diff options
Diffstat (limited to 'arch/arm/boot/dts/meson.dtsi')
-rw-r--r-- | arch/arm/boot/dts/meson.dtsi | 62 |
1 files changed, 52 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 5d198309058a..8e3860d5d916 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -5,17 +5,16 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/sound/meson-aiu.h> / { #address-cells = <1>; #size-cells = <1>; interrupt-parent = <&gic>; - L2: l2-cache-controller@c4200000 { - compatible = "arm,pl310-cache"; - reg = <0xc4200000 0x1000>; - cache-unified; - cache-level = <2>; + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&saradc 8>; }; soc { @@ -38,6 +37,17 @@ reg = <0x4000 0x400>; }; + aiu: audio-controller@5400 { + compatible = "amlogic,aiu"; + #sound-dai-cells = <2>; + sound-name-prefix = "AIU"; + reg = <0x5400 0x2ac>; + interrupts = <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "i2s", "spdif"; + status = "disabled"; + }; + assist: assist@7c00 { compatible = "amlogic,meson-mx-assist", "syscon"; reg = <0x7c00 0x200>; @@ -49,14 +59,15 @@ }; uart_A: serial@84c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84c0 0x18>; interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>; + fifo-size = <128>; status = "disabled"; }; uart_B: serial@84dc { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x84dc 0x18>; interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -94,7 +105,7 @@ }; uart_C: serial@8700 { - compatible = "amlogic,meson6-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart"; reg = <0x8700 0x18>; interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -140,6 +151,13 @@ status = "disabled"; }; + sdhc: mmc@8e00 { + compatible = "amlogic,meson-mx-sdhc"; + reg = <0x8e00 0x42>; + interrupts = <GIC_SPI 78 IRQ_TYPE_EDGE_RISING>; + status = "disabled"; + }; + gpio_intc: interrupt-controller@9880 { compatible = "amlogic,meson-gpio-intc"; reg = <0x9880 0x10>; @@ -165,6 +183,13 @@ }; }; + L2: cache-controller@c4200000 { + compatible = "arm,pl310-cache"; + reg = <0xc4200000 0x1000>; + cache-unified; + cache-level = <2>; + }; + periph: bus@c4300000 { compatible = "simple-bus"; reg = <0xc4300000 0x10000>; @@ -188,15 +213,22 @@ #size-cells = <1>; ranges = <0x0 0xc8100000 0x100000>; + ao_arc_rproc: remoteproc@1c { + compatible = "amlogic,meson-mx-ao-arc"; + reg = <0x1c 0x8>, <0x38 0x8>; + reg-names = "remap", "cpu"; + status = "disabled"; + }; + ir_receiver: ir-receiver@480 { - compatible= "amlogic,meson6-ir"; + compatible = "amlogic,meson6-ir"; reg = <0x480 0x20>; interrupts = <GIC_SPI 15 IRQ_TYPE_EDGE_RISING>; status = "disabled"; }; uart_AO: serial@4c0 { - compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart", "amlogic,meson-uart"; + compatible = "amlogic,meson6-uart", "amlogic,meson-ao-uart"; reg = <0x4c0 0x18>; interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -229,6 +261,9 @@ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; phys = <&usb0_phy>; phy-names = "usb2-phy"; + g-rx-fifo-size = <512>; + g-np-tx-fifo-size = <500>; + g-tx-fifo-size = <256 192 128 128 128>; dr_mode = "host"; status = "disabled"; }; @@ -283,6 +318,13 @@ }; }; + thermal_sensor: thermal-sensor { + compatible = "generic-adc-thermal"; + #thermal-sensor-cells = <0>; + io-channels = <&saradc 8>; + io-channel-names = "sensor-channel"; + }; + xtal: xtal-clk { compatible = "fixed-clock"; clock-frequency = <24000000>; |