diff options
Diffstat (limited to 'arch/arm/boot/dts/at91sam9263.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/at91sam9263.dtsi | 22 |
1 files changed, 16 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 5c990cfae254..3ce9ea987312 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/clock/at91.h> +#include <dt-bindings/mfd/at91-usart.h> / { #address-cells = <1>; @@ -35,16 +36,17 @@ }; cpus { - #address-cells = <0>; + #address-cells = <1>; #size-cells = <0>; - cpu { + cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; + reg = <0>; }; }; - memory { + memory@20000000 { device_type = "memory"; reg = <0x20000000 0x08000000>; }; @@ -66,11 +68,17 @@ sram0: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x14000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00300000 0x14000>; }; sram1: sram@500000 { compatible = "mmio-sram"; reg = <0x00500000 0x4000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x00500000 0x4000>; }; ahb { @@ -144,7 +152,7 @@ clock-names = "t0_clk", "slow_clk"; }; - rstc@fffffd00 { + reset-controller@fffffd00 { compatible = "atmel,at91sam9260-rstc"; reg = <0xfffffd00 0x10>; clocks = <&slow_xtal>; @@ -533,6 +541,7 @@ dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; @@ -544,6 +553,7 @@ usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -557,6 +567,7 @@ usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -570,6 +581,7 @@ usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; + atmel,usart-mode = <AT91_USART_MODE_SERIAL>; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; @@ -647,7 +659,6 @@ compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; @@ -659,7 +670,6 @@ compatible = "atmel,hsmci"; reg = <0xfff84000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; - pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; |