diff options
Diffstat (limited to 'arch/arm/mach-mx3/mach-mx35_3ds.c')
| -rw-r--r-- | arch/arm/mach-mx3/mach-mx35_3ds.c | 69 |
1 files changed, 64 insertions, 5 deletions
diff --git a/arch/arm/mach-mx3/mach-mx35_3ds.c b/arch/arm/mach-mx3/mach-mx35_3ds.c index 1c30d7212f17..b66a75aa2e88 100644 --- a/arch/arm/mach-mx3/mach-mx35_3ds.c +++ b/arch/arm/mach-mx3/mach-mx35_3ds.c @@ -1,5 +1,6 @@ /* * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright (C) 2009 Marc Kleine-Budde, Pengutronix * * Author: Fabio Estevam <fabio.estevam@freescale.com> * @@ -27,6 +28,8 @@ #include <linux/gpio.h> #include <linux/fsl_devices.h> +#include <linux/mtd/physmap.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> @@ -35,16 +38,47 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-mx35.h> +#include <mach/irqs.h> +#include <mach/3ds_debugboard.h> +#include <mach/mxc_ehci.h> #include "devices-imx35.h" #include "devices.h" +#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1) + static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static struct physmap_flash_data mx35pdk_flash_data = { + .width = 2, +}; + +static struct resource mx35pdk_flash_resource = { + .start = MX35_CS0_BASE_ADDR, + .end = MX35_CS0_BASE_ADDR + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mx35pdk_flash = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &mx35pdk_flash_data, + }, + .resource = &mx35pdk_flash_resource, + .num_resources = 1, +}; + +static const struct mxc_nand_platform_data mx35pdk_nand_board_info __initconst = { + .width = 1, + .hw_ecc = 1, + .flash_bbt = 1, +}; + static struct platform_device *devices[] __initdata = { - &mxc_fec_device, + &mx35pdk_flash, }; static struct pad_desc mx35pdk_pads[] = { @@ -75,14 +109,31 @@ static struct pad_desc mx35pdk_pads[] = { /* USBOTG */ MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR, MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC, + /* USBH1 */ + MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR, + MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC, + /* SDCARD */ + MX35_PAD_SD1_CMD__ESDHC1_CMD, + MX35_PAD_SD1_CLK__ESDHC1_CLK, + MX35_PAD_SD1_DATA0__ESDHC1_DAT0, + MX35_PAD_SD1_DATA1__ESDHC1_DAT1, + MX35_PAD_SD1_DATA2__ESDHC1_DAT2, + MX35_PAD_SD1_DATA3__ESDHC1_DAT3, }; /* OTG config */ -static struct fsl_usb2_platform_data usb_pdata = { +static struct fsl_usb2_platform_data usb_otg_pdata = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_UTMI_WIDE, }; +/* USB HOST config */ +static struct mxc_usbh_platform_data usb_host_pdata = { + .portsc = MXC_EHCI_MODE_SERIAL, + .flags = MXC_EHCI_INTERFACE_SINGLE_UNI | + MXC_EHCI_INTERNAL_PHY, +}; + /* * Board specific initialization. */ @@ -90,11 +141,21 @@ static void __init mxc_board_init(void) { mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); + imx35_add_fec(NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); imx35_add_imx_uart0(&uart_pdata); - mxc_register_device(&mxc_otg_udc_device, &usb_pdata); + mxc_register_device(&mxc_otg_udc_device, &usb_otg_pdata); + + mxc_register_device(&mxc_usbh1, &usb_host_pdata); + + imx35_add_mxc_nand(&mx35pdk_nand_board_info); + imx35_add_esdhc(0, NULL); + + if (mxc_expio_init(MX35_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + pr_warn("Init of the debugboard failed, all " + "devices on the debugboard are unusable.\n"); } static void __init mx35pdk_timer_init(void) @@ -108,8 +169,6 @@ struct sys_timer mx35pdk_timer = { MACHINE_START(MX35_3DS, "Freescale MX35PDK") /* Maintainer: Freescale Semiconductor, Inc */ - .phys_io = MX35_AIPS1_BASE_ADDR, - .io_pg_offst = ((MX35_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, .init_irq = mx35_init_irq, |