diff options
Diffstat (limited to 'arch/arm/boot/dts/ste-snowball.dts')
| -rw-r--r-- | arch/arm/boot/dts/ste-snowball.dts | 52 |
1 files changed, 26 insertions, 26 deletions
diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 566b35ac0d0c..8b80dcdf6e5b 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -156,19 +156,19 @@ msp0: msp@80123000 { pinctrl-names = "default"; - pinctrl-0 = <&msp0_default_mode>; + pinctrl-0 = <&msp0txrxtfstck_a_1_default>; status = "okay"; }; msp1: msp@80124000 { pinctrl-names = "default"; - pinctrl-0 = <&msp1_default_mode>; + pinctrl-0 = <&msp1txrx_a_1_default>; status = "okay"; }; msp2: msp@80117000 { pinctrl-names = "default"; - pinctrl-0 = <&msp2_default_mode>; + pinctrl-0 = <&msp2_a_1_default>; }; msp3: msp@80125000 { @@ -238,8 +238,8 @@ vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi0_default_mode>; - pinctrl-1 = <&sdi0_sleep_mode>; + pinctrl-0 = <&mc0_a_1_default &sdi0_default_mode>; + pinctrl-1 = <&mc0_a_1_sleep>; /* GPIO218 MMC_CD */ cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; @@ -253,8 +253,8 @@ max-frequency = <100000000>; bus-width = <4>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi1_default_mode>; - pinctrl-1 = <&sdi1_sleep_mode>; + pinctrl-0 = <&mc1_a_1_default>; + pinctrl-1 = <&mc1_a_1_sleep>; status = "okay"; }; @@ -263,7 +263,7 @@ sdi2_per3@80005000 { arm,primecell-periphid = <0x10480180>; pinctrl-names = "default"; - pinctrl-0 = <&sdi2_sleep_mode>; + pinctrl-0 = <&mc2_a_1_sleep>; status = "okay"; }; @@ -276,49 +276,49 @@ cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdi4_default_mode>; - pinctrl-1 = <&sdi4_sleep_mode>; + pinctrl-0 = <&mc4_a_1_default>; + pinctrl-1 = <&mc4_a_1_sleep>; status = "okay"; }; uart@80120000 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart0_default_mode>; - pinctrl-1 = <&uart0_sleep_mode>; + pinctrl-0 = <&u0_a_1_default>; + pinctrl-1 = <&u0_a_1_sleep>; status = "okay"; }; /* This UART is unused and thus left disabled */ uart@80121000 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart1_default_mode>; - pinctrl-1 = <&uart1_sleep_mode>; + pinctrl-0 = <&u1rxtx_a_1_default>; + pinctrl-1 = <&u1rxtx_a_1_sleep>; }; uart@80007000 { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&uart2_default_mode>; - pinctrl-1 = <&uart2_sleep_mode>; + pinctrl-0 = <&u2rxtx_c_1_default>; + pinctrl-1 = <&u2rxtx_c_1_sleep>; status = "okay"; }; i2c@80004000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c0_default_mode>; - pinctrl-1 = <&i2c0_sleep_mode>; + pinctrl-0 = <&i2c0_a_1_default>; + pinctrl-1 = <&i2c0_a_1_sleep>; }; i2c@80122000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c1_default_mode>; - pinctrl-1 = <&i2c1_sleep_mode>; + pinctrl-0 = <&i2c1_b_2_default>; + pinctrl-1 = <&i2c1_b_2_sleep>; }; i2c@80128000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c2_default_mode>; - pinctrl-1 = <&i2c2_sleep_mode>; + pinctrl-0 = <&i2c2_b_2_default>; + pinctrl-1 = <&i2c2_b_2_sleep>; lsm303dlh@18 { /* Accelerometer */ compatible = "st,lsm303dlh-accel"; @@ -367,8 +367,8 @@ i2c@80110000 { pinctrl-names = "default","sleep"; - pinctrl-0 = <&i2c3_default_mode>; - pinctrl-1 = <&i2c3_sleep_mode>; + pinctrl-0 = <&i2c3_c_2_default>; + pinctrl-1 = <&i2c3_c_2_sleep>; }; spi@80002000 { @@ -402,8 +402,8 @@ ab8500_usb { pinctrl-names = "default", "sleep"; - pinctrl-0 = <&musb_default_mode>; - pinctrl-1 = <&musb_sleep_mode>; + pinctrl-0 = <&usb_a_1_default>; + pinctrl-1 = <&usb_a_1_sleep>; }; ext_regulators: ab8500-ext-regulators { |