diff options
Diffstat (limited to 'arch/arm/boot/dts/ste-href.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/ste-href.dtsi | 93 |
1 files changed, 65 insertions, 28 deletions
diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 33e3b0b3c53d..8f1bb78fc1e4 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -4,6 +4,7 @@ */ #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include "ste-href-family-pinctrl.dtsi" / { @@ -12,6 +13,37 @@ reg = <0x00000000 0x20000000>; }; + battery: battery { + compatible = "simple-battery"; + battery-type = "lithium-ion-polymer"; + }; + + thermal-zones { + battery-thermal { + /* This zone will be polled by the battery temperature code */ + polling-delay = <0>; + polling-delay-passive = <0>; + thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; + + bat_therm: thermistor { + compatible = "murata,ncp18wb473"; + io-channels = <&gpadc 0x02>; /* BatTemp */ + pullup-uv = <1800000>; + pullup-ohm = <230000>; + pulldown-ohm = <0>; + #thermal-sensor-cells = <0>; + }; + soc { uart@80120000 { pinctrl-names = "default", "sleep"; @@ -58,18 +90,26 @@ reg = <0x33>; label = "lp5521_pri"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; linux,default-trigger = "heartbeat"; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; }; lp5521@34 { @@ -77,17 +117,25 @@ reg = <0x34>; label = "lp5521_sec"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; + color = <LED_COLOR_ID_BLUE>; }; }; bh1780@29 { @@ -103,23 +151,8 @@ status = "okay"; }; - /* ST6G3244ME level translator for 1.8/2.9 V */ - vmmci: regulator-gpio { - compatible = "regulator-gpio"; - - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2900000>; - regulator-name = "mmci-reg"; - regulator-type = "voltage"; - - startup-delay-us = <100>; - - states = <1800000 0x1 - 2900000 0x0>; - }; - // External Micro SD slot - sdi0_per1@80126000 { + mmc@80126000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -142,7 +175,7 @@ }; // WLAN SDIO channel - sdi1_per2@80118000 { + mmc@80118000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; @@ -155,12 +188,14 @@ }; // PoP:ed eMMC - sdi2_per3@80005000 { + mmc@80005000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; cap-mmc-highspeed; non-removable; + no-sdio; + no-sd; vmmc-supply = <&db8500_vsmps2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc2_a_1_default>; @@ -170,12 +205,14 @@ }; // On-board eMMC - sdi4_per2@80114000 { + mmc@80114000 { arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <8>; cap-mmc-highspeed; non-removable; + no-sdio; + no-sd; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&mc4_a_1_default>; @@ -207,16 +244,16 @@ prcmu@80157000 { ab8500 { - ab8500-gpio { + gpio { }; - ab8500_usb { + phy { pinctrl-names = "default", "sleep"; pinctrl-0 = <&usb_a_1_default>; pinctrl-1 = <&usb_a_1_sleep>; }; - ab8500-regulators { + regulator { ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { regulator-name = "V-DISPLAY"; }; |