs-special-reset; - ti,needs-special-hs-handling; - dmas = <&edma_xbar 24 0 0 - &edma_xbar 25 0 0>; + dmas = <&edma 24 0>, <&edma 25 0>; dma-names = "tx", "rx"; interrupts = <64>; reg = <0x0 0x1000>; @@ -1394,7 +1569,7 @@ #mbox-cells = <1>; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; - mbox_wkupm3: wkup_m3 { + mbox_wkupm3: mbox-wkup-m3 { ti,mbox-send-noirq; ti,mbox-tx = <0 0 0>; ti,mbox-rx = <0 0 3>; @@ -1440,7 +1615,7 @@ }; segment@100000 { /* 0x48100000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 42 */ @@ -1685,6 +1860,9 @@ gpio2: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 34 18>, + <&am33xx_pinmux 18 77 4>, + <&am33xx_pinmux 22 56 10>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1694,7 +1872,7 @@ }; }; - target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ + gpio3_target: target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */ compatible = "ti,sysc-omap2", "ti,sysc"; reg = <0xae000 0x4>, <0xae010 0x4>, @@ -1718,6 +1896,11 @@ gpio3: gpio@0 { compatible = "ti,omap4-gpio"; + gpio-ranges = <&am33xx_pinmux 0 66 5>, + <&am33xx_pinmux 5 98 2>, + <&am33xx_pinmux 7 75 2>, + <&am33xx_pinmux 13 141 1>, + <&am33xx_pinmux 14 100 8>; gpio-controller; #gpio-cells = <2>; interrupt-controller; @@ -1803,7 +1986,7 @@ ranges = <0x0 0xd8000 0x1000>; mmc2: mmc@0 { - compatible = "ti,omap4-hsmmc"; + compatible = "ti,am335-sdhci"; ti,needs-special-reset; dmas = <&edma 2 0 &edma 3 0>; @@ -1816,13 +1999,31 @@ }; segment@200000 { /* 0x48200000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; + ranges = <0x00000000 0x00200000 0x010000>; + + target-module@0 { + compatible = "ti,sysc-omap4-simple", "ti,sysc"; + power-domains = <&prm_mpu>; + clocks = <&mpu_clkctrl AM3_MPU_MPU_CLKCTRL 0>; + clock-names = "fck"; + ti,no-idle; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0x10000>; + + mpu@0 { + compatible = "ti,omap3-mpu"; + pm-sram = <&pm_sram_code + &pm_sram_data>; + }; + }; }; segment@300000 { /* 0x48300000 */ - compatible = "simple-bus"; + compatible = "simple-pm-bus"; #address-cells = <1>; #size-cells = <1>; ranges = <0x00000000 0x00300000 0x001000>, /* ap 66 */ @@ -1877,21 +2078,26 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap0: ecap@100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; + ecap0: pwm@100 { + compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; clock-names = "fck"; - interrupts = <31>; - interrupt-names = "ecap0"; + status = "disabled"; + }; + + eqep0: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <79>; status = "disabled"; }; ehrpwm0: pwm@200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>; @@ -1929,21 +2135,26 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap1: ecap@100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; + ecap1: pwm@100 { + compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; clock-names = "fck"; - interrupts = <47>; - interrupt-names = "ecap1"; + status = "disabled"; + }; + + eqep1: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <88>; status = "disabled"; }; ehrpwm1: pwm@200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>; @@ -1981,21 +2192,26 @@ status = "disabled"; ranges = <0 0 0x1000>; - ecap2: ecap@100 { - compatible = "ti,am3352-ecap", - "ti,am33xx-ecap"; + ecap2: pwm@100 { + compatible = "ti,am3352-ecap"; #pwm-cells = <3>; reg = <0x100 0x80>; clocks = <&l4ls_gclk>; clock-names = "fck"; - interrupts = <61>; - interrupt-names = "ecap2"; + status = "disabled"; + }; + + eqep2: counter@180 { + compatible = "ti,am3352-eqep"; + reg = <0x180 0x80>; + clocks = <&l4ls_gclk>; + clock-names = "sysclkout"; + interrupts = <89>; status = "disabled"; }; ehrpwm2: pwm@200 { - compatible = "ti,am3352-ehrpwm", - "ti,am33xx-ehrpwm"; + compatible = "ti,am3352-ehrpwm"; #pwm-cells = <3>; reg = <0x200 0x80>; clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>; |