diff options
Diffstat (limited to 'arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi | 64 |
1 files changed, 19 insertions, 45 deletions
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi index 7c4bd615b311..8456f172d4b1 100644 --- a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi +++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi @@ -11,7 +11,6 @@ serial0 = &uart4; serial1 = &usart3; serial2 = &uart8; - ethernet0 = ðernet0; }; chosen { @@ -26,23 +25,13 @@ display_bl: display-bl { compatible = "pwm-backlight"; - pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>; brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>; default-brightness-level = <8>; enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>; status = "okay"; }; - ethernet_vio: vioregulator { - compatible = "regulator-fixed"; - regulator-name = "vio"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - gpio = <&gpiog 3 GPIO_ACTIVE_LOW>; - regulator-always-on; - regulator-boot-on; - }; - gpio-keys-polled { compatible = "gpio-keys-polled"; #size-cells = <0>; @@ -57,6 +46,16 @@ linux,code = <KEY_A>; gpios = <&gpiof 3 GPIO_ACTIVE_LOW>; }; + + /* + * The EXTi IRQ line 0 is shared with PMIC, + * so mark this as polled GPIO key. + */ + button-2 { + label = "TA3-GPIO-C"; + linux,code = <KEY_C>; + gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; + }; }; gpio-keys { @@ -70,13 +69,6 @@ wakeup-source; }; - button-2 { - label = "TA3-GPIO-C"; - linux,code = <KEY_C>; - gpios = <&gpioi 11 GPIO_ACTIVE_LOW>; - wakeup-source; - }; - button-3 { label = "TA4-GPIO-D"; linux,code = <KEY_D>; @@ -90,7 +82,7 @@ led-0 { label = "green:led5"; - gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>; + gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>; default-state = "off"; }; @@ -141,28 +133,6 @@ status = "okay"; }; -ðernet0 { - status = "okay"; - pinctrl-0 = <ðernet0_rmii_pins_a>; - pinctrl-1 = <ðernet0_rmii_sleep_pins_a>; - pinctrl-names = "default", "sleep"; - phy-mode = "rmii"; - max-speed = <100>; - phy-handle = <&phy0>; - st,eth-ref-clk-sel; - phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>; - - mdio0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,dwmac-mdio"; - - phy0: ethernet-phy@1 { - reg = <1>; - }; - }; -}; - &i2c2 { /* Header X22 */ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; @@ -304,7 +274,8 @@ &uart8 { pinctrl-names = "default"; - pinctrl-0 = <&uart8_pins_a>; + pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>; + uart-has-rtscts; status = "okay"; }; @@ -314,9 +285,12 @@ }; &usbotg_hs { - dr_mode = "peripheral"; - phys = <&usbphyc_port1 0>; + dr_mode = "otg"; + pinctrl-0 = <&usbotg_hs_pins_a>; + pinctrl-names = "default"; phy-names = "usb2-phy"; + phys = <&usbphyc_port1 0>; + vbus-supply = <&vbus_otg>; status = "okay"; }; |