diff options
Diffstat (limited to 'arch/arm/mach-omap1')
23 files changed, 260 insertions, 150 deletions
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile index 9ce17f13d3f1..b6a537c875b8 100644 --- a/arch/arm/mach-omap1/Makefile +++ b/arch/arm/mach-omap1/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o +obj-y := io.o id.o sram.o irq.o mux.o flash.o serial.o devices.o obj-y += clock.o clock_data.o opp_data.o obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 7e70c3c08da6..096f2ed102cb 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -18,18 +18,19 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/flash.h> #include <asm/mach/map.h> #include <plat/tc.h> #include <mach/gpio.h> #include <plat/mux.h> +#include <plat/flash.h> #include <plat/fpga.h> #include <plat/keypad.h> #include <plat/common.h> @@ -150,9 +151,9 @@ static struct mtd_partition nor_partitions[] = { }, }; -static struct flash_platform_data nor_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data nor_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = nor_partitions, .nr_parts = ARRAY_SIZE(nor_partitions), }; @@ -164,7 +165,7 @@ static struct resource nor_resource = { }; static struct platform_device nor_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &nor_data, diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index fa7cecea19f9..d1100e4f65ac 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -26,6 +26,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/i2c/tps65010.h> #include <linux/smc91x.h> @@ -35,7 +36,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/flash.h> #include <asm/mach/map.h> #include <plat/mux.h> @@ -45,6 +45,7 @@ #include <plat/usb.h> #include <plat/keypad.h> #include <plat/common.h> +#include <plat/flash.h> #include "board-h2.h" @@ -121,9 +122,9 @@ static struct mtd_partition h2_nor_partitions[] = { } }; -static struct flash_platform_data h2_nor_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data h2_nor_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = h2_nor_partitions, .nr_parts = ARRAY_SIZE(h2_nor_partitions), }; @@ -134,7 +135,7 @@ static struct resource h2_nor_resource = { }; static struct platform_device h2_nor_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &h2_nor_data, diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 6a7f9c391cf1..a53ab8297d25 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -25,6 +25,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/spi/spi.h> #include <linux/i2c/tps65010.h> @@ -37,7 +38,6 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/flash.h> #include <asm/mach/map.h> #include <mach/irqs.h> @@ -47,6 +47,7 @@ #include <plat/keypad.h> #include <plat/dma.h> #include <plat/common.h> +#include <plat/flash.h> #include "board-h3.h" @@ -126,9 +127,9 @@ static struct mtd_partition nor_partitions[] = { } }; -static struct flash_platform_data nor_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data nor_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = nor_partitions, .nr_parts = ARRAY_SIZE(nor_partitions), }; @@ -139,7 +140,7 @@ static struct resource nor_resource = { }; static struct platform_device nor_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &nor_data, diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 2133b006f6a3..5d12fd35681b 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -22,16 +22,17 @@ #include <linux/delay.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/flash.h> #include <asm/mach/map.h> #include <plat/mux.h> +#include <plat/flash.h> #include <plat/fpga.h> #include <mach/gpio.h> #include <plat/tc.h> @@ -94,9 +95,9 @@ static struct mtd_partition innovator_partitions[] = { } }; -static struct flash_platform_data innovator_flash_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data innovator_flash_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = innovator_partitions, .nr_parts = ARRAY_SIZE(innovator_partitions), }; @@ -108,7 +109,7 @@ static struct resource innovator_flash_resource = { }; static struct platform_device innovator_flash_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &innovator_flash_data, diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index ccea4f448e9a..80d862001def 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -37,6 +37,7 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/i2c/tps65010.h> @@ -46,8 +47,8 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/flash.h> +#include <plat/flash.h> #include <plat/usb.h> #include <plat/mux.h> #include <plat/tc.h> @@ -94,9 +95,9 @@ static struct mtd_partition osk_partitions[] = { } }; -static struct flash_platform_data osk_flash_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data osk_flash_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = osk_partitions, .nr_parts = ARRAY_SIZE(osk_partitions), }; @@ -107,7 +108,7 @@ static struct resource osk_flash_resource = { }; static struct platform_device osk5912_flash_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &osk_flash_data, diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 9fe887262bdf..569b4c9085cd 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/interrupt.h> #include <linux/apm-emulation.h> @@ -31,9 +32,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/flash.h> #include <mach/gpio.h> +#include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/tc.h> @@ -126,9 +127,9 @@ static struct mtd_partition palmte_rom_partitions[] = { }, }; -static struct flash_platform_data palmte_rom_data = { - .map_name = "map_rom", +static struct physmap_flash_data palmte_rom_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = palmte_rom_partitions, .nr_parts = ARRAY_SIZE(palmte_rom_partitions), }; @@ -140,7 +141,7 @@ static struct resource palmte_rom_resource = { }; static struct platform_device palmte_rom_device = { - .name = "omapflash", + .name = "physmap-flash", .id = -1, .dev = { .platform_data = &palmte_rom_data, diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index af068e3e0fe7..6ad49a2cc1a0 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -21,16 +21,17 @@ #include <linux/interrupt.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/leds.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/flash.h> #include <plat/led.h> #include <mach/gpio.h> +#include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/dma.h> @@ -104,9 +105,9 @@ static struct mtd_partition palmtt_partitions[] = { } }; -static struct flash_platform_data palmtt_flash_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data palmtt_flash_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = palmtt_partitions, .nr_parts = ARRAY_SIZE(palmtt_partitions), }; @@ -118,7 +119,7 @@ static struct resource palmtt_flash_resource = { }; static struct platform_device palmtt_flash_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &palmtt_flash_data, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index c7a3b6f36500..6641de9257ef 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -25,14 +25,15 @@ #include <linux/interrupt.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <asm/mach/flash.h> #include <mach/gpio.h> +#include <plat/flash.h> #include <plat/mux.h> #include <plat/usb.h> #include <plat/dma.h> @@ -126,10 +127,9 @@ static struct mtd_partition palmz71_rom_partitions[] = { }, }; -static struct flash_platform_data palmz71_rom_data = { - .map_name = "map_rom", - .name = "onboardrom", +static struct physmap_flash_data palmz71_rom_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = palmz71_rom_partitions, .nr_parts = ARRAY_SIZE(palmz71_rom_partitions), }; @@ -141,7 +141,7 @@ static struct resource palmz71_rom_resource = { }; static struct platform_device palmz71_rom_device = { - .name = "omapflash", + .name = "physmap-flash", .id = -1, .dev = { .platform_data = &palmz71_rom_data, diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 1387a4f15da9..e854d5741c88 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -18,19 +18,20 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/input.h> #include <linux/smc91x.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/flash.h> #include <asm/mach/map.h> #include <plat/tc.h> #include <mach/gpio.h> #include <plat/mux.h> #include <plat/fpga.h> +#include <plat/flash.h> #include <plat/keypad.h> #include <plat/common.h> #include <plat/board.h> @@ -117,9 +118,9 @@ static struct mtd_partition nor_partitions[] = { }, }; -static struct flash_platform_data nor_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data nor_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = nor_partitions, .nr_parts = ARRAY_SIZE(nor_partitions), }; @@ -131,7 +132,7 @@ static struct resource nor_resource = { }; static struct platform_device nor_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &nor_data, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 7a97fac83d8d..2fb1e5f8e2ec 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -22,6 +22,7 @@ #include <linux/notifier.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/types.h> #include <linux/i2c.h> #include <linux/errno.h> @@ -29,10 +30,10 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/flash.h> #include <asm/mach/map.h> #include <mach/gpio.h> +#include <plat/flash.h> #include <plat/mux.h> #include <plat/dma.h> #include <plat/irda.h> @@ -287,9 +288,9 @@ static struct mtd_partition sx1_partitions[] = { } }; -static struct flash_platform_data sx1_flash_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data sx1_flash_data = { .width = 2, + .set_vpp = omap1_set_vpp, .parts = sx1_partitions, .nr_parts = ARRAY_SIZE(sx1_partitions), }; @@ -310,7 +311,7 @@ static struct resource sx1_old_flash_resource[] = { }; static struct platform_device sx1_flash_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &sx1_flash_data, @@ -327,7 +328,7 @@ static struct resource sx1_new_flash_resource = { }; static struct platform_device sx1_flash_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &sx1_flash_data, diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 169183537997..87b9436fe7c0 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -18,6 +18,7 @@ #include <linux/irq.h> #include <linux/init.h> #include <linux/kernel.h> +#include <linux/mtd/physmap.h> #include <linux/notifier.h> #include <linux/reboot.h> #include <linux/serial_8250.h> @@ -27,11 +28,11 @@ #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <asm/mach/flash.h> #include <asm/mach/map.h> #include <plat/common.h> #include <mach/gpio.h> +#include <plat/flash.h> #include <plat/mux.h> #include <plat/tc.h> #include <plat/usb.h> @@ -86,9 +87,9 @@ static int __init ext_uart_init(void) } arch_initcall(ext_uart_init); -static struct flash_platform_data voiceblue_flash_data = { - .map_name = "cfi_probe", +static struct physmap_flash_data voiceblue_flash_data = { .width = 2, + .set_vpp = omap1_set_vpp, }; static struct resource voiceblue_flash_resource = { @@ -98,7 +99,7 @@ static struct resource voiceblue_flash_resource = { }; static struct platform_device voiceblue_flash_device = { - .name = "omapflash", + .name = "physmap-flash", .id = 0, .dev = { .platform_data = &voiceblue_flash_data, diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 2ba9ab953731..e0aec1007a0d 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock.c * - * Copyright (C) 2004 - 2005, 2009 Nokia corporation + * Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * * Modified to use omap shared clock framework by @@ -38,26 +38,6 @@ struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p; * Omap1 specific clock functions *-------------------------------------------------------------------------*/ -static int clk_omap1_dummy_enable(struct clk *clk) -{ - return 0; -} - -static void clk_omap1_dummy_disable(struct clk *clk) -{ -} - -const struct clkops clkops_dummy = { - .enable = clk_omap1_dummy_enable, - .disable = clk_omap1_dummy_disable, -}; - -/* XXX can be replaced with a fixed_divisor_recalc */ -unsigned long omap1_watchdog_recalc(struct clk *clk) -{ - return clk->parent->rate / 14; -} - unsigned long omap1_uart_recalc(struct clk *clk) { unsigned int val = __raw_readl(clk->enable_reg); @@ -214,8 +194,8 @@ int omap1_select_table_rate(struct clk *clk, unsigned long rate) struct mpu_rate * ptr; unsigned long dpll1_rate, ref_rate; - dpll1_rate = clk_get_rate(ck_dpll1_p); - ref_rate = clk_get_rate(ck_ref_p); + dpll1_rate = ck_dpll1_p->rate; + ref_rate = ck_ref_p->rate; for (ptr = omap1_rate_table; ptr->rate; ptr++) { if (ptr->xtal != ref_rate) @@ -306,7 +286,7 @@ long omap1_round_to_table_rate(struct clk *clk, unsigned long rate) long highest_rate; unsigned long ref_rate; - ref_rate = clk_get_rate(ck_ref_p); + ref_rate = ck_ref_p->rate; highest_rate = -EINVAL; @@ -577,9 +557,6 @@ const struct clkops clkops_uart = { long omap1_clk_round_rate(struct clk *clk, unsigned long rate) { - if (clk->flags & RATE_FIXED) - return clk->rate; - if (clk->round_rate != NULL) return clk->round_rate(clk, rate); diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index ab995a9c606c..aa8558adbf1c 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/clock_data.c * - * Copyright (C) 2004 - 2005, 2009 Nokia corporation + * Copyright (C) 2004 - 2005, 2009-2010 Nokia Corporation * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com> * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc * @@ -27,13 +27,6 @@ * Omap1 clocks *-------------------------------------------------------------------------*/ -/* XXX is this necessary? */ -static struct clk dummy_ck = { - .name = "dummy", - .ops = &clkops_dummy, - .flags = RATE_FIXED, -}; - static struct clk ck_ref = { .name = "ck_ref", .ops = &clkops_null, @@ -149,7 +142,8 @@ static struct arm_idlect1_clk armwdt_ck = { .flags = CLOCK_IDLE_CONTROL, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT2), .enable_bit = EN_WDTCK, - .recalc = &omap1_watchdog_recalc, + .fixed_div = 14, + .recalc = &omap_fixed_divisor_recalc, }, .idlect_shift = 0, }; @@ -388,8 +382,7 @@ static struct uart_clk uart1_16xx = { /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 29, }, @@ -429,8 +422,7 @@ static struct uart_clk uart3_16xx = { /* Direct from ULPD, no real parent */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | - CLOCK_NO_IDLE_PARENT, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 31, }, @@ -442,7 +434,7 @@ static struct clk usb_clko = { /* 6 MHz output on W4_USB_CLKO */ .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 6000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT, + .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL), .enable_bit = USB_MCLK_EN_BIT, }; @@ -452,7 +444,7 @@ static struct clk usb_hhc_ck1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, /* Actually 2 clocks, 12MHz and 48MHz */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, + .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = USB_HOST_HHC_UHOST_EN, }; @@ -463,7 +455,7 @@ static struct clk usb_hhc_ck16xx = { /* Direct from ULPD, no parent */ .rate = 48000000, /* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */ - .flags = RATE_FIXED | ENABLE_REG_32BIT, + .flags = ENABLE_REG_32BIT, .enable_reg = OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */ .enable_bit = 8 /* UHOST_EN */, }; @@ -473,7 +465,6 @@ static struct clk usb_dc_ck = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, - .flags = RATE_FIXED, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 4, }; @@ -483,7 +474,6 @@ static struct clk usb_dc_ck7xx = { .ops = &clkops_generic, /* Direct from ULPD, no parent */ .rate = 48000000, - .flags = RATE_FIXED, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 8, }; @@ -493,7 +483,6 @@ static struct clk mclk_1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, - .flags = RATE_FIXED, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 6, }; @@ -514,7 +503,6 @@ static struct clk bclk_1510 = { .ops = &clkops_generic, /* Direct from ULPD, no parent. May be enabled by ext hardware. */ .rate = 12000000, - .flags = RATE_FIXED, }; static struct clk bclk_16xx = { @@ -529,36 +517,34 @@ static struct clk bclk_16xx = { }; static struct clk mmc1_ck = { - .name = "mmc_ck", + .name = "mmc1_ck", .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 23, }; static struct clk mmc2_ck = { - .name = "mmc_ck", - .id = 1, + .name = "mmc2_ck", .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0), .enable_bit = 20, }; static struct clk mmc3_ck = { - .name = "mmc_ck", - .id = 2, + .name = "mmc3_ck", .ops = &clkops_generic, /* Functional clock is direct from ULPD, interface clock is ARMPER */ .parent = &armper_ck.clk, .rate = 48000000, - .flags = RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, + .flags = ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT, .enable_reg = OMAP1_IO_ADDRESS(SOFT_REQ_REG), .enable_bit = 12, }; @@ -576,7 +562,6 @@ static struct clk virtual_ck_mpu = { remains active during MPU idle whenever this is enabled */ static struct clk i2c_fck = { .name = "i2c_fck", - .id = 1, .ops = &clkops_null, .flags = CLOCK_NO_IDLE_PARENT, .parent = &armxor_ck.clk, @@ -585,7 +570,6 @@ static struct clk i2c_fck = { static struct clk i2c_ick = { .name = "i2c_ick", - .id = 1, .ops = &clkops_null, .flags = CLOCK_NO_IDLE_PARENT, .parent = &armper_ck.clk, @@ -599,7 +583,7 @@ static struct clk i2c_ick = { static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), - CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310 | CK_7XX), /* CK_GEN1 clocks */ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), CLK(NULL, "ck_sossi", &sossi_ck, CK_16XX), @@ -627,7 +611,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "tc2_ck", &tc2_ck, CK_16XX), CLK(NULL, "dma_ck", &dma_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX), - CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "api_ck", &api_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), @@ -658,6 +642,10 @@ static struct omap_clk omap_clks[] = { CLK("i2c_omap.1", "fck", &i2c_fck, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK("i2c_omap.1", "ick", &i2c_ick, CK_16XX), CLK("i2c_omap.1", "ick", &dummy_ck, CK_1510 | CK_310 | CK_7XX), + CLK("omap1_spi100k.1", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.1", "ick", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "fck", &dummy_ck, CK_7XX), + CLK("omap1_spi100k.2", "ick", &dummy_ck, CK_7XX), CLK("omap_uwire", "fck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap-mcbsp.1", "ick", &dspper_ck, CK_16XX), CLK("omap-mcbsp.1", "ick", &dummy_ck, CK_1510 | CK_310), @@ -674,7 +662,7 @@ static struct omap_clk omap_clks[] = { * init */ -static struct clk_functions omap1_clk_functions __initdata = { +static struct clk_functions omap1_clk_functions = { .clk_enable = omap1_clk_enable, .clk_disable = omap1_clk_disable, .clk_round_rate = omap1_clk_round_rate, diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 23ded2d49600..379100c17639 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/spi/spi.h> #include <mach/hardware.h> #include <asm/mach/map.h> @@ -23,6 +24,7 @@ #include <plat/mux.h> #include <mach/gpio.h> #include <plat/mmc.h> +#include <plat/omap7xx.h> /*-------------------------------------------------------------------------*/ @@ -71,7 +73,7 @@ static inline void omap_init_rtc(void) {} # define INT_DSP_MAILBOX1 INT_1610_DSP_MAILBOX1 #endif -#define OMAP1_MBOX_BASE OMAP1_IO_ADDRESS(OMAP16XX_MAILBOX_BASE) +#define OMAP1_MBOX_BASE OMAP16XX_MAILBOX_BASE static struct resource mbox_resources[] = { { @@ -196,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, /*-------------------------------------------------------------------------*/ +/* OMAP7xx SPI support */ +#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE) + +struct platform_device omap_spi1 = { + .name = "omap1_spi100k", + .id = 1, +}; + +struct platform_device omap_spi2 = { + .name = "omap1_spi100k", + .id = 2, +}; + +static void omap_init_spi100k(void) +{ + omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff); + if (omap_spi1.dev.platform_data) + platform_device_register(&omap_spi1); + + omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff); + if (omap_spi2.dev.platform_data) + platform_device_register(&omap_spi2); +} + +#else +static inline void omap_init_spi100k(void) +{ +} +#endif + +/*-------------------------------------------------------------------------*/ + #if defined(CONFIG_OMAP_STI) #define OMAP1_STI_BASE 0xfffea000 @@ -263,6 +297,7 @@ static int __init omap1_init_devices(void) omap_init_mbox(); omap_init_rtc(); + omap_init_spi100k(); omap_init_sti(); return 0; diff --git a/arch/arm/mach-omap1/flash.c b/arch/arm/mach-omap1/flash.c new file mode 100644 index 000000000000..0b07a78eeaa7 --- /dev/null +++ b/arch/arm/mach-omap1/flash.c @@ -0,0 +1,33 @@ +/* + * Flash support for OMAP1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> + +#include <plat/io.h> +#include <plat/tc.h> + +void omap1_set_vpp(struct map_info *map, int enable) +{ + static int count; + u32 l; + + if (enable) { + if (count++ == 0) { + l = omap_readl(EMIFS_CONFIG); + l |= OMAP_EMIFS_CONFIG_WP; + omap_writel(l, EMIFS_CONFIG); + } + } else { + if (count && (--count == 0)) { + l = omap_readl(EMIFS_CONFIG); + l &= ~OMAP_EMIFS_CONFIG_WP; + omap_writel(l, EMIFS_CONFIG); + } + } +} diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c index 1bf4735e27a6..5446c9912641 100644 --- a/arch/arm/mach-omap1/i2c.c +++ b/arch/arm/mach-omap1/i2c.c @@ -23,9 +23,7 @@ #include <plat/mux.h> #include <plat/cpu.h> -int __init omap_register_i2c_bus(int bus_id, u32 clkrate, - struct i2c_board_info const *info, - unsigned len) +void __init omap1_i2c_mux_pins(int bus_id) { if (cpu_is_omap7xx()) { omap_cfg_reg(I2C_7XX_SDA); @@ -34,6 +32,4 @@ int __init omap_register_i2c_bus(int bus_id, u32 clkrate, omap_cfg_reg(I2C_SDA); omap_cfg_reg(I2C_SCL); } - - return omap_plat_register_i2c_bus(bus_id, clkrate, info, len); } diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S index aedb746fc33c..b6d9584544b4 100644 --- a/arch/arm/mach-omap1/include/mach/debug-macro.S +++ b/arch/arm/mach-omap1/include/mach/debug-macro.S @@ -11,18 +11,80 @@ * */ - .macro addruart,rx +#include <linux/serial_reg.h> + +#include <plat/serial.h> + + .pushsection .data +omap_uart_phys: .word 0x0 +omap_uart_virt: .word 0x0 + .popsection + + /* + * Note that this code won't work if the bootloader passes + * a wrong machine ID number in r1. To debug, just hardcode + * the desired UART phys and virt addresses temporarily into + * the omap_uart_phys and omap_uart_virt above. + */ + .macro addruart, rx, tmp + + /* Use omap_uart_phys/virt if already configured */ +9: mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + ldreq \rx, =omap_uart_phys @ physical base address + ldrne \rx, =omap_uart_virt @ virtual base + ldr \rx, [\rx, #0] + cmp \rx, #0 @ is port configured? + bne 99f @ already configured + + /* Check 7XX UART1 scratchpad register for uart to use */ + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 @ MMU enabled? + moveq \rx, #0xff000000 @ physical base address + movne \rx, #0xfe000000 @ virtual base + orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 + ldrb \rx, [\rx, #(UART_SCR << OMAP7XX_PORT_SHIFT)] + cmp \rx, #0 @ anything in 7XX scratchpad? + bne 10f @ found 7XX uart + + /* Check 15xx/16xx UART1 scratchpad register for uart to use */ mrc p15, 0, \rx, c1, c0 tst \rx, #1 @ MMU enabled? moveq \rx, #0xff000000 @ physical base address movne \rx, #0xfe000000 @ virtual base - orr \rx, \rx, #0x00fb0000 -#ifdef CONFIG_OMAP_LL_DEBUG_UART3 - orr \rx, \rx, #0x00009000 @ UART 3 -#endif -#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3) - orr \rx, \rx, #0x00000800 @ UART 2 & 3 -#endif + orr \rx, \rx, #0x00fb0000 @ OMAP1UART1 + ldrb \rx, [\rx, #(UART_SCR << OMAP_PORT_SHIFT)] + + /* Select the UART to use based on the UART1 scratchpad value */ +10: cmp \rx, #0 @ no port configured? + beq 11f @ if none, try to use UART1 + cmp \rx, #OMAP1UART1 + beq 11f @ configure OMAP1UART1 + cmp \rx, #OMAP1UART2 + beq 12f @ configure OMAP1UART2 + cmp \rx, #OMAP1UART3 + beq 13f @ configure OMAP2UART3 + + /* Configure the UART offset from the phys/virt base */ +11: mov \rx, #0x00fb0000 @ OMAP1UART1 + b 98f +12: mov \rx, #0x00fb0000 @ OMAP1UART1 + orr \rx, \rx, #0x00000800 @ OMAP1UART2 + b 98f +13: mov \rx, #0x00fb0000 @ OMAP1UART1 + orr \rx, \rx, #0x00000800 @ OMAP1UART2 + orr \rx, \rx, #0x00009000 @ OMAP1UART3 + + /* Store both phys and virt address for the uart */ +98: add \rx, \rx, #0xff000000 @ phys base + ldr \tmp, =omap_uart_phys + str \rx, [\tmp, #0] + sub \rx, \rx, #0xff000000 @ phys base + add \rx, \rx, #0xfe000000 @ virt base + ldr \tmp, =omap_uart_virt + str \rx, [\tmp, #0] + b 9b +99: .endm .macro senduart,rd,rx @@ -30,13 +92,13 @@ .endm .macro busyuart,rd,rx -1001: ldrb \rd, [\rx, #(0x5 << 2)] @ OMAP-1510 and friends - and \rd, \rd, #0x60 - teq \rd, #0x60 +1001: ldrb \rd, [\rx, #(UART_LSR << OMAP_PORT_SHIFT)] + and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) + teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) beq 1002f - ldrb \rd, [\rx, #(0x5 << 0)] @ OMAP-730 only - and \rd, \rd, #0x60 - teq \rd, #0x60 + ldrb \rd, [\rx, #(UART_LSR << OMAP7XX_PORT_SHIFT)] + and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE) + teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE) bne 1001b 1002: .endm diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c index caf889aaa248..4f5b3da3d559 100644 --- a/arch/arm/mach-omap1/mailbox.c +++ b/arch/arm/mach-omap1/mailbox.c @@ -146,7 +146,6 @@ EXPORT_SYMBOL(mbox_dsp_info); static int __devinit omap1_mbox_probe(struct platform_device *pdev) { struct resource *res; - int ret = 0; if (pdev->num_resources != 2) { dev_err(&pdev->dev, "invalid number of resources: %d\n", @@ -160,12 +159,18 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev) dev_err(&pdev->dev, "invalid mem resource\n"); return -ENODEV; } - mbox_base = res->start; + + mbox_base = ioremap(res->start, resource_size(res)); + if (!mbox_base) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -ENODEV; + } /* DSP IRQ */ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (unlikely(!res)) { dev_err(&pdev->dev, "invalid irq resource\n"); + iounmap(mbox_base); return -ENODEV; } mbox_dsp_info.irq = res->start; diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 6bddce104ee9..e9bdff192f82 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -16,6 +16,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <mach/irqs.h> #include <plat/dma.h> @@ -99,9 +100,11 @@ static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { }, }; #define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata) +#define OMAP7XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1) #else #define omap7xx_mcbsp_pdata NULL #define OMAP7XX_MCBSP_PDATA_SZ 0 +#define OMAP7XX_MCBSP_REG_NUM 0 #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -132,9 +135,11 @@ static struct omap_mcbsp_platform_data omap15xx_mcbsp_pdata[] = { }, }; #define OMAP15XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap15xx_mcbsp_pdata) +#define OMAP15XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1) #else #define omap15xx_mcbsp_pdata NULL #define OMAP15XX_MCBSP_PDATA_SZ 0 +#define OMAP15XX_MCBSP_REG_NUM 0 #endif #ifdef CONFIG_ARCH_OMAP16XX @@ -165,19 +170,25 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { }, }; #define OMAP16XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap16xx_mcbsp_pdata) +#define OMAP16XX_MCBSP_REG_NUM (OMAP_MCBSP_REG_XCERH / sizeof(u16) + 1) #else #define omap16xx_mcbsp_pdata NULL #define OMAP16XX_MCBSP_PDATA_SZ 0 +#define OMAP16XX_MCBSP_REG_NUM 0 #endif int __init omap1_mcbsp_init(void) { - if (cpu_is_omap7xx()) + if (cpu_is_omap7xx()) { omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; - if (cpu_is_omap15xx()) + omap_mcbsp_cache_size = OMAP7XX_MCBSP_REG_NUM * sizeof(u16); + } else if (cpu_is_omap15xx()) { omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; - if (cpu_is_omap16xx()) + omap_mcbsp_cache_size = OMAP15XX_MCBSP_REG_NUM * sizeof(u16); + } else if (cpu_is_omap16xx()) { omap_mcbsp_count = OMAP16XX_MCBSP_PDATA_SZ; + omap_mcbsp_cache_size = OMAP16XX_MCBSP_REG_NUM * sizeof(u16); + } mcbsp_ptr = kzalloc(omap_mcbsp_count * sizeof(struct omap_mcbsp *), GFP_KERNEL); diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 07212cc621ae..84341377232d 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -62,6 +62,14 @@ MUX_CFG_7XX("MMC_7XX_DAT0", 2, 17, 0, 16, 1, 0) /* I2C interface */ MUX_CFG_7XX("I2C_7XX_SCL", 5, 1, 0, 0, 1, 0) MUX_CFG_7XX("I2C_7XX_SDA", 5, 5, 0, 0, 1, 0) + +/* SPI pins */ +MUX_CFG_7XX("SPI_7XX_1", 6, 5, 4, 4, 1, 0) +MUX_CFG_7XX("SPI_7XX_2", 6, 9, 4, 8, 1, 0) +MUX_CFG_7XX("SPI_7XX_3", 6, 13, 4, 12, 1, 0) +MUX_CFG_7XX("SPI_7XX_4", 6, 17, 4, 16, 1, 0) +MUX_CFG_7XX("SPI_7XX_5", 8, 25, 0, 24, 0, 0) +MUX_CFG_7XX("SPI_7XX_6", 9, 5, 0, 4, 0, 0) }; #define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 6e5207c81cf4..349de90194e3 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -64,7 +64,7 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p) static struct plat_serial8250_port serial_platform_data[] = { { - .mapbase = OMAP_UART1_BASE, + .mapbase = OMAP1_UART1_BASE, .irq = INT_UART1, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -72,7 +72,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .mapbase = OMAP_UART2_BASE, + .mapbase = OMAP1_UART2_BASE, .irq = INT_UART2, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, @@ -80,7 +80,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .uartclk = OMAP16XX_BASE_BAUD * 16, }, { - .mapbase = OMAP_UART3_BASE, + .mapbase = OMAP1_UART3_BASE, .irq = INT_UART3, .flags = UPF_BOOT_AUTOCONF, .iotype = UPIO_MEM, diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 9ad118563f7d..20cfbcc6c60c 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -68,12 +68,6 @@ struct sys_timer omap_timer; * --------------------------------------------------------------------------- */ -#if defined(CONFIG_ARCH_OMAP16XX) -#define TIMER_32K_SYNCHRONIZED 0xfffbc410 -#else -#error OMAP 32KHz timer does not currently work on 15XX! -#endif - /* 16xx specific defines */ #define OMAP1_32K_TIMER_BASE 0xfffb9000 #define OMAP1_32K_TIMER_CR 0x08 @@ -150,15 +144,6 @@ static struct clock_event_device clockevent_32k_timer = { .set_mode = omap_32k_timer_set_mode, }; -/* - * The 32KHz synchronized timer is an additional timer on 16xx. - * It is always running. - */ -static inline unsigned long omap_32k_sync_timer_read(void) -{ - return omap_readl(TIMER_32K_SYNCHRONIZED); -} - static irqreturn_t omap_32k_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = &clockevent_32k_timer; |