1 files changed, 135 insertions, 0 deletions
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
new file mode 100644
index 000000000000..83d8975592f8
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -0,0 +1,135 @@
+/*
+ * Copyright 2012 (C), Michael Walle <michael@walle.cc>
+ *
+ * arch/arm/mach-kirkwood/board-lsxl.c
+ *
+ * Buffalo Linkstation LS-XHL and LS-CHLv2 init for drivers not
+ * converted to flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/gpio-fan.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data lsxl_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data lsxl_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static unsigned int lsxl_mpp_config[] __initdata = {
+	MPP10_GPO,	/* HDD Power Enable */
+	MPP11_GPIO,	/* USB Vbus Enable */
+	MPP18_GPO,	/* FAN High Enable# */
+	MPP19_GPO,	/* FAN Low Enable# */
+	MPP36_GPIO,	/* Function Blue LED */
+	MPP37_GPIO,	/* Alarm LED */
+	MPP38_GPIO,	/* Info LED */
+	MPP39_GPIO,	/* Power LED */
+	MPP40_GPIO,	/* Fan Lock */
+	MPP41_GPIO,	/* Function Button */
+	MPP42_GPIO,	/* Power Switch */
+	MPP43_GPIO,	/* Power Auto Switch */
+	MPP48_GPIO,	/* Function Red LED */
+	0
+};
+
+#define LSXL_GPIO_FAN_HIGH	18
+#define LSXL_GPIO_FAN_LOW	19
+#define LSXL_GPIO_FAN_LOCK	40
+
+static struct gpio_fan_alarm lsxl_alarm = {
+	.gpio = LSXL_GPIO_FAN_LOCK,
+};
+
+static struct gpio_fan_speed lsxl_speeds[] = {
+	{
+		.rpm = 0,
+		.ctrl_val = 3,
+	}, {
+		.rpm = 1500,
+		.ctrl_val = 1,
+	}, {
+		.rpm = 3250,
+		.ctrl_val = 2,
+	}, {
+		.rpm = 5000,
+		.ctrl_val = 0,
+	}
+};
+
+static int lsxl_gpio_list[] = {
+	LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW,
+};
+
+static struct gpio_fan_platform_data lsxl_fan_data = {
+	.num_ctrl = ARRAY_SIZE(lsxl_gpio_list),
+	.ctrl = lsxl_gpio_list,
+	.alarm = &lsxl_alarm,
+	.num_speed = ARRAY_SIZE(lsxl_speeds),
+	.speed = lsxl_speeds,
+};
+
+static struct platform_device lsxl_fan_device = {
+	.name = "gpio-fan",
+	.id = -1,
+	.num_resources = 0,
+	.dev = {
+		.platform_data = &lsxl_fan_data,
+	},
+};
+
+/*
+ * On the LS-XHL/LS-CHLv2, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ *
+ */
+static void lsxl_power_off(void)
+{
+	kirkwood_restart('h', NULL);
+}
+
+#define LSXL_GPIO_HDD_POWER 10
+#define LSXL_GPIO_USB_POWER 11
+
+void __init lsxl_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_mpp_conf(lsxl_mpp_config);
+
+	/* usb and sata power on */
+	gpio_set_value(LSXL_GPIO_USB_POWER, 1);
+	gpio_set_value(LSXL_GPIO_HDD_POWER, 1);
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&lsxl_ge00_data);
+	kirkwood_ge01_init(&lsxl_ge01_data);
+	platform_device_register(&lsxl_fan_device);
+
+	/* register power-off method */
+	pm_power_off = lsxl_power_off;
+}