diff options
Diffstat (limited to 'arch/arm/mach-footbridge')
| -rw-r--r-- | arch/arm/mach-footbridge/Kconfig | 48 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/Makefile | 5 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/Makefile.boot | 5 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/common.c | 79 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/dc21285.c | 80 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/dma-isa.c | 230 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/dma.c | 58 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/include/mach/dma-direct.h | 8 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/include/mach/isa-dma.h | 14 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/include/mach/memory.h | 31 | ||||
| -rw-r--r-- | arch/arm/mach-footbridge/isa.c | 14 |
11 files changed, 300 insertions, 272 deletions
diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index acc10b1caa69..b5e7cbfed119 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -1,38 +1,37 @@ # SPDX-License-Identifier: GPL-2.0-only -if ARCH_FOOTBRIDGE +menuconfig ARCH_FOOTBRIDGE + bool "FootBridge Implementations" + depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5) + depends on !(ARCH_MOXART || ARCH_GEMINI || ARCH_SA1100) + depends on ATAGS + depends on CPU_LITTLE_ENDIAN + depends on MMU + select ARCH_NO_SG_CHAIN + select CPU_SA110 + select FOOTBRIDGE + select NEED_MACH_MEMORY_H + help + Support for systems based on the DC21285 companion chip + ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder. -menu "Footbridge Implementations" +if ARCH_FOOTBRIDGE config ARCH_CATS bool "CATS" depends on UNUSED_BOARD_FILES select CLKEVT_I8253 select CLKSRC_I8253 - select FOOTBRIDGE_HOST select ISA - select ISA_DMA select FORCE_PCI help Say Y here if you intend to run this kernel on the CATS. Saying N will reduce the size of the Footbridge kernel. -config ARCH_EBSA285_ADDIN - bool "EBSA285 (addin mode)" - select ARCH_EBSA285 - select FOOTBRIDGE_ADDIN - help - Say Y here if you intend to run this kernel on the EBSA285 card - in addin mode. - - Saying N will reduce the size of the Footbridge kernel. - config ARCH_EBSA285_HOST bool "EBSA285 (host mode)" select ARCH_EBSA285 - select FOOTBRIDGE_HOST select ISA - select ISA_DMA select ARCH_MAY_HAVE_PC_FDC select FORCE_PCI help @@ -45,9 +44,7 @@ config ARCH_NETWINDER bool "NetWinder" select CLKEVT_I8253 select CLKSRC_I8253 - select FOOTBRIDGE_HOST select ISA - select ISA_DMA select FORCE_PCI help Say Y here if you intend to run this kernel on the Rebel.COM @@ -57,23 +54,12 @@ config ARCH_NETWINDER Saying N will reduce the size of the Footbridge kernel. -endmenu - # Footbridge support config FOOTBRIDGE - select ARCH_HAS_PHYS_TO_DMA - bool - -# Footbridge in host mode -config FOOTBRIDGE_HOST - bool + def_bool y select ARCH_MIGHT_HAVE_PC_SERIO + select ISA_DMA_API -# Footbridge in addin mode -config FOOTBRIDGE_ADDIN - bool - -# EBSA285 board in either host or addin mode config ARCH_EBSA285 bool diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 6262993c0555..55d570739f19 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -5,11 +5,11 @@ # Object file lists. -obj-y := common.o dma.o isa-irq.o +obj-y := common.o isa-irq.o isa.o isa-rtc.o dma-isa.o pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o -pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o +pci-$(CONFIG_ARCH_EBSA285) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o @@ -18,4 +18,3 @@ obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o obj-$(CONFIG_PCI) +=$(pci-y) -obj-$(CONFIG_ISA) += isa.o isa-rtc.o diff --git a/arch/arm/mach-footbridge/Makefile.boot b/arch/arm/mach-footbridge/Makefile.boot deleted file mode 100644 index e4313e912cac..000000000000 --- a/arch/arm/mach-footbridge/Makefile.boot +++ /dev/null @@ -1,5 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 -initrd_phys-y := 0x00800000 - diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 5020eb96b025..629e4676ed77 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -198,9 +198,6 @@ void __init footbridge_init_irq(void) __fb_init_irq(); - if (!footbridge_cfn_mode()) - return; - if (machine_is_ebsa285()) /* The following is dependent on which slot * you plug the Southbridge card into. We @@ -221,21 +218,13 @@ void __init footbridge_init_irq(void) * commented out since there is a "No Fix" problem with it. Not mapping * it means that we have extra bullet protection on our feet. */ -static struct map_desc fb_common_io_desc[] __initdata = { +static struct map_desc ebsa285_host_io_desc[] __initdata = { { .virtual = ARMCSR_BASE, .pfn = __phys_to_pfn(DC21285_ARMCSR_BASE), .length = ARMCSR_SIZE, .type = MT_DEVICE, - } -}; - -/* - * The mapping when the footbridge is in host mode. We don't map any of - * this when we are in add-in mode. - */ -static struct map_desc ebsa285_host_io_desc[] __initdata = { -#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST) + }, { .virtual = PCIMEM_BASE, .pfn = __phys_to_pfn(DC21285_PCI_MEM), @@ -257,26 +246,12 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { .length = PCIIACK_SIZE, .type = MT_DEVICE, }, -#endif }; void __init footbridge_map_io(void) { - /* - * Set up the common mapping first; we need this to - * determine whether we're in host mode or not. - */ - iotable_init(fb_common_io_desc, ARRAY_SIZE(fb_common_io_desc)); - - /* - * Now, work out what we've got to map in addition on this - * platform. - */ - if (footbridge_cfn_mode()) { - iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); - pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); - } - + iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); + pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); vga_base = PCIMEM_BASE; } @@ -306,49 +281,3 @@ void footbridge_restart(enum reboot_mode mode, const char *cmd) *CSR_SA110_CNTL |= (1 << 13); } } - -#ifdef CONFIG_FOOTBRIDGE_ADDIN - -static inline unsigned long fb_bus_sdram_offset(void) -{ - return *CSR_PCISDRAMBASE & 0xfffffff0; -} - -/* - * These two functions convert virtual addresses to PCI addresses and PCI - * addresses to virtual addresses. Note that it is only legal to use these - * on memory obtained via get_zeroed_page or kmalloc. - */ -unsigned long __virt_to_bus(unsigned long res) -{ - WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); - - return res + (fb_bus_sdram_offset() - PAGE_OFFSET); -} -EXPORT_SYMBOL(__virt_to_bus); - -unsigned long __bus_to_virt(unsigned long res) -{ - res = res - (fb_bus_sdram_offset() - PAGE_OFFSET); - - WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory); - - return res; -} -EXPORT_SYMBOL(__bus_to_virt); -#else -static inline unsigned long fb_bus_sdram_offset(void) -{ - return BUS_OFFSET; -} -#endif /* CONFIG_FOOTBRIDGE_ADDIN */ - -dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr) -{ - return paddr + (fb_bus_sdram_offset() - PHYS_OFFSET); -} - -phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr) -{ - return dev_addr - (fb_bus_sdram_offset() - PHYS_OFFSET); -} diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index f9713dc561cf..f8920d0010de 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -5,6 +5,7 @@ * Copyright (C) 1998-2001 Russell King * Copyright (C) 1998-2000 Phil Blundell */ +#include <linux/dma-map-ops.h> #include <linux/kernel.h> #include <linux/pci.h> #include <linux/interrupt.h> @@ -241,13 +242,26 @@ static irqreturn_t dc21285_parity_irq(int irq, void *dev_id) return IRQ_HANDLED; } +static int dc21285_pci_bus_notifier(struct notifier_block *nb, + unsigned long action, + void *data) +{ + if (action != BUS_NOTIFY_ADD_DEVICE) + return NOTIFY_DONE; + + dma_direct_set_offset(data, PHYS_OFFSET, BUS_OFFSET, SZ_256M); + + return NOTIFY_OK; +} + +static struct notifier_block dc21285_pci_bus_nb = { + .notifier_call = dc21285_pci_bus_notifier, +}; + int __init dc21285_setup(int nr, struct pci_sys_data *sys) { struct resource *res; - if (nr || !footbridge_cfn_mode()) - return 0; - res = kcalloc(2, sizeof(struct resource), GFP_KERNEL); if (!res) { printk("out of memory for root bus resources"); @@ -269,6 +283,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); + bus_register_notifier(&pci_bus_type, &dc21285_pci_bus_nb); + return 1; } @@ -278,7 +294,6 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) void __init dc21285_preinit(void) { unsigned int mem_size, mem_mask; - int cfn_mode; pcibios_min_mem = 0x81000000; @@ -298,21 +313,15 @@ void __init dc21285_preinit(void) *CSR_CSRBASEOFFSET = 0; *CSR_PCIADDR_EXTN = 0; - cfn_mode = __footbridge_cfn_mode(); - printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in " - "%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ? - "central function" : "addin"); - - if (footbridge_cfn_mode()) { - /* - * Clear any existing errors - we aren't - * interested in historical data... - */ - *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) | - SA110_CNTL_RXSERR; - *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS; - } + "central function mode\n", *CSR_CLASSREV & 0xff); + + /* + * Clear any existing errors - we aren't + * interested in historical data... + */ + *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) | SA110_CNTL_RXSERR; + *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS; timer_setup(&serr_timer, dc21285_enable_error, 0); timer_setup(&perr_timer, dc21285_enable_error, 0); @@ -331,29 +340,18 @@ void __init dc21285_preinit(void) dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, 0, "PCI data parity", NULL); - if (cfn_mode) { - /* - * Map our SDRAM at a known address in PCI space, just in case - * the firmware had other ideas. Using a nonzero base is - * necessary, since some VGA cards forcefully use PCI addresses - * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). - */ - *CSR_PCICSRBASE = 0xf4000000; - *CSR_PCICSRIOBASE = 0; - *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET); - *CSR_PCIROMBASE = 0; - *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | - PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS; - } else if (footbridge_cfn_mode() != 0) { - /* - * If we are not compiled to accept "add-in" mode, then - * we are using a constant virt_to_bus translation which - * can not hope to cater for the way the host BIOS has - * set up the machine. - */ - panic("PCI: this kernel is compiled for central " - "function mode only"); - } + /* + * Map our SDRAM at a known address in PCI space, just in case + * the firmware had other ideas. Using a nonzero base is + * necessary, since some VGA cards forcefully use PCI addresses + * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). + */ + *CSR_PCICSRBASE = 0xf4000000; + *CSR_PCICSRIOBASE = 0; + *CSR_PCISDRAMBASE = BUS_OFFSET; + *CSR_PCIROMBASE = 0; + *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | + PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS; } void __init dc21285_postinit(void) diff --git a/arch/arm/mach-footbridge/dma-isa.c b/arch/arm/mach-footbridge/dma-isa.c new file mode 100644 index 000000000000..937f5376d5e7 --- /dev/null +++ b/arch/arm/mach-footbridge/dma-isa.c @@ -0,0 +1,230 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 1999-2000 Russell King + * + * ISA DMA primitives + * Taken from various sources, including: + * linux/include/asm/dma.h: Defines for using and allocating dma channels. + * Written by Hennus Bergman, 1992. + * High DMA channel support & info by Hannu Savolainen and John Boyd, + * Nov. 1992. + * arch/arm/kernel/dma-ebsa285.c + * Copyright (C) 1998 Phil Blundell + */ +#include <linux/dma-map-ops.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/dma-mapping.h> +#include <linux/io.h> + +#include <asm/dma.h> +#include <asm/mach/dma.h> +#include <asm/hardware/dec21285.h> + +#define ISA_DMA_MASK 0 +#define ISA_DMA_MODE 1 +#define ISA_DMA_CLRFF 2 +#define ISA_DMA_PGHI 3 +#define ISA_DMA_PGLO 4 +#define ISA_DMA_ADDR 5 +#define ISA_DMA_COUNT 6 + +static unsigned int isa_dma_port[8][7] = { + /* MASK MODE CLRFF PAGE_HI PAGE_LO ADDR COUNT */ + { 0x0a, 0x0b, 0x0c, 0x487, 0x087, 0x00, 0x01 }, + { 0x0a, 0x0b, 0x0c, 0x483, 0x083, 0x02, 0x03 }, + { 0x0a, 0x0b, 0x0c, 0x481, 0x081, 0x04, 0x05 }, + { 0x0a, 0x0b, 0x0c, 0x482, 0x082, 0x06, 0x07 }, + { 0xd4, 0xd6, 0xd8, 0x000, 0x000, 0xc0, 0xc2 }, + { 0xd4, 0xd6, 0xd8, 0x48b, 0x08b, 0xc4, 0xc6 }, + { 0xd4, 0xd6, 0xd8, 0x489, 0x089, 0xc8, 0xca }, + { 0xd4, 0xd6, 0xd8, 0x48a, 0x08a, 0xcc, 0xce } +}; + +static int isa_get_dma_residue(unsigned int chan, dma_t *dma) +{ + unsigned int io_port = isa_dma_port[chan][ISA_DMA_COUNT]; + int count; + + count = 1 + inb(io_port); + count |= inb(io_port) << 8; + + return chan < 4 ? count : (count << 1); +} + +static struct device isa_dma_dev = { + .init_name = "fallback device", + .coherent_dma_mask = ~(dma_addr_t)0, + .dma_mask = &isa_dma_dev.coherent_dma_mask, +}; + +static void isa_enable_dma(unsigned int chan, dma_t *dma) +{ + if (dma->invalid) { + unsigned long address, length; + unsigned int mode; + enum dma_data_direction direction; + + mode = (chan & 3) | dma->dma_mode; + switch (dma->dma_mode & DMA_MODE_MASK) { + case DMA_MODE_READ: + direction = DMA_FROM_DEVICE; + break; + + case DMA_MODE_WRITE: + direction = DMA_TO_DEVICE; + break; + + case DMA_MODE_CASCADE: + direction = DMA_BIDIRECTIONAL; + break; + + default: + direction = DMA_NONE; + break; + } + + if (!dma->sg) { + /* + * Cope with ISA-style drivers which expect cache + * coherence. + */ + dma->sg = &dma->buf; + dma->sgcount = 1; + dma->buf.length = dma->count; + dma->buf.dma_address = dma_map_single(&isa_dma_dev, + dma->addr, dma->count, + direction); + } + + address = dma->buf.dma_address; + length = dma->buf.length - 1; + + outb(address >> 16, isa_dma_port[chan][ISA_DMA_PGLO]); + outb(address >> 24, isa_dma_port[chan][ISA_DMA_PGHI]); + + if (chan >= 4) { + address >>= 1; + length >>= 1; + } + + outb(0, isa_dma_port[chan][ISA_DMA_CLRFF]); + + outb(address, isa_dma_port[chan][ISA_DMA_ADDR]); + outb(address >> 8, isa_dma_port[chan][ISA_DMA_ADDR]); + + outb(length, isa_dma_port[chan][ISA_DMA_COUNT]); + outb(length >> 8, isa_dma_port[chan][ISA_DMA_COUNT]); + + outb(mode, isa_dma_port[chan][ISA_DMA_MODE]); + dma->invalid = 0; + } + outb(chan & 3, isa_dma_port[chan][ISA_DMA_MASK]); +} + +static void isa_disable_dma(unsigned int chan, dma_t *dma) +{ + outb(chan | 4, isa_dma_port[chan][ISA_DMA_MASK]); +} + +static struct dma_ops isa_dma_ops = { + .type = "ISA", + .enable = isa_enable_dma, + .disable = isa_disable_dma, + .residue = isa_get_dma_residue, +}; + +static struct resource dma_resources[] = { { + .name = "dma1", + .start = 0x0000, + .end = 0x000f +}, { + .name = "dma low page", + .start = 0x0080, + .end = 0x008f +}, { + .name = "dma2", + .start = 0x00c0, + .end = 0x00df +}, { + .name = "dma high page", + .start = 0x0480, + .end = 0x048f +} }; + +static dma_t isa_dma[8]; + +/* + * ISA DMA always starts at channel 0 + */ +static int __init isa_dma_init(void) +{ + /* + * Try to autodetect presence of an ISA DMA controller. + * We do some minimal initialisation, and check that + * channel 0's DMA address registers are writeable. + */ + outb(0xff, 0x0d); + outb(0xff, 0xda); + + /* + * Write high and low address, and then read them back + * in the same order. + */ + outb(0x55, 0x00); + outb(0xaa, 0x00); + + if (inb(0) == 0x55 && inb(0) == 0xaa) { + unsigned int chan, i; + + for (chan = 0; chan < 8; chan++) { + isa_dma[chan].d_ops = &isa_dma_ops; + isa_disable_dma(chan, NULL); + } + + outb(0x40, 0x0b); + outb(0x41, 0x0b); + outb(0x42, 0x0b); + outb(0x43, 0x0b); + + outb(0xc0, 0xd6); + outb(0x41, 0xd6); + outb(0x42, 0xd6); + outb(0x43, 0xd6); + + outb(0, 0xd4); + + outb(0x10, 0x08); + outb(0x10, 0xd0); + + /* + * Is this correct? According to my documentation, it + * doesn't appear to be. It should be: + * outb(0x3f, 0x40b); outb(0x3f, 0x4d6); + */ + outb(0x30, 0x40b); + outb(0x31, 0x40b); + outb(0x32, 0x40b); + outb(0x33, 0x40b); + outb(0x31, 0x4d6); + outb(0x32, 0x4d6); + outb(0x33, 0x4d6); + + for (i = 0; i < ARRAY_SIZE(dma_resources); i++) + request_resource(&ioport_resource, dma_resources + i); + + for (chan = 0; chan < 8; chan++) { + int ret = isa_dma_add(chan, &isa_dma[chan]); + if (ret) + pr_err("ISADMA%u: unable to register: %d\n", + chan, ret); + } + + request_dma(DMA_ISA_CASCADE, "cascade"); + } + + dma_direct_set_offset(&isa_dma_dev, PHYS_OFFSET, BUS_OFFSET, SZ_256M); + + return 0; +} +core_initcall(isa_dma_init); diff --git a/arch/arm/mach-footbridge/dma.c b/arch/arm/mach-footbridge/dma.c deleted file mode 100644 index 86618074a7a5..000000000000 --- a/arch/arm/mach-footbridge/dma.c +++ /dev/null @@ -1,58 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/arm/kernel/dma-ebsa285.c - * - * Copyright (C) 1998 Phil Blundell - * - * DMA functions specific to EBSA-285/CATS architectures - * - * Changelog: - * 09-Nov-1998 RMK Split out ISA DMA functions to dma-isa.c - * 17-Mar-1999 RMK Allow any EBSA285-like architecture to have - * ISA DMA controllers. - */ -#include <linux/init.h> -#include <linux/io.h> -#include <linux/spinlock.h> -#include <linux/scatterlist.h> - -#include <asm/dma.h> - -#include <asm/mach/dma.h> -#include <asm/hardware/dec21285.h> - -#if 0 -static int fb_dma_request(unsigned int chan, dma_t *dma) -{ - return -EINVAL; -} - -static void fb_dma_enable(unsigned int chan, dma_t *dma) -{ -} - -static void fb_dma_disable(unsigned int chan, dma_t *dma) -{ -} - -static struct dma_ops fb_dma_ops = { - .type = "fb", - .request = fb_dma_request, - .enable = fb_dma_enable, - .disable = fb_dma_disable, -}; -#endif - -static int __init fb_dma_init(void) -{ -#if 0 - dma[_DC21285_DMA(0)].d_ops = &fb_dma_ops; - dma[_DC21285_DMA(1)].d_ops = &fb_dma_ops; -#endif -#ifdef CONFIG_ISA_DMA - if (footbridge_cfn_mode()) - isa_init_dma(); -#endif - return 0; -} -core_initcall(fb_dma_init); diff --git a/arch/arm/mach-footbridge/include/mach/dma-direct.h b/arch/arm/mach-footbridge/include/mach/dma-direct.h deleted file mode 100644 index 01f9e8367c00..000000000000 --- a/arch/arm/mach-footbridge/include/mach/dma-direct.h +++ /dev/null @@ -1,8 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef MACH_FOOTBRIDGE_DMA_DIRECT_H -#define MACH_FOOTBRIDGE_DMA_DIRECT_H 1 - -dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr); -phys_addr_t dma_to_phys(struct device *dev, dma_addr_t dev_addr); - -#endif /* MACH_FOOTBRIDGE_DMA_DIRECT_H */ diff --git a/arch/arm/mach-footbridge/include/mach/isa-dma.h b/arch/arm/mach-footbridge/include/mach/isa-dma.h index 8a1b991076e1..b10731a1f66a 100644 --- a/arch/arm/mach-footbridge/include/mach/isa-dma.h +++ b/arch/arm/mach-footbridge/include/mach/isa-dma.h @@ -10,17 +10,9 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -/* - * The 21285 has two internal DMA channels; we call these 8 and 9. - * On CATS hardware we have an additional eight ISA dma channels - * numbered 0..7. - */ -#define _ISA_DMA(x) (0+(x)) -#define _DC21285_DMA(x) (8+(x)) - -#define MAX_DMA_CHANNELS 10 +#define MAX_DMA_CHANNELS 8 -#define DMA_FLOPPY _ISA_DMA(2) -#define DMA_ISA_CASCADE _ISA_DMA(4) +#define DMA_FLOPPY (2) +#define DMA_ISA_CASCADE (4) #endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h index 3a5d2638c18f..9516877667d7 100644 --- a/arch/arm/mach-footbridge/include/mach/memory.h +++ b/arch/arm/mach-footbridge/include/mach/memory.h @@ -16,37 +16,6 @@ #ifndef __ASM_ARCH_MEMORY_H #define __ASM_ARCH_MEMORY_H - -#if defined(CONFIG_FOOTBRIDGE_ADDIN) -/* - * If we may be using add-in footbridge mode, then we must - * use the out-of-line translation that makes use of the - * PCI BAR - */ -#ifndef __ASSEMBLY__ -extern unsigned long __virt_to_bus(unsigned long); -extern unsigned long __bus_to_virt(unsigned long); -#endif -#define __virt_to_bus __virt_to_bus -#define __bus_to_virt __bus_to_virt - -#elif defined(CONFIG_FOOTBRIDGE_HOST) - -/* - * The footbridge is programmed to expose the system RAM at 0xe0000000. - * The requirement is that the RAM isn't placed at bus address 0, which - * would clash with VGA cards. - */ -#define BUS_OFFSET 0xe0000000 -#define __virt_to_bus(x) ((x) + (BUS_OFFSET - PAGE_OFFSET)) -#define __bus_to_virt(x) ((x) - (BUS_OFFSET - PAGE_OFFSET)) - -#else - -#error "Undefined footbridge mode" - -#endif - /* * Cache flushing area. */ diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c index ec5af521cf95..84caccddce44 100644 --- a/arch/arm/mach-footbridge/isa.c +++ b/arch/arm/mach-footbridge/isa.c @@ -79,16 +79,12 @@ static int __init footbridge_isa_init(void) { int err = 0; - if (!footbridge_cfn_mode()) - return 0; - /* Personal server doesn't have RTC */ - if (!machine_is_personal_server()) { - isa_rtc_init(); - err = platform_device_register(&rtc_device); - if (err) - printk(KERN_ERR "Unable to register RTC device: %d\n", err); - } + isa_rtc_init(); + err = platform_device_register(&rtc_device); + if (err) + printk(KERN_ERR "Unable to register RTC device: %d\n", err); + err = platform_device_register(&serial_device); if (err) printk(KERN_ERR "Unable to register serial device: %d\n", err); |