diff options
Diffstat (limited to 'arch/arm/boot/dts/s5pv210-goni.dts')
| -rw-r--r-- | arch/arm/boot/dts/s5pv210-goni.dts | 126 |
1 files changed, 63 insertions, 63 deletions
diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index fbbd93707404..d32f42dd1bf5 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -11,6 +11,8 @@ */ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/input/input.h> #include "s5pv210.dtsi" @@ -28,57 +30,54 @@ memory@30000000 { device_type = "memory"; - reg = <0x30000000 0x05000000 - 0x40000000 0x10000000 - 0x50000000 0x08000000>; + reg = <0x30000000 0x05000000>, + <0x40000000 0x10000000>, + <0x50000000 0x08000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; + pmic_ap_clk: clock-0 { + /* Workaround for missing clock on PMIC */ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; - vtf_reg: fixed-regulator@0 { - compatible = "regulator-fixed"; - regulator-name = "V_TF_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - reg = <0>; - gpio = <&mp05 4 0>; - enable-active-high; - }; + vtf_reg: regulator-0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&mp05 4 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; - pda_reg: fixed-regulator@1 { - compatible = "regulator-fixed"; - regulator-name = "VCC_1.8V_PDA"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - reg = <1>; - }; + pda_reg: regulator-1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; - bat_reg: fixed-regulator@2 { - compatible = "regulator-fixed"; - regulator-name = "V_BAT"; - regulator-min-microvolt = <3700000>; - regulator-max-microvolt = <3700000>; - reg = <2>; - }; + bat_reg: regulator-2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; - tsp_reg: fixed-regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "TSP_VDD"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - reg = <3>; - gpio = <&gpj1 3 0>; - enable-active-high; - }; + tsp_reg: regulator-3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_VDD"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpj1 3 GPIO_ACTIVE_HIGH>; + enable-active-high; }; i2c_pmic: i2c-pmic { compatible = "i2c-gpio"; - gpios = <&gpj4 0 0>, /* sda */ - <&gpj4 3 0>; /* scl */ + sda-gpios = <&gpj4 0 GPIO_ACTIVE_HIGH>; + scl-gpios = <&gpj4 3 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; @@ -88,13 +87,13 @@ reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, - <&gph0 4 0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 GPIO_ACTIVE_HIGH>, + <&gph0 4 GPIO_ACTIVE_HIGH>; max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, <1200000>, <1200000>; max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; regulators { @@ -224,6 +223,11 @@ regulator-max-microvolt = <1200000>; regulator-always-on; }; + + ap32khz_reg: EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; }; }; }; @@ -255,37 +259,37 @@ <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; status = "okay"; - key_1 { + key-1 { keypad,row = <0>; keypad,column = <1>; linux,code = <KEY_CONNECT>; }; - key_2 { + key-2 { keypad,row = <0>; keypad,column = <2>; linux,code = <KEY_BACK>; }; - key_3 { + key-3 { keypad,row = <1>; keypad,column = <1>; linux,code = <KEY_CAMERA_FOCUS>; }; - key_4 { + key-4 { keypad,row = <1>; keypad,column = <2>; linux,code = <KEY_VOLUMEUP>; }; - key_5 { + key-5 { keypad,row = <2>; keypad,column = <1>; linux,code = <KEY_CAMERA>; }; - key_6 { + key-6 { keypad,row = <2>; keypad,column = <2>; linux,code = <KEY_VOLUMEDOWN>; @@ -308,6 +312,11 @@ status = "okay"; }; +&rtc { + clocks = <&clocks CLK_RTC>, <&pmic_ap_clk>; + clock-names = "rtc", "rtc_src"; +}; + &sdhci0 { bus-width = <4>; non-removable; @@ -344,20 +353,11 @@ samsung,i2c-slave-addr = <0x10>; status = "okay"; - tsp@4a { + touchscreen@4a { compatible = "atmel,maxtouch"; reg = <0x4a>; interrupt-parent = <&gpj0>; - interrupts = <5 2>; - - atmel,x-line = <17>; - atmel,y-line = <11>; - atmel,x-size = <800>; - atmel,y-size = <480>; - atmel,burst-length = <0x21>; - atmel,threshold = <0x28>; - atmel,orientation = <1>; - + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; vdd-supply = <&tsp_reg>; }; }; @@ -378,8 +378,8 @@ clock-frequency = <16000000>; clocks = <&camera 0>; clock-names = "mclk"; - nreset-gpios = <&gpb 2 0>; - nstby-gpios = <&gpb 0 0>; + nreset-gpios = <&gpb 2 GPIO_ACTIVE_HIGH>; + nstby-gpios = <&gpb 0 GPIO_ACTIVE_HIGH>; port { noon010pc30_ep: endpoint { |