diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts')
-rw-r--r-- | arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts | 409 |
1 files changed, 0 insertions, 409 deletions
diff --git a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts b/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts deleted file mode 100644 index 6d77e0f8ca4d..000000000000 --- a/arch/arm/boot/dts/qcom-msm8974-fairphone-fp2.dts +++ /dev/null @@ -1,409 +0,0 @@ -#include "qcom-msm8974.dtsi" -#include "qcom-pm8841.dtsi" -#include "qcom-pm8941.dtsi" -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> - - -/ { - model = "Fairphone 2"; - compatible = "fairphone,fp2", "qcom,msm8974"; - - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - - pinctrl-names = "default"; - pinctrl-0 = <&gpio_keys_pin_a>; - - camera-snapshot { - label = "camera_snapshot"; - gpios = <&pm8941_gpios 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_CAMERA>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-down { - label = "volume_down"; - gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - wakeup-source; - debounce-interval = <15>; - }; - - volume-up { - label = "volume_up"; - gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - wakeup-source; - debounce-interval = <15>; - }; - }; - - vibrator { - compatible = "gpio-vibrator"; - enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; - vcc-supply = <&pm8941_l18>; - }; - - smd { - rpm { - rpm_requests { - pm8841-regulators { - s1 { - regulator-min-microvolt = <675000>; - regulator-max-microvolt = <1050000>; - }; - - s2 { - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1050000>; - }; - - s3 { - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - }; - - pm8941-regulators { - vdd_l1_l3-supply = <&pm8941_s1>; - vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; - vdd_l4_l11-supply = <&pm8941_s1>; - vdd_l5_l7-supply = <&pm8941_s2>; - vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; - vdd_l9_l10_l17_l22-supply = <&vreg_boost>; - vdd_l13_l20_l23_l24-supply = <&vreg_boost>; - vdd_l21-supply = <&vreg_boost>; - - s1 { - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - - regulator-always-on; - regulator-boot-on; - }; - - s2 { - regulator-min-microvolt = <2150000>; - regulator-max-microvolt = <2150000>; - - regulator-boot-on; - }; - - s3 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - regulator-always-on; - regulator-boot-on; - }; - - l2 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - l3 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l4 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - }; - - l5 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l6 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l7 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-boot-on; - }; - - l8 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l9 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l10 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - }; - - l11 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1350000>; - }; - - l12 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - regulator-always-on; - regulator-boot-on; - }; - - l13 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l14 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - l15 { - regulator-min-microvolt = <2050000>; - regulator-max-microvolt = <2050000>; - }; - - l16 { - regulator-min-microvolt = <2700000>; - regulator-max-microvolt = <2700000>; - }; - - l17 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l18 { - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - }; - - l19 { - regulator-min-microvolt = <2900000>; - regulator-max-microvolt = <3350000>; - }; - - l20 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - regulator-system-load = <200000>; - regulator-allow-set-load; - }; - - l21 { - regulator-min-microvolt = <2950000>; - regulator-max-microvolt = <2950000>; - - regulator-boot-on; - }; - - l22 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3300000>; - }; - - l23 { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - l24 { - regulator-min-microvolt = <3075000>; - regulator-max-microvolt = <3075000>; - - regulator-boot-on; - }; - }; - }; - }; - }; -}; - -&soc { - serial@f991e000 { - status = "okay"; - }; - - remoteproc@fb21b000 { - status = "okay"; - - vddmx-supply = <&pm8841_s1>; - vddcx-supply = <&pm8841_s2>; - - pinctrl-names = "default"; - pinctrl-0 = <&wcnss_pin_a>; - - smd-edge { - qcom,remote-pid = <4>; - label = "pronto"; - - wcnss { - status = "okay"; - }; - }; - }; - - pinctrl@fd510000 { - sdhc1_pin_a: sdhc1-pin-active { - clk { - pins = "sdc1_clk"; - drive-strength = <16>; - bias-disable; - }; - - cmd-data { - pins = "sdc1_cmd", "sdc1_data"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - sdhc2_pin_a: sdhc2-pin-active { - clk { - pins = "sdc2_clk"; - drive-strength = <10>; - bias-disable; - }; - - cmd-data { - pins = "sdc2_cmd", "sdc2_data"; - drive-strength = <6>; - bias-pull-up; - }; - }; - - wcnss_pin_a: wcnss-pin-active { - wlan { - pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; - function = "wlan"; - - drive-strength = <6>; - bias-pull-down; - }; - - bt { - pins = "gpio35", "gpio43", "gpio44"; - function = "bt"; - - drive-strength = <2>; - bias-pull-down; - }; - - fm { - pins = "gpio41", "gpio42"; - function = "fm"; - - drive-strength = <2>; - bias-pull-down; - }; - }; - }; - - sdhci@f9824900 { - status = "okay"; - - vmmc-supply = <&pm8941_l20>; - vqmmc-supply = <&pm8941_s3>; - - bus-width = <8>; - non-removable; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc1_pin_a>; - }; - - sdhci@f98a4900 { - status = "okay"; - - vmmc-supply = <&pm8941_l21>; - vqmmc-supply = <&pm8941_l13>; - - bus-width = <4>; - - pinctrl-names = "default"; - pinctrl-0 = <&sdhc2_pin_a>; - }; - - usb@f9a55000 { - status = "okay"; - - phys = <&usb_hs1_phy>; - phy-select = <&tcsr 0xb000 0>; - extcon = <&smbb>, <&usb_id>; - vbus-supply = <&chg_otg>; - - hnp-disable; - srp-disable; - adp-disable; - - ulpi { - phy@a { - status = "okay"; - - v1p8-supply = <&pm8941_l6>; - v3p3-supply = <&pm8941_l24>; - - extcon = <&smbb>; - qcom,init-seq = /bits/ 8 <0x1 0x64>; - }; - }; - }; - - imem@fe805000 { - status = "okay"; - - reboot-mode { - mode-normal = <0x77665501>; - mode-bootloader = <0x77665500>; - mode-recovery = <0x77665502>; - }; - }; -}; - -&spmi_bus { - pm8941@0 { - gpios@c000 { - gpio_keys_pin_a: gpio-keys-active { - pins = "gpio1", "gpio2", "gpio5"; - function = "normal"; - - bias-pull-up; - power-source = <PM8941_GPIO_S3>; - }; - }; - }; -}; |