diff options
Diffstat (limited to 'arch/arm/boot/dts/imx6q-apalis-ixora.dts')
| -rw-r--r-- | arch/arm/boot/dts/imx6q-apalis-ixora.dts | 113 |
1 files changed, 9 insertions, 104 deletions
diff --git a/arch/arm/boot/dts/imx6q-apalis-ixora.dts b/arch/arm/boot/dts/imx6q-apalis-ixora.dts index 62e72773e53b..ce39c6a3f640 100644 --- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts +++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts @@ -1,6 +1,6 @@ -// SPDX-License-Identifier: GPL-2.0+ OR MIT +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT /* - * Copyright 2014-2020 Toradex + * Copyright 2014-2022 Toradex * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. */ @@ -30,95 +30,33 @@ stdout-path = "serial0:115200n8"; }; - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_keys>; - - wakeup { - label = "Wake-Up"; - gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; - linux,code = <KEY_WAKEUP>; - debounce-interval = <10>; - wakeup-source; - }; - }; - - lcd_display: disp0 { - compatible = "fsl,imx-parallel-display"; - #address-cells = <1>; - #size-cells = <0>; - interface-pix-fmt = "rgb24"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_ipu1_lcdif>; - status = "okay"; - - port@0 { - reg = <0>; - - lcd_display_in: endpoint { - remote-endpoint = <&ipu1_di1_disp1>; - }; - }; - - port@1 { - reg = <1>; - - lcd_display_out: endpoint { - remote-endpoint = <&lcd_panel_in>; - }; - }; - }; - - panel: panel { - /* - * edt,et057090dhu: EDT 5.7" LCD TFT - * edt,et070080dh6: EDT 7.0" LCD TFT - */ - compatible = "edt,et057090dhu"; - backlight = <&backlight>; - - port { - lcd_panel_in: endpoint { - remote-endpoint = <&lcd_display_out>; - }; - }; - }; - leds { compatible = "gpio-leds"; - pinctrl-names = "default"; pinctrl-0 = <&pinctrl_leds_ixora>; led4-green { - label = "LED_4_GREEN"; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + label = "LED_4_GREEN"; }; led4-red { - label = "LED_4_RED"; gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + label = "LED_4_RED"; }; led5-green { - label = "LED_5_GREEN"; gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + label = "LED_5_GREEN"; }; led5-red { - label = "LED_5_RED"; gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + label = "LED_5_RED"; }; }; }; -&backlight { - brightness-levels = <0 127 191 223 239 247 251 255>; - default-brightness-level = <1>; - status = "okay"; -}; - &can1 { status = "okay"; }; @@ -127,27 +65,10 @@ status = "okay"; }; -&hdmi { - status = "okay"; -}; - /* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */ &i2c1 { status = "okay"; - /* - * Touchscreen is using SODIMM 28/30, also used for PWM<B>, PWM<C>, - * aka pwm2, pwm3. so if you enable touchscreen, disable the pwms - */ - touchscreen@4a { - compatible = "atmel,maxtouch"; - reg = <0x4a>; - interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio6 9 GPIO_ACTIVE_LOW>; /* SODIMM 13 */ - status = "disabled"; - }; - eeprom@50 { compatible = "atmel,24c02"; reg = <0x50>; @@ -168,14 +89,6 @@ status = "okay"; }; -&ipu1_di1_disp1 { - remote-endpoint = <&lcd_display_in>; -}; - -&ldb { - status = "okay"; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reset_moci>; @@ -201,11 +114,11 @@ status = "okay"; }; -®_usb_otg_vbus { +®_usb_host_vbus { status = "okay"; }; -®_usb_host_vbus { +®_usb_otg_vbus { status = "okay"; }; @@ -249,21 +162,13 @@ /* SD1 */ &usdhc2 { + cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc2 &pinctrl_sd_cd>; - cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; status = "okay"; }; &iomuxc { - /* Mux the Apalis GPIOs */ - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2 - &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4 - &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6 - &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8 - >; - pinctrl_leds_ixora: ledsixoragrp { fsl,pins = < MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b0 |