4 files changed, 16 insertions, 12 deletions
diff --git a/arch/arm/include/debug/at91.S b/arch/arm/include/debug/at91.S
index d4ae3b8e2426..0098401e5aeb 100644
--- a/arch/arm/include/debug/at91.S
+++ b/arch/arm/include/debug/at91.S
@@ -9,14 +9,6 @@
  *
 */
 
-#ifdef CONFIG_MMU
-#define AT91_IO_P2V(x) ((x) - 0x01000000)
-#else
-#define AT91_IO_P2V(x) (x)
-#endif
-
-#define AT91_DEBUG_UART_VIRT AT91_IO_P2V(CONFIG_DEBUG_UART_PHYS)
-
 #define AT91_DBGU_SR		(0x14)	/* Status Register */
 #define AT91_DBGU_THR		(0x1c)	/* Transmitter Holding Register */
 #define AT91_DBGU_TXRDY		(1 << 1)	/* Transmitter Ready */
@@ -24,7 +16,7 @@
 
 	.macro	addruart, rp, rv, tmp
 	ldr	\rp, =CONFIG_DEBUG_UART_PHYS		@ System peripherals (phys address)
-	ldr	\rv, =AT91_DEBUG_UART_VIRT		@ System peripherals (virt address)
+	ldr	\rv, =CONFIG_DEBUG_UART_VIRT		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
diff --git a/arch/arm/include/debug/clps711x.S b/arch/arm/include/debug/clps711x.S
index abe225436686..c17ac5c9e5f3 100644
--- a/arch/arm/include/debug/clps711x.S
+++ b/arch/arm/include/debug/clps711x.S
@@ -9,10 +9,10 @@
 
 #ifndef CONFIG_DEBUG_CLPS711X_UART2
 #define CLPS711X_UART_PADDR	(0x80000000 + 0x0000)
-#define CLPS711X_UART_VADDR	(0xfeff0000 + 0x0000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x0000)
 #else
 #define CLPS711X_UART_PADDR	(0x80000000 + 0x1000)
-#define CLPS711X_UART_VADDR	(0xfeff0000 + 0x1000)
+#define CLPS711X_UART_VADDR	(0xfeff4000 + 0x1000)
 #endif
 
 #define SYSFLG		(0x0140)
diff --git a/arch/arm/include/debug/exynos.S b/arch/arm/include/debug/exynos.S
index b17fdb7fbd34..60bf3c23200d 100644
--- a/arch/arm/include/debug/exynos.S
+++ b/arch/arm/include/debug/exynos.S
@@ -24,7 +24,11 @@
 		mrc	p15, 0, \tmp, c0, c0, 0
 		and	\tmp, \tmp, #0xf0
 		teq	\tmp, #0xf0		@@ A15
-		ldreq	\rp, =EXYNOS5_PA_UART
+		beq	100f
+		mrc	p15, 0, \tmp, c0, c0, 5
+		and	\tmp, \tmp, #0xf00
+		teq	\tmp, #0x100		@@ A15 + A7 but boot to A7
+100:		ldreq	\rp, =EXYNOS5_PA_UART
 		movne	\rp, #EXYNOS4_PA_UART	@@ EXYNOS4
 		ldr	\rv, =S3C_VA_UART
 #if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/include/debug/samsung.S b/arch/arm/include/debug/samsung.S
index 8d8d922e5e44..f4eeed2a1981 100644
--- a/arch/arm/include/debug/samsung.S
+++ b/arch/arm/include/debug/samsung.S
@@ -15,11 +15,13 @@
 
 	.macro fifo_level_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S5PV210_UFSTAT_TXMASK
 	.endm
 
 	.macro  fifo_full_s5pv210 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S5PV210_UFSTAT_TXFULL
 	.endm
 
@@ -28,6 +30,7 @@
 
 	.macro fifo_level_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		and	\rd, \rd, #S3C2440_UFSTAT_TXMASK
 	.endm
 
@@ -37,6 +40,7 @@
 
 	.macro  fifo_full_s3c2440 rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2440_UFSTAT_TXFULL
 	.endm
 
@@ -50,6 +54,7 @@
 
 	.macro	busyuart, rd, rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -61,6 +66,7 @@
 1001:
 		@ busy waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b
 
@@ -69,6 +75,7 @@
 
 	.macro	waituart,rd,rx
 		ldr	\rd, [\rx, # S3C2410_UFCON]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UFCON_FIFOMODE	@ fifo enabled?
 		beq	1001f				@
 		@ FIFO enabled...
@@ -80,6 +87,7 @@
 1001:
 		@ idle waiting for non fifo
 		ldr	\rd, [\rx, # S3C2410_UTRSTAT]
+ARM_BE8(rev \rd, \rd)
 		tst	\rd, #S3C2410_UTRSTAT_TXFE
 		beq	1001b