aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/dra7-l4.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/boot/dts/dra7-l4.dtsi')
-rw-r--r--arch/arm/boot/dts/dra7-l4.dtsi262
1 files changed, 106 insertions, 156 deletions
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index 2119a78e9c15..5733e3a4ea8e 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1,5 +1,8 @@
&l4_cfg { /* 0x4a000000 */
- compatible = "ti,dra7-l4-cfg", "simple-bus";
+ compatible = "ti,dra7-l4-cfg", "simple-pm-bus";
+ power-domains = <&prm_coreaon>;
+ clocks = <&l4cfg_clkctrl DRA7_L4CFG_L4_CFG_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4a000000 0x800>,
<0x4a000800 0x800>,
<0x4a001000 0x1000>;
@@ -11,7 +14,7 @@
<0x00200000 0x4a200000 0x100000>; /* segment 2 */
segment@0 { /* 0x4a000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
@@ -493,7 +496,7 @@
};
segment@100000 { /* 0x4a100000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00002000 0x00102000 0x001000>, /* ap 27 */
@@ -572,11 +575,33 @@
};
target-module@40000 { /* 0x4a140000, ap 31 06.0 */
- compatible = "ti,sysc";
- status = "disabled";
- #address-cells = <1>;
+ compatible = "ti,sysc-omap4", "ti,sysc";
+ reg = <0x400fc 4>,
+ <0x41100 4>;
+ reg-names = "rev", "sysc";
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ power-domains = <&prm_l3init>;
+ clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 0>;
+ clock-names = "fck";
#size-cells = <1>;
+ #address-cells = <1>;
ranges = <0x0 0x40000 0x10000>;
+
+ sata: sata@0 {
+ compatible = "snps,dwc-ahci";
+ reg = <0 0x1100>, <0x1100 0x8>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ clocks = <&l3init_clkctrl DRA7_L3INIT_SATA_CLKCTRL 8>;
+ ports-implemented = <0x1>;
+ };
};
target-module@51000 { /* 0x4a151000, ap 33 50.0 */
@@ -789,7 +814,7 @@
};
segment@200000 { /* 0x4a200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00018000 0x00218000 0x001000>, /* ap 43 */
@@ -1006,7 +1031,10 @@
};
&l4_per1 { /* 0x48000000 */
- compatible = "ti,dra7-l4-per1", "simple-bus";
+ compatible = "ti,dra7-l4-per1", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4per_clkctrl DRA7_L4PER_L4_PER1_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48000000 0x800>,
<0x48000800 0x800>,
<0x48001000 0x400>,
@@ -1020,7 +1048,7 @@
<0x00200000 0x48200000 0x200000>; /* segment 1 */
segment@0 { /* 0x48000000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
@@ -1131,7 +1159,7 @@
ranges = <0x0 0x20000 0x1000>;
uart3: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1143,7 +1171,6 @@
target-module@32000 { /* 0x48032000, ap 5 3e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer2";
reg = <0x32000 0x4>,
<0x32010 0x4>;
reg-names = "rev", "sysc";
@@ -1163,15 +1190,14 @@
timer2: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
};
};
- target-module@34000 { /* 0x48034000, ap 7 46.0 */
+ timer3_target: target-module@34000 { /* 0x48034000, ap 7 46.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer3";
reg = <0x34000 0x4>,
<0x34010 0x4>;
reg-names = "rev", "sysc";
@@ -1191,15 +1217,14 @@
timer3: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
};
};
- target-module@36000 { /* 0x48036000, ap 9 4e.0 */
+ timer4_target: target-module@36000 { /* 0x48036000, ap 9 4e.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer4";
reg = <0x36000 0x4>,
<0x36010 0x4>;
reg-names = "rev", "sysc";
@@ -1219,8 +1244,8 @@
timer4: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -1246,8 +1271,8 @@
timer9: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -1318,7 +1343,7 @@
};
};
- target-module@55000 { /* 0x48055000, ap 13 0e.0 */
+ gpio2_target: target-module@55000 { /* 0x48055000, ap 13 0e.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x55000 0x4>,
<0x55010 0x4>,
@@ -1351,7 +1376,7 @@
};
};
- target-module@57000 { /* 0x48057000, ap 15 06.0 */
+ gpio3_target: target-module@57000 { /* 0x48057000, ap 15 06.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
reg = <0x57000 0x4>,
<0x57010 0x4>,
@@ -1537,7 +1562,7 @@
ranges = <0x0 0x66000 0x1000>;
uart5: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1569,7 +1594,7 @@
ranges = <0x0 0x68000 0x1000>;
uart6: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1601,7 +1626,7 @@
ranges = <0x0 0x6a000 0x1000>;
uart1: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1633,7 +1658,7 @@
ranges = <0x0 0x6c000 0x1000>;
uart2: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1665,7 +1690,7 @@
ranges = <0x0 0x6e000 0x1000>;
uart4: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -1853,8 +1878,8 @@
timer10: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -1880,8 +1905,8 @@
timer11: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -2272,14 +2297,17 @@
};
segment@200000 { /* 0x48200000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
};
};
&l4_per2 { /* 0x48400000 */
- compatible = "ti,dra7-l4-per2", "simple-bus";
+ compatible = "ti,dra7-l4-per2", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4per2_clkctrl DRA7_L4PER2_L4_PER2_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48400000 0x800>,
<0x48400800 0x800>,
<0x48401000 0x400>,
@@ -2299,7 +2327,7 @@
<0x48454000 0x48454000 0x400000>; /* L3 data port */
segment@0 { /* 0x48400000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
@@ -2396,7 +2424,7 @@
ranges = <0x0 0x20000 0x1000>;
uart7: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2426,7 +2454,7 @@
ranges = <0x0 0x22000 0x1000>;
uart8: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2456,7 +2484,7 @@
ranges = <0x0 0x24000 0x1000>;
uart9: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -2533,7 +2561,7 @@
status = "disabled";
ranges = <0 0 0x1000>;
- ecap0: ecap@100 {
+ ecap0: pwm@100 {
compatible = "ti,dra746-ecap",
"ti,am3352-ecap";
#pwm-cells = <3>;
@@ -2579,7 +2607,7 @@
status = "disabled";
ranges = <0 0 0x1000>;
- ecap1: ecap@100 {
+ ecap1: pwm@100 {
compatible = "ti,dra746-ecap",
"ti,am3352-ecap";
#pwm-cells = <3>;
@@ -2625,7 +2653,7 @@
status = "disabled";
ranges = <0 0 0x1000>;
- ecap2: ecap@100 {
+ ecap2: pwm@100 {
compatible = "ti,dra746-ecap",
"ti,am3352-ecap";
#pwm-cells = <3>;
@@ -3041,60 +3069,6 @@
*/
ti,no-idle;
- mac: ethernet@0 {
- compatible = "ti,dra7-cpsw","ti,cpsw";
- clocks = <&gmac_main_clk>, <&gmac_clkctrl DRA7_GMAC_GMAC_CLKCTRL 25>;
- clock-names = "fck", "cpts";
- cpdma_channels = <8>;
- ale_entries = <1024>;
- bd_ram_size = <0x2000>;
- mac_control = <0x20>;
- slaves = <2>;
- active_slave = <0>;
- cpts_clock_mult = <0x784CFE14>;
- cpts_clock_shift = <29>;
- reg = <0x0 0x1000
- 0x1200 0x2e00>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- /*
- * rx_thresh_pend
- * rx_pend
- * tx_pend
- * misc_pend
- */
- interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
- ranges = <0 0 0x4000>;
- syscon = <&scm_conf>;
- status = "disabled";
-
- davinci_mdio: mdio@1000 {
- compatible = "ti,cpsw-mdio","ti,davinci_mdio";
- clocks = <&gmac_main_clk>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <0>;
- bus_freq = <1000000>;
- reg = <0x1000 0x100>;
- };
-
- cpsw_emac0: slave@200 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- phys = <&phy_gmii_sel 1>;
- };
-
- cpsw_emac1: slave@300 {
- /* Filled in by U-Boot */
- mac-address = [ 00 00 00 00 00 00 ];
- phys = <&phy_gmii_sel 2>;
- };
- };
-
mac_sw: switch@0 {
compatible = "ti,dra7-cpsw-switch","ti,cpsw-switch";
reg = <0x0 0x4000>;
@@ -3151,7 +3125,10 @@
};
&l4_per3 { /* 0x48800000 */
- compatible = "ti,dra7-l4-per3", "simple-bus";
+ compatible = "ti,dra7-l4-per3", "simple-pm-bus";
+ power-domains = <&prm_l4per>;
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_L4_PER3_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x48800000 0x800>,
<0x48800800 0x800>,
<0x48801000 0x400>,
@@ -3163,7 +3140,7 @@
ranges = <0x00000000 0x48800000 0x200000>; /* segment 0 */
segment@0 { /* 0x48800000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
@@ -3363,8 +3340,8 @@
timer5: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -3390,8 +3367,8 @@
timer6: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -3417,8 +3394,8 @@
timer7: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -3444,8 +3421,8 @@
timer8: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -3471,8 +3448,8 @@
timer13: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
@@ -3499,14 +3476,13 @@
timer14: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER14_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
};
-
- target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
+ timer15_target: target-module@2c000 { /* 0x4882c000, ap 17 02.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x2c000 0x4>,
<0x2c010 0x4>;
@@ -3527,14 +3503,14 @@
timer15: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
};
- target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
+ timer16_target: target-module@2e000 { /* 0x4882e000, ap 19 14.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
reg = <0x2e000 0x4>,
<0x2e010 0x4>;
@@ -3555,8 +3531,8 @@
timer16: timer@0 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x80>;
- clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
- clock-names = "fck";
+ clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>, <&timer_sys_clk_div>;
+ clock-names = "fck", "timer_sys_ck";
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
ti,timer-pwm;
};
@@ -3564,7 +3540,6 @@
rtctarget: target-module@38000 { /* 0x48838000, ap 29 12.0 */
compatible = "ti,sysc-omap4-simple", "ti,sysc";
- ti,hwmods = "rtcss";
reg = <0x38074 0x4>,
<0x38078 0x4>;
reg-names = "rev", "sysc";
@@ -4008,7 +3983,6 @@
target-module@80000 { /* 0x48880000, ap 83 0e.1 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "usb_otg_ss1";
reg = <0x80000 0x4>,
<0x80010 0x4>;
reg-names = "rev", "sysc";
@@ -4058,7 +4032,6 @@
target-module@c0000 { /* 0x488c0000, ap 79 06.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "usb_otg_ss2";
reg = <0xc0000 0x4>,
<0xc0010 0x4>;
reg-names = "rev", "sysc";
@@ -4109,7 +4082,6 @@
usb3_tm: target-module@100000 { /* 0x48900000, ap 85 04.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "usb_otg_ss3";
reg = <0x100000 0x4>,
<0x100010 0x4>;
reg-names = "rev", "sysc";
@@ -4156,29 +4128,6 @@
};
};
- usb4_tm: target-module@140000 { /* 0x48940000, ap 75 3c.0 */
- compatible = "ti,sysc-omap4", "ti,sysc";
- ti,hwmods = "usb_otg_ss4";
- reg = <0x140000 0x4>,
- <0x140010 0x4>;
- reg-names = "rev", "sysc";
- ti,sysc-mask = <SYSC_OMAP4_DMADISABLE>;
- ti,sysc-midle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- ti,sysc-sidle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>,
- <SYSC_IDLE_SMART_WKUP>;
- /* Domains (P, C): l3init_pwrdm, l3init_clkdm */
- clocks = <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS4_CLKCTRL 0>;
- clock-names = "fck";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0x0 0x140000 0x20000>;
- };
-
target-module@170000 { /* 0x48970000, ap 21 0a.0 */
compatible = "ti,sysc-omap4", "ti,sysc";
reg = <0x170010 0x4>;
@@ -4239,11 +4188,11 @@
reg = <0x1d0010 0x4>;
reg-names = "sysc";
ti,sysc-midle = <SYSC_IDLE_FORCE>,
- <SYSC_IDLE_NO>,
- <SYSC_IDLE_SMART>;
+ <SYSC_IDLE_NO>;
ti,sysc-sidle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
+ power-domains = <&prm_vpe>;
clocks = <&vpe_clkctrl DRA7_VPE_VPE_CLKCTRL 0>;
clock-names = "fck";
#address-cells = <1>;
@@ -4267,7 +4216,10 @@
};
&l4_wkup { /* 0x4ae00000 */
- compatible = "ti,dra7-l4-wkup", "simple-bus";
+ compatible = "ti,dra7-l4-wkup", "simple-pm-bus";
+ power-domains = <&prm_wkupaon>;
+ clocks = <&wkupaon_clkctrl DRA7_WKUPAON_L4_WKUP_CLKCTRL 0>;
+ clock-names = "fck";
reg = <0x4ae00000 0x800>,
<0x4ae00800 0x800>,
<0x4ae01000 0x1000>;
@@ -4280,7 +4232,7 @@
<0x00030000 0x4ae30000 0x010000>; /* segment 3 */
segment@0 { /* 0x4ae00000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
@@ -4295,7 +4247,6 @@
target-module@4000 { /* 0x4ae04000, ap 15 40.0 */
compatible = "ti,sysc-omap2", "ti,sysc";
- ti,hwmods = "counter_32k";
reg = <0x4000 0x4>,
<0x4010 0x4>;
reg-names = "rev", "sysc";
@@ -4358,7 +4309,7 @@
};
segment@10000 { /* 0x4ae10000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00000000 0x00010000 0x001000>, /* ap 5 */
@@ -4430,9 +4381,8 @@
};
};
- target-module@8000 { /* 0x4ae18000, ap 9 30.0 */
+ timer1_target: target-module@8000 { /* 0x4ae18000, ap 9 30.0 */
compatible = "ti,sysc-omap4-timer", "ti,sysc";
- ti,hwmods = "timer1";
reg = <0x8000 0x4>,
<0x8010 0x4>;
reg-names = "rev", "sysc";
@@ -4469,7 +4419,7 @@
};
segment@20000 { /* 0x4ae20000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x00006000 0x00026000 0x001000>, /* ap 13 */
@@ -4557,7 +4507,7 @@
ranges = <0x0 0xb000 0x1000>;
uart10: serial@0 {
- compatible = "ti,dra742-uart", "ti,omap4-uart";
+ compatible = "ti,dra742-uart";
reg = <0x0 0x100>;
interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
@@ -4575,7 +4525,7 @@
};
segment@30000 { /* 0x4ae30000 */
- compatible = "simple-bus";
+ compatible = "simple-pm-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0000c000 0x0003c000 0x002000>, /* ap 30 */
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.