diff options
Diffstat (limited to 'arch/arm/boot/dts/am437x-gp-evm.dts')
| -rw-r--r-- | arch/arm/boot/dts/am437x-gp-evm.dts | 65 |
1 files changed, 36 insertions, 29 deletions
diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 811c8cae315b..46d5361fe876 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/ */ /* AM437x GP EVM */ @@ -91,22 +91,6 @@ backlight = <&lcd_bl>; - panel-timing { - clock-frequency = <33000000>; - hactive = <800>; - vactive = <480>; - hfront-porch = <210>; - hback-porch = <16>; - hsync-len = <30>; - vback-porch = <10>; - vfront-porch = <22>; - vsync-len = <13>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; @@ -791,6 +775,14 @@ }; }; +&magadc { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + &ecap0 { status = "okay"; pinctrl-names = "default"; @@ -802,7 +794,7 @@ pinctrl-0 = <&gpio0_pins>; status = "okay"; - p23 { + sel-emmc-nand-hog { gpio-hog; gpios = <23 GPIO_ACTIVE_HIGH>; /* SelEMMCorNAND selects between eMMC and NAND: @@ -829,13 +821,16 @@ status = "okay"; }; +&gpio5_target { + ti,no-reset-on-init; +}; + &gpio5 { pinctrl-names = "default"; pinctrl-0 = <&display_mux_pins>; status = "okay"; - ti,no-reset-on-init; - p8 { + sel-lcd-hdmi-hog { /* * SelLCDorHDMI selects between display and audio paths: * Low: HDMI display with audio via HDMI @@ -869,7 +864,7 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&emmc_pins_default>; pinctrl-1 = <&emmc_pins_sleep>; - ti,non-removable; + non-removable; }; &mmc3 { @@ -886,7 +881,7 @@ pinctrl-1 = <&mmc3_pins_sleep>; cap-power-off-card; keep-power-in-suspend; - ti,non-removable; + non-removable; #address-cells = <1>; #size-cells = <0>; @@ -922,28 +917,31 @@ status = "okay"; }; -&mac { - slaves = <1>; +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@0 { reg = <0>; }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; + ti,dual-emac-pvid = <1>; +}; + +&cpsw_port2 { + status = "disabled"; }; &elm { @@ -1040,7 +1038,7 @@ }; &dss { - status = "ok"; + status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&dss_pins>; @@ -1128,3 +1126,12 @@ &cpu { cpu0-supply = <&dcdc2>; }; + +&wkup_m3_ipc { + ti,set-io-isolation; + firmware-name = "am43x-evm-scale-data.bin"; +}; + +&pruss1_mdio { + status = "disabled"; +}; |