diff options
Diffstat (limited to 'arch/arm/mach-omap/sleep.S')
| -rw-r--r-- | arch/arm/mach-omap/sleep.S | 314 |
1 files changed, 0 insertions, 314 deletions
diff --git a/arch/arm/mach-omap/sleep.S b/arch/arm/mach-omap/sleep.S deleted file mode 100644 index 4d426d105828..000000000000 --- a/arch/arm/mach-omap/sleep.S +++ /dev/null @@ -1,314 +0,0 @@ -/* - * linux/arch/arm/mach-omap/sleep.S - * - * Low-level OMAP1510/1610 sleep/wakeUp support - * - * Initial SA1110 code: - * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> - * - * Adapted for PXA by Nicolas Pitre: - * Copyright (c) 2002 Monta Vista Software, Inc. - * - * Support for OMAP1510/1610 by Dirk Behme <dirk.behme@de.bosch.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/config.h> -#include <linux/linkage.h> -#include <asm/assembler.h> -#include <asm/arch/io.h> -#include <asm/arch/pm.h> - - .text - -/* - * Forces OMAP into idle state - * - * omapXXXX_idle_loop_suspend() - * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. - * - * Note: Because of slightly different configuration values we have - * processor specific functions here. - */ - -#ifdef CONFIG_ARCH_OMAP1510 -ENTRY(omap1510_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP1510_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1510: subs r5, r5, #1 - bne l_1510 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap1510_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap1510_idle_loop_suspend_sz) - .word . - omap1510_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP1510 */ - -#if defined(CONFIG_ARCH_OMAP16XX) -ENTRY(omap1610_idle_loop_suspend) - - stmfd sp!, {r0 - r12, lr} @ save registers on stack - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - @ get ARM_IDLECT2 into r2 - ldrh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - mov r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - @ get ARM_IDLECT1 into r1 - ldrh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - orr r3, r1, #OMAP1610_IDLE_LOOP_REQUEST & 0xffff - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1610: subs r5, r5, #1 - bne l_1610 -/* - * Let's wait for the next clock tick to wake us up. - */ - mov r0, #0 - mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt -/* - * omap1610_idle_loop_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - - @ restore ARM_IDLECT1 and ARM_IDLECT2 and return - @ r1 has ARM_IDLECT1 and r2 still has ARM_IDLECT2 - strh r2, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r1, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - ldmfd sp!, {r0 - r12, pc} @ restore regs and return - -ENTRY(omap1610_idle_loop_suspend_sz) - .word . - omap1610_idle_loop_suspend -#endif /* CONFIG_ARCH_OMAP16XX */ - -/* - * Forces OMAP into deep sleep state - * - * omapXXXX_cpu_suspend() - * - * The values of the registers ARM_IDLECT1 and ARM_IDLECT2 are passed - * as arg0 and arg1 from caller. arg0 is stored in register r0 and arg1 - * in register r1. - * - * Note: This code get's copied to internal SRAM at boot. When the OMAP - * wakes up it continues execution at the point it went to sleep. - * - * Note: Because of errata work arounds we have processor specific functions - * here. They are mostly the same, but slightly different. - * - */ - -#ifdef CONFIG_ARCH_OMAP1510 -ENTRY(omap1510_cpu_suspend) - - @ save registers on stack - stmfd sp!, {r0 - r12, lr} - - @ load base address of Traffic Controller - mov r4, #TCMIF_ASM_BASE & 0xff000000 - orr r4, r4, #TCMIF_ASM_BASE & 0x00ff0000 - orr r4, r4, #TCMIF_ASM_BASE & 0x0000ff00 - - @ work around errata of OMAP1510 PDE bit for TC shut down - @ clear PDE bit - ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - bic r5, r5, #PDE_BIT & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ set PWD_EN bit - and r5, r5, #PWD_EN_BIT & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ prepare to put SDRAM into self-refresh manually - ldr r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #SELF_REFRESH_MODE & 0xff000000 - orr r5, r5, #SELF_REFRESH_MODE & 0x000000ff - str r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - - @ prepare to put EMIFS to Sleep - ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #IDLE_EMIFS_REQUEST & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - mov r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1510_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - mov r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff - orr r3, r3, #OMAP1510_DEEP_SLEEP_REQUEST & 0xff00 - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1510_2: - subs r5, r5, #1 - bne l_1510_2 -/* - * Let's wait for the next wake up event to wake us up. r0 can't be - * used here because r0 holds ARM_IDLECT1 - */ - mov r2, #0 - mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt -/* - * omap1510_cpu_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - @ restore regs and return - ldmfd sp!, {r0 - r12, pc} - -ENTRY(omap1510_cpu_suspend_sz) - .word . - omap1510_cpu_suspend -#endif /* CONFIG_ARCH_OMAP1510 */ - -#if defined(CONFIG_ARCH_OMAP16XX) -ENTRY(omap1610_cpu_suspend) - - @ save registers on stack - stmfd sp!, {r0 - r12, lr} - - @ load base address of Traffic Controller - mov r4, #TCMIF_ASM_BASE & 0xff000000 - orr r4, r4, #TCMIF_ASM_BASE & 0x00ff0000 - orr r4, r4, #TCMIF_ASM_BASE & 0x0000ff00 - - @ prepare to put SDRAM into self-refresh manually - ldr r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #SELF_REFRESH_MODE & 0xff000000 - orr r5, r5, #SELF_REFRESH_MODE & 0x000000ff - str r5, [r4, #EMIFF_SDRAM_CONFIG_ASM_OFFSET & 0xff] - - @ prepare to put EMIFS to Sleep - ldr r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - orr r5, r5, #IDLE_EMIFS_REQUEST & 0xff - str r5, [r4, #EMIFS_CONFIG_ASM_OFFSET & 0xff] - - @ load base address of ARM_IDLECT1 and ARM_IDLECT2 - mov r4, #CLKGEN_REG_ASM_BASE & 0xff000000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x00ff0000 - orr r4, r4, #CLKGEN_REG_ASM_BASE & 0x0000ff00 - - @ turn off clock domains - mov r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff - orr r5,r5, #OMAP1610_IDLE_CLOCK_DOMAINS & 0xff00 - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ work around errata of OMAP1610/5912. Enable (!) peripheral - @ clock to let the chip go into deep sleep - ldrh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - orr r5,r5, #EN_PERCK_BIT & 0xff - strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - - @ request ARM idle - mov r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff - orr r3, r3, #OMAP1610_DEEP_SLEEP_REQUEST & 0xff00 - strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - mov r5, #IDLE_WAIT_CYCLES & 0xff - orr r5, r5, #IDLE_WAIT_CYCLES & 0xff00 -l_1610_2: - subs r5, r5, #1 - bne l_1610_2 -/* - * Let's wait for the next wake up event to wake us up. r0 can't be - * used here because r0 holds ARM_IDLECT1 - */ - mov r2, #0 - mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt -/* - * omap1610_cpu_suspend()'s resume point. - * - * It will just start executing here, so we'll restore stuff from the - * stack, reset the ARM_IDLECT1 and ARM_IDLECT2. - */ - strh r1, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] - strh r0, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] - - @ restore regs and return - ldmfd sp!, {r0 - r12, pc} - -ENTRY(omap1610_cpu_suspend_sz) - .word . - omap1610_cpu_suspend -#endif /* CONFIG_ARCH_OMAP16XX */ |