diff options
Diffstat (limited to 'arch/arm/mach-omap2')
50 files changed, 746 insertions, 198 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index cd7332f50b2d..1c0c2b02d870 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -187,16 +187,19 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom.o \ board-zoom-peripherals.o \ + board-zoom-display.o \ board-flash.o \ hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_ZOOM3) += board-zoom.o \ board-zoom-peripherals.o \ + board-zoom-display.o \ board-flash.o \ hsmmc.o \ board-zoom-debugboard.o obj-$(CONFIG_MACH_OMAP_3630SDP) += board-3630sdp.o \ board-zoom-peripherals.o \ + board-zoom-display.o \ board-flash.o \ hsmmc.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 3b39ef1a680a..d4e41ef86aa5 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -38,6 +38,7 @@ #include <plat/dma.h> #include <plat/gpmc.h> #include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <plat/gpmc-smc91x.h> @@ -270,13 +271,18 @@ static struct omap_dss_device sdp3430_lcd_device = { .platform_disable = sdp3430_panel_disable_lcd, }; +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = sdp3430_panel_enable_dvi, + .platform_disable = sdp3430_panel_disable_dvi, +}; + static struct omap_dss_device sdp3430_dvi_device = { .name = "dvi", - .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, .phy.dpi.data_lines = 24, - .platform_enable = sdp3430_panel_enable_dvi, - .platform_disable = sdp3430_panel_disable_dvi, }; static struct omap_dss_device sdp3430_tv_device = { diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 5d41dbe059a3..62645640f5e4 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -207,6 +207,7 @@ static void __init omap_sdp_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); zoom_peripherals_init(); + zoom_display_init(); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp); enable_board_wakeup_source(); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index a70bdf28e2bc..07d1b20b1148 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -554,6 +554,7 @@ static void __init omap_sfh7741prox_init(void) #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + OMAP4_MUX(USBB2_ULPITLL_CLK, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -576,11 +577,12 @@ static void __init omap_4430sdp_init(void) omap4_twl6030_hsmmc_init(mmc); /* Power on the ULPI PHY */ - if (gpio_is_valid(OMAP4SDP_MDM_PWR_EN_GPIO)) { - /* FIXME: Assumes pad is already muxed for GPIO mode */ - gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3"); + status = gpio_request(OMAP4SDP_MDM_PWR_EN_GPIO, "USBB1 PHY VMDM_3V3"); + if (status) + pr_err("%s: Could not get USBB1 PHY GPIO\n", __func__); + else gpio_direction_output(OMAP4SDP_MDM_PWR_EN_GPIO, 1); - } + usb_ehci_init(&ehci_pdata); usb_musb_init(&musb_board_data); diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index bc1562648020..10d60b7743cf 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -35,6 +35,7 @@ #include <plat/common.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include "mux.h" #include "control.h" @@ -303,13 +304,18 @@ static void am3517_evm_panel_disable_lcd(struct omap_dss_device *dssdev) lcd_enabled = 0; } +static struct panel_generic_dpi_data lcd_panel = { + .name = "sharp_lq", + .platform_enable = am3517_evm_panel_enable_lcd, + .platform_disable = am3517_evm_panel_disable_lcd, +}; + static struct omap_dss_device am3517_evm_lcd_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "lcd", - .driver_name = "sharp_lq_panel", + .driver_name = "generic_dpi_panel", + .data = &lcd_panel, .phy.dpi.data_lines = 16, - .platform_enable = am3517_evm_panel_enable_lcd, - .platform_disable = am3517_evm_panel_disable_lcd, }; static int am3517_evm_panel_enable_tv(struct omap_dss_device *dssdev) @@ -346,13 +352,18 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev) dvi_enabled = 0; } +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = am3517_evm_panel_enable_dvi, + .platform_disable = am3517_evm_panel_disable_dvi, +}; + static struct omap_dss_device am3517_evm_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "generic_panel", + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, .phy.dpi.data_lines = 24, - .platform_enable = am3517_evm_panel_enable_dvi, - .platform_disable = am3517_evm_panel_disable_dvi, }; static struct omap_dss_device *am3517_evm_dss_devices[] = { diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 486a3de5f401..dac141610666 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -46,6 +46,7 @@ #include <plat/gpmc.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <plat/mcspi.h> #include <mach/hardware.h> @@ -351,22 +352,32 @@ static void cm_t35_panel_disable_tv(struct omap_dss_device *dssdev) { } +static struct panel_generic_dpi_data lcd_panel = { + .name = "toppoly_tdo35s", + .platform_enable = cm_t35_panel_enable_lcd, + .platform_disable = cm_t35_panel_disable_lcd, +}; + static struct omap_dss_device cm_t35_lcd_device = { .name = "lcd", - .driver_name = "toppoly_tdo35s_panel", .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &lcd_panel, .phy.dpi.data_lines = 18, - .platform_enable = cm_t35_panel_enable_lcd, - .platform_disable = cm_t35_panel_disable_lcd, +}; + +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = cm_t35_panel_enable_dvi, + .platform_disable = cm_t35_panel_disable_dvi, }; static struct omap_dss_device cm_t35_dvi_device = { .name = "dvi", - .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, .phy.dpi.data_lines = 24, - .platform_enable = cm_t35_panel_enable_dvi, - .platform_disable = cm_t35_panel_disable_dvi, }; static struct omap_dss_device cm_t35_tv_device = { diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index 5b0c77732dfc..8f9a64d650ee 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -124,8 +124,9 @@ static inline void cm_t3517_init_hecc(void) {} #if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE) #define RTC_IO_GPIO (153) #define RTC_WR_GPIO (154) -#define RTC_RD_GPIO (160) +#define RTC_RD_GPIO (53) #define RTC_CS_GPIO (163) +#define RTC_CS_EN_GPIO (160) struct v3020_platform_data cm_t3517_v3020_pdata = { .use_gpio = 1, @@ -145,6 +146,16 @@ static struct platform_device cm_t3517_rtc_device = { static void __init cm_t3517_init_rtc(void) { + int err; + + err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); + if (err) { + pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); + return; + } + + gpio_direction_output(RTC_CS_EN_GPIO, 1); + platform_device_register(&cm_t3517_rtc_device); } #else @@ -214,12 +225,12 @@ static struct mtd_partition cm_t3517_nand_partitions[] = { }, { .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ .size = 32 * NAND_BLOCK_SIZE, }, { .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ .size = MTDPART_SIZ_FULL, }, }; @@ -256,11 +267,19 @@ static void __init cm_t3517_init_irq(void) static struct omap_board_mux board_mux[] __initdata = { /* GPIO186 - Green LED */ OMAP3_MUX(SYS_CLKOUT2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* RTC GPIOs: IO, WR#, RD#, CS# */ + + /* RTC GPIOs: */ + /* IO - GPIO153 */ OMAP3_MUX(MCBSP4_DR, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* WR# - GPIO154 */ OMAP3_MUX(MCBSP4_DX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* RD# - GPIO53 */ + OMAP3_MUX(GPMC_NCS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* CS# - GPIO163 */ OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* CS EN - GPIO160 */ + OMAP3_MUX(MCBSP_CLKS, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), + /* HSUSB1 RESET */ OMAP3_MUX(UART2_TX, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), /* HSUSB2 RESET */ diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 451e7ff08b18..9a2a31e011ce 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -46,6 +46,7 @@ #include <plat/nand.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -114,9 +115,6 @@ static struct omap2_hsmmc_info mmc[] = { static int devkit8000_panel_enable_lcd(struct omap_dss_device *dssdev) { - twl_i2c_write_u8(TWL4030_MODULE_GPIO, 0x80, REG_GPIODATADIR1); - twl_i2c_write_u8(TWL4030_MODULE_LED, 0x0, 0x0); - if (gpio_is_valid(dssdev->reset_gpio)) gpio_set_value_cansleep(dssdev->reset_gpio, 1); return 0; @@ -149,23 +147,32 @@ static struct regulator_consumer_supply devkit8000_vmmc1_supply = static struct regulator_consumer_supply devkit8000_vio_supply = REGULATOR_SUPPLY("vcc", "spi2.0"); +static struct panel_generic_dpi_data lcd_panel = { + .name = "generic", + .platform_enable = devkit8000_panel_enable_lcd, + .platform_disable = devkit8000_panel_disable_lcd, +}; + static struct omap_dss_device devkit8000_lcd_device = { .name = "lcd", - .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &lcd_panel, .phy.dpi.data_lines = 24, - .reset_gpio = -EINVAL, /* will be replaced */ - .platform_enable = devkit8000_panel_enable_lcd, - .platform_disable = devkit8000_panel_disable_lcd, }; + +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = devkit8000_panel_enable_dvi, + .platform_disable = devkit8000_panel_disable_dvi, +}; + static struct omap_dss_device devkit8000_dvi_device = { .name = "dvi", - .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = -EINVAL, /* will be replaced */ - .platform_enable = devkit8000_panel_enable_dvi, - .platform_disable = devkit8000_panel_disable_dvi, }; static struct omap_dss_device devkit8000_tv_device = { @@ -237,6 +244,8 @@ static struct gpio_led gpio_leds[]; static int devkit8000_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; @@ -245,17 +254,23 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - /* gpio + 1 is "LCD_PWREN" (out, active high) */ - devkit8000_lcd_device.reset_gpio = gpio + 1; - gpio_request(devkit8000_lcd_device.reset_gpio, "LCD_PWREN"); - /* Disable until needed */ - gpio_direction_output(devkit8000_lcd_device.reset_gpio, 0); + /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ + devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; + ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + if (ret < 0) { + devkit8000_lcd_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); + } /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; - gpio_request(devkit8000_dvi_device.reset_gpio, "DVI PowerDown"); - /* Disable until needed */ - gpio_direction_output(devkit8000_dvi_device.reset_gpio, 0); + ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, + GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + if (ret < 0) { + devkit8000_dvi_device.reset_gpio = -EINVAL; + printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); + } return 0; } @@ -265,8 +280,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = { .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .pullups = BIT(1), - .pulldowns = BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13) + .pulldowns = BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13) | BIT(15) | BIT(16) | BIT(17), .setup = devkit8000_twl_gpio_setup, }; diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 0afa3011db0f..3be85a1f55f4 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/interrupt.h> +#include <linux/input.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -31,6 +32,7 @@ #include <plat/gpmc.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <plat/onenand.h> #include "mux.h" @@ -459,13 +461,18 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev) gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0); } +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = igep2_enable_dvi, + .platform_disable = igep2_disable_dvi, +}; + static struct omap_dss_device igep2_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "generic_panel", + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, .phy.dpi.data_lines = 24, - .platform_enable = igep2_enable_dvi, - .platform_disable = igep2_disable_dvi, }; static struct omap_dss_device *igep2_dss_devices[] = { @@ -535,6 +542,37 @@ static struct twl4030_codec_data igep2_codec_data = { .audio = &igep2_audio_data, }; +static int igep2_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_A), + KEY(0, 3, KEY_B), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_F), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_I), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_K), + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P) +}; + +static struct matrix_keymap_data igep2_keymap_data = { + .keymap = igep2_keymap, + .keymap_size = ARRAY_SIZE(igep2_keymap), +}; + +static struct twl4030_keypad_data igep2_keypad_pdata = { + .keymap_data = &igep2_keymap_data, + .rows = 4, + .cols = 4, + .rep = 1, +}; + static struct twl4030_platform_data igep2_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -543,6 +581,7 @@ static struct twl4030_platform_data igep2_twldata = { .usb = &igep2_usb_data, .codec = &igep2_codec_data, .gpio = &igep2_twl4030_gpio_pdata, + .keypad = &igep2_keypad_pdata, .vmmc1 = &igep2_vmmc1, .vpll2 = &igep2_vpll2, .vio = &igep2_vio, diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index bcccd68f1856..4dc62a9b9cb2 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -19,6 +19,7 @@ #include <linux/interrupt.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/i2c/twl.h> #include <linux/mmc/host.h> @@ -43,7 +44,7 @@ #define IGEP3_GPIO_WIFI_NRESET 139 #define IGEP3_GPIO_BT_NRESET 137 -#define IGEP3_GPIO_USBH_NRESET 115 +#define IGEP3_GPIO_USBH_NRESET 183 #if defined(CONFIG_MTD_ONENAND_OMAP2) || \ @@ -103,7 +104,7 @@ static struct platform_device igep3_onenand_device = { }, }; -void __init igep3_flash_init(void) +static void __init igep3_flash_init(void) { u8 cs = 0; u8 onenandcs = GPMC_CS_NUM + 1; @@ -137,12 +138,11 @@ void __init igep3_flash_init(void) } #else -void __init igep3_flash_init(void) {} +static void __init igep3_flash_init(void) {} #endif -static struct regulator_consumer_supply igep3_vmmc1_supply = { - .supply = "vmmc", -}; +static struct regulator_consumer_supply igep3_vmmc1_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.0"); /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep3_vmmc1 = { @@ -159,6 +159,52 @@ static struct regulator_init_data igep3_vmmc1 = { .consumer_supplies = &igep3_vmmc1_supply, }; +static struct regulator_consumer_supply igep3_vio_supply = + REGULATOR_SUPPLY("vmmc_aux", "mmci-omap-hs.1"); + +static struct regulator_init_data igep3_vio = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep3_vio_supply, +}; + +static struct regulator_consumer_supply igep3_vmmc2_supply = + REGULATOR_SUPPLY("vmmc", "mmci-omap-hs.1"); + +static struct regulator_init_data igep3_vmmc2 = { + .constraints = { + .valid_modes_mask = REGULATOR_MODE_NORMAL, + .always_on = 1, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &igep3_vmmc2_supply, +}; + +static struct fixed_voltage_config igep3_vwlan = { + .supply_name = "vwlan", + .microvolts = 3300000, + .gpio = -EINVAL, + .enabled_at_boot = 1, + .init_data = &igep3_vmmc2, +}; + +static struct platform_device igep3_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &igep3_vwlan, + }, +}; + static struct omap2_hsmmc_info mmc[] = { [0] = { .mmc = 1, @@ -254,12 +300,6 @@ static int igep3_twl4030_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* - * link regulators to MMC adapters ... we "know" the - * regulators will be set up only *after* we return. - */ - igep3_vmmc1_supply.dev = mmc[0].dev; - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) @@ -287,6 +327,10 @@ static struct twl4030_usb_data igep3_twl4030_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; +static struct platform_device *igep3_devices[] __initdata = { + &igep3_vwlan_device, +}; + static void __init igep3_init_irq(void) { omap2_init_common_infrastructure(); @@ -303,6 +347,7 @@ static struct twl4030_platform_data igep3_twl4030_pdata = { .usb = &igep3_twl4030_usb_data, .gpio = &igep3_twl4030_gpio_pdata, .vmmc1 = &igep3_vmmc1, + .vio = &igep3_vio, }; static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { @@ -363,8 +408,20 @@ static void __init igep3_wifi_bt_init(void) void __init igep3_wifi_bt_init(void) {} #endif +static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { + .port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN, + .port_mode[1] = EHCI_HCD_OMAP_MODE_PHY, + .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, + .reset_gpio_port[2] = -EINVAL, +}; + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { + OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif @@ -375,9 +432,10 @@ static void __init igep3_init(void) /* Register I2C busses and drivers */ igep3_i2c_init(); - + platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); omap_serial_init(); usb_musb_init(&musb_board_data); + usb_ehci_init(&ehci_pdata); igep3_flash_init(); igep3_leds_init(); @@ -392,6 +450,7 @@ static void __init igep3_init(void) MACHINE_START(IGEP0030, "IGEP OMAP3 module") .boot_params = 0x80000100, + .reserve = omap_reserve, .map_io = omap3_map_io, .init_irq = igep3_init_irq, .init_machine = igep3_init, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 6c127605942f..46d814ab5656 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -41,6 +41,7 @@ #include <plat/board.h> #include <plat/common.h> #include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <plat/gpmc.h> #include <plat/nand.h> #include <plat/usb.h> @@ -194,14 +195,19 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev) gpio_set_value(dssdev->reset_gpio, 0); } +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = beagle_enable_dvi, + .platform_disable = beagle_disable_dvi, +}; + static struct omap_dss_device beagle_dvi_device = { .type = OMAP_DISPLAY_TYPE_DPI, .name = "dvi", - .driver_name = "generic_panel", + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, .phy.dpi.data_lines = 24, - .reset_gpio = 170, - .platform_enable = beagle_enable_dvi, - .platform_disable = beagle_disable_dvi, + .reset_gpio = -EINVAL, }; static struct omap_dss_device beagle_tv_device = { @@ -273,6 +279,8 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int r; + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { mmc[0].gpio_wp = -EINVAL; } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || @@ -293,17 +301,63 @@ static int beagle_twl_gpio_setup(struct device *dev, /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ + if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) { + r = gpio_request(gpio + 1, "EHCI_nOC"); + if (!r) { + r = gpio_direction_input(gpio + 1); + if (r) + gpio_free(gpio + 1); + } + if (r) + pr_err("%s: unable to configure EHCI_nOC\n", __func__); + } - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); - - /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ + /* + * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active + * high / others active low) + */ gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); + else + gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + + /* DVI reset GPIO is different between beagle revisions */ + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) + beagle_dvi_device.reset_gpio = 129; + else + beagle_dvi_device.reset_gpio = 170; /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + /* + * gpio + 1 on Xm controls the TFP410's enable line (active low) + * gpio + 2 control varies depending on the board rev as follows: + * P7/P8 revisions(prototype): Camera EN + * A2+ revisions (production): LDO (supplies DVI, serial, led blocks) + */ + if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { + r = gpio_request(gpio + 1, "nDVI_PWR_EN"); + if (!r) { + r = gpio_direction_output(gpio + 1, 0); + if (r) + gpio_free(gpio + 1); + } + if (r) + pr_err("%s: unable to configure nDVI_PWR_EN\n", + __func__); + r = gpio_request(gpio + 2, "DVI_LDO_EN"); + if (!r) { + r = gpio_direction_output(gpio + 2, 1); + if (r) + gpio_free(gpio + 2); + } + if (r) + pr_err("%s: unable to configure DVI_LDO_EN\n", + __func__); + } + return 0; } diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 3de8d9b8ec76..323c3809ce39 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -43,6 +43,7 @@ #include <plat/common.h> #include <plat/mcspi.h> #include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" @@ -301,13 +302,18 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev) dvi_enabled = 0; } +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = omap3_evm_enable_dvi, + .platform_disable = omap3_evm_disable_dvi, +}; + static struct omap_dss_device omap3_evm_dvi_device = { .name = "dvi", - .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, .phy.dpi.data_lines = 24, - .platform_enable = omap3_evm_enable_dvi, - .platform_disable = omap3_evm_disable_dvi, }; static struct omap_dss_device *omap3_evm_dss_devices[] = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 9df9d9367608..2a2dad447e86 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -40,6 +40,7 @@ #include <plat/nand.h> #include <plat/usb.h> #include <plat/display.h> +#include <plat/panel-generic-dpi.h> #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> @@ -160,13 +161,18 @@ static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev) lcd_enabled = 0; } +static struct panel_generic_dpi_data lcd_panel = { + .name = "generic", + .platform_enable = omap3_stalker_enable_lcd, + .platform_disable = omap3_stalker_disable_lcd, +}; + static struct omap_dss_device omap3_stalker_lcd_device = { .name = "lcd", - .driver_name = "generic_panel", + .driver_name = "generic_dpi_panel", + .data = &lcd_panel, .phy.dpi.data_lines = 24, .type = OMAP_DISPLAY_TYPE_DPI, - .platform_enable = omap3_stalker_enable_lcd, - .platform_disable = omap3_stalker_disable_lcd, }; static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev) @@ -208,13 +214,18 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev) dvi_enabled = 0; } +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = omap3_stalker_enable_dvi, + .platform_disable = omap3_stalker_disable_dvi, +}; + static struct omap_dss_device omap3_stalker_dvi_device = { .name = "dvi", - .driver_name = "generic_panel", .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, .phy.dpi.data_lines = 24, - .platform_enable = omap3_stalker_enable_dvi, - .platform_disable = omap3_stalker_disable_dvi, }; static struct omap_dss_device *omap3_stalker_dss_devices[] = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 3094e2007844..e944025d5ef8 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/clk.h> #include <linux/io.h> #include <linux/leds.h> #include <linux/gpio.h> @@ -95,7 +96,16 @@ static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { static void __init omap4_ehci_init(void) { int ret; + struct clk *phy_ref_clk; + /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ + phy_ref_clk = clk_get(NULL, "auxclk3_ck"); + if (IS_ERR(phy_ref_clk)) { + pr_err("Cannot request auxclk3\n"); + goto error1; + } + clk_set_rate(phy_ref_clk, 19200000); + clk_enable(phy_ref_clk); /* disable the power to the usb hub prior to init */ ret = gpio_request(GPIO_HUB_POWER, "hub_power"); @@ -399,8 +409,6 @@ static void __init omap4_panda_init(void) platform_add_devices(panda_devices, ARRAY_SIZE(panda_devices)); omap_serial_init(); omap4_twl6030_hsmmc_init(mmc); - /* OMAP4 Panda uses internal transceiver so register nop transceiver */ - usb_nop_xceiv_register(); omap4_ehci_init(); usb_musb_init(&musb_board_data); } diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index cb77be7ac44f..39a71bb8a308 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -40,9 +40,6 @@ static struct regulator_consumer_supply rm680_vemmc_consumers[] = { static struct regulator_init_data rm680_vemmc = { .constraints = { .name = "rm680_vemmc", - .min_uV = 2900000, - .max_uV = 2900000, - .apply_uV = 1, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_STATUS diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c new file mode 100644 index 000000000000..6bcd43657aed --- /dev/null +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -0,0 +1,168 @@ +/* + * Copyright (C) 2010 Texas Instruments Inc. + * + * Modified from mach-omap2/board-zoom-peripherals.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/i2c/twl.h> +#include <linux/spi/spi.h> +#include <plat/mcspi.h> +#include <plat/display.h> + +#define LCD_PANEL_RESET_GPIO_PROD 96 +#define LCD_PANEL_RESET_GPIO_PILOT 55 +#define LCD_PANEL_QVGA_GPIO 56 + +static void zoom_lcd_panel_init(void) +{ + int ret; + unsigned char lcd_panel_reset_gpio; + + lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + LCD_PANEL_RESET_GPIO_PROD : + LCD_PANEL_RESET_GPIO_PILOT; + + ret = gpio_request(lcd_panel_reset_gpio, "lcd reset"); + if (ret) { + pr_err("Failed to get LCD reset GPIO (gpio%d).\n", + lcd_panel_reset_gpio); + return; + } + gpio_direction_output(lcd_panel_reset_gpio, 1); + + ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); + if (ret) { + pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n", + LCD_PANEL_QVGA_GPIO); + goto err0; + } + gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1); + + return; +err0: + gpio_free(lcd_panel_reset_gpio); +} + +static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + return 0; +} + +static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev) +{ +} + +/* + * PWMA/B register offsets (TWL4030_MODULE_PWMA) + */ +#define TWL_INTBR_PMBR1 0xD +#define TWL_INTBR_GPBR1 0xC +#define TWL_LED_PWMON 0x0 +#define TWL_LED_PWMOFF 0x1 + +static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level) +{ + unsigned char c; + u8 mux_pwm, enb_pwm; + + if (level > 100) + return -1; + + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &mux_pwm, TWL_INTBR_PMBR1); + twl_i2c_read_u8(TWL4030_MODULE_INTBR, &enb_pwm, TWL_INTBR_GPBR1); + + if (level == 0) { + /* disable pwm1 output and clock */ + enb_pwm = enb_pwm & 0xF5; + /* change pwm1 pin to gpio pin */ + mux_pwm = mux_pwm & 0xCF; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + enb_pwm, TWL_INTBR_GPBR1); + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + mux_pwm, TWL_INTBR_PMBR1); + return 0; + } + + if (!((enb_pwm & 0xA) && (mux_pwm & 0x30))) { + /* change gpio pin to pwm1 pin */ + mux_pwm = mux_pwm | 0x30; + /* enable pwm1 output and clock*/ + enb_pwm = enb_pwm | 0x0A; + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + mux_pwm, TWL_INTBR_PMBR1); + twl_i2c_write_u8(TWL4030_MODULE_INTBR, + enb_pwm, TWL_INTBR_GPBR1); + } + + c = ((50 * (100 - level)) / 100) + 1; + twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF); + twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON); + + return 0; +} + +static struct omap_dss_device zoom_lcd_device = { + .name = "lcd", + .driver_name = "NEC_8048_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 24, + .platform_enable = zoom_panel_enable_lcd, + .platform_disable = zoom_panel_disable_lcd, + .max_backlight_level = 100, + .set_backlight = zoom_set_bl_intensity, +}; + +static struct omap_dss_device *zoom_dss_devices[] = { + &zoom_lcd_device, +}; + +static struct omap_dss_board_info zoom_dss_data = { + .num_devices = ARRAY_SIZE(zoom_dss_devices), + .devices = zoom_dss_devices, + .default_device = &zoom_lcd_device, +}; + +static struct platform_device zoom_dss_device = { + .name = "omapdss", + .id = -1, + .dev = { + .platform_data = &zoom_dss_data, + }, +}; + +static struct omap2_mcspi_device_config dss_lcd_mcspi_config = { + .turbo_mode = 1, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct spi_board_info nec_8048_spi_board_info[] __initdata = { + [0] = { + .modalias = "nec_8048_spi", + .bus_num = 1, + .chip_select = 2, + .max_speed_hz = 375000, + .controller_data = &dss_lcd_mcspi_config, + }, +}; + +static struct platform_device *zoom_display_devices[] __initdata = { + &zoom_dss_device, +}; + +void __init zoom_display_init(void) +{ + platform_add_devices(zoom_display_devices, + ARRAY_SIZE(zoom_display_devices)); + spi_register_board_info(nec_8048_spi_board_info, + ARRAY_SIZE(nec_8048_spi_board_info)); + zoom_lcd_panel_init(); +} + diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 3fbd0edd712e..e0e040f34c68 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -35,6 +35,8 @@ #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) +#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES) + /* Zoom2 has Qwerty keyboard*/ static uint32_t board_keymap[] = { KEY(0, 0, KEY_E), @@ -190,7 +192,7 @@ static struct platform_device omap_vwlan_device = { }, }; -struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { +static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { .irq = OMAP_GPIO_IRQ(OMAP_ZOOM_WLAN_IRQ_GPIO), /* ZOOM ref clock is 26 MHz */ .board_ref_clock = 1, @@ -224,9 +226,43 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct regulator_consumer_supply zoom_vpll2_supply = + REGULATOR_SUPPLY("vdds_dsi", "omapdss"); + +static struct regulator_consumer_supply zoom_vdda_dac_supply = + REGULATOR_SUPPLY("vdda_dac", "omapdss"); + +static struct regulator_init_data zoom_vpll2 = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vpll2_supply, +}; + +static struct regulator_init_data zoom_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &zoom_vdda_dac_supply, +}; + static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); @@ -238,11 +274,19 @@ static int zoom_twl_gpio_setup(struct device *dev, zoom_vsim_supply.dev = mmc[0].dev; zoom_vmmc2_supply.dev = mmc[1].dev; - return 0; + ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable"); + if (ret) { + pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", + LCD_PANEL_ENABLE_GPIO); + return ret; + } + gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); + + return ret; } /* EXTMUTE callback function */ -void zoom2_set_hs_extmute(int mute) +static void zoom2_set_hs_extmute(int mute) { gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); } @@ -301,7 +345,8 @@ static struct twl4030_platform_data zoom_twldata = { .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, - + .vpll2 = &zoom_vpll2, + .vdac = &zoom_vdac, }; static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index e041c537ea37..e26754c24ee8 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -130,6 +130,7 @@ static void __init omap_zoom_init(void) ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init(); zoom_peripherals_init(); + zoom_display_init(); } MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index 337392c3f549..acb7ae5b0a25 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -77,7 +77,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n) dd = clk->dpll_data; /* DPLL divider must result in a valid jitter correction val */ - fint = clk->parent->rate / (n + 1); + fint = clk->parent->rate / n; if (fint < DPLL_FINT_BAND1_MIN) { pr_debug("rejecting n=%d due to Fint failure, " diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index d3ab1c9e50b0..403a4a1d3f9c 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3286,7 +3286,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("ehci-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2 | CK_AM35XX), + CLK("ehci-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index e8cb32fd7f13..de9ec8ddd2ae 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -34,7 +34,6 @@ #include "cm2_44xx.h" #include "cm-regbits-44xx.h" #include "prm44xx.h" -#include "prm44xx.h" #include "prm-regbits-44xx.h" #include "control.h" #include "scrm44xx.h" diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index e20b98636ab4..58e42f76603f 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -423,6 +423,12 @@ int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s/%s: %s: not yet implemented\n", + clkdm1->name, clkdm2->name, __func__); + return -EINVAL; + } + if (!clkdm1 || !clkdm2) return -EINVAL; @@ -458,6 +464,12 @@ int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) { struct clkdm_dep *cd; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s/%s: %s: not yet implemented\n", + clkdm1->name, clkdm2->name, __func__); + return -EINVAL; + } + if (!clkdm1 || !clkdm2) return -EINVAL; @@ -500,6 +512,12 @@ int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2) if (!clkdm1 || !clkdm2) return -EINVAL; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s/%s: %s: not yet implemented\n", + clkdm1->name, clkdm2->name, __func__); + return -EINVAL; + } + cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs); if (IS_ERR(cd)) { pr_debug("clockdomain: hardware cannot set/clear wake up of " @@ -527,6 +545,12 @@ int clkdm_clear_all_wkdeps(struct clockdomain *clkdm) struct clkdm_dep *cd; u32 mask = 0; + if (!cpu_is_omap24xx() && !cpu_is_omap34xx()) { + pr_err("clockdomain: %s: %s: not yet implemented\n", + clkdm->name, __func__); + return -EINVAL; + } + if (!clkdm) return -EINVAL; @@ -830,8 +854,7 @@ void omap2_clkdm_allow_idle(struct clockdomain *clkdm) * dependency code and data for OMAP4. */ if (cpu_is_omap44xx()) { - WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency " - "support is not yet implemented\n"); + pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); } else { if (atomic_read(&clkdm->usecount) > 0) _clkdm_add_autodeps(clkdm); @@ -872,8 +895,7 @@ void omap2_clkdm_deny_idle(struct clockdomain *clkdm) * dependency code and data for OMAP4. */ if (cpu_is_omap44xx()) { - WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency " - "support is not yet implemented\n"); + pr_err("clockdomain: %s: OMAP4 wakeup/sleep dependency support: not yet implemented\n", clkdm->name); } else { if (atomic_read(&clkdm->usecount) > 0) _clkdm_del_autodeps(clkdm); diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index de3faa20b46b..9b459c26fb85 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -103,9 +103,7 @@ struct clockdomain { const char *name; struct powerdomain *ptr; } pwrdm; -#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) const u16 clktrctrl_mask; -#endif const u8 flags; const u8 dep_bit; const u8 prcm_partition; diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index 51920fc7fc52..10622c914abc 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -30,8 +30,6 @@ #include "cm1_44xx.h" #include "cm2_44xx.h" -#include "cm1_44xx.h" -#include "cm2_44xx.h" #include "cm-regbits-44xx.h" #include "prm44xx.h" #include "prcm44xx.h" diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index f3e043fe5eb8..f7b22a16f385 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -47,6 +47,8 @@ #define OMAP3_STATE_MAX OMAP3_STATE_C7 +#define CPUIDLE_FLAG_CHECK_BM 0x10000 /* use omap3_enter_idle_bm() */ + struct omap3_processor_cx { u8 valid; u8 type; @@ -252,7 +254,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, * FIXME: we currently manage device-specific idle states * for PER and CORE in combination with CPU-specific * idle states. This is wrong, and device-specific - * idle managment needs to be separated out into + * idle management needs to be separated out into * its own code. */ diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 381f4eb92352..2c9c912f2c42 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -978,7 +978,7 @@ static int __init omap2_init_devices(void) arch_initcall(omap2_init_devices); #if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE) -struct omap_device_pm_latency omap_wdt_latency[] = { +static struct omap_device_pm_latency omap_wdt_latency[] = { [0] = { .deactivate_func = omap_device_idle_hwmods, .activate_func = omap_device_enable_hwmods, diff --git a/arch/arm/mach-omap2/dma.c b/arch/arm/mach-omap2/dma.c index d2f15f5cfd36..34922b2d2e3f 100644 --- a/arch/arm/mach-omap2/dma.c +++ b/arch/arm/mach-omap2/dma.c @@ -264,7 +264,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused) if (IS_ERR(od)) { pr_err("%s: Cant build omap_device for %s:%s.\n", __func__, name, oh->name); - return IS_ERR(od); + return PTR_ERR(od); } mem = platform_get_resource(&od->pdev, IORESOURCE_MEM, 0); diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h index f93ca3928c3b..d20bd9c1a106 100644 --- a/arch/arm/mach-omap2/include/mach/board-zoom.h +++ b/arch/arm/mach-omap2/include/mach/board-zoom.h @@ -1,9 +1,12 @@ /* * Defines for zoom boards */ +#include <plat/display.h> + #define ZOOM_NAND_CS 0 extern int __init zoom_debugboard_init(void); extern void __init zoom_peripherals_init(void); +extern void __init zoom_display_init(void); #define ZOOM2_HEADSET_EXTMUTE_GPIO 153 diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index befa321c4c13..81985a665cb3 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -38,20 +38,6 @@ */ #ifdef MULTI_OMAP2 - -/* - * We use __glue to avoid errors with multiple definitions of - * .globl omap_irq_base as it's included from entry-armv.S but not - * from entry-common.S. - */ -#ifdef __glue - .pushsection .data - .globl omap_irq_base -omap_irq_base: - .word 0 - .popsection -#endif - /* * Configure the interrupt base on the first interrupt. * See also omap_irq_base_init for setting omap_irq_base. diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index e66687b0b9de..c2032041d26f 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -314,14 +314,13 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } +void __iomem *omap_irq_base; + /* * Initialize asm_irq_base for entry-macro.S */ static inline void omap_irq_base_init(void) { - extern void __iomem *omap_irq_base; - -#ifdef MULTI_OMAP2 if (cpu_is_omap24xx()) omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE); else if (cpu_is_omap34xx()) @@ -330,7 +329,6 @@ static inline void omap_irq_base_init(void) omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE); else pr_err("Could not initialize omap_irq_base\n"); -#endif } void __init omap2_init_common_infrastructure(void) diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 85bf8ca95fd3..23049c487c47 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -100,13 +100,14 @@ static int omap_check_spurious(unsigned int irq) } /* XXX: FIQ and additional INTC support (only MPU at the moment) */ -static void omap_ack_irq(unsigned int irq) +static void omap_ack_irq(struct irq_data *d) { intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL); } -static void omap_mask_irq(unsigned int irq) +static void omap_mask_irq(struct irq_data *d) { + unsigned int irq = d->irq; int offset = irq & (~(IRQ_BITS_PER_REG - 1)); if (cpu_is_omap34xx()) { @@ -128,8 +129,9 @@ static void omap_mask_irq(unsigned int irq) intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset); } -static void omap_unmask_irq(unsigned int irq) +static void omap_unmask_irq(struct irq_data *d) { + unsigned int irq = d->irq; int offset = irq & (~(IRQ_BITS_PER_REG - 1)); irq &= (IRQ_BITS_PER_REG - 1); @@ -137,17 +139,17 @@ static void omap_unmask_irq(unsigned int irq) intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset); } -static void omap_mask_ack_irq(unsigned int irq) +static void omap_mask_ack_irq(struct irq_data *d) { - omap_mask_irq(irq); - omap_ack_irq(irq); + omap_mask_irq(d); + omap_ack_irq(d); } static struct irq_chip omap_irq_chip = { - .name = "INTC", - .ack = omap_mask_ack_irq, - .mask = omap_mask_irq, - .unmask = omap_unmask_irq, + .name = "INTC", + .irq_ack = omap_mask_ack_irq, + .irq_mask = omap_mask_irq, + .irq_unmask = omap_unmask_irq, }; static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c index 394413dc7deb..24b88504df0f 100644 --- a/arch/arm/mach-omap2/mailbox.c +++ b/arch/arm/mach-omap2/mailbox.c @@ -193,10 +193,12 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox, omap_mbox_type_t irq) { struct omap_mbox2_priv *p = mbox->priv; - u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; - l = mbox_read_reg(p->irqdisable); - l &= ~bit; - mbox_write_reg(l, p->irqdisable); + u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit; + + if (!cpu_is_omap44xx()) + bit = mbox_read_reg(p->irqdisable) & ~bit; + + mbox_write_reg(bit, p->irqdisable); } static void omap2_mbox_ack_irq(struct omap_mbox *mbox, @@ -334,7 +336,7 @@ static struct omap_mbox mbox_iva_info = { .priv = &omap2_mbox_iva_priv, }; -struct omap_mbox *omap2_mboxes[] = { &mbox_iva_info, &mbox_dsp_info, NULL }; +struct omap_mbox *omap2_mboxes[] = { &mbox_dsp_info, &mbox_iva_info, NULL }; #endif #if defined(CONFIG_ARCH_OMAP4) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 17bd6394d224..6c84659cf846 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -160,7 +160,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, struct omap_mux *mux = NULL; struct omap_mux_entry *e; const char *mode_name; - int found = 0, found_mode, mode0_len = 0; + int found = 0, found_mode = 0, mode0_len = 0; struct list_head *muxmodes = &partition->muxmodes; mode_name = strchr(muxname, '.'); @@ -605,7 +605,7 @@ static void __init omap_mux_dbg_create_entry( list_for_each_entry(e, &partition->muxmodes, node) { struct omap_mux *m = &e->mux; - (void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir, + (void)debugfs_create_file(m->muxnames[0], S_IWUSR, mux_dbg_dir, m, &omap_mux_dbg_signal_fops); } } @@ -893,7 +893,7 @@ static struct omap_mux * __init omap_mux_list_add( return NULL; m = &entry->mux; - memcpy(m, src, sizeof(struct omap_mux_entry)); + entry->mux = *src; #ifdef CONFIG_OMAP_MUX if (omap_mux_copy_names(src, m)) { @@ -1000,6 +1000,7 @@ int __init omap_mux_init(const char *name, u32 flags, if (!partition->base) { pr_err("%s: Could not ioremap mux partition at 0x%08x\n", __func__, partition->phys); + kfree(partition); return -ENODEV; } diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index 440c98e9a510..17f80e4ab162 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -703,7 +703,7 @@ static struct omap_mux __initdata omap3_muxmodes[] = { * Signals different on CBC package compared to the superset */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC) -struct omap_mux __initdata omap3_cbc_subset[] = { +static struct omap_mux __initdata omap3_cbc_subset[] = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else @@ -721,7 +721,7 @@ struct omap_mux __initdata omap3_cbc_subset[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBC) -struct omap_ball __initdata omap3_cbc_ball[] = { +static struct omap_ball __initdata omap3_cbc_ball[] = { _OMAP3_BALLENTRY(CAM_D0, "ae16", NULL), _OMAP3_BALLENTRY(CAM_D1, "ae15", NULL), _OMAP3_BALLENTRY(CAM_D10, "d25", NULL), diff --git a/arch/arm/mach-omap2/mux44xx.c b/arch/arm/mach-omap2/mux44xx.c index 980f11d45c79..c322e7bdaa17 100644 --- a/arch/arm/mach-omap2/mux44xx.c +++ b/arch/arm/mach-omap2/mux44xx.c @@ -544,7 +544,7 @@ static struct omap_mux __initdata omap4_core_muxmodes[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBL) -struct omap_ball __initdata omap4_core_cbl_ball[] = { +static struct omap_ball __initdata omap4_core_cbl_ball[] = { _OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL), _OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL), _OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL), @@ -1262,7 +1262,7 @@ static struct omap_mux __initdata omap4_es2_core_muxmodes[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBS) -struct omap_ball __initdata omap4_core_cbs_ball[] = { +static struct omap_ball __initdata omap4_core_cbs_ball[] = { _OMAP4_BALLENTRY(GPMC_AD0, "c12", NULL), _OMAP4_BALLENTRY(GPMC_AD1, "d12", NULL), _OMAP4_BALLENTRY(GPMC_AD2, "c13", NULL), @@ -1546,7 +1546,7 @@ static struct omap_mux __initdata omap4_wkup_muxmodes[] = { */ #if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS) \ && defined(CONFIG_OMAP_PACKAGE_CBL) -struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = { +static struct omap_ball __initdata omap4_wkup_cbl_cbs_ball[] = { _OMAP4_BALLENTRY(SIM_IO, "h4", NULL), _OMAP4_BALLENTRY(SIM_CLK, "j2", NULL), _OMAP4_BALLENTRY(SIM_RESET, "g2", NULL), diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 15f8c6c1bb0f..00e1d2b53683 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -20,6 +20,8 @@ #include <plat/voltage.h> +#include "pm.h" + #define OMAP3_SRI2C_SLAVE_ADDR 0x12 #define OMAP3_VDD_MPU_SR_CONTROL_REG 0x00 #define OMAP3_VDD_CORE_SR_CONTROL_REG 0x01 @@ -60,17 +62,17 @@ static u8 smps_offset; #define REG_SMPS_OFFSET 0xE0 -unsigned long twl4030_vsel_to_uv(const u8 vsel) +static unsigned long twl4030_vsel_to_uv(const u8 vsel) { return (((vsel * 125) + 6000)) * 100; } -u8 twl4030_uv_to_vsel(unsigned long uv) +static u8 twl4030_uv_to_vsel(unsigned long uv) { return DIV_ROUND_UP(uv - 600000, 12500); } -unsigned long twl6030_vsel_to_uv(const u8 vsel) +static unsigned long twl6030_vsel_to_uv(const u8 vsel) { /* * In TWL6030 depending on the value of SMPS_OFFSET @@ -102,7 +104,7 @@ unsigned long twl6030_vsel_to_uv(const u8 vsel) return ((((vsel - 1) * 125) + 6000)) * 100; } -u8 twl6030_uv_to_vsel(unsigned long uv) +static u8 twl6030_uv_to_vsel(unsigned long uv) { /* * In TWL6030 depending on the value of SMPS_OFFSET diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 125f56591fb5..a5a83b358ddd 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -637,14 +637,14 @@ static int __init pm_dbg_init(void) } - (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d, + (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d, &enable_off_mode, &pm_dbg_option_fops); - (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d, + (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d, &sleep_while_idle, &pm_dbg_option_fops); - (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d, + (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d, &wakeup_timer_seconds, &pm_dbg_option_fops); (void) debugfs_create_file("wakeup_timer_milliseconds", - S_IRUGO | S_IWUGO, d, &wakeup_timer_milliseconds, + S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds, &pm_dbg_option_fops); pm_dbg_init_done = 1; diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index dac2d1d9987d..97feb3ab6a69 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -134,7 +134,7 @@ static void omap2_enter_full_retention(void) /* Block console output in case it is on one of the OMAP UARTs */ if (!is_suspending()) - if (try_acquire_console_sem()) + if (!console_trylock()) goto no_sleep; omap_uart_prepare_idle(0); @@ -151,7 +151,7 @@ static void omap2_enter_full_retention(void) omap_uart_resume_idle(0); if (!is_suspending()) - release_console_sem(); + console_unlock(); no_sleep: if (omap2_pm_debug) { @@ -350,7 +350,7 @@ static void omap2_pm_end(void) enable_hlt(); } -static struct platform_suspend_ops omap_pm_ops = { +static const struct platform_suspend_ops omap_pm_ops = { .begin = omap2_pm_begin, .enter = omap2_pm_enter, .end = omap2_pm_end, diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 5b323f28da2d..2f864e4b085d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -168,9 +168,10 @@ static void omap3_core_restore_context(void) * once during boot sequence, but this works as we are not using secure * services. */ -static void omap3_save_secure_ram_context(u32 target_mpu_state) +static void omap3_save_secure_ram_context(void) { u32 ret; + int mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm); if (omap_type() != OMAP2_DEVICE_TYPE_GP) { /* @@ -181,7 +182,7 @@ static void omap3_save_secure_ram_context(u32 target_mpu_state) pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON); ret = _omap_save_secure_sram((u32 *) __pa(omap3_secure_ram_storage)); - pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state); + pwrdm_set_next_pwrst(mpu_pwrdm, mpu_next_state); /* Following is for error tracking, it should not happen */ if (ret) { printk(KERN_ERR "save_secure_sram() returns %08x\n", @@ -398,7 +399,7 @@ void omap_sram_idle(void) if (!is_suspending()) if (per_next_state < PWRDM_POWER_ON || core_next_state < PWRDM_POWER_ON) - if (try_acquire_console_sem()) + if (!console_trylock()) goto console_still_active; /* PER */ @@ -481,7 +482,7 @@ void omap_sram_idle(void) } if (!is_suspending()) - release_console_sem(); + console_unlock(); console_still_active: /* Disable IO-PAD and IO-CHAIN wakeup */ @@ -605,7 +606,7 @@ static void omap3_pm_end(void) return; } -static struct platform_suspend_ops omap_pm_ops = { +static const struct platform_suspend_ops omap_pm_ops = { .begin = omap3_pm_begin, .end = omap3_pm_end, .enter = omap3_pm_enter, @@ -1094,7 +1095,7 @@ static int __init omap3_pm_init(void) local_fiq_disable(); omap_dma_global_context_save(); - omap3_save_secure_ram_context(PWRDM_POWER_ON); + omap3_save_secure_ram_context(); omap_dma_global_context_restore(); local_irq_enable(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index e9f4862c4de4..76cfff2db514 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -65,7 +65,7 @@ static void omap4_pm_end(void) return; } -static struct platform_suspend_ops omap_pm_ops = { +static const struct platform_suspend_ops omap_pm_ops = { .begin = omap4_pm_begin, .end = omap4_pm_end, .enter = omap4_pm_enter, diff --git a/arch/arm/mach-omap2/pm_bus.c b/arch/arm/mach-omap2/pm_bus.c index 784989f8f2f5..5acd2ab298b1 100644 --- a/arch/arm/mach-omap2/pm_bus.c +++ b/arch/arm/mach-omap2/pm_bus.c @@ -20,7 +20,7 @@ #include <plat/omap-pm.h> #ifdef CONFIG_PM_RUNTIME -int omap_pm_runtime_suspend(struct device *dev) +static int omap_pm_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); int r, ret = 0; @@ -37,7 +37,7 @@ int omap_pm_runtime_suspend(struct device *dev) return ret; }; -int omap_pm_runtime_resume(struct device *dev) +static int omap_pm_runtime_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); int r; diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index d5233890370c..cf600e22bf8e 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -19,7 +19,6 @@ #include <plat/prcm.h> #include "powerdomain.h" -#include "prm-regbits-34xx.h" #include "prm.h" #include "prm-regbits-24xx.h" #include "prm-regbits-34xx.h" diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index 729a644ce852..3300ff6e3cfe 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -38,8 +38,8 @@ #define OMAP4430_PRCM_MPU_CPU1_INST 0x0800 /* PRCM_MPU clockdomain register offsets (from instance start) */ -#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0000 -#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0000 +#define OMAP4430_PRCM_MPU_CPU0_MPU_CDOFFS 0x0018 +#define OMAP4430_PRCM_MPU_CPU1_MPU_CDOFFS 0x0018 /* diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 53d44f6e3736..49654c8d18f5 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -228,7 +228,67 @@ #ifndef __ASSEMBLER__ - +/* + * Stub omap2xxx/omap3xxx functions so that common files + * continue to build when custom builds are used + */ +#if defined(CONFIG_ARCH_OMAP4) && !(defined(CONFIG_ARCH_OMAP2) || \ + defined(CONFIG_ARCH_OMAP3)) +static inline u32 omap2_prm_read_mod_reg(s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); +} +static inline u32 omap2_prm_rmw_mod_reg_bits(u32 mask, u32 bits, + s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline u32 omap2_prm_set_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline u32 omap2_prm_clear_mod_reg_bits(u32 bits, s16 module, s16 idx) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline u32 omap2_prm_read_mod_bits_shift(s16 domain, s16 idx, u32 mask) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +static inline int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift) +{ + WARN(1, "prm: omap2xxx/omap3xxx specific function and " + "not suppose to be used on omap4\n"); + return 0; +} +#else /* Power/reset management domain register get/set */ extern u32 omap2_prm_read_mod_reg(s16 module, u16 idx); extern void omap2_prm_write_mod_reg(u32 val, s16 module, u16 idx); @@ -242,6 +302,7 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 shift); +#endif /* CONFIG_ARCH_OMAP4 */ #endif /* diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index c64578853a8d..32e91a9c8b6b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -812,7 +812,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) oh->dev_attr = uart; - acquire_console_sem(); /* in case the earlycon is on the UART */ + console_lock(); /* in case the earlycon is on the UART */ /* * Because of early UART probing, UART did not get idled @@ -838,7 +838,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) omap_uart_block_sleep(uart); uart->timeout = DEFAULT_TIMEOUT; - release_console_sem(); + console_unlock(); if ((cpu_is_omap34xx() && uart->padconf) || (uart->wk_en && uart->wk_mask)) { @@ -852,7 +852,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) } /** - * omap_serial_init() - intialize all supported serial ports + * omap_serial_init() - initialize all supported serial ports * * Initializes all available UARTs as serial ports. Platforms * can call this function when they want to have default behaviour diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 77ecebf3fae2..1a777e34d0c2 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -282,6 +282,7 @@ error: dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" "interrupt handler. Smartreflex will" "not function as desired\n", __func__); + kfree(name); kfree(sr_info); return ret; } @@ -780,8 +781,7 @@ static int omap_sr_autocomp_show(void *data, u64 *val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -795,8 +795,7 @@ static int omap_sr_autocomp_store(void *data, u64 val) struct omap_sr *sr_info = (struct omap_sr *) data; if (!sr_info) { - pr_warning("%s: omap_sr struct for sr_%s not found\n", - __func__, sr_info->voltdm->name); + pr_warning("%s: omap_sr struct not found\n", __func__); return -EINVAL; } @@ -834,7 +833,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (!pdata) { dev_err(&pdev->dev, "%s: platform data missing\n", __func__); - return -EINVAL; + ret = -EINVAL; + goto err_free_devinfo; } mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -880,7 +880,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - return ret; + goto err_release_region; } } @@ -891,17 +891,20 @@ static int __init omap_sr_probe(struct platform_device *pdev) * not try to create rest of the debugfs entries. */ vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm); - if (!vdd_dbg_dir) - return -EINVAL; + if (!vdd_dbg_dir) { + ret = -EINVAL; + goto err_release_region; + } dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir); if (IS_ERR(dbg_dir)) { dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); - return PTR_ERR(dbg_dir); + ret = PTR_ERR(dbg_dir); + goto err_release_region; } - (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUGO, dbg_dir, + (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, dbg_dir, (void *)sr_info, &pm_sr_fops); (void) debugfs_create_x32("errweight", S_IRUGO, dbg_dir, &sr_info->err_weight); @@ -914,7 +917,8 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (IS_ERR(nvalue_dir)) { dev_err(&pdev->dev, "%s: Unable to create debugfs directory" "for n-values\n", __func__); - return PTR_ERR(nvalue_dir); + ret = PTR_ERR(nvalue_dir); + goto err_release_region; } omap_voltage_get_volttable(sr_info->voltdm, &volt_data); @@ -923,24 +927,16 @@ static int __init omap_sr_probe(struct platform_device *pdev) " corresponding vdd vdd_%s. Cannot create debugfs" "entries for n-values\n", __func__, sr_info->voltdm->name); - return -ENODATA; + ret = -ENODATA; + goto err_release_region; } for (i = 0; i < sr_info->nvalue_count; i++) { - char *name; - char volt_name[32]; - - name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL); - if (!name) { - dev_err(&pdev->dev, "%s: Unable to allocate memory" - " for n-value directory name\n", __func__); - return -ENOMEM; - } + char name[NVALUE_NAME_LEN + 1]; - strcpy(name, "volt_"); - sprintf(volt_name, "%d", volt_data[i].volt_nominal); - strcat(name, volt_name); - (void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir, + snprintf(name, sizeof(name), "volt_%d", + volt_data[i].volt_nominal); + (void) debugfs_create_x32(name, S_IRUGO | S_IWUSR, nvalue_dir, &(sr_info->nvalue_table[i].nvalue)); } @@ -966,7 +962,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev) } sr_info = _sr_lookup(pdata->voltdm); - if (!sr_info) { + if (IS_ERR(sr_info)) { dev_warn(&pdev->dev, "%s: omap_sr struct not found\n", __func__); return -EINVAL; diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 786d685c09a9..b1e0af18a26a 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -27,6 +27,7 @@ #include <plat/voltage.h> #include "control.h" +#include "pm.h" static bool sr_enable_on_init; diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c index 4e48e786bec7..0fc550e7e482 100644 --- a/arch/arm/mach-omap2/timer-gp.c +++ b/arch/arm/mach-omap2/timer-gp.c @@ -39,9 +39,12 @@ #include <asm/mach/time.h> #include <plat/dmtimer.h> #include <asm/localtimer.h> +#include <asm/sched_clock.h> #include "timer-gp.h" +#include <plat/common.h> + /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ #define MAX_GPTIMER_ID 12 @@ -176,14 +179,19 @@ static void __init omap2_gp_clockevent_init(void) /* * When 32k-timer is enabled, don't use GPTimer for clocksource * instead, just leave default clocksource which uses the 32k - * sync counter. See clocksource setup in see plat-omap/common.c. + * sync counter. See clocksource setup in plat-omap/counter_32k.c */ -static inline void __init omap2_gp_clocksource_init(void) {} +static void __init omap2_gp_clocksource_init(void) +{ + omap_init_clocksource_32k(); +} + #else /* * clocksource */ +static DEFINE_CLOCK_DATA(cd); static struct omap_dm_timer *gpt_clocksource; static cycle_t clocksource_read_cycles(struct clocksource *cs) { @@ -198,6 +206,15 @@ static struct clocksource clocksource_gpt = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static void notrace dmtimer_update_sched_clock(void) +{ + u32 cyc; + + cyc = omap_dm_timer_read_counter(gpt_clocksource); + + update_sched_clock(&cd, cyc, (u32)~0); +} + /* Setup free-running counter for clocksource */ static void __init omap2_gp_clocksource_init(void) { @@ -218,6 +235,8 @@ static void __init omap2_gp_clocksource_init(void) omap_dm_timer_set_load_start(gpt, 1, 0); + init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate); + if (clocksource_register_hz(&clocksource_gpt, tick_rate)) printk(err2, clocksource_gpt.name); } diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index ed6079c94c57..12be525b8df4 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -471,6 +471,7 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) strcat(name, vdd->voltdm.name); vdd->debug_dir = debugfs_create_dir(name, voltage_dir); + kfree(name); if (IS_ERR(vdd->debug_dir)) { pr_warning("%s: Unable to create debugfs directory for" " vdd_%s\n", __func__, vdd->voltdm.name); diff --git a/arch/arm/mach-omap2/wd_timer.c b/arch/arm/mach-omap2/wd_timer.c index b0c4907ab3ca..4067669d96c4 100644 --- a/arch/arm/mach-omap2/wd_timer.c +++ b/arch/arm/mach-omap2/wd_timer.c @@ -13,6 +13,8 @@ #include <plat/omap_hwmod.h> +#include "wd_timer.h" + /* * In order to avoid any assumptions from bootloader regarding WDT * settings, WDT module is reset during init. This enables the watchdog |