diff options
Diffstat (limited to 'arch/arm/boot/dts/bcm283x.dtsi')
-rw-r--r-- | arch/arm/boot/dts/bcm283x.dtsi | 82 |
1 files changed, 70 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index a3106aa446c6..561f27d8d922 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -93,10 +93,13 @@ #clock-cells = <1>; reg = <0x7e101000 0x2000>; - /* CPRMAN derives everything from the platform's - * oscillator. + /* CPRMAN derives almost everything from the + * platform's oscillator. However, the DSI + * pixel clocks come from the DSI analog PHY. */ - clocks = <&clk_osc>; + clocks = <&clk_osc>, + <&dsi0 0>, <&dsi0 1>, <&dsi0 2>, + <&dsi1 0>, <&dsi1 1>, <&dsi1 2>; }; rng@7e104000 { @@ -195,8 +198,8 @@ brcm,pins = <0 1>; brcm,function = <BCM2835_FSEL_ALT0>; }; - i2c0_gpio32: i2c0_gpio32 { - brcm,pins = <32 34>; + i2c0_gpio28: i2c0_gpio28 { + brcm,pins = <28 29>; brcm,function = <BCM2835_FSEL_ALT0>; }; i2c0_gpio44: i2c0_gpio44 { @@ -292,20 +295,28 @@ /* Separate from the uart0_gpio14 group * because it conflicts with spi1_gpio16, and * people often run uart0 on the two pins - * without flow contrl. + * without flow control. */ uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 { brcm,pins = <16 17>; brcm,function = <BCM2835_FSEL_ALT3>; }; - uart0_gpio30: uart0_gpio30 { + uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 { brcm,pins = <30 31>; brcm,function = <BCM2835_FSEL_ALT3>; }; - uart0_ctsrts_gpio32: uart0_ctsrts_gpio32 { + uart0_gpio32: uart0_gpio32 { brcm,pins = <32 33>; brcm,function = <BCM2835_FSEL_ALT3>; }; + uart0_gpio36: uart0_gpio36 { + brcm,pins = <36 37>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; + uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 { + brcm,pins = <38 39>; + brcm,function = <BCM2835_FSEL_ALT2>; + }; uart1_gpio14: uart1_gpio14 { brcm,pins = <14 15>; @@ -323,10 +334,6 @@ brcm,pins = <30 31>; brcm,function = <BCM2835_FSEL_ALT5>; }; - uart1_gpio36: uart1_gpio36 { - brcm,pins = <36 37 38 39>; - brcm,function = <BCM2835_FSEL_ALT2>; - }; uart1_gpio40: uart1_gpio40 { brcm,pins = <40 41>; brcm,function = <BCM2835_FSEL_ALT5>; @@ -347,6 +354,16 @@ arm,primecell-periphid = <0x00241011>; }; + sdhost: mmc@7e202000 { + compatible = "brcm,bcm2835-sdhost"; + reg = <0x7e202000 0x100>; + interrupts = <2 24>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + dmas = <&dma 13>; + dma-names = "rx-tx"; + status = "disabled"; + }; + i2s: i2s@7e203000 { compatible = "brcm,bcm2835-i2s"; reg = <0x7e203000 0x20>, @@ -390,6 +407,25 @@ interrupts = <2 14>; /* pwa1 */ }; + dsi0: dsi@7e209000 { + compatible = "brcm,bcm2835-dsi0"; + reg = <0x7e209000 0x78>; + interrupts = <2 4>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLA_DSI0>, + <&clocks BCM2835_CLOCK_DSI0E>, + <&clocks BCM2835_CLOCK_DSI0P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi0_byte", + "dsi0_ddr2", + "dsi0_ddr"; + + }; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; @@ -456,6 +492,26 @@ interrupts = <2 1>; }; + dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", + "dsi1_ddr2", + "dsi1_ddr"; + + status = "disabled"; + }; + i2c1: i2c@7e804000 { compatible = "brcm,bcm2835-i2c"; reg = <0x7e804000 0x1000>; @@ -499,6 +555,8 @@ clocks = <&clocks BCM2835_PLLH_PIX>, <&clocks BCM2835_CLOCK_HSM>; clock-names = "pixel", "hdmi"; + dmas = <&dma 17>; + dma-names = "audio-rx"; status = "disabled"; }; |