diff options
Diffstat (limited to 'arch/arm/boot/dts/dra71-evm.dts')
-rw-r--r-- | arch/arm/boot/dts/dra71-evm.dts | 62 |
1 files changed, 53 insertions, 9 deletions
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts index fabeb7704753..a64364443031 100644 --- a/arch/arm/boot/dts/dra71-evm.dts +++ b/arch/arm/boot/dts/dra71-evm.dts @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2016 Texas Instruments Incorporated - https://www.ti.com/ */ #include "dra71x.dtsi" @@ -17,6 +17,33 @@ reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipu2_memory_region: ipu2-memory@95800000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x95800000 0x0 0x3800000>; + reusable; + status = "okay"; + }; + + dsp1_memory_region: dsp1-memory@99000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x99000000 0x0 0x4000000>; + reusable; + status = "okay"; + }; + + ipu1_memory_region: ipu1-memory@9d000000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x9d000000 0x0 0x2000000>; + reusable; + status = "okay"; + }; + }; + vpo_sd_1v8_3v3: gpio-regulator-TPS74801 { compatible = "regulator-gpio"; @@ -85,6 +112,8 @@ regulator-name = "lp8733-ldo0"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; }; lp8733_ldo1_reg: ldo1 { @@ -158,7 +187,7 @@ }; &pcf_hdmi { - p0 { + hdmi-i2c-disable-hog { /* * PM_OEn to High: Disable routing I2C3 to PM_I2C * With this PM_SEL(p3) should not matter @@ -192,26 +221,26 @@ vqmmc-supply = <&evm_1v8_sw>; }; -&mac { +&mac_sw { mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>, <&pcf_hdmi 9 GPIO_ACTIVE_LOW>, /* P11 */ <&pcf_hdmi 10 GPIO_ACTIVE_LOW>; /* P12 */ - dual_emac; + status = "okay"; }; -&cpsw_emac0 { +&cpsw_port1 { phy-handle = <&dp83867_0>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <1>; + ti,dual-emac-pvid = <1>; }; -&cpsw_emac1 { +&cpsw_port2 { phy-handle = <&dp83867_1>; phy-mode = "rgmii-id"; - dual_emac_res_vlan = <2>; + ti,dual-emac-pvid = <2>; }; -&davinci_mdio { +&davinci_mdio_sw { dp83867_0: ethernet-phy@2 { reg = <2>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; @@ -270,3 +299,18 @@ &extcon_usb2 { vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>; }; + +&ipu2 { + status = "okay"; + memory-region = <&ipu2_memory_region>; +}; + +&ipu1 { + status = "okay"; + memory-region = <&ipu1_memory_region>; +}; + +&dsp1 { + status = "okay"; + memory-region = <&dsp1_memory_region>; +}; |