diff options
Diffstat (limited to 'arch/arm/boot/dts/am437x-sk-evm.dts')
-rw-r--r-- | arch/arm/boot/dts/am437x-sk-evm.dts | 48 |
1 files changed, 19 insertions, 29 deletions
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 25222497f828..036f3831dc26 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2014 Texas Instruments Incorporated - https://www.ti.com/ */ /* AM437x SK EVM */ @@ -134,22 +134,6 @@ enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; - panel-timing { - clock-frequency = <9000000>; - hactive = <480>; - vactive = <272>; - hfront-porch = <2>; - hback-porch = <2>; - hsync-len = <41>; - vfront-porch = <2>; - vback-porch = <2>; - vsync-len = <10>; - hsync-active = <0>; - vsync-active = <0>; - de-active = <1>; - pixelclk-active = <1>; - }; - port { lcd_in: endpoint { remote-endpoint = <&dpi_out>; @@ -719,7 +703,7 @@ pinctrl-1 = <&mmc3_pins_sleep>; cap-power-off-card; keep-power-in-suspend; - ti,non-removable; + non-removable; #address-cells = <1>; #size-cells = <0>; @@ -762,7 +746,7 @@ pinctrl-0 = <&qspi_pins>; spi-max-frequency = <48000000>; - m25p80@0 { + flash@0 { compatible = "mx66l51235l"; spi-max-frequency = <48000000>; reg = <0>; @@ -808,19 +792,17 @@ }; }; -&mac { +&mac_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; - dual_emac = <1>; status = "okay"; }; -&davinci_mdio { +&davinci_mdio_sw { pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - status = "okay"; ethphy0: ethernet-phy@4 { reg = <4>; @@ -831,16 +813,16 @@ }; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <ðphy0>; - phy-mode = "rgmii"; - dual_emac_res_vlan = <1>; + phy-mode = "rgmii-rxid"; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <ðphy1>; - phy-mode = "rgmii"; - dual_emac_res_vlan = <2>; + phy-mode = "rgmii-rxid"; + ti,dual-emac-pvid = <2>; }; &elm { @@ -910,3 +892,11 @@ }; }; }; + +&wkup_m3_ipc { + firmware-name = "am43x-evm-scale-data.bin"; +}; + +&pruss1_mdio { + status = "disabled"; +}; |