1 files changed, 157 insertions, 0 deletions
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
new file mode 100644
index 000000000000..fc145b3768fa
--- /dev/null
+++ b/arch/arm/mach-aaec2000/core.c
@@ -0,0 +1,157 @@
+/*
+ *  linux/arch/arm/mach-aaec2000/core.c
+ *
+ *  Code common to all AAEC-2000 machines
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/signal.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+
+#include <asm/mach/irq.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+/*
+ * Common I/O mapping:
+ *
+ * Static virtual address mappings are as follow:
+ *
+ * 0xf8000000-0xf8001ffff: Devices connected to APB bus
+ * 0xf8002000-0xf8003ffff: Devices connected to AHB bus
+ *
+ * Below 0xe8000000 is reserved for vm allocation.
+ *
+ * The machine specific code must provide the extra mapping beside the
+ * default mapping provided here.
+ */
+static struct map_desc standard_io_desc[] __initdata = {
+ /* virtual         physical       length           type */
+  { VIO_APB_BASE,   PIO_APB_BASE,  IO_APB_LENGTH,   MT_DEVICE },
+  { VIO_AHB_BASE,   PIO_AHB_BASE,  IO_AHB_LENGTH,   MT_DEVICE }
+};
+
+void __init aaec2000_map_io(void)
+{
+	iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
+
+/*
+ * Interrupt handling routines
+ */
+static void aaec2000_int_ack(unsigned int irq)
+{
+	IRQ_INTSR = 1 << irq;
+}
+
+static void aaec2000_int_mask(unsigned int irq)
+{
+	IRQ_INTENC |= (1 << irq);
+}
+
+static void aaec2000_int_unmask(unsigned int irq)
+{
+	IRQ_INTENS |= (1 << irq);
+}
+
+static struct irqchip aaec2000_irq_chip = {
+	.ack	= aaec2000_int_ack,
+	.mask	= aaec2000_int_mask,
+	.unmask	= aaec2000_int_unmask,
+};
+
+void __init aaec2000_init_irq(void)
+{
+	unsigned int i;
+
+	for (i = 0; i < NR_IRQS; i++) {
+		set_irq_handler(i, do_level_IRQ);
+		set_irq_chip(i, &aaec2000_irq_chip);
+		set_irq_flags(i, IRQF_VALID);
+	}
+
+	/* Disable all interrupts */
+	IRQ_INTENC = 0xffffffff;
+
+	/* Clear any pending interrupts */
+	IRQ_INTSR = IRQ_INTSR;
+}
+
+/*
+ * Time keeping
+ */
+/* IRQs are disabled before entering here from do_gettimeofday() */
+static unsigned long aaec2000_gettimeoffset(void)
+{
+	unsigned long ticks_to_match, elapsed, usec;
+
+	/* Get ticks before next timer match */
+	ticks_to_match = TIMER1_LOAD - TIMER1_VAL;
+
+	/* We need elapsed ticks since last match */
+	elapsed = LATCH - ticks_to_match;
+
+	/* Now, convert them to usec */
+	usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
+
+	return usec;
+}
+
+/* We enter here with IRQs enabled */
+static irqreturn_t
+aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	/* TODO: Check timer accuracy */
+	write_seqlock(&xtime_lock);
+
+	timer_tick(regs);
+	TIMER1_CLEAR = 1;
+
+	write_sequnlock(&xtime_lock);
+
+	return IRQ_HANDLED;
+}
+
+static struct irqaction aaec2000_timer_irq = {
+	.name		= "AAEC-2000 Timer Tick",
+	.flags		= SA_INTERRUPT,
+	.handler	= aaec2000_timer_interrupt
+};
+
+static void __init aaec2000_timer_init(void)
+{
+	/* Disable timer 1 */
+	TIMER1_CTRL = 0;
+
+	/* We have somehow to generate a 100Hz clock.
+	 * We then use the 508KHz timer in periodic mode.
+	 */
+	TIMER1_LOAD = LATCH;
+	TIMER1_CLEAR = 1; /* Clear interrupt */
+
+	setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq);
+
+	TIMER1_CTRL = TIMER_CTRL_ENABLE |
+	                TIMER_CTRL_PERIODIC |
+	                TIMER_CTRL_CLKSEL_508K;
+}
+
+struct sys_timer aaec2000_timer = {
+	.init		= aaec2000_timer_init,
+	.offset		= aaec2000_gettimeoffset,
+};
+