diff options
Diffstat (limited to 'arch/arm/include/asm/hardware/pl330.h')
| -rw-r--r-- | arch/arm/include/asm/hardware/pl330.h | 217 |
1 files changed, 0 insertions, 217 deletions
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h deleted file mode 100644 index c1821385abfa..000000000000 --- a/arch/arm/include/asm/hardware/pl330.h +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/include/asm/hardware/pl330.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __PL330_CORE_H -#define __PL330_CORE_H - -#define PL330_MAX_CHAN 8 -#define PL330_MAX_IRQS 32 -#define PL330_MAX_PERI 32 - -enum pl330_srccachectrl { - SCCTRL0 = 0, /* Noncacheable and nonbufferable */ - SCCTRL1, /* Bufferable only */ - SCCTRL2, /* Cacheable, but do not allocate */ - SCCTRL3, /* Cacheable and bufferable, but do not allocate */ - SINVALID1, - SINVALID2, - SCCTRL6, /* Cacheable write-through, allocate on reads only */ - SCCTRL7, /* Cacheable write-back, allocate on reads only */ -}; - -enum pl330_dstcachectrl { - DCCTRL0 = 0, /* Noncacheable and nonbufferable */ - DCCTRL1, /* Bufferable only */ - DCCTRL2, /* Cacheable, but do not allocate */ - DCCTRL3, /* Cacheable and bufferable, but do not allocate */ - DINVALID1, /* AWCACHE = 0x1000 */ - DINVALID2, - DCCTRL6, /* Cacheable write-through, allocate on writes only */ - DCCTRL7, /* Cacheable write-back, allocate on writes only */ -}; - -/* Populated by the PL330 core driver for DMA API driver's info */ -struct pl330_config { - u32 periph_id; - u32 pcell_id; -#define DMAC_MODE_NS (1 << 0) - unsigned int mode; - unsigned int data_bus_width:10; /* In number of bits */ - unsigned int data_buf_dep:10; - unsigned int num_chan:4; - unsigned int num_peri:6; - u32 peri_ns; - unsigned int num_events:6; - u32 irq_ns; -}; - -/* Handle to the DMAC provided to the PL330 core */ -struct pl330_info { - /* Owning device */ - struct device *dev; - /* Size of MicroCode buffers for each channel. */ - unsigned mcbufsz; - /* ioremap'ed address of PL330 registers. */ - void __iomem *base; - /* Client can freely use it. */ - void *client_data; - /* PL330 core data, Client must not touch it. */ - void *pl330_data; - /* Populated by the PL330 core driver during pl330_add */ - struct pl330_config pcfg; - /* - * If the DMAC has some reset mechanism, then the - * client may want to provide pointer to the method. - */ - void (*dmac_reset)(struct pl330_info *pi); -}; - -enum pl330_byteswap { - SWAP_NO = 0, - SWAP_2, - SWAP_4, - SWAP_8, - SWAP_16, -}; - -/** - * Request Configuration. - * The PL330 core does not modify this and uses the last - * working configuration if the request doesn't provide any. - * - * The Client may want to provide this info only for the - * first request and a request with new settings. - */ -struct pl330_reqcfg { - /* Address Incrementing */ - unsigned dst_inc:1; - unsigned src_inc:1; - - /* - * For now, the SRC & DST protection levels - * and burst size/length are assumed same. - */ - bool nonsecure; - bool privileged; - bool insnaccess; - unsigned brst_len:5; - unsigned brst_size:3; /* in power of 2 */ - - enum pl330_dstcachectrl dcctl; - enum pl330_srccachectrl scctl; - enum pl330_byteswap swap; -}; - -/* - * One cycle of DMAC operation. - * There may be more than one xfer in a request. - */ -struct pl330_xfer { - u32 src_addr; - u32 dst_addr; - /* Size to xfer */ - u32 bytes; - /* - * Pointer to next xfer in the list. - * The last xfer in the req must point to NULL. - */ - struct pl330_xfer *next; -}; - -/* The xfer callbacks are made with one of these arguments. */ -enum pl330_op_err { - /* The all xfers in the request were success. */ - PL330_ERR_NONE, - /* If req aborted due to global error. */ - PL330_ERR_ABORT, - /* If req failed due to problem with Channel. */ - PL330_ERR_FAIL, -}; - -enum pl330_reqtype { - MEMTOMEM, - MEMTODEV, - DEVTOMEM, - DEVTODEV, -}; - -/* A request defining Scatter-Gather List ending with NULL xfer. */ -struct pl330_req { - enum pl330_reqtype rqtype; - /* Index of peripheral for the xfer. */ - unsigned peri:5; - /* Unique token for this xfer, set by the client. */ - void *token; - /* Callback to be called after xfer. */ - void (*xfer_cb)(void *token, enum pl330_op_err err); - /* If NULL, req will be done at last set parameters. */ - struct pl330_reqcfg *cfg; - /* Pointer to first xfer in the request. */ - struct pl330_xfer *x; -}; - -/* - * To know the status of the channel and DMAC, the client - * provides a pointer to this structure. The PL330 core - * fills it with current information. - */ -struct pl330_chanstatus { - /* - * If the DMAC engine halted due to some error, - * the client should remove-add DMAC. - */ - bool dmac_halted; - /* - * If channel is halted due to some error, - * the client should ABORT/FLUSH and START the channel. - */ - bool faulting; - /* Location of last load */ - u32 src_addr; - /* Location of last store */ - u32 dst_addr; - /* - * Pointer to the currently active req, NULL if channel is - * inactive, even though the requests may be present. - */ - struct pl330_req *top_req; - /* Pointer to req waiting second in the queue if any. */ - struct pl330_req *wait_req; -}; - -enum pl330_chan_op { - /* Start the channel */ - PL330_OP_START, - /* Abort the active xfer */ - PL330_OP_ABORT, - /* Stop xfer and flush queue */ - PL330_OP_FLUSH, -}; - -extern int pl330_add(struct pl330_info *); -extern void pl330_del(struct pl330_info *pi); -extern int pl330_update(const struct pl330_info *pi); -extern void pl330_release_channel(void *ch_id); -extern void *pl330_request_channel(const struct pl330_info *pi); -extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus); -extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op); -extern int pl330_submit_req(void *ch_id, struct pl330_req *r); - -#endif /* __PL330_CORE_H */ |