diff options
Diffstat (limited to 'arch/arm/mach-ixp4xx')
| -rw-r--r-- | arch/arm/mach-ixp4xx/Kconfig | 86 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/Makefile | 19 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/Makefile.boot | 4 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/common-pci.c | 451 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/common.c | 448 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/gateway7001-pci.c | 61 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/gateway7001-setup.c | 113 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/goramo_mlr.c | 532 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/include/mach/hardware.h | 32 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/include/mach/io.h | 545 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h | 303 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/include/mach/platform.h | 102 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/include/mach/udc.h | 8 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/include/mach/uncompress.h | 52 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/irqs.h | 64 | ||||
| -rw-r--r-- | arch/arm/mach-ixp4xx/ixp4xx-of.c | 2 |
16 files changed, 15 insertions, 2807 deletions
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index 4c787b4be62b..cb46802f5ce5 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -1,79 +1,19 @@ # SPDX-License-Identifier: GPL-2.0-only -if ARCH_IXP4XX - -menu "Intel IXP4xx Implementation Options" - -comment "IXP4xx Platforms" - -config MACH_IXP4XX_OF - bool - prompt "Device Tree IXP4xx boards" - default y +menuconfig ARCH_IXP4XX + bool "IXP4xx-based platforms" + depends on ARCH_MULTI_V5 + depends on CPU_BIG_ENDIAN select ARM_APPENDED_DTB # Old Redboot bootloaders deployed + select CPU_XSCALE + select GPIO_IXP4XX + select GPIOLIB + select FORCE_PCI select I2C select I2C_IOP3XX - select PCI + select IXP4XX_IRQ + select IXP4XX_TIMER + select USB_EHCI_BIG_ENDIAN_DESC + select USB_EHCI_BIG_ENDIAN_MMIO select USE_OF help - Say 'Y' here to support Device Tree-based IXP4xx platforms. - -config MACH_GATEWAY7001 - bool "Gateway 7001" - depends on IXP4XX_PCI_LEGACY - help - Say 'Y' here if you want your kernel to support Gateway's - 7001 Access Point. For more information on this platform, - see http://openwrt.org - -config MACH_GORAMO_MLR - bool "GORAMO Multi Link Router" - depends on IXP4XX_PCI_LEGACY - help - Say 'Y' here if you want your kernel to support GORAMO - MultiLink router. - -config ARCH_PRPMC1100 - bool "PrPMC1100" - help - Say 'Y' here if you want your kernel to support the Motorola - PrPCM1100 Processor Mezanine Module. For more information on - this platform, see <file:Documentation/arm/ixp4xx.rst>. - -comment "IXP4xx Options" - -config IXP4XX_PCI_LEGACY - bool "IXP4xx legacy PCI driver support" - depends on PCI - help - Selects legacy PCI driver. - Not recommended for new development. - -config IXP4XX_INDIRECT_PCI - bool "Use indirect PCI memory access" - depends on IXP4XX_PCI_LEGACY - help - IXP4xx provides two methods of accessing PCI memory space: - - 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). - To access PCI via this space, we simply ioremap() the BAR - into the kernel and we can use the standard read[bwl]/write[bwl] - macros. This is the preferred method due to speed but it - limits the system to just 64MB of PCI memory. This can be - problematic if using video cards and other memory-heavy devices. - - 2) If > 64MB of memory space is required, the IXP4xx can be - configured to use indirect registers to access the whole PCI - memory space. This currently allows for up to 1 GB (0x10000000 - to 0x4FFFFFFF) of memory on the bus. The disadvantage of this - is that every PCI access requires three local register accesses - plus a spinlock, but in some cases the performance hit is - acceptable. In addition, you cannot mmap() PCI devices in this - case due to the indirect nature of the PCI window. - - By default, the direct method is used. Choose this option if you - need to use the indirect method instead. If you don't know - what you need, leave this option unselected. - -endmenu - -endif + Support for Intel's IXP4XX (XScale) family of processors. diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile index b241094c9649..3d1c9d854c7f 100644 --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile @@ -1,19 +1,2 @@ # SPDX-License-Identifier: GPL-2.0 -# -# Makefile for the linux kernel. -# - -obj-pci-y := -obj-pci-n := - -# Device tree platform -obj-pci-$(CONFIG_MACH_IXP4XX_OF) += ixp4xx-of.o - -obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o - -obj-y += common.o - -obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o -obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o - -obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o +obj-y += ixp4xx-of.o diff --git a/arch/arm/mach-ixp4xx/Makefile.boot b/arch/arm/mach-ixp4xx/Makefile.boot deleted file mode 100644 index 9b015bd1ef27..000000000000 --- a/arch/arm/mach-ixp4xx/Makefile.boot +++ /dev/null @@ -1,4 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0x00008000 -params_phys-y := 0x00000100 - diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c deleted file mode 100644 index 893c19c254e3..000000000000 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ /dev/null @@ -1,451 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arm/mach-ixp4xx/common-pci.c - * - * IXP4XX PCI routines for all platforms - * - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003 Greg Ungerer <gerg@snapgear.com> - * Copyright (C) 2003-2004 MontaVista Software, Inc. - */ - -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/interrupt.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/ioport.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/io.h> -#include <linux/export.h> -#include <asm/dma-mapping.h> - -#include <asm/cputype.h> -#include <asm/irq.h> -#include <linux/sizes.h> -#include <asm/mach/pci.h> -#include <mach/hardware.h> - - -/* - * IXP4xx PCI read function is dependent on whether we are - * running A0 or B0 (AppleGate) silicon. - */ -int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); - -/* - * Base address for PCI register region - */ -unsigned long ixp4xx_pci_reg_base = 0; - -/* - * PCI cfg an I/O routines are done by programming a - * command/byte enable register, and then read/writing - * the data from a data register. We need to ensure - * these transactions are atomic or we will end up - * with corrupt data on the bus or in a driver. - */ -static DEFINE_RAW_SPINLOCK(ixp4xx_pci_lock); - -/* - * Read from PCI config space - */ -static void crp_read(u32 ad_cbe, u32 *data) -{ - unsigned long flags; - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - *PCI_CRP_AD_CBE = ad_cbe; - *data = *PCI_CRP_RDATA; - raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); -} - -/* - * Write to PCI config space - */ -static void crp_write(u32 ad_cbe, u32 data) -{ - unsigned long flags; - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - *PCI_CRP_AD_CBE = CRP_AD_CBE_WRITE | ad_cbe; - *PCI_CRP_WDATA = data; - raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); -} - -static inline int check_master_abort(void) -{ - /* check Master Abort bit after access */ - unsigned long isr = *PCI_ISR; - - if (isr & PCI_ISR_PFE) { - /* make sure the Master Abort bit is reset */ - *PCI_ISR = PCI_ISR_PFE; - pr_debug("%s failed\n", __func__); - return 1; - } - - return 0; -} - -int ixp4xx_pci_read_errata(u32 addr, u32 cmd, u32* data) -{ - unsigned long flags; - int retval = 0; - int i; - - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - - *PCI_NP_AD = addr; - - /* - * PCI workaround - only works if NP PCI space reads have - * no side effects!!! Read 8 times. last one will be good. - */ - for (i = 0; i < 8; i++) { - *PCI_NP_CBE = cmd; - *data = *PCI_NP_RDATA; - *data = *PCI_NP_RDATA; - } - - if(check_master_abort()) - retval = 1; - - raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); - return retval; -} - -int ixp4xx_pci_read_no_errata(u32 addr, u32 cmd, u32* data) -{ - unsigned long flags; - int retval = 0; - - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - - *PCI_NP_AD = addr; - - /* set up and execute the read */ - *PCI_NP_CBE = cmd; - - /* the result of the read is now in NP_RDATA */ - *data = *PCI_NP_RDATA; - - if(check_master_abort()) - retval = 1; - - raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); - return retval; -} - -int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data) -{ - unsigned long flags; - int retval = 0; - - raw_spin_lock_irqsave(&ixp4xx_pci_lock, flags); - - *PCI_NP_AD = addr; - - /* set up the write */ - *PCI_NP_CBE = cmd; - - /* execute the write by writing to NP_WDATA */ - *PCI_NP_WDATA = data; - - if(check_master_abort()) - retval = 1; - - raw_spin_unlock_irqrestore(&ixp4xx_pci_lock, flags); - return retval; -} - -static u32 ixp4xx_config_addr(u8 bus_num, u16 devfn, int where) -{ - u32 addr; - if (!bus_num) { - /* type 0 */ - addr = BIT(32-PCI_SLOT(devfn)) | ((PCI_FUNC(devfn)) << 8) | - (where & ~3); - } else { - /* type 1 */ - addr = (bus_num << 16) | ((PCI_SLOT(devfn)) << 11) | - ((PCI_FUNC(devfn)) << 8) | (where & ~3) | 1; - } - return addr; -} - -/* - * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes. - * 0 and 3 are not valid indexes... - */ -static u32 bytemask[] = { - /*0*/ 0, - /*1*/ 0xff, - /*2*/ 0xffff, - /*3*/ 0, - /*4*/ 0xffffffff, -}; - -static u32 local_byte_lane_enable_bits(u32 n, int size) -{ - if (size == 1) - return (0xf & ~BIT(n)) << CRP_AD_CBE_BESL; - if (size == 2) - return (0xf & ~(BIT(n) | BIT(n+1))) << CRP_AD_CBE_BESL; - if (size == 4) - return 0; - return 0xffffffff; -} - -static int local_read_config(int where, int size, u32 *value) -{ - u32 n, data; - pr_debug("local_read_config from %d size %d\n", where, size); - n = where % 4; - crp_read(where & ~3, &data); - *value = (data >> (8*n)) & bytemask[size]; - pr_debug("local_read_config read %#x\n", *value); - return PCIBIOS_SUCCESSFUL; -} - -static int local_write_config(int where, int size, u32 value) -{ - u32 n, byte_enables, data; - pr_debug("local_write_config %#x to %d size %d\n", value, where, size); - n = where % 4; - byte_enables = local_byte_lane_enable_bits(n, size); - if (byte_enables == 0xffffffff) - return PCIBIOS_BAD_REGISTER_NUMBER; - data = value << (8*n); - crp_write((where & ~3) | byte_enables, data); - return PCIBIOS_SUCCESSFUL; -} - -static u32 byte_lane_enable_bits(u32 n, int size) -{ - if (size == 1) - return (0xf & ~BIT(n)) << 4; - if (size == 2) - return (0xf & ~(BIT(n) | BIT(n+1))) << 4; - if (size == 4) - return 0; - return 0xffffffff; -} - -static int ixp4xx_pci_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) -{ - u32 n, byte_enables, addr, data; - u8 bus_num = bus->number; - - pr_debug("read_config from %d size %d dev %d:%d:%d\n", where, size, - bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn)); - - *value = 0xffffffff; - n = where % 4; - byte_enables = byte_lane_enable_bits(n, size); - if (byte_enables == 0xffffffff) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ixp4xx_config_addr(bus_num, devfn, where); - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_CONFIGREAD, &data)) - return PCIBIOS_DEVICE_NOT_FOUND; - - *value = (data >> (8*n)) & bytemask[size]; - pr_debug("read_config_byte read %#x\n", *value); - return PCIBIOS_SUCCESSFUL; -} - -static int ixp4xx_pci_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) -{ - u32 n, byte_enables, addr, data; - u8 bus_num = bus->number; - - pr_debug("write_config_byte %#x to %d size %d dev %d:%d:%d\n", value, where, - size, bus_num, PCI_SLOT(devfn), PCI_FUNC(devfn)); - - n = where % 4; - byte_enables = byte_lane_enable_bits(n, size); - if (byte_enables == 0xffffffff) - return PCIBIOS_BAD_REGISTER_NUMBER; - - addr = ixp4xx_config_addr(bus_num, devfn, where); - data = value << (8*n); - if (ixp4xx_pci_write(addr, byte_enables | NP_CMD_CONFIGWRITE, data)) - return PCIBIOS_DEVICE_NOT_FOUND; - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops ixp4xx_ops = { - .read = ixp4xx_pci_read_config, - .write = ixp4xx_pci_write_config, -}; - -/* - * PCI abort handler - */ -static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs) -{ - u32 isr, status; - - isr = *PCI_ISR; - local_read_config(PCI_STATUS, 2, &status); - pr_debug("PCI: abort_handler addr = %#lx, isr = %#x, " - "status = %#x\n", addr, isr, status); - - /* make sure the Master Abort bit is reset */ - *PCI_ISR = PCI_ISR_PFE; - status |= PCI_STATUS_REC_MASTER_ABORT; - local_write_config(PCI_STATUS, 2, status); - - /* - * If it was an imprecise abort, then we need to correct the - * return address to be _after_ the instruction. - */ - if (fsr & (1 << 10)) - regs->ARM_pc += 4; - - return 0; -} - -void __init ixp4xx_pci_preinit(void) -{ - unsigned long cpuid = read_cpuid_id(); - -#ifdef CONFIG_IXP4XX_INDIRECT_PCI - pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */ -#else - pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */ -#endif - /* - * Determine which PCI read method to use. - * Rev 0 IXP425 requires workaround. - */ - if (!(cpuid & 0xf) && cpu_is_ixp42x()) { - printk("PCI: IXP42x A0 silicon detected - " - "PCI Non-Prefetch Workaround Enabled\n"); - ixp4xx_pci_read = ixp4xx_pci_read_errata; - } else - ixp4xx_pci_read = ixp4xx_pci_read_no_errata; - - - /* hook in our fault handler for PCI errors */ - hook_fault_code(16+6, abort_handler, SIGBUS, 0, - "imprecise external abort"); - - pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n"); - - /* - * We use identity AHB->PCI address translation - * in the 0x48000000 to 0x4bffffff address space - */ - *PCI_PCIMEMBASE = 0x48494A4B; - - /* - * We also use identity PCI->AHB address translation - * in 4 16MB BARs that begin at the physical memory start - */ - *PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + - ((PHYS_OFFSET & 0xFF000000) >> 8) + - ((PHYS_OFFSET & 0xFF000000) >> 16) + - ((PHYS_OFFSET & 0xFF000000) >> 24) + - 0x00010203; - - if (*PCI_CSR & PCI_CSR_HOST) { - printk("PCI: IXP4xx is host\n"); - - pr_debug("setup BARs in controller\n"); - - /* - * We configure the PCI inbound memory windows to be - * 1:1 mapped to SDRAM - */ - local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET); - local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M); - local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M); - local_write_config(PCI_BASE_ADDRESS_3, 4, - PHYS_OFFSET + SZ_32M + SZ_16M); - - /* - * Enable CSR window at 64 MiB to allow PCI masters - * to continue prefetching past 64 MiB boundary. - */ - local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M); - - /* - * Enable the IO window to be way up high, at 0xfffffc00 - */ - local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01); - local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */ - } else { - printk("PCI: IXP4xx is target - No bus scan performed\n"); - } - - printk("PCI: IXP4xx Using %s access for memory space\n", -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - "direct" -#else - "indirect" -#endif - ); - - pr_debug("clear error bits in ISR\n"); - *PCI_ISR = PCI_ISR_PSE | PCI_ISR_PFE | PCI_ISR_PPE | PCI_ISR_AHBE; - - /* - * Set Initialize Complete in PCI Control Register: allow IXP4XX to - * respond to PCI configuration cycles. Specify that the AHB bus is - * operating in big endian mode. Set up byte lane swapping between - * little-endian PCI and the big-endian AHB bus - */ -#ifdef __ARMEB__ - *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE | PCI_CSR_PDS | PCI_CSR_ADS; -#else - *PCI_CSR = PCI_CSR_IC | PCI_CSR_ABE; -#endif - - pr_debug("DONE\n"); -} - -int ixp4xx_setup(int nr, struct pci_sys_data *sys) -{ - struct resource *res; - - if (nr >= 1) - return 0; - - res = kcalloc(2, sizeof(*res), GFP_KERNEL); - if (res == NULL) { - /* - * If we're out of memory this early, something is wrong, - * so we might as well catch it here. - */ - panic("PCI: unable to allocate resources?\n"); - } - - local_write_config(PCI_COMMAND, 2, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); - - res[0].name = "PCI I/O Space"; - res[0].start = 0x00000000; - res[0].end = 0x0000ffff; - res[0].flags = IORESOURCE_IO; - - res[1].name = "PCI Memory Space"; - res[1].start = PCIBIOS_MIN_MEM; - res[1].end = PCIBIOS_MAX_MEM; - res[1].flags = IORESOURCE_MEM; - - request_resource(&ioport_resource, &res[0]); - request_resource(&iomem_resource, &res[1]); - - pci_add_resource_offset(&sys->resources, &res[0], sys->io_offset); - pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); - - return 1; -} - -EXPORT_SYMBOL(ixp4xx_pci_read); -EXPORT_SYMBOL(ixp4xx_pci_write); diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c deleted file mode 100644 index cdc720f54daa..000000000000 --- a/arch/arm/mach-ixp4xx/common.c +++ /dev/null @@ -1,448 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/common.c - * - * Generic code shared across all IXP4XX platforms - * - * Maintainer: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright 2002 (c) Intel Corporation - * Copyright 2003-2004 (c) MontaVista, Software, Inc. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/platform_device.h> -#include <linux/serial_core.h> -#include <linux/interrupt.h> -#include <linux/bitops.h> -#include <linux/io.h> -#include <linux/export.h> -#include <linux/cpu.h> -#include <linux/pci.h> -#include <linux/sched_clock.h> -#include <linux/soc/ixp4xx/cpu.h> -#include <linux/irqchip/irq-ixp4xx.h> -#include <linux/platform_data/timer-ixp4xx.h> -#include <linux/dma-map-ops.h> -#include <mach/udc.h> -#include <mach/hardware.h> -#include <linux/uaccess.h> -#include <asm/page.h> -#include <asm/exception.h> -#include <asm/irq.h> -#include <asm/system_misc.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/time.h> - -#include "irqs.h" - -u32 ixp4xx_read_feature_bits(void) -{ - u32 val = ~__raw_readl(IXP4XX_EXP_CFG2); - - if (cpu_is_ixp42x_rev_a0()) - return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP | - IXP4XX_FEATURE_AES); - if (cpu_is_ixp42x()) - return val & IXP42X_FEATURE_MASK; - if (cpu_is_ixp43x()) - return val & IXP43X_FEATURE_MASK; - return val & IXP46X_FEATURE_MASK; -} -EXPORT_SYMBOL(ixp4xx_read_feature_bits); - -void ixp4xx_write_feature_bits(u32 value) -{ - __raw_writel(~value, IXP4XX_EXP_CFG2); -} -EXPORT_SYMBOL(ixp4xx_write_feature_bits); - -#define IXP4XX_TIMER_FREQ 66666000 - -/************************************************************************* - * IXP4xx chipset I/O mapping - *************************************************************************/ -static struct map_desc ixp4xx_io_desc[] __initdata = { - { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */ - .virtual = (unsigned long)IXP4XX_PERIPHERAL_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS), - .length = IXP4XX_PERIPHERAL_REGION_SIZE, - .type = MT_DEVICE - }, { /* Expansion Bus Config Registers */ - .virtual = (unsigned long)IXP4XX_EXP_CFG_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), - .length = IXP4XX_EXP_CFG_REGION_SIZE, - .type = MT_DEVICE - }, { /* PCI Registers */ - .virtual = (unsigned long)IXP4XX_PCI_CFG_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), - .length = IXP4XX_PCI_CFG_REGION_SIZE, - .type = MT_DEVICE - }, -}; - -void __init ixp4xx_map_io(void) -{ - iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); -} - -void __init ixp4xx_init_irq(void) -{ - /* - * ixp4xx does not implement the XScale PWRMODE register - * so it must not call cpu_do_idle(). - */ - cpu_idle_poll_ctrl(true); - - ixp4xx_irq_init(IXP4XX_INTC_BASE_PHYS, - (cpu_is_ixp46x() || cpu_is_ixp43x())); -} - -void __init ixp4xx_timer_init(void) -{ - return ixp4xx_timer_setup(IXP4XX_TIMER_BASE_PHYS, - IRQ_IXP4XX_TIMER1, - IXP4XX_TIMER_FREQ); -} - -static struct pxa2xx_udc_mach_info ixp4xx_udc_info; - -void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info) -{ - memcpy(&ixp4xx_udc_info, info, sizeof *info); -} - -static struct resource ixp4xx_udc_resources[] = { - [0] = { - .start = 0xc800b000, - .end = 0xc800bfff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IXP4XX_USB, - .end = IRQ_IXP4XX_USB, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource ixp4xx_gpio_resource[] = { - { - .start = IXP4XX_GPIO_BASE_PHYS, - .end = IXP4XX_GPIO_BASE_PHYS + 0xfff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ixp4xx_gpio_device = { - .name = "ixp4xx-gpio", - .id = -1, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ixp4xx_gpio_resource, - .num_resources = ARRAY_SIZE(ixp4xx_gpio_resource), -}; - -/* - * USB device controller. The IXP4xx uses the same controller as PXA25X, - * so we just use the same device. - */ -static struct platform_device ixp4xx_udc_device = { - .name = "pxa25x-udc", - .id = -1, - .num_resources = 2, - .resource = ixp4xx_udc_resources, - .dev = { - .platform_data = &ixp4xx_udc_info, - }, -}; - -static struct resource ixp4xx_npe_resources[] = { - { - .start = IXP4XX_NPEA_BASE_PHYS, - .end = IXP4XX_NPEA_BASE_PHYS + 0xfff, - .flags = IORESOURCE_MEM, - }, - { - .start = IXP4XX_NPEB_BASE_PHYS, - .end = IXP4XX_NPEB_BASE_PHYS + 0xfff, - .flags = IORESOURCE_MEM, - }, - { - .start = IXP4XX_NPEC_BASE_PHYS, - .end = IXP4XX_NPEC_BASE_PHYS + 0xfff, - .flags = IORESOURCE_MEM, - }, - -}; - -static struct platform_device ixp4xx_npe_device = { - .name = "ixp4xx-npe", - .id = -1, - .num_resources = ARRAY_SIZE(ixp4xx_npe_resources), - .resource = ixp4xx_npe_resources, -}; - -static struct resource ixp4xx_qmgr_resources[] = { - { - .start = IXP4XX_QMGR_BASE_PHYS, - .end = IXP4XX_QMGR_BASE_PHYS + 0x3fff, - .flags = IORESOURCE_MEM, - }, - { - .start = IRQ_IXP4XX_QM1, - .end = IRQ_IXP4XX_QM1, - .flags = IORESOURCE_IRQ, - }, - { - .start = IRQ_IXP4XX_QM2, - .end = IRQ_IXP4XX_QM2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ixp4xx_qmgr_device = { - .name = "ixp4xx-qmgr", - .id = -1, - .num_resources = ARRAY_SIZE(ixp4xx_qmgr_resources), - .resource = ixp4xx_qmgr_resources, -}; - -static struct platform_device *ixp4xx_devices[] __initdata = { - &ixp4xx_npe_device, - &ixp4xx_qmgr_device, - &ixp4xx_gpio_device, - &ixp4xx_udc_device, -}; - -static struct resource ixp46x_i2c_resources[] = { - [0] = { - .start = 0xc8011000, - .end = 0xc801101c, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IXP4XX_I2C, - .end = IRQ_IXP4XX_I2C, - .flags = IORESOURCE_IRQ - } -}; - -/* A single 32-bit register on IXP46x */ -#define IXP4XX_HWRANDOM_BASE_PHYS 0x70002100 - -static struct resource ixp46x_hwrandom_resource[] = { - { - .start = IXP4XX_HWRANDOM_BASE_PHYS, - .end = IXP4XX_HWRANDOM_BASE_PHYS + 0x3, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ixp46x_hwrandom_device = { - .name = "ixp4xx-hwrandom", - .id = -1, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = ixp46x_hwrandom_resource, - .num_resources = ARRAY_SIZE(ixp46x_hwrandom_resource), -}; - -/* - * I2C controller. The IXP46x uses the same block as the IOP3xx, so - * we just use the same device name. - */ -static struct platform_device ixp46x_i2c_controller = { - .name = "IOP3xx-I2C", - .id = 0, - .num_resources = 2, - .resource = ixp46x_i2c_resources -}; - -static struct resource ixp46x_ptp_resources[] = { - DEFINE_RES_MEM(IXP4XX_TIMESYNC_BASE_PHYS, SZ_4K), - DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO8, "master"), - DEFINE_RES_IRQ_NAMED(IRQ_IXP4XX_GPIO7, "slave"), -}; - -static struct platform_device ixp46x_ptp = { - .name = "ptp-ixp46x", - .id = -1, - .resource = ixp46x_ptp_resources, - .num_resources = ARRAY_SIZE(ixp46x_ptp_resources), -}; - -static struct platform_device *ixp46x_devices[] __initdata = { - &ixp46x_hwrandom_device, - &ixp46x_i2c_controller, - &ixp46x_ptp, -}; - -unsigned long ixp4xx_exp_bus_size; -EXPORT_SYMBOL(ixp4xx_exp_bus_size); - -static struct platform_device_info ixp_dev_info __initdata = { - .name = "ixp4xx_crypto", - .id = 0, - .dma_mask = DMA_BIT_MASK(32), -}; - -static int __init ixp_crypto_register(void) -{ - struct platform_device *pdev; - - if (!(~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH | - IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) { - printk(KERN_ERR "ixp_crypto: No HW crypto available\n"); - return -ENODEV; - } - - pdev = platform_device_register_full(&ixp_dev_info); - if (IS_ERR(pdev)) - return PTR_ERR(pdev); - - return 0; -} - -void __init ixp4xx_sys_init(void) -{ - ixp4xx_exp_bus_size = SZ_16M; - - platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); - - if (IS_ENABLED(CONFIG_CRYPTO_DEV_IXP4XX)) - ixp_crypto_register(); - - if (cpu_is_ixp46x()) { - int region; - - platform_add_devices(ixp46x_devices, - ARRAY_SIZE(ixp46x_devices)); - - for (region = 0; region < 7; region++) { - if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) { - ixp4xx_exp_bus_size = SZ_32M; - break; - } - } - } - - printk("IXP4xx: Using %luMiB expansion bus window size\n", - ixp4xx_exp_bus_size >> 20); -} - -unsigned long ixp4xx_timer_freq = IXP4XX_TIMER_FREQ; -EXPORT_SYMBOL(ixp4xx_timer_freq); - -void ixp4xx_restart(enum reboot_mode mode, const char *cmd) -{ - if (mode == REBOOT_SOFT) { - /* Jump into ROM at address 0 */ - soft_restart(0); - } else { - /* Use on-chip reset capability */ - - /* set the "key" register to enable access to - * "timer" and "enable" registers - */ - *IXP4XX_OSWK = IXP4XX_WDT_KEY; - - /* write 0 to the timer register for an immediate reset */ - *IXP4XX_OSWT = 0; - - *IXP4XX_OSWE = IXP4XX_WDT_RESET_ENABLE | IXP4XX_WDT_COUNT_ENABLE; - } -} - -#ifdef CONFIG_PCI -static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - return (dma_addr + size) > SZ_64M; -} - -static int ixp4xx_platform_notify_remove(struct device *dev) -{ - if (dev_is_pci(dev)) - dmabounce_unregister_dev(dev); - - return 0; -} -#endif - -/* - * Setup DMA mask to 64MB on PCI devices and 4 GB on all other things. - */ -static int ixp4xx_platform_notify(struct device *dev) -{ - dev->dma_mask = &dev->coherent_dma_mask; - -#ifdef CONFIG_PCI - if (dev_is_pci(dev)) { - dev->coherent_dma_mask = DMA_BIT_MASK(28); /* 64 MB */ - dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); - return 0; - } -#endif - - dev->coherent_dma_mask = DMA_BIT_MASK(32); - return 0; -} - -int dma_set_coherent_mask(struct device *dev, u64 mask) -{ - if (dev_is_pci(dev)) - mask &= DMA_BIT_MASK(28); /* 64 MB */ - - if ((mask & DMA_BIT_MASK(28)) == DMA_BIT_MASK(28)) { - dev->coherent_dma_mask = mask; - return 0; - } - - return -EIO; /* device wanted sub-64MB mask */ -} -EXPORT_SYMBOL(dma_set_coherent_mask); - -#ifdef CONFIG_IXP4XX_INDIRECT_PCI -/* - * In the case of using indirect PCI, we simply return the actual PCI - * address and our read/write implementation use that to drive the - * access registers. If something outside of PCI is ioremap'd, we - * fallback to the default. - */ - -static void __iomem *ixp4xx_ioremap_caller(phys_addr_t addr, size_t size, - unsigned int mtype, void *caller) -{ - if (!is_pci_memory(addr)) - return __arm_ioremap_caller(addr, size, mtype, caller); - - return (void __iomem *)addr; -} - -static void ixp4xx_iounmap(volatile void __iomem *addr) -{ - if (!is_pci_memory((__force u32)addr)) - __iounmap(addr); -} -#endif - -void __init ixp4xx_init_early(void) -{ - platform_notify = ixp4xx_platform_notify; -#ifdef CONFIG_PCI - platform_notify_remove = ixp4xx_platform_notify_remove; -#endif -#ifdef CONFIG_IXP4XX_INDIRECT_PCI - arch_ioremap_caller = ixp4xx_ioremap_caller; - arch_iounmap = ixp4xx_iounmap; -#endif -} diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c deleted file mode 100644 index 3c3ee9dad6d8..000000000000 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ /dev/null @@ -1,61 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * arch/arch/mach-ixp4xx/gateway7001-pci.c - * - * PCI setup routines for Gateway 7001 - * - * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> - * - * based on coyote-pci.c: - * Copyright (C) 2002 Jungo Software Technologies. - * Copyright (C) 2003 MontaVista Softwrae, Inc. - * - * Maintainer: Imre Kaloz <kaloz@openwrt.org> - */ - -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/irq.h> - -#include <asm/mach-types.h> -#include <mach/hardware.h> - -#include <asm/mach/pci.h> - -#include "irqs.h" - -void __init gateway7001_pci_preinit(void) -{ - irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); - - ixp4xx_pci_preinit(); -} - -static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - if (slot == 1) - return IRQ_IXP4XX_GPIO11; - else if (slot == 2) - return IRQ_IXP4XX_GPIO10; - else return -1; -} - -struct hw_pci gateway7001_pci __initdata = { - .nr_controllers = 1, - .ops = &ixp4xx_ops, - .preinit = gateway7001_pci_preinit, - .setup = ixp4xx_setup, - .map_irq = gateway7001_map_irq, -}; - -int __init gateway7001_pci_init(void) -{ - if (machine_is_gateway7001()) - pci_common_init(&gateway7001_pci); - return 0; -} - -subsys_initcall(gateway7001_pci_init); diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c deleted file mode 100644 index 678e7dfff0e5..000000000000 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ /dev/null @@ -1,113 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * arch/arm/mach-ixp4xx/gateway7001-setup.c - * - * Board setup for the Gateway 7001 board - * - * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org> - * - * based on coyote-setup.c: - * Copyright (C) 2003-2005 MontaVista Software, Inc. - * - * Author: Imre Kaloz <Kaloz@openwrt.org> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/device.h> -#include <linux/serial.h> -#include <linux/tty.h> -#include <linux/serial_8250.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> - -#include "irqs.h" - -static struct flash_platform_data gateway7001_flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource gateway7001_flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device gateway7001_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { - .platform_data = &gateway7001_flash_data, - }, - .num_resources = 1, - .resource = &gateway7001_flash_resource, -}; - -static struct resource gateway7001_uart_resource = { - .start = IXP4XX_UART2_BASE_PHYS, - .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, -}; - -static struct plat_serial8250_port gateway7001_uart_data[] = { - { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - { }, -}; - -static struct platform_device gateway7001_uart = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = gateway7001_uart_data, - }, - .num_resources = 1, - .resource = &gateway7001_uart_resource, -}; - -static struct platform_device *gateway7001_devices[] __initdata = { - &gateway7001_flash, - &gateway7001_uart -}; - -static void __init gateway7001_init(void) -{ - ixp4xx_sys_init(); - - gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); - gateway7001_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1; - - *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; - *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0; - - platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices)); -} - -#ifdef CONFIG_MACH_GATEWAY7001 -MACHINE_START(GATEWAY7001, "Gateway 7001 AP") - /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */ - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .init_time = ixp4xx_timer_init, - .atag_offset = 0x100, - .init_machine = gateway7001_init, -#if defined(CONFIG_PCI) - .dma_zone_size = SZ_64M, -#endif - .restart = ixp4xx_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c deleted file mode 100644 index 07b50dfcc489..000000000000 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ /dev/null @@ -1,532 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Goramo MultiLink router platform code - * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl> - */ - -#include <linux/delay.h> -#include <linux/gpio.h> -#include <linux/hdlc.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/platform_data/wan_ixp4xx_hss.h> -#include <linux/serial_8250.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <asm/mach/flash.h> -#include <asm/mach/pci.h> -#include <asm/system_info.h> - -#include "irqs.h" - -#define SLOT_ETHA 0x0B /* IDSEL = AD21 */ -#define SLOT_ETHB 0x0C /* IDSEL = AD20 */ -#define SLOT_MPCI 0x0D /* IDSEL = AD19 */ -#define SLOT_NEC 0x0E /* IDSEL = AD18 */ - -/* GPIO lines */ -#define GPIO_SCL 0 -#define GPIO_SDA 1 -#define GPIO_STR 2 -#define GPIO_IRQ_NEC 3 -#define GPIO_IRQ_ETHA 4 -#define GPIO_IRQ_ETHB 5 -#define GPIO_HSS0_DCD_N 6 -#define GPIO_HSS1_DCD_N 7 -#define GPIO_UART0_DCD 8 -#define GPIO_UART1_DCD 9 -#define GPIO_HSS0_CTS_N 10 -#define GPIO_HSS1_CTS_N 11 -#define GPIO_IRQ_MPCI 12 -#define GPIO_HSS1_RTS_N 13 -#define GPIO_HSS0_RTS_N 14 -/* GPIO15 is not connected */ - -/* Control outputs from 74HC4094 */ -#define CONTROL_HSS0_CLK_INT 0 -#define CONTROL_HSS1_CLK_INT 1 -#define CONTROL_HSS0_DTR_N 2 -#define CONTROL_HSS1_DTR_N 3 -#define CONTROL_EXT 4 -#define CONTROL_AUTO_RESET 5 -#define CONTROL_PCI_RESET_N 6 -#define CONTROL_EEPROM_WC_N 7 - -/* offsets from start of flash ROM = 0x50000000 */ -#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */ -#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */ -#define CFG_REV 0x4C /* u32 */ -#define CFG_SDRAM_SIZE 0x50 /* u32 */ -#define CFG_SDRAM_CONF 0x54 /* u32 */ -#define CFG_SDRAM_MODE 0x58 /* u32 */ -#define CFG_SDRAM_REFRESH 0x5C /* u32 */ - -#define CFG_HW_BITS 0x60 /* u32 */ -#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */ -#define CFG_HW_HAS_PCI_SLOT 0x00000008 -#define CFG_HW_HAS_ETH0 0x00000010 -#define CFG_HW_HAS_ETH1 0x00000020 -#define CFG_HW_HAS_HSS0 0x00000040 -#define CFG_HW_HAS_HSS1 0x00000080 -#define CFG_HW_HAS_UART0 0x00000100 -#define CFG_HW_HAS_UART1 0x00000200 -#define CFG_HW_HAS_EEPROM 0x00000400 - -#define FLASH_CMD_READ_ARRAY 0xFF -#define FLASH_CMD_READ_ID 0x90 -#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */ - -static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */; -static u8 control_value; - -/* - * FIXME: this is reimplementing I2C bit-bangining. Move this - * over to using driver/i2c/busses/i2c-gpio.c like all other boards - * and register proper I2C device(s) on the bus for this. (See - * other IXP4xx boards for examples.) - */ -static void set_scl(u8 value) -{ - gpio_set_value(GPIO_SCL, !!value); - udelay(3); -} - -static void set_sda(u8 value) -{ - gpio_set_value(GPIO_SDA, !!value); - udelay(3); -} - -static void set_str(u8 value) -{ - gpio_set_value(GPIO_STR, !!value); - udelay(3); -} - -static inline void set_control(int line, int value) -{ - if (value) - control_value |= (1 << line); - else - control_value &= ~(1 << line); -} - - -static void output_control(void) -{ - int i; - - gpio_direction_output(GPIO_SCL, 1); - gpio_direction_output(GPIO_SDA, 1); - - for (i = 0; i < 8; i++) { - set_scl(0); - set_sda(control_value & (0x80 >> i)); /* MSB first */ - set_scl(1); /* active edge */ - } - - set_str(1); - set_str(0); - - set_scl(0); - set_sda(1); /* Be ready for START */ - set_scl(1); -} - - -static void (*set_carrier_cb_tab[2])(void *pdev, int carrier); - -static int hss_set_clock(int port, unsigned int clock_type) -{ - int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT; - - switch (clock_type) { - case CLOCK_DEFAULT: - case CLOCK_EXT: - set_control(ctrl_int, 0); - output_control(); - return CLOCK_EXT; - - case CLOCK_INT: - set_control(ctrl_int, 1); - output_control(); - return CLOCK_INT; - - default: - return -EINVAL; - } -} - -static irqreturn_t hss_dcd_irq(int irq, void *pdev) -{ - int port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N)); - int i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); - set_carrier_cb_tab[port](pdev, !i); - return IRQ_HANDLED; -} - - -static int hss_open(int port, void *pdev, - void (*set_carrier_cb)(void *pdev, int carrier)) -{ - int i, irq; - - if (!port) - irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N); - else - irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N); - - i = gpio_get_value(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N); - set_carrier_cb(pdev, !i); - - set_carrier_cb_tab[!!port] = set_carrier_cb; - - if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) { - printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n", - irq, i); - return i; - } - - set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0); - output_control(); - gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0); - return 0; -} - -static void hss_close(int port, void *pdev) -{ - free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) : - IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev); - set_carrier_cb_tab[!!port] = NULL; /* catch bugs */ - - set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1); - output_control(); - gpio_set_value(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1); -} - - -/* Flash memory */ -static struct flash_platform_data flash_data = { - .map_name = "cfi_probe", - .width = 2, -}; - -static struct resource flash_resource = { - .flags = IORESOURCE_MEM, -}; - -static struct platform_device device_flash = { - .name = "IXP4XX-Flash", - .id = 0, - .dev = { .platform_data = &flash_data }, - .num_resources = 1, - .resource = &flash_resource, -}; - -/* IXP425 2 UART ports */ -static struct resource uart_resources[] = { - { - .start = IXP4XX_UART1_BASE_PHYS, - .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, - { - .start = IXP4XX_UART2_BASE_PHYS, - .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - } -}; - -static struct plat_serial8250_port uart_data[] = { - { - .mapbase = IXP4XX_UART1_BASE_PHYS, - .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT + - REG_OFFSET, - .irq = IRQ_IXP4XX_UART1, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - { - .mapbase = IXP4XX_UART2_BASE_PHYS, - .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT + - REG_OFFSET, - .irq = IRQ_IXP4XX_UART2, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, - .iotype = UPIO_MEM, - .regshift = 2, - .uartclk = IXP4XX_UART_XTAL, - }, - { }, -}; - -static struct platform_device device_uarts = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev.platform_data = uart_data, - .num_resources = 2, - .resource = uart_resources, -}; - - -/* Built-in 10/100 Ethernet MAC interfaces */ -static struct resource eth_npeb_resources[] = { - { - .start = IXP4XX_EthB_BASE_PHYS, - .end = IXP4XX_EthB_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct resource eth_npec_resources[] = { - { - .start = IXP4XX_EthC_BASE_PHYS, - .end = IXP4XX_EthC_BASE_PHYS + 0x0fff, - .flags = IORESOURCE_MEM, - }, -}; - -static struct eth_plat_info eth_plat[] = { - { - .phy = 0, - .rxq = 3, - .txreadyq = 32, - }, { - .phy = 1, - .rxq = 4, - .txreadyq = 33, - } -}; - -static struct platform_device device_eth_tab[] = { - { - .name = "ixp4xx_eth", - .id = IXP4XX_ETH_NPEB, - .dev.platform_data = eth_plat, - .num_resources = ARRAY_SIZE(eth_npeb_resources), - .resource = eth_npeb_resources, - }, { - .name = "ixp4xx_eth", - .id = IXP4XX_ETH_NPEC, - .dev.platform_data = eth_plat + 1, - .num_resources = ARRAY_SIZE(eth_npec_resources), - .resource = eth_npec_resources, - } -}; - - -/* IXP425 2 synchronous serial ports */ -static struct hss_plat_info hss_plat[] = { - { - .set_clock = hss_set_clock, - .open = hss_open, - .close = hss_close, - .txreadyq = 34, - }, { - .set_clock = hss_set_clock, - .open = hss_open, - .close = hss_close, - .txreadyq = 35, - } -}; - -static struct platform_device device_hss_tab[] = { - { - .name = "ixp4xx_hss", - .id = 0, - .dev.platform_data = hss_plat, - }, { - .name = "ixp4xx_hss", - .id = 1, - .dev.platform_data = hss_plat + 1, - } -}; - - -static struct platform_device *device_tab[7] __initdata = { - &device_flash, /* index 0 */ -}; - -static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr) -{ -#ifdef __ARMEB__ - return __raw_readb(flash + addr); -#else - return __raw_readb(flash + (addr ^ 3)); -#endif -} - -static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr) -{ -#ifdef __ARMEB__ - return __raw_readw(flash + addr); -#else - return __raw_readw(flash + (addr ^ 2)); -#endif -} - -static void __init gmlr_init(void) -{ - u8 __iomem *flash; - int i, devices = 1; /* flash */ - - ixp4xx_sys_init(); - - if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL) - printk(KERN_ERR "goramo-mlr: unable to access system" - " configuration data\n"); - else { - system_rev = __raw_readl(flash + CFG_REV); - hw_bits = __raw_readl(flash + CFG_HW_BITS); - - for (i = 0; i < ETH_ALEN; i++) { - eth_plat[0].hwaddr[i] = - flash_readb(flash, CFG_ETH0_ADDRESS + i); - eth_plat[1].hwaddr[i] = - flash_readb(flash, CFG_ETH1_ADDRESS + i); - } - - __raw_writew(FLASH_CMD_READ_ID, flash); - system_serial_high = flash_readw(flash, FLASH_SER_OFF); - system_serial_high <<= 16; - system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2); - system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4); - system_serial_low <<= 16; - system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6); - __raw_writew(FLASH_CMD_READ_ARRAY, flash); - - iounmap(flash); - } - - switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) { - case CFG_HW_HAS_UART0: - memset(&uart_data[1], 0, sizeof(uart_data[1])); - device_uarts.num_resources = 1; - break; - - case CFG_HW_HAS_UART1: - device_uarts.dev.platform_data = &uart_data[1]; - device_uarts.resource = &uart_resources[1]; - device_uarts.num_resources = 1; - break; - } - if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) - device_tab[devices++] = &device_uarts; /* max index 1 */ - - if (hw_bits & CFG_HW_HAS_ETH0) - device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */ - if (hw_bits & CFG_HW_HAS_ETH1) - device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */ - - if (hw_bits & CFG_HW_HAS_HSS0) - device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */ - if (hw_bits & CFG_HW_HAS_HSS1) - device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */ - - hss_plat[0].timer_freq = ixp4xx_timer_freq; - hss_plat[1].timer_freq = ixp4xx_timer_freq; - - gpio_request(GPIO_SCL, "SCL/clock"); - gpio_request(GPIO_SDA, "SDA/data"); - gpio_request(GPIO_STR, "strobe"); - gpio_request(GPIO_HSS0_RTS_N, "HSS0 RTS"); - gpio_request(GPIO_HSS1_RTS_N, "HSS1 RTS"); - gpio_request(GPIO_HSS0_DCD_N, "HSS0 DCD"); - gpio_request(GPIO_HSS1_DCD_N, "HSS1 DCD"); - - gpio_direction_output(GPIO_SCL, 1); - gpio_direction_output(GPIO_SDA, 1); - gpio_direction_output(GPIO_STR, 0); - gpio_direction_output(GPIO_HSS0_RTS_N, 1); - gpio_direction_output(GPIO_HSS1_RTS_N, 1); - gpio_direction_input(GPIO_HSS0_DCD_N); - gpio_direction_input(GPIO_HSS1_DCD_N); - irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH); - irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH); - - set_control(CONTROL_HSS0_DTR_N, 1); - set_control(CONTROL_HSS1_DTR_N, 1); - set_control(CONTROL_EEPROM_WC_N, 1); - set_control(CONTROL_PCI_RESET_N, 1); - output_control(); - - msleep(1); /* Wait for PCI devices to initialize */ - - flash_resource.start = IXP4XX_EXP_BUS_BASE(0); - flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; - - platform_add_devices(device_tab, devices); -} - - -#ifdef CONFIG_PCI -static void __init gmlr_pci_preinit(void) -{ - irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW); - irq_set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW); - ixp4xx_pci_preinit(); -} - -static void __init gmlr_pci_postinit(void) -{ - if ((hw_bits & CFG_HW_USB_PORTS) >= 2 && - (hw_bits & CFG_HW_USB_PORTS) < 5) { - /* need to adjust number of USB ports on NEC chip */ - u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0; - if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) { - value &= ~7; - value |= (hw_bits & CFG_HW_USB_PORTS); - ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value); - } - } -} - -static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - switch(slot) { - case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA); - case SLOT_ETHB: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB); - case SLOT_NEC: return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC); - default: return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI); - } -} - -static struct hw_pci gmlr_hw_pci __initdata = { - .nr_controllers = 1, - .ops = &ixp4xx_ops, - .preinit = gmlr_pci_preinit, - .postinit = gmlr_pci_postinit, - .setup = ixp4xx_setup, - .map_irq = gmlr_map_irq, -}; - -static int __init gmlr_pci_init(void) -{ - if (machine_is_goramo_mlr() && - (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT))) - pci_common_init(&gmlr_hw_pci); - return 0; -} - -subsys_initcall(gmlr_pci_init); -#endif /* CONFIG_PCI */ - - -MACHINE_START(GORAMO_MLR, "MultiLink") - /* Maintainer: Krzysztof Halasa */ - .map_io = ixp4xx_map_io, - .init_early = ixp4xx_init_early, - .init_irq = ixp4xx_init_irq, - .init_time = ixp4xx_timer_init, - .atag_offset = 0x100, - .init_machine = gmlr_init, -#if defined(CONFIG_PCI) - .dma_zone_size = SZ_64M, -#endif - .restart = ixp4xx_restart, -MACHINE_END diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h deleted file mode 100644 index b2b7301ce503..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/hardware.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ixp4xx/include/mach/hardware.h - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - */ - -/* - * Hardware definitions for IXP4xx based systems - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#define __ASM_ARCH_HARDWARE_H__ - -#ifdef CONFIG_IXP4XX_INDIRECT_PCI -#define PCIBIOS_MAX_MEM 0x4FFFFFFF -#else -#define PCIBIOS_MAX_MEM 0x4BFFFFFF -#endif - -/* Register locations and bits */ -#include "ixp4xx-regs.h" - -#ifndef __ASSEMBLER__ -#include <linux/soc/ixp4xx/cpu.h> -#endif - -/* Platform helper functions and definitions */ -#include "platform.h" - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h deleted file mode 100644 index 014cf6dcaf8b..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ /dev/null @@ -1,545 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ixp4xx/include/mach/io.h - * - * Author: Deepak Saxena <dsaxena@plexity.net> - * - * Copyright (C) 2002-2005 MontaVista Software, Inc. - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include <linux/bitops.h> - -#include <mach/hardware.h> - -extern int (*ixp4xx_pci_read)(u32 addr, u32 cmd, u32* data); -extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data); - - -/* - * IXP4xx provides two methods of accessing PCI memory space: - * - * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB). - * To access PCI via this space, we simply ioremap() the BAR - * into the kernel and we can use the standard read[bwl]/write[bwl] - * macros. This is the preffered method due to speed but it - * limits the system to just 64MB of PCI memory. This can be - * problematic if using video cards and other memory-heavy targets. - * - * 2) If > 64MB of memory space is required, the IXP4xx can use indirect - * registers to access the whole 4 GB of PCI memory space (as we do below - * for I/O transactions). This allows currently for up to 1 GB (0x10000000 - * to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that - * every PCI access requires three local register accesses plus a spinlock, - * but in some cases the performance hit is acceptable. In addition, you - * cannot mmap() PCI devices in this case. - */ -#ifdef CONFIG_IXP4XX_INDIRECT_PCI - -/* - * In the case of using indirect PCI, we simply return the actual PCI - * address and our read/write implementation use that to drive the - * access registers. If something outside of PCI is ioremap'd, we - * fallback to the default. - */ - -extern unsigned long pcibios_min_mem; -static inline int is_pci_memory(u32 addr) -{ - return (addr >= pcibios_min_mem) && (addr <= 0x4FFFFFFF); -} - -#define writeb(v, p) __indirect_writeb(v, p) -#define writew(v, p) __indirect_writew(v, p) -#define writel(v, p) __indirect_writel(v, p) - -#define writeb_relaxed(v, p) __indirect_writeb(v, p) -#define writew_relaxed(v, p) __indirect_writew(v, p) -#define writel_relaxed(v, p) __indirect_writel(v, p) - -#define writesb(p, v, l) __indirect_writesb(p, v, l) -#define writesw(p, v, l) __indirect_writesw(p, v, l) -#define writesl(p, v, l) __indirect_writesl(p, v, l) - -#define readb(p) __indirect_readb(p) -#define readw(p) __indirect_readw(p) -#define readl(p) __indirect_readl(p) - -#define readb_relaxed(p) __indirect_readb(p) -#define readw_relaxed(p) __indirect_readw(p) -#define readl_relaxed(p) __indirect_readl(p) - -#define readsb(p, v, l) __indirect_readsb(p, v, l) -#define readsw(p, v, l) __indirect_readsw(p, v, l) -#define readsl(p, v, l) __indirect_readsl(p, v, l) - -static inline void __indirect_writeb(u8 value, volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (!is_pci_memory(addr)) { - __raw_writeb(value, p); - return; - } - - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); -} - -static inline void __indirect_writesb(volatile void __iomem *bus_addr, - const void *p, int count) -{ - const u8 *vaddr = p; - - while (count--) - writeb(*vaddr++, bus_addr); -} - -static inline void __indirect_writew(u16 value, volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (!is_pci_memory(addr)) { - __raw_writew(value, p); - return; - } - - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data); -} - -static inline void __indirect_writesw(volatile void __iomem *bus_addr, - const void *p, int count) -{ - const u16 *vaddr = p; - - while (count--) - writew(*vaddr++, bus_addr); -} - -static inline void __indirect_writel(u32 value, volatile void __iomem *p) -{ - u32 addr = (__force u32)p; - - if (!is_pci_memory(addr)) { - __raw_writel(value, p); - return; - } - - ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value); -} - -static inline void __indirect_writesl(volatile void __iomem *bus_addr, - const void *p, int count) -{ - const u32 *vaddr = p; - while (count--) - writel(*vaddr++, bus_addr); -} - -static inline u8 __indirect_readb(const volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (!is_pci_memory(addr)) - return __raw_readb(p); - - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) - return 0xff; - - return data >> (8*n); -} - -static inline void __indirect_readsb(const volatile void __iomem *bus_addr, - void *p, u32 count) -{ - u8 *vaddr = p; - - while (count--) - *vaddr++ = readb(bus_addr); -} - -static inline u16 __indirect_readw(const volatile void __iomem *p) -{ - u32 addr = (u32)p; - u32 n, byte_enables, data; - - if (!is_pci_memory(addr)) - return __raw_readw(p); - - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_MEMREAD, &data)) - return 0xffff; - - return data>>(8*n); -} - -static inline void __indirect_readsw(const volatile void __iomem *bus_addr, - void *p, u32 count) -{ - u16 *vaddr = p; - - while (count--) - *vaddr++ = readw(bus_addr); -} - -static inline u32 __indirect_readl(const volatile void __iomem *p) -{ - u32 addr = (__force u32)p; - u32 data; - - if (!is_pci_memory(addr)) - return __raw_readl(p); - - if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data)) - return 0xffffffff; - - return data; -} - -static inline void __indirect_readsl(const volatile void __iomem *bus_addr, - void *p, u32 count) -{ - u32 *vaddr = p; - - while (count--) - *vaddr++ = readl(bus_addr); -} - - -/* - * We can use the built-in functions b/c they end up calling writeb/readb - */ -#define memset_io(c,v,l) _memset_io((c),(v),(l)) -#define memcpy_fromio(a,c,l) _memcpy_fromio((a),(c),(l)) -#define memcpy_toio(c,a,l) _memcpy_toio((c),(a),(l)) - -#endif /* CONFIG_IXP4XX_INDIRECT_PCI */ - -#ifndef CONFIG_PCI - -#define __io(v) __typesafe_io(v) - -#else - -/* - * IXP4xx does not have a transparent cpu -> PCI I/O translation - * window. Instead, it has a set of registers that must be tweaked - * with the proper byte lanes, command types, and address for the - * transaction. This means that we need to override the default - * I/O functions. - */ - -#define outb outb -static inline void outb(u8 value, u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); -} - -#define outsb outsb -static inline void outsb(u32 io_addr, const void *p, u32 count) -{ - const u8 *vaddr = p; - - while (count--) - outb(*vaddr++, io_addr); -} - -#define outw outw -static inline void outw(u16 value, u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - data = value << (8*n); - ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data); -} - -#define outsw outsw -static inline void outsw(u32 io_addr, const void *p, u32 count) -{ - const u16 *vaddr = p; - while (count--) - outw(cpu_to_le16(*vaddr++), io_addr); -} - -#define outl outl -static inline void outl(u32 value, u32 addr) -{ - ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value); -} - -#define outsl outsl -static inline void outsl(u32 io_addr, const void *p, u32 count) -{ - const u32 *vaddr = p; - while (count--) - outl(cpu_to_le32(*vaddr++), io_addr); -} - -#define inb inb -static inline u8 inb(u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) - return 0xff; - - return data >> (8*n); -} - -#define insb insb -static inline void insb(u32 io_addr, void *p, u32 count) -{ - u8 *vaddr = p; - while (count--) - *vaddr++ = inb(io_addr); -} - -#define inw inw -static inline u16 inw(u32 addr) -{ - u32 n, byte_enables, data; - n = addr % 4; - byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL; - if (ixp4xx_pci_read(addr, byte_enables | NP_CMD_IOREAD, &data)) - return 0xffff; - - return data>>(8*n); -} - -#define insw insw -static inline void insw(u32 io_addr, void *p, u32 count) -{ - u16 *vaddr = p; - while (count--) - *vaddr++ = le16_to_cpu(inw(io_addr)); -} - -#define inl inl -static inline u32 inl(u32 addr) -{ - u32 data; - if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data)) - return 0xffffffff; - - return data; -} - -#define insl insl -static inline void insl(u32 io_addr, void *p, u32 count) -{ - u32 *vaddr = p; - while (count--) - *vaddr++ = le32_to_cpu(inl(io_addr)); -} - -#define PIO_OFFSET 0x10000UL -#define PIO_MASK 0x0ffffUL - -#define __is_io_address(p) (((unsigned long)p >= PIO_OFFSET) && \ - ((unsigned long)p <= (PIO_MASK + PIO_OFFSET))) - -#define ioread8(p) ioread8(p) -static inline u8 ioread8(const void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - return (unsigned int)inb(port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - return (unsigned int)__raw_readb(addr); -#else - return (unsigned int)__indirect_readb(addr); -#endif -} - -#define ioread8_rep(p, v, c) ioread8_rep(p, v, c) -static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - insb(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsb(addr, vaddr, count); -#else - __indirect_readsb(addr, vaddr, count); -#endif -} - -#define ioread16(p) ioread16(p) -static inline u16 ioread16(const void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - return (unsigned int)inw(port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le16_to_cpu((__force __le16)__raw_readw(addr)); -#else - return (unsigned int)__indirect_readw(addr); -#endif -} - -#define ioread16_rep(p, v, c) ioread16_rep(p, v, c) -static inline void ioread16_rep(const void __iomem *addr, void *vaddr, - u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - insw(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsw(addr, vaddr, count); -#else - __indirect_readsw(addr, vaddr, count); -#endif -} - -#define ioread32(p) ioread32(p) -static inline u32 ioread32(const void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - return (unsigned int)inl(port & PIO_MASK); - else { -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - return le32_to_cpu((__force __le32)__raw_readl(addr)); -#else - return (unsigned int)__indirect_readl(addr); -#endif - } -} - -#define ioread32_rep(p, v, c) ioread32_rep(p, v, c) -static inline void ioread32_rep(const void __iomem *addr, void *vaddr, - u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - insl(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_readsl(addr, vaddr, count); -#else - __indirect_readsl(addr, vaddr, count); -#endif -} - -#define iowrite8(v, p) iowrite8(v, p) -static inline void iowrite8(u8 value, void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - outb(value, port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writeb(value, addr); -#else - __indirect_writeb(value, addr); -#endif -} - -#define iowrite8_rep(p, v, c) iowrite8_rep(p, v, c) -static inline void iowrite8_rep(void __iomem *addr, const void *vaddr, - u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - outsb(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesb(addr, vaddr, count); -#else - __indirect_writesb(addr, vaddr, count); -#endif -} - -#define iowrite16(v, p) iowrite16(v, p) -static inline void iowrite16(u16 value, void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - outw(value, port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writew(cpu_to_le16(value), addr); -#else - __indirect_writew(value, addr); -#endif -} - -#define iowrite16_rep(p, v, c) iowrite16_rep(p, v, c) -static inline void iowrite16_rep(void __iomem *addr, const void *vaddr, - u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - outsw(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesw(addr, vaddr, count); -#else - __indirect_writesw(addr, vaddr, count); -#endif -} - -#define iowrite32(v, p) iowrite32(v, p) -static inline void iowrite32(u32 value, void __iomem *addr) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - outl(value, port & PIO_MASK); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writel((u32 __force)cpu_to_le32(value), addr); -#else - __indirect_writel(value, addr); -#endif -} - -#define iowrite32_rep(p, v, c) iowrite32_rep(p, v, c) -static inline void iowrite32_rep(void __iomem *addr, const void *vaddr, - u32 count) -{ - unsigned long port = (unsigned long __force)addr; - if (__is_io_address(port)) - outsl(port & PIO_MASK, vaddr, count); - else -#ifndef CONFIG_IXP4XX_INDIRECT_PCI - __raw_writesl(addr, vaddr, count); -#else - __indirect_writesl(addr, vaddr, count); -#endif -} - -#define ioport_map(port, nr) ioport_map(port, nr) -static inline void __iomem *ioport_map(unsigned long port, unsigned int nr) -{ - return ((void __iomem*)((port) + PIO_OFFSET)); -} -#define ioport_unmap(addr) ioport_unmap(addr) -static inline void ioport_unmap(void __iomem *addr) -{ -} -#endif /* CONFIG_PCI */ - -#endif /* __ASM_ARM_ARCH_IO_H */ diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h deleted file mode 100644 index 74e63d4531aa..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ /dev/null @@ -1,303 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h - * - * Register definitions for IXP4xx chipset. This file contains - * register location and bit definitions only. Platform specific - * definitions and helper function declarations are in platform.h - * and machine-name.h. - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - */ - -#ifndef _ASM_ARM_IXP4XX_H_ -#define _ASM_ARM_IXP4XX_H_ - -/* - * IXP4xx Linux Memory Map: - * - * Phy Size Virt Description - * ========================================================================= - * - * 0x00000000 0x10000000(max) PAGE_OFFSET System RAM - * - * 0x48000000 0x04000000 ioremap'd PCI Memory Space - * - * 0x50000000 0x10000000 ioremap'd EXP BUS - * - * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals - * - * 0xC0000000 0x00001000 0xFEF13000 PCI CFG - * - * 0xC4000000 0x00001000 0xFEF14000 EXP CFG - * - * 0x60000000 0x00004000 0xFEF15000 QMgr - */ - -/* - * Queue Manager - */ -#define IXP4XX_QMGR_BASE_PHYS 0x60000000 - -/* - * Peripheral space, including debug UART. Must be section-aligned so that - * it can be used with the low-level debug code. - */ -#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000 -#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEC00000) -#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000 - -/* - * PCI Config registers - */ -#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000 -#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEC13000) -#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000 - -/* - * Expansion BUS Configuration registers - */ -#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000 -#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEC14000 -#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000 - -#define IXP4XX_EXP_CS0_OFFSET 0x00 -#define IXP4XX_EXP_CS1_OFFSET 0x04 -#define IXP4XX_EXP_CS2_OFFSET 0x08 -#define IXP4XX_EXP_CS3_OFFSET 0x0C -#define IXP4XX_EXP_CS4_OFFSET 0x10 -#define IXP4XX_EXP_CS5_OFFSET 0x14 -#define IXP4XX_EXP_CS6_OFFSET 0x18 -#define IXP4XX_EXP_CS7_OFFSET 0x1C -#define IXP4XX_EXP_CFG0_OFFSET 0x20 -#define IXP4XX_EXP_CFG1_OFFSET 0x24 -#define IXP4XX_EXP_CFG2_OFFSET 0x28 -#define IXP4XX_EXP_CFG3_OFFSET 0x2C - -/* - * Expansion Bus Controller registers. - */ -#define IXP4XX_EXP_REG(x) ((volatile u32 __iomem *)(IXP4XX_EXP_CFG_BASE_VIRT+(x))) - -#define IXP4XX_EXP_CS0 IXP4XX_EXP_REG(IXP4XX_EXP_CS0_OFFSET) -#define IXP4XX_EXP_CS1 IXP4XX_EXP_REG(IXP4XX_EXP_CS1_OFFSET) -#define IXP4XX_EXP_CS2 IXP4XX_EXP_REG(IXP4XX_EXP_CS2_OFFSET) -#define IXP4XX_EXP_CS3 IXP4XX_EXP_REG(IXP4XX_EXP_CS3_OFFSET) -#define IXP4XX_EXP_CS4 IXP4XX_EXP_REG(IXP4XX_EXP_CS4_OFFSET) -#define IXP4XX_EXP_CS5 IXP4XX_EXP_REG(IXP4XX_EXP_CS5_OFFSET) -#define IXP4XX_EXP_CS6 IXP4XX_EXP_REG(IXP4XX_EXP_CS6_OFFSET) -#define IXP4XX_EXP_CS7 IXP4XX_EXP_REG(IXP4XX_EXP_CS7_OFFSET) - -#define IXP4XX_EXP_CFG0 IXP4XX_EXP_REG(IXP4XX_EXP_CFG0_OFFSET) -#define IXP4XX_EXP_CFG1 IXP4XX_EXP_REG(IXP4XX_EXP_CFG1_OFFSET) -#define IXP4XX_EXP_CFG2 IXP4XX_EXP_REG(IXP4XX_EXP_CFG2_OFFSET) -#define IXP4XX_EXP_CFG3 IXP4XX_EXP_REG(IXP4XX_EXP_CFG3_OFFSET) - - -/* - * Peripheral Space Register Region Base Addresses - */ -#define IXP4XX_UART1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x0000) -#define IXP4XX_UART2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x1000) -#define IXP4XX_PMU_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x2000) -#define IXP4XX_INTC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x3000) -#define IXP4XX_GPIO_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x4000) -#define IXP4XX_TIMER_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x5000) -#define IXP4XX_NPEA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x6000) -#define IXP4XX_NPEB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x7000) -#define IXP4XX_NPEC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x8000) -#define IXP4XX_EthB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x9000) -#define IXP4XX_EthC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xA000) -#define IXP4XX_USB_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xB000) -/* ixp46X only */ -#define IXP4XX_EthA_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xC000) -#define IXP4XX_EthB1_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xD000) -#define IXP4XX_EthB2_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xE000) -#define IXP4XX_EthB3_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0xF000) -#define IXP4XX_TIMESYNC_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x10000) -#define IXP4XX_I2C_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x11000) -#define IXP4XX_SSP_BASE_PHYS (IXP4XX_PERIPHERAL_BASE_PHYS + 0x12000) - - -/* The UART is explicitly put in the beginning of fixmap */ -#define IXP4XX_UART1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x0000) -#define IXP4XX_UART2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x1000) -#define IXP4XX_PMU_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x2000) -#define IXP4XX_INTC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x3000) -#define IXP4XX_GPIO_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x4000) -#define IXP4XX_TIMER_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x5000) -#define IXP4XX_EthB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x9000) -#define IXP4XX_EthC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xA000) -#define IXP4XX_USB_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xB000) -/* ixp46X only */ -#define IXP4XX_EthA_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xC000) -#define IXP4XX_EthB1_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xD000) -#define IXP4XX_EthB2_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xE000) -#define IXP4XX_EthB3_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0xF000) -#define IXP4XX_TIMESYNC_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x10000) -#define IXP4XX_I2C_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x11000) -#define IXP4XX_SSP_BASE_VIRT (IXP4XX_PERIPHERAL_BASE_VIRT + 0x12000) - -/* - * Constants to make it easy to access Timer Control/Status registers - */ -#define IXP4XX_OSTS_OFFSET 0x00 /* Continious TimeStamp */ -#define IXP4XX_OST1_OFFSET 0x04 /* Timer 1 Timestamp */ -#define IXP4XX_OSRT1_OFFSET 0x08 /* Timer 1 Reload */ -#define IXP4XX_OST2_OFFSET 0x0C /* Timer 2 Timestamp */ -#define IXP4XX_OSRT2_OFFSET 0x10 /* Timer 2 Reload */ -#define IXP4XX_OSWT_OFFSET 0x14 /* Watchdog Timer */ -#define IXP4XX_OSWE_OFFSET 0x18 /* Watchdog Enable */ -#define IXP4XX_OSWK_OFFSET 0x1C /* Watchdog Key */ -#define IXP4XX_OSST_OFFSET 0x20 /* Timer Status */ - -/* - * Operating System Timer Register Definitions. - */ - -#define IXP4XX_TIMER_REG(x) ((volatile u32 *)(IXP4XX_TIMER_BASE_VIRT+(x))) - -#define IXP4XX_OSTS IXP4XX_TIMER_REG(IXP4XX_OSTS_OFFSET) -#define IXP4XX_OST1 IXP4XX_TIMER_REG(IXP4XX_OST1_OFFSET) -#define IXP4XX_OSRT1 IXP4XX_TIMER_REG(IXP4XX_OSRT1_OFFSET) -#define IXP4XX_OST2 IXP4XX_TIMER_REG(IXP4XX_OST2_OFFSET) -#define IXP4XX_OSRT2 IXP4XX_TIMER_REG(IXP4XX_OSRT2_OFFSET) -#define IXP4XX_OSWT IXP4XX_TIMER_REG(IXP4XX_OSWT_OFFSET) -#define IXP4XX_OSWE IXP4XX_TIMER_REG(IXP4XX_OSWE_OFFSET) -#define IXP4XX_OSWK IXP4XX_TIMER_REG(IXP4XX_OSWK_OFFSET) -#define IXP4XX_OSST IXP4XX_TIMER_REG(IXP4XX_OSST_OFFSET) - -/* - * Timer register values and bit definitions - */ -#define IXP4XX_OST_ENABLE 0x00000001 -#define IXP4XX_OST_ONE_SHOT 0x00000002 -/* Low order bits of reload value ignored */ -#define IXP4XX_OST_RELOAD_MASK 0x00000003 -#define IXP4XX_OST_DISABLED 0x00000000 -#define IXP4XX_OSST_TIMER_1_PEND 0x00000001 -#define IXP4XX_OSST_TIMER_2_PEND 0x00000002 -#define IXP4XX_OSST_TIMER_TS_PEND 0x00000004 -#define IXP4XX_OSST_TIMER_WDOG_PEND 0x00000008 -#define IXP4XX_OSST_TIMER_WARM_RESET 0x00000010 - -#define IXP4XX_WDT_KEY 0x0000482E - -#define IXP4XX_WDT_RESET_ENABLE 0x00000001 -#define IXP4XX_WDT_IRQ_ENABLE 0x00000002 -#define IXP4XX_WDT_COUNT_ENABLE 0x00000004 - - -/* - * Constants to make it easy to access PCI Control/Status registers - */ -#define PCI_NP_AD_OFFSET 0x00 -#define PCI_NP_CBE_OFFSET 0x04 -#define PCI_NP_WDATA_OFFSET 0x08 -#define PCI_NP_RDATA_OFFSET 0x0c -#define PCI_CRP_AD_CBE_OFFSET 0x10 -#define PCI_CRP_WDATA_OFFSET 0x14 -#define PCI_CRP_RDATA_OFFSET 0x18 -#define PCI_CSR_OFFSET 0x1c -#define PCI_ISR_OFFSET 0x20 -#define PCI_INTEN_OFFSET 0x24 -#define PCI_DMACTRL_OFFSET 0x28 -#define PCI_AHBMEMBASE_OFFSET 0x2c -#define PCI_AHBIOBASE_OFFSET 0x30 -#define PCI_PCIMEMBASE_OFFSET 0x34 -#define PCI_AHBDOORBELL_OFFSET 0x38 -#define PCI_PCIDOORBELL_OFFSET 0x3C -#define PCI_ATPDMA0_AHBADDR_OFFSET 0x40 -#define PCI_ATPDMA0_PCIADDR_OFFSET 0x44 -#define PCI_ATPDMA0_LENADDR_OFFSET 0x48 -#define PCI_ATPDMA1_AHBADDR_OFFSET 0x4C -#define PCI_ATPDMA1_PCIADDR_OFFSET 0x50 -#define PCI_ATPDMA1_LENADDR_OFFSET 0x54 - -/* - * PCI Control/Status Registers - */ -#define _IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x))) - -#define PCI_NP_AD _IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET) -#define PCI_NP_CBE _IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET) -#define PCI_NP_WDATA _IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET) -#define PCI_NP_RDATA _IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET) -#define PCI_CRP_AD_CBE _IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET) -#define PCI_CRP_WDATA _IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET) -#define PCI_CRP_RDATA _IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET) -#define PCI_CSR _IXP4XX_PCI_CSR(PCI_CSR_OFFSET) -#define PCI_ISR _IXP4XX_PCI_CSR(PCI_ISR_OFFSET) -#define PCI_INTEN _IXP4XX_PCI_CSR(PCI_INTEN_OFFSET) -#define PCI_DMACTRL _IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET) -#define PCI_AHBMEMBASE _IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET) -#define PCI_AHBIOBASE _IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET) -#define PCI_PCIMEMBASE _IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET) -#define PCI_AHBDOORBELL _IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET) -#define PCI_PCIDOORBELL _IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET) -#define PCI_ATPDMA0_AHBADDR _IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET) -#define PCI_ATPDMA0_PCIADDR _IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET) -#define PCI_ATPDMA0_LENADDR _IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET) -#define PCI_ATPDMA1_AHBADDR _IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET) -#define PCI_ATPDMA1_PCIADDR _IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET) -#define PCI_ATPDMA1_LENADDR _IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET) - -/* - * PCI register values and bit definitions - */ - -/* CSR bit definitions */ -#define PCI_CSR_HOST 0x00000001 -#define PCI_CSR_ARBEN 0x00000002 -#define PCI_CSR_ADS 0x00000004 -#define PCI_CSR_PDS 0x00000008 -#define PCI_CSR_ABE 0x00000010 -#define PCI_CSR_DBT 0x00000020 -#define PCI_CSR_ASE 0x00000100 -#define PCI_CSR_IC 0x00008000 - -/* ISR (Interrupt status) Register bit definitions */ -#define PCI_ISR_PSE 0x00000001 -#define PCI_ISR_PFE 0x00000002 -#define PCI_ISR_PPE 0x00000004 -#define PCI_ISR_AHBE 0x00000008 -#define PCI_ISR_APDC 0x00000010 -#define PCI_ISR_PADC 0x00000020 -#define PCI_ISR_ADB 0x00000040 -#define PCI_ISR_PDB 0x00000080 - -/* INTEN (Interrupt Enable) Register bit definitions */ -#define PCI_INTEN_PSE 0x00000001 -#define PCI_INTEN_PFE 0x00000002 -#define PCI_INTEN_PPE 0x00000004 -#define PCI_INTEN_AHBE 0x00000008 -#define PCI_INTEN_APDC 0x00000010 -#define PCI_INTEN_PADC 0x00000020 -#define PCI_INTEN_ADB 0x00000040 -#define PCI_INTEN_PDB 0x00000080 - -/* - * Shift value for byte enable on NP cmd/byte enable register - */ -#define IXP4XX_PCI_NP_CBE_BESL 4 - -/* - * PCI commands supported by NP access unit - */ -#define NP_CMD_IOREAD 0x2 -#define NP_CMD_IOWRITE 0x3 -#define NP_CMD_CONFIGREAD 0xa -#define NP_CMD_CONFIGWRITE 0xb -#define NP_CMD_MEMREAD 0x6 -#define NP_CMD_MEMWRITE 0x7 - -/* - * Constants for CRP access into local config space - */ -#define CRP_AD_CBE_BESL 20 -#define CRP_AD_CBE_WRITE 0x00010000 - -#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */ - -#endif diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h deleted file mode 100644 index d8b4df96db08..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/platform.h +++ /dev/null @@ -1,102 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * arch/arm/mach-ixp4xx/include/mach/platform.h - * - * Constants and functions that are useful to IXP4xx platform-specific code - * and device drivers. - * - * Copyright (C) 2004 MontaVista Software, Inc. - */ - -#ifndef __ASM_ARCH_HARDWARE_H__ -#error "Do not include this directly, instead #include <mach/hardware.h>" -#endif - -#ifndef __ASSEMBLY__ - -#include <linux/reboot.h> -#include <linux/platform_data/eth_ixp4xx.h> - -#include <asm/types.h> - -#ifndef __ARMEB__ -#define REG_OFFSET 0 -#else -#define REG_OFFSET 3 -#endif - -/* - * Expansion bus memory regions - */ -#define IXP4XX_EXP_BUS_BASE_PHYS (0x50000000) - -/* - * The expansion bus on the IXP4xx can be configured for either 16 or - * 32MB windows and the CS offset for each region changes based on the - * current configuration. This means that we cannot simply hardcode - * each offset. ixp4xx_sys_init() looks at the expansion bus configuration - * as setup by the bootloader to determine our window size. - */ -extern unsigned long ixp4xx_exp_bus_size; - -#define IXP4XX_EXP_BUS_BASE(region)\ - (IXP4XX_EXP_BUS_BASE_PHYS + ((region) * ixp4xx_exp_bus_size)) - -#define IXP4XX_EXP_BUS_END(region)\ - (IXP4XX_EXP_BUS_BASE(region) + ixp4xx_exp_bus_size - 1) - -/* Those macros can be used to adjust timing and configure - * other features for each region. - */ - -#define IXP4XX_EXP_BUS_RECOVERY_T(x) (((x) & 0x0f) << 16) -#define IXP4XX_EXP_BUS_HOLD_T(x) (((x) & 0x03) << 20) -#define IXP4XX_EXP_BUS_STROBE_T(x) (((x) & 0x0f) << 22) -#define IXP4XX_EXP_BUS_SETUP_T(x) (((x) & 0x03) << 26) -#define IXP4XX_EXP_BUS_ADDR_T(x) (((x) & 0x03) << 28) -#define IXP4XX_EXP_BUS_SIZE(x) (((x) & 0x0f) << 10) -#define IXP4XX_EXP_BUS_CYCLES(x) (((x) & 0x03) << 14) - -#define IXP4XX_EXP_BUS_CS_EN (1L << 31) -#define IXP4XX_EXP_BUS_BYTE_RD16 (1L << 6) -#define IXP4XX_EXP_BUS_HRDY_POL (1L << 5) -#define IXP4XX_EXP_BUS_MUX_EN (1L << 4) -#define IXP4XX_EXP_BUS_SPLT_EN (1L << 3) -#define IXP4XX_EXP_BUS_WR_EN (1L << 1) -#define IXP4XX_EXP_BUS_BYTE_EN (1L << 0) - -#define IXP4XX_EXP_BUS_CYCLES_INTEL 0x00 -#define IXP4XX_EXP_BUS_CYCLES_MOTOROLA 0x01 -#define IXP4XX_EXP_BUS_CYCLES_HPI 0x02 - -#define IXP4XX_FLASH_WRITABLE (0x2) -#define IXP4XX_FLASH_DEFAULT (0xbcd23c40) -#define IXP4XX_FLASH_WRITE (0xbcd23c42) - -/* - * Clock Speed Definitions. - */ -#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66MHzi APB BUS */ -#define IXP4XX_UART_XTAL 14745600 - -/* - * Frequency of clock used for primary clocksource - */ -extern unsigned long ixp4xx_timer_freq; - -/* - * Functions used by platform-level setup code - */ -extern void ixp4xx_map_io(void); -extern void ixp4xx_init_early(void); -extern void ixp4xx_init_irq(void); -extern void ixp4xx_sys_init(void); -extern void ixp4xx_timer_init(void); -extern void ixp4xx_restart(enum reboot_mode, const char *); -extern void ixp4xx_pci_preinit(void); -struct pci_sys_data; -extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); -extern struct pci_ops ixp4xx_ops; - -#endif // __ASSEMBLY__ - diff --git a/arch/arm/mach-ixp4xx/include/mach/udc.h b/arch/arm/mach-ixp4xx/include/mach/udc.h deleted file mode 100644 index 7bd8b96c8843..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/udc.h +++ /dev/null @@ -1,8 +0,0 @@ -/* - * arch/arm/mach-ixp4xx/include/mach/udc.h - * - */ -#include <linux/platform_data/pxa2xx_udc.h> - -extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info); - diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h deleted file mode 100644 index 9e08b270cfc7..000000000000 --- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h +++ /dev/null @@ -1,52 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ixp4xx/include/mach/uncompress.h - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003-2004 MontaVista Software, Inc. - */ - -#ifndef _ARCH_UNCOMPRESS_H_ -#define _ARCH_UNCOMPRESS_H_ - -#include "ixp4xx-regs.h" -#include <asm/mach-types.h> -#include <linux/serial_reg.h> - -#define TX_DONE (UART_LSR_TEMT|UART_LSR_THRE) - -volatile u32* uart_base; - -static inline void putc(int c) -{ - /* Check THRE and TEMT bits before we transmit the character. - */ - while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE) - barrier(); - - *uart_base = c; -} - -static void flush(void) -{ -} - -static __inline__ void __arch_decomp_setup(unsigned long arch_id) -{ - /* - * Some boards are using UART2 as console - */ - if (machine_is_adi_coyote() || machine_is_gtwx5715() || - machine_is_gateway7001() || machine_is_wg302v2() || - machine_is_devixp() || machine_is_miccpt() || machine_is_mic256()) - uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; - else - uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; -} - -/* - * arch_id is a variable in decompress_kernel() - */ -#define arch_decomp_setup() __arch_decomp_setup(arch_id) - -#endif diff --git a/arch/arm/mach-ixp4xx/irqs.h b/arch/arm/mach-ixp4xx/irqs.h deleted file mode 100644 index a3e8d6408c56..000000000000 --- a/arch/arm/mach-ixp4xx/irqs.h +++ /dev/null @@ -1,64 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-ixp4xx/include/mach/irqs.h - * - * IRQ definitions for IXP4XX based systems - * - * Copyright (C) 2002 Intel Corporation. - * Copyright (C) 2003 MontaVista Software, Inc. - */ - -#ifndef _ARCH_IXP4XX_IRQS_H_ -#define _ARCH_IXP4XX_IRQS_H_ - -#define IRQ_IXP4XX_BASE 16 - -#define IRQ_IXP4XX_NPEA (IRQ_IXP4XX_BASE + 0) -#define IRQ_IXP4XX_NPEB (IRQ_IXP4XX_BASE + 1) -#define IRQ_IXP4XX_NPEC (IRQ_IXP4XX_BASE + 2) -#define IRQ_IXP4XX_QM1 (IRQ_IXP4XX_BASE + 3) -#define IRQ_IXP4XX_QM2 (IRQ_IXP4XX_BASE + 4) -#define IRQ_IXP4XX_TIMER1 (IRQ_IXP4XX_BASE + 5) -#define IRQ_IXP4XX_GPIO0 (IRQ_IXP4XX_BASE + 6) -#define IRQ_IXP4XX_GPIO1 (IRQ_IXP4XX_BASE + 7) -#define IRQ_IXP4XX_PCI_INT (IRQ_IXP4XX_BASE + 8) -#define IRQ_IXP4XX_PCI_DMA1 (IRQ_IXP4XX_BASE + 9) -#define IRQ_IXP4XX_PCI_DMA2 (IRQ_IXP4XX_BASE + 10) -#define IRQ_IXP4XX_TIMER2 (IRQ_IXP4XX_BASE + 11) -#define IRQ_IXP4XX_USB (IRQ_IXP4XX_BASE + 12) -#define IRQ_IXP4XX_UART2 (IRQ_IXP4XX_BASE + 13) -#define IRQ_IXP4XX_TIMESTAMP (IRQ_IXP4XX_BASE + 14) -#define IRQ_IXP4XX_UART1 (IRQ_IXP4XX_BASE + 15) -#define IRQ_IXP4XX_WDOG (IRQ_IXP4XX_BASE + 16) -#define IRQ_IXP4XX_AHB_PMU (IRQ_IXP4XX_BASE + 17) -#define IRQ_IXP4XX_XSCALE_PMU (IRQ_IXP4XX_BASE + 18) -#define IRQ_IXP4XX_GPIO2 (IRQ_IXP4XX_BASE + 19) -#define IRQ_IXP4XX_GPIO3 (IRQ_IXP4XX_BASE + 20) -#define IRQ_IXP4XX_GPIO4 (IRQ_IXP4XX_BASE + 21) -#define IRQ_IXP4XX_GPIO5 (IRQ_IXP4XX_BASE + 22) -#define IRQ_IXP4XX_GPIO6 (IRQ_IXP4XX_BASE + 23) -#define IRQ_IXP4XX_GPIO7 (IRQ_IXP4XX_BASE + 24) -#define IRQ_IXP4XX_GPIO8 (IRQ_IXP4XX_BASE + 25) -#define IRQ_IXP4XX_GPIO9 (IRQ_IXP4XX_BASE + 26) -#define IRQ_IXP4XX_GPIO10 (IRQ_IXP4XX_BASE + 27) -#define IRQ_IXP4XX_GPIO11 (IRQ_IXP4XX_BASE + 28) -#define IRQ_IXP4XX_GPIO12 (IRQ_IXP4XX_BASE + 29) -#define IRQ_IXP4XX_SW_INT1 (IRQ_IXP4XX_BASE + 30) -#define IRQ_IXP4XX_SW_INT2 (IRQ_IXP4XX_BASE + 31) -#define IRQ_IXP4XX_USB_HOST (IRQ_IXP4XX_BASE + 32) -#define IRQ_IXP4XX_I2C (IRQ_IXP4XX_BASE + 33) -#define IRQ_IXP4XX_SSP (IRQ_IXP4XX_BASE + 34) -#define IRQ_IXP4XX_TSYNC (IRQ_IXP4XX_BASE + 35) -#define IRQ_IXP4XX_EAU_DONE (IRQ_IXP4XX_BASE + 36) -#define IRQ_IXP4XX_SHA_DONE (IRQ_IXP4XX_BASE + 37) -#define IRQ_IXP4XX_SWCP_PE (IRQ_IXP4XX_BASE + 58) -#define IRQ_IXP4XX_QM_PE (IRQ_IXP4XX_BASE + 60) -#define IRQ_IXP4XX_MCU_ECC (IRQ_IXP4XX_BASE + 61) -#define IRQ_IXP4XX_EXP_PE (IRQ_IXP4XX_BASE + 62) - -#define _IXP4XX_GPIO_IRQ(n) (IRQ_IXP4XX_GPIO ## n) -#define IXP4XX_GPIO_IRQ(n) _IXP4XX_GPIO_IRQ(n) - -#define XSCALE_PMU_IRQ (IRQ_IXP4XX_XSCALE_PMU) - -#endif diff --git a/arch/arm/mach-ixp4xx/ixp4xx-of.c b/arch/arm/mach-ixp4xx/ixp4xx-of.c index f9904716ec7f..f543e2adae0c 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx-of.c +++ b/arch/arm/mach-ixp4xx/ixp4xx-of.c @@ -46,7 +46,7 @@ static void __init ixp4xx_of_map_io(void) } /* - * We handle 4 differen SoC families. These compatible strings are enough + * We handle 4 different SoC families. These compatible strings are enough * to provide the core so that different boards can add their more detailed * specifics. */ |