diff options
Diffstat (limited to 'arch/arm/boot/dts/meson8b.dtsi')
-rw-r--r-- | arch/arm/boot/dts/meson8b.dtsi | 191 |
1 files changed, 178 insertions, 13 deletions
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index cd1ca9dda126..fe84a8c3ce81 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -62,6 +62,8 @@ reg = <0x200>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu1: cpu@201 { @@ -71,6 +73,8 @@ reg = <0x201>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu2: cpu@202 { @@ -80,6 +84,8 @@ reg = <0x202>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; }; cpu3: cpu@203 { @@ -89,6 +95,92 @@ reg = <0x203>; enable-method = "amlogic,meson8b-smp"; resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>; + operating-points-v2 = <&cpu_opp_table>; + clocks = <&clkc CLKID_CPUCLK>; + }; + }; + + cpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-96000000 { + opp-hz = /bits/ 64 <96000000>; + opp-microvolt = <860000>; + }; + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + opp-microvolt = <860000>; + }; + opp-312000000 { + opp-hz = /bits/ 64 <312000000>; + opp-microvolt = <860000>; + }; + opp-408000000 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <860000>; + }; + opp-504000000 { + opp-hz = /bits/ 64 <504000000>; + opp-microvolt = <860000>; + }; + opp-600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <860000>; + }; + opp-720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <860000>; + }; + opp-816000000 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <900000>; + }; + opp-1008000000 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <1140000>; + }; + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1140000>; + }; + opp-1320000000 { + opp-hz = /bits/ 64 <1320000000>; + opp-microvolt = <1140000>; + }; + opp-1488000000 { + opp-hz = /bits/ 64 <1488000000>; + opp-microvolt = <1140000>; + }; + opp-1536000000 { + opp-hz = /bits/ 64 <1536000000>; + opp-microvolt = <1140000>; + }; + }; + + gpu_opp_table: gpu-opp-table { + compatible = "operating-points-v2"; + + opp-255000000 { + opp-hz = /bits/ 64 <255000000>; + opp-microvolt = <1150000>; + }; + opp-364300000 { + opp-hz = /bits/ 64 <364300000>; + opp-microvolt = <1150000>; + }; + opp-425000000 { + opp-hz = /bits/ 64 <425000000>; + opp-microvolt = <1150000>; + }; + opp-510000000 { + opp-hz = /bits/ 64 <510000000>; + opp-microvolt = <1150000>; + }; + opp-637500000 { + opp-hz = /bits/ 64 <637500000>; + opp-microvolt = <1150000>; + turbo-mode; }; }; @@ -113,9 +205,32 @@ }; }; - scu@c4300000 { - compatible = "arm,cortex-a5-scu"; - reg = <0xc4300000 0x100>; + apb: bus@d0000000 { + compatible = "simple-bus"; + reg = <0xd0000000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xd0000000 0x200000>; + + mali: gpu@c0000 { + compatible = "amlogic,meson8b-mali", "arm,mali-450"; + reg = <0xc0000 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1"; + resets = <&reset RESET_MALI>; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + operating-points-v2 = <&gpu_opp_table>; + switch-delay = <0xffff>; + }; }; }; /* end of / */ @@ -146,6 +261,7 @@ mux { groups = "uart_tx_ao_a", "uart_rx_ao_a"; function = "uart_ao"; + bias-disable; }; }; @@ -153,19 +269,13 @@ mux { groups = "remote_input"; function = "remote"; + bias-disable; }; }; }; }; &cbus { - clkc: clock-controller@4000 { - #clock-cells = <1>; - #reset-cells = <1>; - compatible = "amlogic,meson8b-clkc"; - reg = <0x8000 0x4>, <0x4000 0x400>; - }; - reset: reset-controller@4404 { compatible = "amlogic,meson8b-reset"; reg = <0x4404 0x9c>; @@ -207,9 +317,7 @@ groups = "eth_tx_clk", "eth_tx_en", "eth_txd1_0", - "eth_txd1_1", "eth_txd0_0", - "eth_txd0_1", "eth_rx_clk", "eth_rx_dv", "eth_rxd1", @@ -218,8 +326,11 @@ "eth_mdc", "eth_ref_clk", "eth_txd2", - "eth_txd3"; + "eth_txd3", + "eth_rxd3", + "eth_rxd2"; function = "ethernet"; + bias-disable; }; }; @@ -235,6 +346,7 @@ "eth_mdio_en", "eth_mdc"; function = "ethernet"; + bias-disable; }; }; @@ -242,6 +354,7 @@ mux { groups = "i2c_sda_a", "i2c_sck_a"; function = "i2c_a"; + bias-disable; }; }; @@ -250,6 +363,7 @@ groups = "sd_d0_b", "sd_d1_b", "sd_d2_b", "sd_d3_b", "sd_clk_b", "sd_cmd_b"; function = "sd_b"; + bias-disable; }; }; @@ -257,6 +371,7 @@ mux { groups = "pwm_c1"; function = "pwm_c"; + bias-disable; }; }; @@ -265,6 +380,7 @@ groups = "uart_tx_b0", "uart_rx_b0"; function = "uart_b"; + bias-disable; }; }; @@ -273,6 +389,7 @@ groups = "uart_cts_b0", "uart_rts_b0"; function = "uart_b"; + bias-disable; }; }; }; @@ -290,6 +407,11 @@ compatible = "amlogic,meson8b-efuse"; clocks = <&clkc CLKID_EFUSE>; clock-names = "core"; + + temperature_calib: calib@1f4 { + /* only the upper two bytes are relevant */ + reg = <0x1f4 0x4>; + }; }; ðmac { @@ -313,6 +435,14 @@ status = "okay"; }; +&hhi { + clkc: clock-controller { + compatible = "amlogic,meson8-clkc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; +}; + &hwrng { compatible = "amlogic,meson8b-rng", "amlogic,meson-rng"; clocks = <&clkc CLKID_RNG0>; @@ -340,6 +470,33 @@ arm,shared-override; }; +&periph { + scu@0 { + compatible = "arm,cortex-a5-scu"; + reg = <0x0 0x100>; + }; + + timer@200 { + compatible = "arm,cortex-a5-global-timer"; + reg = <0x200 0x20>; + interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + + /* + * the arm_global_timer driver currently does not handle clock + * rate changes. Keep it disabled for now. + */ + status = "disabled"; + }; + + timer@600 { + compatible = "arm,cortex-a5-twd-timer"; + reg = <0x600 0x20>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>; + clocks = <&clkc CLKID_PERIPH>; + }; +}; + &pwm_ab { compatible = "amlogic,meson8b-pwm"; }; @@ -353,6 +510,9 @@ clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_SAR_ADC>; clock-names = "clkin", "core"; + amlogic,hhi-sysctrl = <&hhi>; + nvmem-cells = <&temperature_calib>; + nvmem-cell-names = "temperature_calib"; }; &sdio { @@ -361,6 +521,11 @@ clock-names = "core", "clkin"; }; +&timer_abcde { + clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; + clock-names = "xtal", "pclk"; +}; + &uart_AO { compatible = "amlogic,meson8b-uart", "amlogic,meson-uart"; clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>; |