diff options
Diffstat (limited to 'arch/arm/mach-at91rm9200')
| -rw-r--r-- | arch/arm/mach-at91rm9200/Makefile | 9 | ||||
| -rw-r--r-- | arch/arm/mach-at91rm9200/board-csb337.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-at91rm9200/board-csb637.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-at91rm9200/board-dk.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-at91rm9200/board-ek.c | 10 | ||||
| -rw-r--r-- | arch/arm/mach-at91rm9200/devices.c | 166 | ||||
| -rw-r--r-- | arch/arm/mach-at91rm9200/leds.c | 100 |
7 files changed, 286 insertions, 15 deletions
diff --git a/arch/arm/mach-at91rm9200/Makefile b/arch/arm/mach-at91rm9200/Makefile index 75e6ee318ded..ef88c4128edc 100644 --- a/arch/arm/mach-at91rm9200/Makefile +++ b/arch/arm/mach-at91rm9200/Makefile @@ -16,11 +16,12 @@ obj-$(CONFIG_MACH_CSB637) += board-csb637.o #obj-$(CONFIG_MACH_KB9200) += board-kb9202.o # LEDs support -#led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o -#led-$(CONFIG_MACH_AT91RM9200EK) += leds.o -#led-$(CONFIG_MACH_CSB337) += leds.o -#led-$(CONFIG_MACH_CSB637) += leds.o +led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o +led-$(CONFIG_MACH_AT91RM9200EK) += leds.o +led-$(CONFIG_MACH_CSB337) += leds.o +led-$(CONFIG_MACH_CSB637) += leds.o #led-$(CONFIG_MACH_KB9200) += leds.o +#led-$(CONFIG_MACH_KAFA) += leds.o obj-$(CONFIG_LEDS) += $(led-y) # VGA support diff --git a/arch/arm/mach-at91rm9200/board-csb337.c b/arch/arm/mach-at91rm9200/board-csb337.c index 54022e58d50d..f45104ceea8f 100644 --- a/arch/arm/mach-at91rm9200/board-csb337.c +++ b/arch/arm/mach-at91rm9200/board-csb337.c @@ -67,6 +67,9 @@ static void __init csb337_map_io(void) /* Initialize clocks: 3.6864 MHz crystal */ at91_clock_init(3686400); + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + #ifdef CONFIG_SERIAL_AT91 at91_console_port = CSB337_SERIAL_CONSOLE; memcpy(at91_serial_map, serial, sizeof(serial)); diff --git a/arch/arm/mach-at91rm9200/board-csb637.c b/arch/arm/mach-at91rm9200/board-csb637.c index 8195f9d919ea..f2c2d6e79bc6 100644 --- a/arch/arm/mach-at91rm9200/board-csb637.c +++ b/arch/arm/mach-at91rm9200/board-csb637.c @@ -67,6 +67,9 @@ static void __init csb637_map_io(void) /* Initialize clocks: 3.6864 MHz crystal */ at91_clock_init(3686400); + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + #ifdef CONFIG_SERIAL_AT91 at91_console_port = CSB637_SERIAL_CONSOLE; memcpy(at91_serial_map, serial, sizeof(serial)); diff --git a/arch/arm/mach-at91rm9200/board-dk.c b/arch/arm/mach-at91rm9200/board-dk.c index 8a783368366e..2d7200ed66ed 100644 --- a/arch/arm/mach-at91rm9200/board-dk.c +++ b/arch/arm/mach-at91rm9200/board-dk.c @@ -70,6 +70,9 @@ static void __init dk_map_io(void) /* Initialize clocks: 18.432 MHz crystal */ at91_clock_init(18432000); + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); + #ifdef CONFIG_SERIAL_AT91 at91_console_port = DK_SERIAL_CONSOLE; memcpy(at91_serial_map, serial, sizeof(serial)); @@ -118,9 +121,14 @@ static void __init dk_board_init(void) at91_add_device_udc(&dk_udc_data); /* Compact Flash */ at91_add_device_cf(&dk_cf_data); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ + at91_set_gpio_output(AT91_PIN_PB7, 0); +#else /* MMC */ - at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */ + at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(&dk_mmc_data); +#endif /* VGA */ // dk_add_device_video(); } diff --git a/arch/arm/mach-at91rm9200/board-ek.c b/arch/arm/mach-at91rm9200/board-ek.c index fd0752eba897..80d90f5135a1 100644 --- a/arch/arm/mach-at91rm9200/board-ek.c +++ b/arch/arm/mach-at91rm9200/board-ek.c @@ -70,6 +70,9 @@ static void __init ek_map_io(void) /* Initialize clocks: 18.432 MHz crystal */ at91_clock_init(18432000); + /* Setup the LEDs */ + at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); + #ifdef CONFIG_SERIAL_AT91 at91_console_port = EK_SERIAL_CONSOLE; memcpy(at91_serial_map, serial, sizeof(serial)); @@ -111,9 +114,14 @@ static void __init ek_board_init(void) at91_add_device_usbh(&ek_usbh_data); /* USB Device */ at91_add_device_udc(&ek_udc_data); +#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD + /* DataFlash card */ + at91_set_gpio_output(AT91_PIN_PB22, 0); +#else /* MMC */ - at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). default: MMC */ + at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(&ek_mmc_data); +#endif /* VGA */ // ek_add_device_video(); } diff --git a/arch/arm/mach-at91rm9200/devices.c b/arch/arm/mach-at91rm9200/devices.c index 57eedd5beaf6..bfe47bd6e50c 100644 --- a/arch/arm/mach-at91rm9200/devices.c +++ b/arch/arm/mach-at91rm9200/devices.c @@ -28,10 +28,10 @@ static u64 ohci_dmamask = 0xffffffffUL; static struct at91_usbh_data usbh_data; -static struct resource at91rm9200_usbh_resource[] = { +static struct resource at91_usbh_resource[] = { [0] = { .start = AT91_UHP_BASE, - .end = AT91_UHP_BASE + SZ_1M -1, + .end = AT91_UHP_BASE + SZ_1M - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -49,8 +49,8 @@ static struct platform_device at91rm9200_usbh_device = { .coherent_dma_mask = 0xffffffff, .platform_data = &usbh_data, }, - .resource = at91rm9200_usbh_resource, - .num_resources = ARRAY_SIZE(at91rm9200_usbh_resource), + .resource = at91_usbh_resource, + .num_resources = ARRAY_SIZE(at91_usbh_resource), }; void __init at91_add_device_usbh(struct at91_usbh_data *data) @@ -121,6 +121,19 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} static u64 eth_dmamask = 0xffffffffUL; static struct at91_eth_data eth_data; +static struct resource at91_eth_resources[] = { + [0] = { + .start = AT91_BASE_EMAC, + .end = AT91_BASE_EMAC + SZ_16K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AT91_ID_EMAC, + .end = AT91_ID_EMAC, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device at91rm9200_eth_device = { .name = "at91_ether", .id = -1, @@ -129,7 +142,8 @@ static struct platform_device at91rm9200_eth_device = { .coherent_dma_mask = 0xffffffff, .platform_data = ð_data, }, - .num_resources = 0, + .resource = at91_eth_resources, + .num_resources = ARRAY_SIZE(at91_eth_resources), }; void __init at91_add_device_eth(struct at91_eth_data *data) @@ -180,13 +194,23 @@ void __init at91_add_device_eth(struct at91_eth_data *data) {} #if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) static struct at91_cf_data cf_data; +static struct resource at91_cf_resources[] = { + [0] = { + .start = AT91_CF_BASE, + /* ties up CS4, CS5, and CS6 */ + .end = AT91_CF_BASE + (0x30000000 - 1), + .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, + }, +}; + static struct platform_device at91rm9200_cf_device = { .name = "at91_cf", .id = -1, .dev = { .platform_data = &cf_data, }, - .num_resources = 0, + .resource = at91_cf_resources, + .num_resources = ARRAY_SIZE(at91_cf_resources), }; void __init at91_add_device_cf(struct at91_cf_data *data) @@ -224,15 +248,20 @@ static u64 mmc_dmamask = 0xffffffffUL; static struct at91_mmc_data mmc_data; static struct resource at91_mmc_resources[] = { - { + [0] = { .start = AT91_BASE_MCI, .end = AT91_BASE_MCI + SZ_16K - 1, .flags = IORESOURCE_MEM, - } + }, + [1] = { + .start = AT91_ID_MCI, + .end = AT91_ID_MCI, + .flags = IORESOURCE_IRQ, + }, }; static struct platform_device at91rm9200_mmc_device = { - .name = "at91rm9200_mci", + .name = "at91_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -290,4 +319,123 @@ void __init at91_add_device_mmc(struct at91_mmc_data *data) void __init at91_add_device_mmc(struct at91_mmc_data *data) {} #endif +/* -------------------------------------------------------------------- + * NAND / SmartMedia + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) +static struct at91_nand_data nand_data; + +static struct resource at91_nand_resources[] = { + { + .start = AT91_SMARTMEDIA_BASE, + .end = AT91_SMARTMEDIA_BASE + SZ_8M - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device at91_nand_device = { + .name = "at91_nand", + .id = -1, + .dev = { + .platform_data = &nand_data, + }, + .resource = at91_nand_resources, + .num_resources = ARRAY_SIZE(at91_nand_resources), +}; + +void __init at91_add_device_nand(struct at91_nand_data *data) +{ + if (!data) + return; + + /* enable pin */ + if (data->enable_pin) + at91_set_gpio_output(data->enable_pin, 1); + + /* ready/busy pin */ + if (data->rdy_pin) + at91_set_gpio_input(data->rdy_pin, 1); + + /* card detect pin */ + if (data->det_pin) + at91_set_gpio_input(data->det_pin, 1); + + at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */ + + nand_data = *data; + platform_device_register(&at91_nand_device); +} +#else +void __init at91_add_device_nand(struct at91_nand_data *data) {} +#endif + + +/* -------------------------------------------------------------------- + * TWI (i2c) + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) +static struct platform_device at91rm9200_twi_device = { + .name = "at91_i2c", + .id = -1, + .num_resources = 0, +}; + +void __init at91_add_device_i2c(void) +{ + /* pins used for TWI interface */ + at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */ + at91_set_multi_drive(AT91_PIN_PA25, 1); + + at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */ + at91_set_multi_drive(AT91_PIN_PA26, 1); + + platform_device_register(&at91rm9200_twi_device); +} +#else +void __init at91_add_device_i2c(void) {} +#endif + + +/* -------------------------------------------------------------------- + * RTC + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_AT91_RTC) || defined(CONFIG_AT91_RTC_MODULE) +static struct platform_device at91rm9200_rtc_device = { + .name = "at91_rtc", + .id = -1, + .num_resources = 0, +}; + +void __init at91_add_device_rtc(void) +{ + platform_device_register(&at91rm9200_rtc_device); +} +#else +void __init at91_add_device_rtc(void) {} +#endif + + +/* -------------------------------------------------------------------- + * LEDs + * -------------------------------------------------------------------- */ + +#if defined(CONFIG_LEDS) +u8 at91_leds_cpu; +u8 at91_leds_timer; + +void __init at91_init_leds(u8 cpu_led, u8 timer_led) +{ + at91_leds_cpu = cpu_led; + at91_leds_timer = timer_led; +} + +#else +void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} +#endif + + /* -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91rm9200/leds.c b/arch/arm/mach-at91rm9200/leds.c new file mode 100644 index 000000000000..28150e8905ba --- /dev/null +++ b/arch/arm/mach-at91rm9200/leds.c @@ -0,0 +1,100 @@ +/* + * LED driver for Atmel AT91-based boards. + * + * Copyright (C) SAN People (Pty) Ltd + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> + +#include <asm/mach-types.h> +#include <asm/leds.h> +#include <asm/arch/board.h> +#include <asm/arch/gpio.h> + + +static inline void at91_led_on(unsigned int led) +{ + at91_set_gpio_value(led, 0); +} + +static inline void at91_led_off(unsigned int led) +{ + at91_set_gpio_value(led, 1); +} + +static inline void at91_led_toggle(unsigned int led) +{ + unsigned long is_off = at91_get_gpio_value(led); + if (is_off) + at91_led_on(led); + else + at91_led_off(led); +} + + +/* + * Handle LED events. + */ +static void at91_leds_event(led_event_t evt) +{ + unsigned long flags; + + local_irq_save(flags); + + switch(evt) { + case led_start: /* System startup */ + at91_led_on(at91_leds_cpu); + break; + + case led_stop: /* System stop / suspend */ + at91_led_off(at91_leds_cpu); + break; + +#ifdef CONFIG_LEDS_TIMER + case led_timer: /* Every 50 timer ticks */ + at91_led_toggle(at91_leds_timer); + break; +#endif + +#ifdef CONFIG_LEDS_CPU + case led_idle_start: /* Entering idle state */ + at91_led_off(at91_leds_cpu); + break; + + case led_idle_end: /* Exit idle state */ + at91_led_on(at91_leds_cpu); + break; +#endif + + default: + break; + } + + local_irq_restore(flags); +} + + +static int __init leds_init(void) +{ + if (!at91_leds_timer || !at91_leds_cpu) + return -ENODEV; + + /* Enable PIO to access the LEDs */ + at91_set_gpio_output(at91_leds_timer, 1); + at91_set_gpio_output(at91_leds_cpu, 1); + + leds_event = at91_leds_event; + + leds_event(led_start); + return 0; +} + +__initcall(leds_init); |