diff options
Diffstat (limited to 'arch/arm/boot/dts/am3517-evm.dts')
| -rw-r--r-- | arch/arm/boot/dts/am3517-evm.dts | 63 |
1 files changed, 49 insertions, 14 deletions
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 0d2fac98ce7d..35b653014f2b 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -37,55 +37,55 @@ compatible = "gpio-keys-polled"; poll-interval = <100>; - user_pb { + button-user { label = "User Push Button"; linux,code = <BTN_0>; gpios = <&tca6416 5 GPIO_ACTIVE_LOW>; }; - user_sw_1 { + switch-1 { label = "User Switch 1"; linux,code = <BTN_1>; gpios = <&tca6416 8 GPIO_ACTIVE_LOW>; }; - user_sw_2 { + switch-2 { label = "User Switch 2"; linux,code = <BTN_2>; gpios = <&tca6416 9 GPIO_ACTIVE_LOW>; }; - user_sw_3 { + switch-3 { label = "User Switch 3"; linux,code = <BTN_3>; gpios = <&tca6416 10 GPIO_ACTIVE_LOW>; }; - user_sw_4 { + switch-4 { label = "User Switch 4"; linux,code = <BTN_4>; gpios = <&tca6416 11 GPIO_ACTIVE_LOW>; }; - user_sw_5 { + switch-5 { label = "User Switch 5"; linux,code = <BTN_5>; gpios = <&tca6416 12 GPIO_ACTIVE_LOW>; }; - user_sw_6 { + switch-6 { label = "User Switch 6"; linux,code = <BTN_6>; gpios = <&tca6416 13 GPIO_ACTIVE_LOW>; }; - user_sw_7 { + switch-7 { label = "User Switch 7"; linux,code = <BTN_7>; gpios = <&tca6416 14 GPIO_ACTIVE_LOW>; }; - user_sw_8 { + switch-8 { label = "User Switch 8"; linux,code = <BTN_8>; gpios = <&tca6416 15 GPIO_ACTIVE_LOW>; @@ -161,6 +161,8 @@ /* HS USB Host PHY on PORT 1 */ hsusb1_phy: hsusb1_phy { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_rst_pins>; compatible = "usb-nop-xceiv"; reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */ #phy-cells = <0>; @@ -168,7 +170,9 @@ }; &davinci_emac { - status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; + status = "okay"; }; &davinci_mdio { @@ -193,6 +197,8 @@ }; &i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; /* User DIP swithes [1:8] / User LEDS [1:2] */ tca6416: gpio@21 { @@ -205,6 +211,8 @@ }; &i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_pins>; clock-frequency = <400000>; }; @@ -223,6 +231,8 @@ }; &usbhshost { + pinctrl-names = "default"; + pinctrl-0 = <&hsusb1_pins>; port1-mode = "ehci-phy"; }; @@ -231,8 +241,35 @@ }; &omap3_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_rst_pins>; + + ethernet_pins: pinmux_ethernet_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */ + OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */ + OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */ + OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */ + OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */ + OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */ + OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */ + OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */ + OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */ + OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */ + >; + }; + + i2c2_pins: pinmux_i2c2_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */ + OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */ + >; + }; + + i2c3_pins: pinmux_i2c3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */ + >; + }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < @@ -300,8 +337,6 @@ }; &omap3_pmx_core2 { - pinctrl-names = "default"; - pinctrl-0 = <&hsusb1_pins>; hsusb1_pins: pinmux_hsusb1_pins { pinctrl-single,pins = < |