diff options
Diffstat (limited to 'arch/arm/boot/dts/qcom-sdx55.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/qcom-sdx55.dtsi | 116 |
1 files changed, 95 insertions, 21 deletions
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi index 44526ad9d210..c72540223fa9 100644 --- a/arch/arm/boot/dts/qcom-sdx55.dtsi +++ b/arch/arm/boot/dts/qcom-sdx55.dtsi @@ -8,6 +8,7 @@ #include <dt-bindings/clock/qcom,gcc-sdx55.h> #include <dt-bindings/clock/qcom,rpmh.h> +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interconnect/qcom,sdx55.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/power/qcom-rpmpd.h> @@ -205,7 +206,7 @@ blsp1_uart3: serial@831000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x00831000 0x200>; - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc 30>, <&gcc 9>; clock-names = "core", "iface"; @@ -274,13 +275,6 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; - ipa_virt: interconnect@1e00000 { - compatible = "qcom,sdx55-ipa-virt"; - reg = <0x01e00000 0x100000>; - #interconnect-cells = <1>; - qcom,bcm-voters = <&apps_bcm_voter>; - }; - qpic_bam: dma-controller@1b04000 { compatible = "qcom,bam-v1.7.0"; reg = <0x01b04000 0x1c000>; @@ -309,6 +303,41 @@ status = "disabled"; }; + pcie0_phy: phy@1c07000 { + compatible = "qcom,sdx55-qmp-pcie-phy"; + reg = <0x01c07000 0x1c4>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clocks = <&gcc GCC_PCIE_AUX_PHY_CLK_SRC>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>, + <&gcc GCC_PCIE_RCHNG_PHY_CLK>; + clock-names = "aux", "cfg_ahb", "ref", "refgen"; + + resets = <&gcc GCC_PCIE_PHY_BCR>; + reset-names = "phy"; + + assigned-clocks = <&gcc GCC_PCIE_RCHNG_PHY_CLK>; + assigned-clock-rates = <100000000>; + + status = "disabled"; + + pcie0_lane: lanes@1c06000 { + reg = <0x01c06000 0x104>, /* tx0 */ + <0x01c06200 0x328>, /* rx0 */ + <0x01c07200 0x1e8>, /* pcs */ + <0x01c06800 0x104>, /* tx1 */ + <0x01c06a00 0x328>, /* rx1 */ + <0x01c07600 0x800>; /* pcs_misc */ + clocks = <&gcc GCC_PCIE_PIPE_CLK>; + clock-names = "pipe0"; + + #phy-cells = <0>; + clock-output-names = "pcie_pipe_clk"; + }; + }; + ipa: ipa@1e40000 { compatible = "qcom,sdx55-ipa"; @@ -333,12 +362,10 @@ clocks = <&rpmhcc RPMH_IPA_CLK>; clock-names = "core"; - interconnects = <&system_noc MASTER_IPA &system_noc SLAVE_SNOC_MEM_NOC_GC>, - <&mem_noc MASTER_SNOC_GC_MEM_NOC &mc_virt SLAVE_EBI_CH0>, + interconnects = <&system_noc MASTER_IPA &mc_virt SLAVE_EBI_CH0>, <&system_noc MASTER_IPA &system_noc SLAVE_OCIMEM>, <&mem_noc MASTER_AMPSS_M0 &system_noc SLAVE_IPA_CFG>; - interconnect-names = "memory-a", - "memory-b", + interconnect-names = "memory", "imem", "config"; @@ -356,7 +383,12 @@ #hwlock-cells = <1>; }; - sdhc_1: sdhci@8804000 { + tcsr: syscon@1fcb000 { + compatible = "syscon"; + reg = <0x01fc0000 0x1000>; + }; + + sdhc_1: mmc@8804000 { compatible = "qcom,sdx55-sdhci", "qcom,sdhci-msm-v5"; reg = <0x08804000 0x1000>; interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>, @@ -368,6 +400,45 @@ status = "disabled"; }; + pcie_ep: pcie-ep@40000000 { + compatible = "qcom,sdx55-pcie-ep"; + reg = <0x01c00000 0x3000>, + <0x40000000 0xf1d>, + <0x40000f20 0xc8>, + <0x40001000 0x1000>, + <0x40200000 0x100000>, + <0x01c03000 0x3000>; + reg-names = "parf", "dbi", "elbi", "atu", "addr_space", + "mmio"; + + qcom,perst-regs = <&tcsr 0xb258 0xb270>; + + clocks = <&gcc GCC_PCIE_AUX_CLK>, + <&gcc GCC_PCIE_CFG_AHB_CLK>, + <&gcc GCC_PCIE_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_SLV_AXI_CLK>, + <&gcc GCC_PCIE_SLV_Q2A_AXI_CLK>, + <&gcc GCC_PCIE_SLEEP_CLK>, + <&gcc GCC_PCIE_0_CLKREF_CLK>; + clock-names = "aux", "cfg", "bus_master", "bus_slave", + "slave_q2a", "sleep", "ref"; + + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "global", "doorbell"; + reset-gpios = <&tlmm 57 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 53 GPIO_ACTIVE_LOW>; + resets = <&gcc GCC_PCIE_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE_GDSC>; + phys = <&pcie0_lane>; + phy-names = "pciephy"; + max-link-speed = <3>; + num-lanes = <2>; + + status = "disabled"; + }; + remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sdx55-mpss-pas"; reg = <0x04080000 0x4040>; @@ -412,10 +483,13 @@ clocks = <&gcc GCC_USB30_SLV_AHB_CLK>, <&gcc GCC_USB30_MASTER_CLK>, <&gcc GCC_USB30_MSTR_AXI_CLK>, - <&gcc GCC_USB30_MOCK_UTMI_CLK>, - <&gcc GCC_USB30_SLEEP_CLK>; - clock-names = "cfg_noc", "core", "iface", "mock_utmi", - "sleep"; + <&gcc GCC_USB30_SLEEP_CLK>, + <&gcc GCC_USB30_MOCK_UTMI_CLK>; + clock-names = "cfg_noc", + "core", + "iface", + "sleep", + "mock_utmi"; assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>, <&gcc GCC_USB30_MASTER_CLK>; @@ -458,7 +532,7 @@ reg = <0x0c264000 0x1000>; }; - spmi_bus: qcom,spmi@c440000 { + spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0c440000 0x0000d00>, <0x0c600000 0x2000000>, @@ -487,8 +561,8 @@ #interrupt-cells = <2>; }; - imem@1468f000 { - compatible = "simple-mfd"; + sram@1468f000 { + compatible = "qcom,sdx55-imem", "syscon", "simple-mfd"; reg = <0x1468f000 0x1000>; #address-cells = <1>; @@ -692,7 +766,7 @@ }; }; - apps_bcm_voter: bcm_voter { + apps_bcm_voter: bcm-voter { compatible = "qcom,bcm-voter"; }; }; |