diff options
Diffstat (limited to 'arch/arm/boot/dts/intel-ixp4xx.dtsi')
-rw-r--r-- | arch/arm/boot/dts/intel-ixp4xx.dtsi | 135 |
1 files changed, 134 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/intel-ixp4xx.dtsi b/arch/arm/boot/dts/intel-ixp4xx.dtsi index d4a09584f417..51a716c59669 100644 --- a/arch/arm/boot/dts/intel-ixp4xx.dtsi +++ b/arch/arm/boot/dts/intel-ixp4xx.dtsi @@ -14,12 +14,73 @@ compatible = "simple-bus"; interrupt-parent = <&intcon>; + /* + * The IXP4xx expansion bus is a set of up to 7 each up to 16MB + * windows in the 256MB space from 0x50000000 to 0x5fffffff. + */ + bus@c4000000 { + /* compatible and reg filled in by per-soc device tree */ + native-endian; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0x0 0x50000000 0x01000000>, + <1 0x0 0x51000000 0x01000000>, + <2 0x0 0x52000000 0x01000000>, + <3 0x0 0x53000000 0x01000000>, + <4 0x0 0x54000000 0x01000000>, + <5 0x0 0x55000000 0x01000000>, + <6 0x0 0x56000000 0x01000000>, + <7 0x0 0x57000000 0x01000000>; + dma-ranges = <0 0x0 0x50000000 0x01000000>, + <1 0x0 0x51000000 0x01000000>, + <2 0x0 0x52000000 0x01000000>, + <3 0x0 0x53000000 0x01000000>, + <4 0x0 0x54000000 0x01000000>, + <5 0x0 0x55000000 0x01000000>, + <6 0x0 0x56000000 0x01000000>, + <7 0x0 0x57000000 0x01000000>; + }; + qmgr: queue-manager@60000000 { compatible = "intel,ixp4xx-ahb-queue-manager"; reg = <0x60000000 0x4000>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH>, <4 IRQ_TYPE_LEVEL_HIGH>; }; + pci@c0000000 { + /* compatible filled in by per-soc device tree */ + reg = <0xc0000000 0x1000>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, + <9 IRQ_TYPE_LEVEL_HIGH>, + <10 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x00 0xff>; + status = "disabled"; + + ranges = + /* + * 64MB 32bit non-prefetchable memory 0x48000000-0x4bffffff + * done in 4 chunks of 16MB each. + */ + <0x02000000 0 0x48000000 0x48000000 0 0x04000000>, + /* 64KB I/O space at 0x4c000000 */ + <0x01000000 0 0x00000000 0x4c000000 0 0x00010000>; + + /* + * This needs to map to the start of physical memory so + * PCI devices can see all (hopefully) memory. This is done + * using 4 1:1 16MB windows, so the RAM should not be more than + * 64 MB for this to work. If your memory is anywhere else + * than at 0x0 you need to alter this. + */ + dma-ranges = + <0x02000000 0 0x00000000 0x00000000 0 0x04000000>; + + /* Each unique DTS using PCI must specify the swizzling */ + }; + uart0: serial@c8000000 { compatible = "intel,xscale-uart"; reg = <0xc8000000 0x1000>; @@ -34,6 +95,20 @@ no-loopback-test; }; + uart1: serial@c8001000 { + compatible = "intel,xscale-uart"; + reg = <0xc8001000 0x1000>; + /* + * The reg-offset and reg-shift is a side effect + * of running the platform in big endian mode. + */ + reg-offset = <3>; + reg-shift = <2>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <14745600>; + no-loopback-test; + }; + gpio0: gpio@c8004000 { compatible = "intel,ixp4xx-gpio"; reg = <0xc8004000 0x1000>; @@ -61,9 +136,67 @@ interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; }; - npe@c8006000 { + npe: npe@c8006000 { compatible = "intel,ixp4xx-network-processing-engine"; reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + /* NPE-A contains two high-speed serial links */ + hss@0 { + compatible = "intel,ixp4xx-hss"; + reg = <0>; + intel,npe-handle = <&npe 0>; + status = "disabled"; + }; + + hss@1 { + compatible = "intel,ixp4xx-hss"; + reg = <1>; + intel,npe-handle = <&npe 0>; + status = "disabled"; + }; + + /* NPE-C contains a crypto accelerator */ + crypto { + compatible = "intel,ixp4xx-crypto"; + intel,npe-handle = <&npe 2>; + queue-rx = <&qmgr 30>; + queue-txready = <&qmgr 29>; + }; + }; + + /* This is known as EthB */ + ethernet@c8009000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc8009000 0x1000>; + status = "disabled"; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 3>; + queue-txready = <&qmgr 20>; + intel,npe-handle = <&npe 1>; + }; + + /* This is known as EthC */ + ethernet@c800a000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800a000 0x1000>; + status = "disabled"; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; + intel,npe-handle = <&npe 2>; + }; + + /* This is known as EthA */ + ethernet@c800c000 { + compatible = "intel,ixp4xx-ethernet"; + reg = <0xc800c000 0x1000>; + status = "disabled"; + intel,npe = <0>; + /* Dummy values that depend on firmware */ + queue-rx = <&qmgr 0>; + queue-txready = <&qmgr 0>; }; }; }; |