diff options
Diffstat (limited to 'arch/arm/mach-pxa')
134 files changed, 2262 insertions, 2392 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f7520a6cc7d4..b90d98bae68d 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -1,4 +1,19 @@ # SPDX-License-Identifier: GPL-2.0-only +menuconfig ARCH_PXA + bool "PXA2xx/PXA3xx-based" + depends on ARCH_MULTI_V5 + depends on CPU_LITTLE_ENDIAN + select ARM_CPU_SUSPEND if PM + select CLKSRC_PXA + select CLKSRC_MMIO + select TIMER_OF + select CPU_XSCALE if !CPU_XSC3 + select GPIO_PXA + select GPIOLIB + select PLAT_PXA + help + Support for Intel/Marvell's PXA2xx/PXA3xx processor line. + if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" @@ -39,14 +54,18 @@ config MACH_PXA3XX_DT the device tree. Needn't select any other machine while MACH_PXA3XX_DT is enabled. +if ATAGS + config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform (aka Lubbock)" + depends on UNUSED_BOARD_FILES select GPIO_REG select PXA25x select SA1111 config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)" + depends on UNUSED_BOARD_FILES select GPIO_REG select PXA27x @@ -56,23 +75,27 @@ config MACH_ZYLONITE config MACH_ZYLONITE300 bool "PXA3xx Development Platform (aka Zylonite) PXA300/310" + depends on UNUSED_BOARD_FILES select CPU_PXA300 select CPU_PXA310 select MACH_ZYLONITE config MACH_ZYLONITE320 bool "PXA3xx Development Platform (aka Zylonite) PXA320" + depends on UNUSED_BOARD_FILES select CPU_PXA320 select MACH_ZYLONITE config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" + depends on UNUSED_BOARD_FILES select CPU_PXA300 select CPU_PXA310 select PXA3xx config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" + depends on UNUSED_BOARD_FILES select CPU_PXA930 select CPU_PXA935 select PXA3xx @@ -81,6 +104,7 @@ config MACH_TAVOREVB config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" + depends on UNUSED_BOARD_FILES select CPU_PXA930 select CPU_PXA935 select PXA3xx @@ -91,10 +115,12 @@ comment "Third Party Dev Platforms (sorted by vendor name)" config ARCH_PXA_IDP bool "Accelent Xscale IDP" + depends on UNUSED_BOARD_FILES select PXA25x config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" + depends on UNUSED_BOARD_FILES select ARCOM_PCMCIA select I2C_GPIO if I2C=y select ISA @@ -102,17 +128,20 @@ config ARCH_VIPER config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" + depends on UNUSED_BOARD_FILES select ARCOM_PCMCIA select ISA select PXA27x config MACH_BALLOON3 bool "Balloon 3 board" + depends on UNUSED_BOARD_FILES select IWMMXT select PXA27x config MACH_CSB726 bool "Enable Cogent CSB726 System On a Module" + depends on UNUSED_BOARD_FILES select IWMMXT select PXA27x help @@ -121,16 +150,19 @@ config MACH_CSB726 config CSB726_CSB701 bool "Enable support for CSB701 baseboard" + depends on UNUSED_BOARD_FILES depends on MACH_CSB726 config MACH_CM_X300 bool "CompuLab CM-X300 modules" + depends on UNUSED_BOARD_FILES select CPU_PXA300 select CPU_PXA310 select PXA3xx config MACH_CAPC7117 bool "Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM" + depends on UNUSED_BOARD_FILES select CPU_PXA320 select PXA3xx @@ -153,18 +185,9 @@ config GUMSTIX_AM300EPD endchoice -config MACH_INTELMOTE2 - bool "Intel Mote 2 Platform" - select IWMMXT - select PXA27x - -config MACH_STARGATE2 - bool "Intel Stargate 2 Platform" - select IWMMXT - select PXA27x - config MACH_XCEP bool "Iskratel Electronics XCEP" + depends on UNUSED_BOARD_FILES select MTD select MTD_CFI select MTD_CFI_INTELEXT @@ -176,6 +199,7 @@ config MACH_XCEP config TRIZEPS_PXA bool "PXA based Keith und Koep Trizeps DIMM-Modules" + depends on UNUSED_BOARD_FILES config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" @@ -217,15 +241,18 @@ config TRIZEPS_PCMCIA config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" + depends on UNUSED_BOARD_FILES select PXA27x config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" + depends on UNUSED_BOARD_FILES select IWMMXT select PXA27x config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" + depends on UNUSED_BOARD_FILES depends on MACH_PCM027 choice @@ -245,30 +272,36 @@ endchoice config MACH_COLIBRI bool "Toradex Colibri PXA270" + depends on UNUSED_BOARD_FILES select PXA27x config MACH_COLIBRI_PXA270_INCOME bool "Income s.r.o. PXA270 SBC" + depends on UNUSED_BOARD_FILES depends on MACH_COLIBRI select PXA27x config MACH_COLIBRI300 bool "Toradex Colibri PXA300/310" + depends on UNUSED_BOARD_FILES select CPU_PXA300 select CPU_PXA310 select PXA3xx config MACH_COLIBRI320 bool "Toradex Colibri PXA320" + depends on UNUSED_BOARD_FILES select CPU_PXA320 select PXA3xx config MACH_COLIBRI_EVALBOARD bool "Toradex Colibri Evaluation Carrier Board support" + depends on UNUSED_BOARD_FILES depends on MACH_COLIBRI || MACH_COLIBRI300 || MACH_COLIBRI320 config MACH_VPAC270 bool "Voipac PXA270" + depends on UNUSED_BOARD_FILES select HAVE_PATA_PLATFORM select PXA27x help @@ -278,24 +311,29 @@ comment "End-user Products (sorted by vendor name)" config MACH_H4700 bool "HP iPAQ hx4700" + depends on UNUSED_BOARD_FILES select IWMMXT select PXA27x config MACH_H5000 bool "HP iPAQ h5000" + depends on UNUSED_BOARD_FILES select PXA25x config MACH_HIMALAYA bool "HTC Himalaya Support" + depends on UNUSED_BOARD_FILES select CPU_PXA26x config MACH_MAGICIAN bool "Enable HTC Magician Support" + depends on UNUSED_BOARD_FILES select IWMMXT select PXA27x config MACH_MIOA701 bool "Mitac Mio A701 Support" + depends on UNUSED_BOARD_FILES select IWMMXT select PXA27x help @@ -305,6 +343,7 @@ config MACH_MIOA701 config PXA_EZX bool "Motorola EZX Platform" + depends on UNUSED_BOARD_FILES select IWMMXT select PXA27x @@ -340,16 +379,19 @@ config MACH_EZX_E2 config MACH_MP900C bool "Nec Mobilepro 900/c" + depends on UNUSED_BOARD_FILES select PXA25x config ARCH_PXA_PALM bool "PXA based Palm PDAs" + depends on UNUSED_BOARD_FILES config MACH_PALM27X bool config MACH_PALMTE2 bool "Palm Tungsten|E2" + depends on UNUSED_BOARD_FILES default y depends on ARCH_PXA_PALM select PXA25x @@ -368,6 +410,7 @@ config MACH_PALMTC config MACH_PALMT5 bool "Palm Tungsten|T5" + depends on UNUSED_BOARD_FILES default y depends on ARCH_PXA_PALM select IWMMXT @@ -379,6 +422,7 @@ config MACH_PALMT5 config MACH_PALMTX bool "Palm T|X" + depends on UNUSED_BOARD_FILES default y depends on ARCH_PXA_PALM select IWMMXT @@ -390,6 +434,7 @@ config MACH_PALMTX config MACH_PALMZ72 bool "Palm Zire 72" + depends on UNUSED_BOARD_FILES default y depends on ARCH_PXA_PALM select IWMMXT @@ -401,6 +446,7 @@ config MACH_PALMZ72 config MACH_PALMLD bool "Palm LifeDrive" + depends on UNUSED_BOARD_FILES default y depends on ARCH_PXA_PALM select IWMMXT @@ -416,6 +462,7 @@ config PALM_TREO config MACH_CENTRO bool "Palm Centro 685 (GSM)" + depends on UNUSED_BOARD_FILES default y depends on ARCH_PXA_PALM select IWMMXT @@ -428,6 +475,7 @@ config MACH_CENTRO config MACH_TREO680 bool "Palm Treo 680" + depends on UNUSED_BOARD_FILES default y depends on ARCH_PXA_PALM select IWMMXT @@ -460,24 +508,28 @@ config PXA_SHARPSL_DETECT_MACH_ID config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL + depends on UNUSED_BOARD_FILES select PXA25x select SHARP_LOCOMO config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends on PXA_SHARPSL + depends on UNUSED_BOARD_FILES select PXA25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" depends on PXA_SHARPSL + depends on UNUSED_BOARD_FILES select PXA25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" depends on PXA_SHARPSL + depends on UNUSED_BOARD_FILES select PXA25x select PXA_SHARP_C7xx @@ -504,6 +556,7 @@ config MACH_BORZOI config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" + depends on UNUSED_BOARD_FILES depends on PXA_SHARPSL select PXA25x @@ -527,11 +580,13 @@ config TOSA_USE_EXT_KEYCODES config MACH_ICONTROL bool "TMT iControl/SafeTCam based on the MXM-8x10 CoM" + depends on UNUSED_BOARD_FILES select CPU_PXA320 select PXA3xx config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" + depends on UNUSED_BOARD_FILES select FB_W100 select FB select PXA25x @@ -586,7 +641,10 @@ config MACH_E800 config MACH_ZIPIT2 bool "Zipit Z2 Handheld" + depends on UNUSED_BOARD_FILES select PXA27x + +endif # ATAGS endmenu config PXA25x diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 177abe584dd5..0aec36e67dc1 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -37,7 +37,8 @@ obj-$(CONFIG_MACH_SAAR) += saar.o obj-$(CONFIG_ARCH_PXA_IDP) += idp.o obj-$(CONFIG_ARCH_VIPER) += viper.o obj-$(CONFIG_MACH_ARCOM_ZEUS) += zeus.o -obj-$(CONFIG_MACH_BALLOON3) += balloon3.o +obj-$(CONFIG_ARCOM_PCMCIA) += viper-pcmcia.o +obj-$(CONFIG_MACH_BALLOON3) += balloon3.o balloon3-pcmcia.o obj-$(CONFIG_MACH_CSB726) += csb726.o obj-$(CONFIG_CSB726_CSB701) += csb701.o obj-$(CONFIG_MACH_CM_X300) += cm-x300.o @@ -45,22 +46,22 @@ obj-$(CONFIG_MACH_CAPC7117) += capc7117.o mxm8x10.o obj-$(CONFIG_ARCH_GUMSTIX) += gumstix.o obj-$(CONFIG_GUMSTIX_AM200EPD) += am200epd.o obj-$(CONFIG_GUMSTIX_AM300EPD) += am300epd.o -obj-$(CONFIG_MACH_INTELMOTE2) += stargate2.o -obj-$(CONFIG_MACH_STARGATE2) += stargate2.o obj-$(CONFIG_MACH_XCEP) += xcep.o obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o +obj-$(CONFIG_TRIZEPS_PCMCIA) += trizeps4-pcmcia.o obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o -obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o +obj-$(CONFIG_MACH_COLIBRI) += colibri-pxa270.o colibri-pcmcia.o obj-$(CONFIG_MACH_COLIBRI_EVALBOARD) += colibri-evalboard.o obj-$(CONFIG_MACH_COLIBRI_PXA270_INCOME) += colibri-pxa270-income.o obj-$(CONFIG_MACH_COLIBRI300) += colibri-pxa3xx.o colibri-pxa300.o -obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o -obj-$(CONFIG_MACH_VPAC270) += vpac270.o +obj-$(CONFIG_MACH_COLIBRI320) += colibri-pxa3xx.o colibri-pxa320.o colibri-pcmcia.o +obj-$(CONFIG_MACH_VPAC270) += vpac270.o vpac270-pcmcia.o # End-user Products obj-$(CONFIG_MACH_H4700) += hx4700.o +obj-$(CONFIG_MACH_H4700) += hx4700-pcmcia.o obj-$(CONFIG_MACH_H5000) += h5000.o obj-$(CONFIG_MACH_HIMALAYA) += himalaya.o obj-$(CONFIG_MACH_MAGICIAN) += magician.o @@ -68,12 +69,12 @@ obj-$(CONFIG_MACH_MIOA701) += mioa701.o mioa701_bootresume.o obj-$(CONFIG_PXA_EZX) += ezx.o obj-$(CONFIG_MACH_MP900C) += mp900.o obj-$(CONFIG_MACH_PALMTE2) += palmte2.o -obj-$(CONFIG_MACH_PALMTC) += palmtc.o +obj-$(CONFIG_MACH_PALMTC) += palmtc.o palmtc-pcmcia.o obj-$(CONFIG_MACH_PALM27X) += palm27x.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o -obj-$(CONFIG_MACH_PALMTX) += palmtx.o +obj-$(CONFIG_MACH_PALMTX) += palmtx.o palmtx-pcmcia.o obj-$(CONFIG_MACH_PALMZ72) += palmz72.o -obj-$(CONFIG_MACH_PALMLD) += palmld.o +obj-$(CONFIG_MACH_PALMLD) += palmld.o palmld-pcmcia.o obj-$(CONFIG_PALM_TREO) += palmtreo.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o @@ -81,6 +82,7 @@ obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_TOSA) += tosa.o obj-$(CONFIG_MACH_ICONTROL) += icontrol.o mxm8x10.o obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o +obj-$(CONFIG_MACH_E740) += e740-pcmcia.o obj-$(CONFIG_MACH_ZIPIT2) += z2.o obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o diff --git a/arch/arm/mach-pxa/Makefile.boot b/arch/arm/mach-pxa/Makefile.boot deleted file mode 100644 index bb6e353ecf06..000000000000 --- a/arch/arm/mach-pxa/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only - zreladdr-y += 0xa0008000 - diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/addr-map.h index 93cfe7dbfec6..93cfe7dbfec6 100644 --- a/arch/arm/mach-pxa/include/mach/addr-map.h +++ b/arch/arm/mach-pxa/addr-map.h diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c index 17d08abeeb17..4b55bc89db8f 100644 --- a/arch/arm/mach-pxa/am300epd.c +++ b/arch/arm/mach-pxa/am300epd.c @@ -30,7 +30,7 @@ #include "gumstix.h" #include "mfp-pxa25x.h" -#include <mach/irqs.h> +#include "irqs.h" #include <linux/platform_data/video-pxafb.h> #include "generic.h" diff --git a/arch/arm/mach-pxa/balloon3-pcmcia.c b/arch/arm/mach-pxa/balloon3-pcmcia.c new file mode 100644 index 000000000000..6a27b76cc603 --- /dev/null +++ b/arch/arm/mach-pxa/balloon3-pcmcia.c @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_balloon3.c + * + * Balloon3 PCMCIA specific routines. + * + * Author: Nick Bane + * Created: June, 2006 + * Copyright: Toby Churchill Ltd + * Derived from pxa2xx_mainstone.c, by Nico Pitre + * + * Various modification by Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/gpio.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include "balloon3.h" + +#include <asm/mach-types.h> + +#include <pcmcia/soc_common.h> + +static int balloon3_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + uint16_t ver; + + ver = __raw_readw(BALLOON3_FPGA_VER); + if (ver < 0x4f08) + pr_warn("The FPGA code, version 0x%04x, is too old. " + "PCMCIA/CF support might be broken in this version!", + ver); + + skt->socket.pci_irq = BALLOON3_BP_CF_NRDY_IRQ; + skt->stat[SOC_STAT_CD].gpio = BALLOON3_GPIO_S0_CD; + skt->stat[SOC_STAT_CD].name = "PCMCIA0 CD"; + skt->stat[SOC_STAT_BVD1].irq = BALLOON3_BP_NSTSCHG_IRQ; + skt->stat[SOC_STAT_BVD1].name = "PCMCIA0 STSCHG"; + + return 0; +} + +static unsigned long balloon3_pcmcia_status[2] = { + BALLOON3_CF_nSTSCHG_BVD1, + BALLOON3_CF_nSTSCHG_BVD1 +}; + +static void balloon3_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + uint16_t status; + int flip; + + /* This actually reads the STATUS register */ + status = __raw_readw(BALLOON3_CF_STATUS_REG); + flip = (status ^ balloon3_pcmcia_status[skt->nr]) + & BALLOON3_CF_nSTSCHG_BVD1; + /* + * Workaround for STSCHG which can't be deasserted: + * We therefore disable/enable corresponding IRQs + * as needed to avoid IRQ locks. + */ + if (flip) { + balloon3_pcmcia_status[skt->nr] = status; + if (status & BALLOON3_CF_nSTSCHG_BVD1) + enable_irq(BALLOON3_BP_NSTSCHG_IRQ); + else + disable_irq(BALLOON3_BP_NSTSCHG_IRQ); + } + + state->ready = !!(status & BALLOON3_CF_nIRQ); + state->bvd1 = !!(status & BALLOON3_CF_nSTSCHG_BVD1); + state->bvd2 = 0; /* not available */ + state->vs_3v = 1; /* Always true its a CF card */ + state->vs_Xv = 0; /* not available */ +} + +static int balloon3_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + __raw_writew(BALLOON3_CF_RESET, BALLOON3_CF_CONTROL_REG + + ((state->flags & SS_RESET) ? + BALLOON3_FPGA_SETnCLR : 0)); + return 0; +} + +static struct pcmcia_low_level balloon3_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = balloon3_pcmcia_hw_init, + .socket_state = balloon3_pcmcia_socket_state, + .configure_socket = balloon3_pcmcia_configure_socket, + .first = 0, + .nr = 1, +}; + +static struct platform_device *balloon3_pcmcia_device; + +static int __init balloon3_pcmcia_init(void) +{ + int ret; + + if (!machine_is_balloon3()) + return -ENODEV; + + balloon3_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!balloon3_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(balloon3_pcmcia_device, + &balloon3_pcmcia_ops, sizeof(balloon3_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(balloon3_pcmcia_device); + + if (ret) + platform_device_put(balloon3_pcmcia_device); + + return ret; +} + +static void __exit balloon3_pcmcia_exit(void) +{ + platform_device_unregister(balloon3_pcmcia_device); +} + +module_init(balloon3_pcmcia_init); +module_exit(balloon3_pcmcia_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Nick Bane <nick@cecomputing.co.uk>"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_DESCRIPTION("Balloon3 board CF/PCMCIA driver"); diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 26140249c784..896d47d9a8dc 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -40,8 +40,8 @@ #include <asm/mach/flash.h> #include "pxa27x.h" -#include <mach/balloon3.h> -#include <mach/audio.h> +#include "balloon3.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/balloon3.h index 04f3639c4082..04f3639c4082 100644 --- a/arch/arm/mach-pxa/include/mach/balloon3.h +++ b/arch/arm/mach-pxa/balloon3.h diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index 2e35354b61f5..01f364a66446 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -40,6 +40,8 @@ #include <linux/spi/spi_gpio.h> #include <linux/spi/tdo24m.h> +#include <linux/soc/pxa/cpu.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/setup.h> @@ -51,7 +53,7 @@ #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/usb-pxa3xx-ulpi.h> #include <asm/mach/map.h> @@ -354,13 +356,13 @@ static struct platform_device cm_x300_spi_gpio = { static struct gpiod_lookup_table cm_x300_spi_gpiod_table = { .dev_id = "spi_gpio", .table = { - GPIO_LOOKUP("gpio-pxa", GPIO_LCD_SCL, + GPIO_LOOKUP("pca9555.1", GPIO_LCD_SCL - GPIO_LCD_BASE, "sck", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DIN, + GPIO_LOOKUP("pca9555.1", GPIO_LCD_DIN - GPIO_LCD_BASE, "mosi", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_LCD_DOUT, + GPIO_LOOKUP("pca9555.1", GPIO_LCD_DOUT - GPIO_LCD_BASE, "miso", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", GPIO_LCD_CS, + GPIO_LOOKUP("pca9555.1", GPIO_LCD_CS - GPIO_LCD_BASE, "cs", GPIO_ACTIVE_HIGH), { }, }, diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c index b9c173ede891..b62af07b8f96 100644 --- a/arch/arm/mach-pxa/colibri-evalboard.c +++ b/arch/arm/mach-pxa/colibri-evalboard.c @@ -13,7 +13,6 @@ #include <linux/interrupt.h> #include <linux/gpio/machine.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/mach/arch.h> #include <linux/i2c.h> #include <linux/platform_data/i2c-pxa.h> diff --git a/arch/arm/mach-pxa/colibri-pcmcia.c b/arch/arm/mach-pxa/colibri-pcmcia.c new file mode 100644 index 000000000000..9da7b478e5eb --- /dev/null +++ b/arch/arm/mach-pxa/colibri-pcmcia.c @@ -0,0 +1,165 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_colibri.c + * + * Driver for Toradex Colibri PXA270 CF socket + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> + +#include <pcmcia/soc_common.h> + +#define COLIBRI270_RESET_GPIO 53 +#define COLIBRI270_PPEN_GPIO 107 +#define COLIBRI270_BVD1_GPIO 83 +#define COLIBRI270_BVD2_GPIO 82 +#define COLIBRI270_DETECT_GPIO 84 +#define COLIBRI270_READY_GPIO 1 + +#define COLIBRI320_RESET_GPIO 77 +#define COLIBRI320_PPEN_GPIO 57 +#define COLIBRI320_BVD1_GPIO 53 +#define COLIBRI320_BVD2_GPIO 79 +#define COLIBRI320_DETECT_GPIO 81 +#define COLIBRI320_READY_GPIO 29 + +enum { + DETECT = 0, + READY = 1, + BVD1 = 2, + BVD2 = 3, + PPEN = 4, + RESET = 5, +}; + +/* Contents of this array are configured on-the-fly in init function */ +static struct gpio colibri_pcmcia_gpios[] = { + { 0, GPIOF_IN, "PCMCIA Detect" }, + { 0, GPIOF_IN, "PCMCIA Ready" }, + { 0, GPIOF_IN, "PCMCIA BVD1" }, + { 0, GPIOF_IN, "PCMCIA BVD2" }, + { 0, GPIOF_INIT_LOW, "PCMCIA PPEN" }, + { 0, GPIOF_INIT_HIGH,"PCMCIA Reset" }, +}; + +static int colibri_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(colibri_pcmcia_gpios, + ARRAY_SIZE(colibri_pcmcia_gpios)); + if (ret) + goto err1; + + skt->socket.pci_irq = gpio_to_irq(colibri_pcmcia_gpios[READY].gpio); + skt->stat[SOC_STAT_CD].irq = gpio_to_irq(colibri_pcmcia_gpios[DETECT].gpio); + skt->stat[SOC_STAT_CD].name = "PCMCIA CD"; + +err1: + return ret; +} + +static void colibri_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(colibri_pcmcia_gpios, + ARRAY_SIZE(colibri_pcmcia_gpios)); +} + +static void colibri_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + + state->detect = !!gpio_get_value(colibri_pcmcia_gpios[DETECT].gpio); + state->ready = !!gpio_get_value(colibri_pcmcia_gpios[READY].gpio); + state->bvd1 = !!gpio_get_value(colibri_pcmcia_gpios[BVD1].gpio); + state->bvd2 = !!gpio_get_value(colibri_pcmcia_gpios[BVD2].gpio); + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int +colibri_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + gpio_set_value(colibri_pcmcia_gpios[PPEN].gpio, + !(state->Vcc == 33 && state->Vpp < 50)); + gpio_set_value(colibri_pcmcia_gpios[RESET].gpio, + state->flags & SS_RESET); + return 0; +} + +static struct pcmcia_low_level colibri_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 1, + + .hw_init = colibri_pcmcia_hw_init, + .hw_shutdown = colibri_pcmcia_hw_shutdown, + + .socket_state = colibri_pcmcia_socket_state, + .configure_socket = colibri_pcmcia_configure_socket, +}; + +static struct platform_device *colibri_pcmcia_device; + +static int __init colibri_pcmcia_init(void) +{ + int ret; + + if (!machine_is_colibri() && !machine_is_colibri320()) + return -ENODEV; + + colibri_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!colibri_pcmcia_device) + return -ENOMEM; + + /* Colibri PXA270 */ + if (machine_is_colibri()) { + colibri_pcmcia_gpios[RESET].gpio = COLIBRI270_RESET_GPIO; + colibri_pcmcia_gpios[PPEN].gpio = COLIBRI270_PPEN_GPIO; + colibri_pcmcia_gpios[BVD1].gpio = COLIBRI270_BVD1_GPIO; + colibri_pcmcia_gpios[BVD2].gpio = COLIBRI270_BVD2_GPIO; + colibri_pcmcia_gpios[DETECT].gpio = COLIBRI270_DETECT_GPIO; + colibri_pcmcia_gpios[READY].gpio = COLIBRI270_READY_GPIO; + /* Colibri PXA320 */ + } else if (machine_is_colibri320()) { + colibri_pcmcia_gpios[RESET].gpio = COLIBRI320_RESET_GPIO; + colibri_pcmcia_gpios[PPEN].gpio = COLIBRI320_PPEN_GPIO; + colibri_pcmcia_gpios[BVD1].gpio = COLIBRI320_BVD1_GPIO; + colibri_pcmcia_gpios[BVD2].gpio = COLIBRI320_BVD2_GPIO; + colibri_pcmcia_gpios[DETECT].gpio = COLIBRI320_DETECT_GPIO; + colibri_pcmcia_gpios[READY].gpio = COLIBRI320_READY_GPIO; + } + + ret = platform_device_add_data(colibri_pcmcia_device, + &colibri_pcmcia_ops, sizeof(colibri_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(colibri_pcmcia_device); + + if (ret) + platform_device_put(colibri_pcmcia_device); + + return ret; +} + +static void __exit colibri_pcmcia_exit(void) +{ + platform_device_unregister(colibri_pcmcia_device); +} + +module_init(colibri_pcmcia_init); +module_exit(colibri_pcmcia_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Toradex Colibri PXA270/PXA320"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/colibri-pxa270-income.c b/arch/arm/mach-pxa/colibri-pxa270-income.c index e5879e8b0682..f6eaf464ca83 100644 --- a/arch/arm/mach-pxa/colibri-pxa270-income.c +++ b/arch/arm/mach-pxa/colibri-pxa270-income.c @@ -25,7 +25,6 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pxa27x.h" diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 2f2cd2ae4187..5dc669752836 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -23,7 +23,7 @@ #include <asm/mach-types.h> #include <linux/sizes.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "colibri.h" #include "pxa27x.h" diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 82052dfd96b6..11ca6c4795e7 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -13,6 +13,7 @@ #include <linux/platform_device.h> #include <linux/gpio.h> #include <linux/interrupt.h> +#include <linux/soc/pxa/cpu.h> #include <asm/mach-types.h> #include <linux/sizes.h> @@ -23,7 +24,7 @@ #include "colibri.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 35dd3adb7712..1a59056e181e 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -24,7 +24,7 @@ #include "colibri.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "pxa27x-udc.h" #include "udc.h" diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 3cead80a2b37..77d6ef5fa42d 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -13,12 +13,11 @@ #include <linux/gpio.h> #include <linux/etherdevice.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <linux/sizes.h> #include <asm/system_info.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> -#include <mach/pxa3xx-regs.h> +#include "pxa3xx-regs.h" #include "mfp-pxa300.h" #include "colibri.h" #include <linux/platform_data/mmc-pxamci.h> diff --git a/arch/arm/mach-pxa/colibri.h b/arch/arm/mach-pxa/colibri.h index 85525d49e321..01a46f36cc1f 100644 --- a/arch/arm/mach-pxa/colibri.h +++ b/arch/arm/mach-pxa/colibri.h @@ -3,7 +3,7 @@ #define _COLIBRI_H_ #include <net/ax88796.h> -#include <mach/mfp.h> +#include "mfp.h" /* * base board glue for PXA270 module diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 593c7f793da5..5738496717e2 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -39,7 +39,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -50,7 +49,7 @@ #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" -#include <mach/corgi.h> +#include "corgi.h" #include "sharpsl_pm.h" #include <asm/mach/sharpsl_param.h> @@ -473,6 +472,25 @@ static struct platform_device corgiled_device = { }, }; +static struct gpiod_lookup_table corgi_audio_gpio_table = { + .dev_id = "corgi-audio", + .table = { + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_MUTE_L - CORGI_SCOOP_GPIO_BASE, + "mute-l", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_MUTE_R - CORGI_SCOOP_GPIO_BASE, + "mute-r", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_APM_ON - CORGI_SCOOP_GPIO_BASE, + "apm-on", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop", + CORGI_GPIO_MIC_BIAS - CORGI_SCOOP_GPIO_BASE, + "mic-bias", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* * Corgi Audio */ @@ -530,6 +548,16 @@ static struct pxa2xx_spi_controller corgi_spi_info = { .num_chipselect = 3, }; +static struct gpiod_lookup_table corgi_spi_gpio_table = { + .dev_id = "spi1", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW), + { }, + }, +}; + static void corgi_wait_for_hsync(void) { while (gpio_get_value(CORGI_GPIO_HSYNC)) @@ -548,10 +576,6 @@ static struct ads7846_platform_data corgi_ads7846_info = { .wait_for_sync = corgi_wait_for_hsync, }; -static struct pxa2xx_spi_chip corgi_ads7846_chip = { - .gpio_cs = CORGI_GPIO_ADS7846_CS, -}; - static void corgi_bl_kick_battery(void) { void (*kick_batt)(void); @@ -580,14 +604,6 @@ static struct corgi_lcd_platform_data corgi_lcdcon_info = { .kick_battery = corgi_bl_kick_battery, }; -static struct pxa2xx_spi_chip corgi_lcdcon_chip = { - .gpio_cs = CORGI_GPIO_LCDCON_CS, -}; - -static struct pxa2xx_spi_chip corgi_max1111_chip = { - .gpio_cs = CORGI_GPIO_MAX1111_CS, -}; - static struct spi_board_info corgi_spi_devices[] = { { .modalias = "ads7846", @@ -595,7 +611,6 @@ static struct spi_board_info corgi_spi_devices[] = { .bus_num = 1, .chip_select = 0, .platform_data = &corgi_ads7846_info, - .controller_data= &corgi_ads7846_chip, .irq = PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT), }, { .modalias = "corgi-lcd", @@ -603,18 +618,17 @@ static struct spi_board_info corgi_spi_devices[] = { .bus_num = 1, .chip_select = 1, .platform_data = &corgi_lcdcon_info, - .controller_data= &corgi_lcdcon_chip, }, { .modalias = "max1111", .max_speed_hz = 450000, .bus_num = 1, .chip_select = 2, - .controller_data= &corgi_max1111_chip, }, }; static void __init corgi_init_spi(void) { + gpiod_add_lookup_table(&corgi_spi_gpio_table); pxa2xx_set_spi_info(1, &corgi_spi_info); gpiod_add_lookup_table(&corgi_lcdcon_gpio_table); spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices)); @@ -749,6 +763,7 @@ static void __init corgi_init(void) pxa_set_udc_info(&udc_info); gpiod_add_lookup_table(&corgi_mci_gpio_table); + gpiod_add_lookup_table(&corgi_audio_gpio_table); pxa_set_mci_info(&corgi_mci_platform_data); pxa_set_ficp_info(&corgi_ficp_platform_data); pxa_set_i2c_info(NULL); diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/corgi.h index b565ca7b8cda..b565ca7b8cda 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/corgi.h diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c index 092dcb9fced5..555a5c1afd96 100644 --- a/arch/arm/mach-pxa/corgi_pm.c +++ b/arch/arm/mach-pxa/corgi_pm.c @@ -19,10 +19,9 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/corgi.h> -#include <mach/pxa2xx-regs.h> +#include "corgi.h" +#include "pxa2xx-regs.h" #include "sharpsl_pm.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 98fcdc6e2944..410b1af87d55 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -17,12 +17,13 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> + #include "csb726.h" #include "pxa27x.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/audio.h> -#include <mach/smemc.h> +#include <linux/platform_data/asoc-pxa.h> +#include "smemc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/csb726.h b/arch/arm/mach-pxa/csb726.h index 30d7cf926b84..628928743bd5 100644 --- a/arch/arm/mach-pxa/csb726.h +++ b/arch/arm/mach-pxa/csb726.h @@ -7,7 +7,7 @@ #ifndef CSB726_H #define CSB726_H -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ #define CSB726_GPIO_IRQ_LAN 52 #define CSB726_GPIO_IRQ_SM501 53 diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 09b8495f3fd9..a7b92dd1ca9e 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -9,21 +9,23 @@ #include <linux/dmaengine.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/platform_data/i2c-pxa.h> +#include <linux/soc/pxa/cpu.h> #include "udc.h" #include <linux/platform_data/usb-pxa3xx-ulpi.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> -#include <mach/irqs.h> +#include "irqs.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/media/camera-pxa.h> -#include <mach/audio.h> -#include <mach/hardware.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmp_dma.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> +#include "regs-ost.h" +#include "reset.h" #include "devices.h" #include "generic.h" @@ -1118,3 +1120,12 @@ void __init pxa2xx_set_dmac_info(struct mmp_dma_platdata *dma_pdata) { pxa_register_device(&pxa2xx_pxa_dma, dma_pdata); } + +void __init pxa_register_wdt(unsigned int reset_status) +{ + struct resource res = DEFINE_RES_MEM(OST_PHYS, OST_LEN); + + reset_status &= RESET_STATUS_WATCHDOG; + platform_device_register_resndata(NULL, "sa1100_wdt", -1, &res, 1, + &reset_status, sizeof(reset_status)); +} diff --git a/arch/arm/mach-pxa/e740-pcmcia.c b/arch/arm/mach-pxa/e740-pcmcia.c new file mode 100644 index 000000000000..11a2c5d42920 --- /dev/null +++ b/arch/arm/mach-pxa/e740-pcmcia.c @@ -0,0 +1,127 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Toshiba e740 PCMCIA specific routines. + * + * (c) 2004 Ian Molton <spyro@f2s.com> + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include "eseries-gpio.h" + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <pcmcia/soc_common.h> + +static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + if (skt->nr == 0) { + skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD0; + skt->stat[SOC_STAT_CD].name = "CF card detect"; + skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY0; + skt->stat[SOC_STAT_RDY].name = "CF ready"; + } else { + skt->stat[SOC_STAT_CD].gpio = GPIO_E740_PCMCIA_CD1; + skt->stat[SOC_STAT_CD].name = "Wifi switch"; + skt->stat[SOC_STAT_RDY].gpio = GPIO_E740_PCMCIA_RDY1; + skt->stat[SOC_STAT_RDY].name = "Wifi ready"; + } + + return 0; +} + +static void e740_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int e740_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + if (state->flags & SS_RESET) { + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_RST0, 1); + else + gpio_set_value(GPIO_E740_PCMCIA_RST1, 1); + } else { + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_RST0, 0); + else + gpio_set_value(GPIO_E740_PCMCIA_RST1, 0); + } + + switch (state->Vcc) { + case 0: /* Socket off */ + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_PWR0, 0); + else + gpio_set_value(GPIO_E740_PCMCIA_PWR1, 1); + break; + case 50: + case 33: /* socket on */ + if (skt->nr == 0) + gpio_set_value(GPIO_E740_PCMCIA_PWR0, 1); + else + gpio_set_value(GPIO_E740_PCMCIA_PWR1, 0); + break; + default: + printk(KERN_ERR "e740_cs: Unsupported Vcc: %d\n", state->Vcc); + } + + return 0; +} + +static struct pcmcia_low_level e740_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = e740_pcmcia_hw_init, + .socket_state = e740_pcmcia_socket_state, + .configure_socket = e740_pcmcia_configure_socket, + .nr = 2, +}; + +static struct platform_device *e740_pcmcia_device; + +static int __init e740_pcmcia_init(void) +{ + int ret; + + if (!machine_is_e740()) + return -ENODEV; + + e740_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!e740_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(e740_pcmcia_device, &e740_pcmcia_ops, + sizeof(e740_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(e740_pcmcia_device); + + if (ret) + platform_device_put(e740_pcmcia_device); + + return ret; +} + +static void __exit e740_pcmcia_exit(void) +{ + platform_device_unregister(e740_pcmcia_device); +} + +module_init(e740_pcmcia_init); +module_exit(e740_pcmcia_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Ian Molton <spyro@f2s.com>"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_DESCRIPTION("e740 PCMCIA platform support"); diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/eseries-gpio.h index 5c645600d401..5c645600d401 100644 --- a/arch/arm/mach-pxa/include/mach/eseries-gpio.h +++ b/arch/arm/mach-pxa/eseries-gpio.h diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index f37c44b6139d..2e4daeab6278 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -1,13 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-only /* * Hardware definitions for the Toshiba eseries PDAs * * Copyright (c) 2003 Ian Molton <spyro@f2s.com> - * - * This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - * */ #include <linux/clkdev.h> @@ -24,6 +19,7 @@ #include <linux/mtd/rawnand.h> #include <linux/mtd/partitions.h> #include <linux/memblock.h> +#include <linux/gpio/machine.h> #include <video/w100fb.h> @@ -32,9 +28,9 @@ #include <asm/mach-types.h> #include "pxa25x.h" -#include <mach/eseries-gpio.h> +#include "eseries-gpio.h" #include "eseries-irq.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include "udc.h" #include <linux/platform_data/irda-pxaficp.h> @@ -85,11 +81,10 @@ int eseries_tmio_enable(struct platform_device *dev) return 0; } -int eseries_tmio_disable(struct platform_device *dev) +void eseries_tmio_disable(struct platform_device *dev) { gpio_set_value(GPIO_ESERIES_TMIO_SUSPEND, 0); gpio_set_value(GPIO_ESERIES_TMIO_PCLR, 0); - return 0; } int eseries_tmio_suspend(struct platform_device *dev) @@ -138,7 +133,6 @@ static void __init __maybe_unused eseries_register_clks(void) static struct tc6387xb_platform_data e330_tc6387xb_info = { .enable = &eseries_tmio_enable, - .disable = &eseries_tmio_disable, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, }; @@ -520,6 +514,16 @@ static struct platform_device e740_audio_device = { .id = -1, }; +static struct gpiod_lookup_table e740_audio_gpio_table = { + .dev_id = "e740-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E740_WM9705_nAVDD2, "Audio power", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_E740_AMP_ON, "Output amp", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO_E740_MIC_ON, "Mic amp", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /* ----------------------------------------------------------------------- */ static struct platform_device *e740_devices[] __initdata = { @@ -540,6 +544,7 @@ static void __init e740_init(void) "UDCCLK", &pxa25x_device_udc.dev), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&e740_audio_gpio_table); platform_add_devices(ARRAY_AND_SIZE(e740_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); @@ -699,7 +704,6 @@ static struct tc6393xb_platform_data e750_tc6393xb_info = { .irq_base = IRQ_BOARD_START, .scr_pll2cr = 0x0cc1, .scr_gper = 0, - .gpio_base = -1, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, .enable = &eseries_tmio_enable, @@ -716,6 +720,15 @@ static struct platform_device e750_tc6393xb_device = { .resource = eseries_tmio_resources, }; +static struct gpiod_lookup_table e750_audio_gpio_table = { + .dev_id = "e750-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E750_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_E750_SPK_AMP_OFF, "Mic amp", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct platform_device e750_audio_device = { .name = "e750-audio", .id = -1, @@ -740,6 +753,7 @@ static void __init e750_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&e750_audio_gpio_table); platform_add_devices(ARRAY_AND_SIZE(e750_devices)); pxa_set_ac97_info(NULL); pxa_set_ficp_info(&e7xx_ficp_platform_data); @@ -918,7 +932,6 @@ static struct tc6393xb_platform_data e800_tc6393xb_info = { .irq_base = IRQ_BOARD_START, .scr_pll2cr = 0x0cc1, .scr_gper = 0, - .gpio_base = -1, .suspend = &eseries_tmio_suspend, .resume = &eseries_tmio_resume, .enable = &eseries_tmio_enable, @@ -935,6 +948,15 @@ static struct platform_device e800_tc6393xb_device = { .resource = eseries_tmio_resources, }; +static struct gpiod_lookup_table e800_audio_gpio_table = { + .dev_id = "e800-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO_E800_HP_AMP_OFF, "Output amp", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO_E800_SPK_AMP_ON, "Mic amp", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct platform_device e800_audio_device = { .name = "e800-audio", .id = -1, @@ -959,6 +981,7 @@ static void __init e800_init(void) "GPIO11_CLK", NULL), eseries_get_tmio_gpios(); gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&e800_audio_gpio_table); platform_add_devices(ARRAY_AND_SIZE(e800_devices)); pxa_set_ac97_info(NULL); } diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index eb85950e7c0e..69c2ec02a16c 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -29,7 +29,6 @@ #include "pxa27x.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/hardware.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/media/camera-pxa.h> diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c index ab7cdffd7ea8..02fdde7e3e34 100644 --- a/arch/arm/mach-pxa/generic.c +++ b/arch/arm/mach-pxa/generic.c @@ -17,15 +17,18 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/soc/pxa/cpu.h> +#include <linux/soc/pxa/smemc.h> +#include <linux/clk/pxa.h> -#include <mach/hardware.h> #include <asm/mach/map.h> #include <asm/mach-types.h> -#include <mach/irqs.h> -#include <mach/reset.h> -#include <mach/smemc.h> -#include <mach/pxa3xx-regs.h> +#include "addr-map.h" +#include "irqs.h" +#include "reset.h" +#include "smemc.h" +#include "pxa3xx-regs.h" #include "generic.h" #include <clocksource/pxa.h> @@ -46,28 +49,47 @@ void clear_reset_status(unsigned int mask) void __init pxa_timer_init(void) { if (cpu_is_pxa25x()) - pxa25x_clocks_init(); + pxa25x_clocks_init(io_p2v(0x41300000)); if (cpu_is_pxa27x()) - pxa27x_clocks_init(); + pxa27x_clocks_init(io_p2v(0x41300000)); if (cpu_is_pxa3xx()) - pxa3xx_clocks_init(); + pxa3xx_clocks_init(io_p2v(0x41340000), io_p2v(0x41350000)); pxa_timer_nodt_init(IRQ_OST0, io_p2v(0x40a00000)); } -/* - * Get the clock frequency as reflected by CCCR and the turbo flag. - * We assume these values have been applied via a fcs. - * If info is not 0 we also display the current settings. - */ -unsigned int get_clk_frequency_khz(int info) +void pxa_smemc_set_pcmcia_timing(int sock, u32 mcmem, u32 mcatt, u32 mcio) { - if (cpu_is_pxa25x()) - return pxa25x_get_clk_frequency_khz(info); - else if (cpu_is_pxa27x()) - return pxa27x_get_clk_frequency_khz(info); - return 0; + __raw_writel(mcmem, MCMEM(sock)); + __raw_writel(mcatt, MCATT(sock)); + __raw_writel(mcio, MCIO(sock)); +} +EXPORT_SYMBOL_GPL(pxa_smemc_set_pcmcia_timing); + +void pxa_smemc_set_pcmcia_socket(int nr) +{ + switch (nr) { + case 0: + __raw_writel(0, MECR); + break; + case 1: + /* + * We have at least one socket, so set MECR:CIT + * (Card Is There) + */ + __raw_writel(MECR_CIT, MECR); + break; + case 2: + /* Set CIT and MECR:NOS (Number Of Sockets) */ + __raw_writel(MECR_CIT | MECR_NOS, MECR); + break; + } +} +EXPORT_SYMBOL_GPL(pxa_smemc_set_pcmcia_socket); + +void __iomem *pxa_smemc_get_mdrefr(void) +{ + return MDREFR; } -EXPORT_SYMBOL(get_clk_frequency_khz); /* * Intel PXA2xx internal register mapping. diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index 3b7873f8e1f8..7bb1499de4c5 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -10,7 +10,6 @@ struct irq_data; -extern unsigned int get_clk_frequency_khz(int info); extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); extern void __init pxa_map_io(void); @@ -23,19 +22,16 @@ extern void pxa_timer_init(void); #define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x) #define pxa25x_handle_irq icip_handle_irq -extern int __init pxa25x_clocks_init(void); extern void __init pxa25x_init_irq(void); extern void __init pxa25x_map_io(void); extern void __init pxa26x_init_irq(void); #define pxa27x_handle_irq ichp_handle_irq -extern int __init pxa27x_clocks_init(void); extern unsigned pxa27x_get_clk_frequency_khz(int); extern void __init pxa27x_init_irq(void); extern void __init pxa27x_map_io(void); #define pxa3xx_handle_irq ichp_handle_irq -extern int __init pxa3xx_clocks_init(void); extern void __init pxa3xx_init_irq(void); extern void __init pxa3xx_map_io(void); @@ -71,8 +67,3 @@ extern unsigned pxa25x_get_clk_frequency_khz(int); #define pxa27x_get_clk_frequency_khz(x) (0) #endif -#ifdef CONFIG_PXA3xx -extern unsigned pxa3xx_get_clk_frequency_khz(int); -#else -#define pxa3xx_get_clk_frequency_khz(x) (0) -#endif diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index 49dd618b10f7..72b08a9bf0fd 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -28,7 +28,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h> diff --git a/arch/arm/mach-pxa/gumstix.h b/arch/arm/mach-pxa/gumstix.h index 470250cdee16..9005b3c0aabd 100644 --- a/arch/arm/mach-pxa/gumstix.h +++ b/arch/arm/mach-pxa/gumstix.h @@ -3,7 +3,7 @@ * arch/arm/mach-pxa/include/mach/gumstix.h */ -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* BTRESET - Reset line to Bluetooth module, active low signal. */ #define GPIO_GUMSTIX_BTRESET 7 diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index ece1e71c90a9..212efe24aedb 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -29,7 +29,7 @@ #include "pxa25x.h" #include "h5000.h" #include "udc.h" -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/hx4700-pcmcia.c b/arch/arm/mach-pxa/hx4700-pcmcia.c new file mode 100644 index 000000000000..e2331dfe427d --- /dev/null +++ b/arch/arm/mach-pxa/hx4700-pcmcia.c @@ -0,0 +1,118 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2012 Paul Parsons <lost.distance@yahoo.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/gpio.h> +#include <linux/irq.h> + +#include <asm/mach-types.h> +#include "hx4700.h" + +#include <pcmcia/soc_common.h> + +static struct gpio gpios[] = { + { GPIO114_HX4700_CF_RESET, GPIOF_OUT_INIT_LOW, "CF reset" }, + { EGPIO4_CF_3V3_ON, GPIOF_OUT_INIT_LOW, "CF 3.3V enable" }, +}; + +static int hx4700_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(gpios, ARRAY_SIZE(gpios)); + if (ret) + goto out; + + /* + * IRQ type must be set before soc_pcmcia_hw_init() calls request_irq(). + * The asic3 default IRQ type is level trigger low level detect, exactly + * the the signal present on GPIOD4_CF_nCD when a CF card is inserted. + * If the IRQ type is not changed, the asic3 interrupt handler will loop + * repeatedly because it is unable to clear the level trigger interrupt. + */ + irq_set_irq_type(gpio_to_irq(GPIOD4_CF_nCD), IRQ_TYPE_EDGE_BOTH); + + skt->stat[SOC_STAT_CD].gpio = GPIOD4_CF_nCD; + skt->stat[SOC_STAT_CD].name = "PCMCIA CD"; + skt->stat[SOC_STAT_RDY].gpio = GPIO60_HX4700_CF_RNB; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + +out: + return ret; +} + +static void hx4700_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(gpios, ARRAY_SIZE(gpios)); +} + +static void hx4700_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int hx4700_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + switch (state->Vcc) { + case 0: + gpio_set_value(EGPIO4_CF_3V3_ON, 0); + break; + case 33: + gpio_set_value(EGPIO4_CF_3V3_ON, 1); + break; + default: + printk(KERN_ERR "pcmcia: Unsupported Vcc: %d\n", state->Vcc); + return -EINVAL; + } + + gpio_set_value(GPIO114_HX4700_CF_RESET, (state->flags & SS_RESET) != 0); + + return 0; +} + +static struct pcmcia_low_level hx4700_pcmcia_ops = { + .owner = THIS_MODULE, + .nr = 1, + .hw_init = hx4700_pcmcia_hw_init, + .hw_shutdown = hx4700_pcmcia_hw_shutdown, + .socket_state = hx4700_pcmcia_socket_state, + .configure_socket = hx4700_pcmcia_configure_socket, +}; + +static struct platform_device *hx4700_pcmcia_device; + +static int __init hx4700_pcmcia_init(void) +{ + struct platform_device *pdev; + + if (!machine_is_h4700()) + return -ENODEV; + + pdev = platform_device_register_data(NULL, "pxa2xx-pcmcia", -1, + &hx4700_pcmcia_ops, sizeof(hx4700_pcmcia_ops)); + if (IS_ERR(pdev)) + return PTR_ERR(pdev); + + hx4700_pcmcia_device = pdev; + + return 0; +} + +static void __exit hx4700_pcmcia_exit(void) +{ + platform_device_unregister(hx4700_pcmcia_device); +} + +module_init(hx4700_pcmcia_init); +module_exit(hx4700_pcmcia_exit); + +MODULE_AUTHOR("Paul Parsons <lost.distance@yahoo.com>"); +MODULE_DESCRIPTION("HP iPAQ hx4700 PCMCIA driver"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index 1d4c5db54be2..2fd665944103 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -36,12 +36,12 @@ #include <linux/spi/pxa2xx_spi.h> #include <linux/platform_data/i2c-pxa.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include "pxa27x.h" -#include <mach/hx4700.h> +#include "addr-map.h" +#include "hx4700.h" #include <linux/platform_data/irda-pxaficp.h> #include <sound/ak4641.h> @@ -616,7 +616,6 @@ static struct pxa2xx_spi_chip tsc2046_chip = { .tx_threshold = 1, .rx_threshold = 2, .timeout = 64, - .gpio_cs = GPIO88_HX4700_TSC2046_CS, }; static struct spi_board_info tsc2046_board_info[] __initdata = { @@ -635,6 +634,14 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = { .enable_dma = 1, }; +static struct gpiod_lookup_table pxa_ssp2_gpio_table = { + .dev_id = "spi2", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_HX4700_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW), + { }, + }, +}; + /* * External power */ @@ -827,6 +834,19 @@ static struct i2c_board_info i2c_board_info[] __initdata = { }, }; +static struct gpiod_lookup_table hx4700_audio_gpio_table = { + .dev_id = "hx4700-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO75_HX4700_EARPHONE_nDET, + "earphone-det", GPIO_ACTIVE_LOW), + GPIO_LOOKUP("gpio-pxa", GPIO92_HX4700_HP_DRIVER, + "hp-driver", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", GPIO107_HX4700_SPK_nSD, + "spk-sd", GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct platform_device audio = { .name = "hx4700-audio", .id = -1, @@ -888,6 +908,7 @@ static void __init hx4700_init(void) gpiod_add_lookup_table(&bq24022_gpiod_table); gpiod_add_lookup_table(&gpio_vbus_gpiod_table); + gpiod_add_lookup_table(&hx4700_audio_gpio_table); platform_add_devices(devices, ARRAY_SIZE(devices)); pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup)); @@ -896,6 +917,7 @@ static void __init hx4700_init(void) pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(i2c_board_info)); i2c_register_board_info(1, ARRAY_AND_SIZE(pi2c_board_info)); + gpiod_add_lookup_table(&pxa_ssp2_gpio_table); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info)); diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/hx4700.h index 0c30e6d9c660..0c30e6d9c660 100644 --- a/arch/arm/mach-pxa/include/mach/hx4700.h +++ b/arch/arm/mach-pxa/hx4700.h diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 04a12523cdee..624088257cfc 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -13,7 +13,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/property.h> -#include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -42,7 +42,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info1 = { .rx_threshold = 128, .dma_burst_size = 8, .timeout = 235, - .gpio_cs = ICONTROL_MCP251x_nCS1 }; static struct pxa2xx_spi_chip mcp251x_chip_info2 = { @@ -50,7 +49,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info2 = { .rx_threshold = 128, .dma_burst_size = 8, .timeout = 235, - .gpio_cs = ICONTROL_MCP251x_nCS2 }; static struct pxa2xx_spi_chip mcp251x_chip_info3 = { @@ -58,7 +56,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info3 = { .rx_threshold = 128, .dma_burst_size = 8, .timeout = 235, - .gpio_cs = ICONTROL_MCP251x_nCS3 }; static struct pxa2xx_spi_chip mcp251x_chip_info4 = { @@ -66,7 +63,6 @@ static struct pxa2xx_spi_chip mcp251x_chip_info4 = { .rx_threshold = 128, .dma_burst_size = 8, .timeout = 235, - .gpio_cs = ICONTROL_MCP251x_nCS4 }; static const struct property_entry mcp251x_properties[] = { @@ -143,6 +139,24 @@ struct platform_device pxa_spi_ssp4 = { } }; +static struct gpiod_lookup_table pxa_ssp3_gpio_table = { + .dev_id = "spi3", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS1, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS2, "cs", 1, GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table pxa_ssp4_gpio_table = { + .dev_id = "spi4", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS3, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS4, "cs", 1, GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct platform_device *icontrol_spi_devices[] __initdata = { &pxa_spi_ssp3, &pxa_spi_ssp4, @@ -175,6 +189,8 @@ static mfp_cfg_t mfp_can_cfg[] __initdata = { static void __init icontrol_can_init(void) { pxa3xx_mfp_config(ARRAY_AND_SIZE(mfp_can_cfg)); + gpiod_add_lookup_table(&pxa_ssp3_gpio_table); + gpiod_add_lookup_table(&pxa_ssp4_gpio_table); platform_add_devices(ARRAY_AND_SIZE(icontrol_spi_devices)); spi_register_board_info(ARRAY_AND_SIZE(mcp251x_board_info)); } diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index fb0850af8496..525d01ddfbbb 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -22,7 +22,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -31,7 +30,6 @@ #include "pxa25x.h" #include "idp.h" #include <linux/platform_data/video-pxafb.h> -#include <mach/bitfield.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/smc91x.h> diff --git a/arch/arm/mach-pxa/idp.h b/arch/arm/mach-pxa/idp.h index a89e6723b1a1..81b9bd9ba754 100644 --- a/arch/arm/mach-pxa/idp.h +++ b/arch/arm/mach-pxa/idp.h @@ -20,7 +20,7 @@ * IDP hardware. */ -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ #define IDP_FLASH_PHYS (PXA_CS0_PHYS) #define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h deleted file mode 100644 index 7beebf7297b5..000000000000 --- a/arch/arm/mach-pxa/include/mach/audio.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_AUDIO_H__ -#define __ASM_ARCH_AUDIO_H__ - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/ac97_codec.h> - -/* - * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95) - * a -1 value means no gpio will be used for reset - * @codec_pdata: AC97 codec platform_data - - * reset_gpio should only be specified for pxa27x CPUs where a silicon - * bug prevents correct operation of the reset line. If not specified, - * the default behaviour on these CPUs is to consider gpio 113 as the - * AC97 reset line, which is the default on most boards. - */ -typedef struct { - int (*startup)(struct snd_pcm_substream *, void *); - void (*shutdown)(struct snd_pcm_substream *, void *); - void (*suspend)(void *); - void (*resume)(void *); - void *priv; - int reset_gpio; - void *codec_pdata[AC97_BUS_MAX_DEVICES]; -} pxa2xx_audio_ops_t; - -extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); - -#endif diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h deleted file mode 100644 index fe2ca441bc0a..000000000000 --- a/arch/arm/mach-pxa/include/mach/bitfield.h +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * FILE bitfield.h - * - * Version 1.1 - * Author Copyright (c) Marc A. Viredaz, 1998 - * DEC Western Research Laboratory, Palo Alto, CA - * Date April 1998 (April 1997) - * System Advanced RISC Machine (ARM) - * Language C or ARM Assembly - * Purpose Definition of macros to operate on bit fields. - */ - - - -#ifndef __BITFIELD_H -#define __BITFIELD_H - -#ifndef __ASSEMBLY__ -#define UData(Data) ((unsigned long) (Data)) -#else -#define UData(Data) (Data) -#endif - - -/* - * MACRO: Fld - * - * Purpose - * The macro "Fld" encodes a bit field, given its size and its shift value - * with respect to bit 0. - * - * Note - * A more intuitive way to encode bit fields would have been to use their - * mask. However, extracting size and shift value information from a bit - * field's mask is cumbersome and might break the assembler (255-character - * line-size limit). - * - * Input - * Size Size of the bit field, in number of bits. - * Shft Shift value of the bit field with respect to bit 0. - * - * Output - * Fld Encoded bit field. - */ - -#define Fld(Size, Shft) (((Size) << 16) + (Shft)) - - -/* - * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit - * - * Purpose - * The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return - * the size, shift value, mask, aligned mask, and first bit of a - * bit field. - * - * Input - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FSize Size of the bit field, in number of bits. - * FShft Shift value of the bit field with respect to bit 0. - * FMsk Mask for the bit field. - * FAlnMsk Mask for the bit field, aligned on bit 0. - * F1stBit First bit of the bit field. - */ - -#define FSize(Field) ((Field) >> 16) -#define FShft(Field) ((Field) & 0x0000FFFF) -#define FMsk(Field) (((UData (1) << FSize (Field)) - 1) << FShft (Field)) -#define FAlnMsk(Field) ((UData (1) << FSize (Field)) - 1) -#define F1stBit(Field) (UData (1) << FShft (Field)) - - -/* - * MACRO: FInsrt - * - * Purpose - * The macro "FInsrt" inserts a value into a bit field by shifting the - * former appropriately. - * - * Input - * Value Bit-field value. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FInsrt Bit-field value positioned appropriately. - */ - -#define FInsrt(Value, Field) \ - (UData (Value) << FShft (Field)) - - -/* - * MACRO: FExtr - * - * Purpose - * The macro "FExtr" extracts the value of a bit field by masking and - * shifting it appropriately. - * - * Input - * Data Data containing the bit-field to be extracted. - * Field Encoded bit field (using the macro "Fld"). - * - * Output - * FExtr Bit-field value. - */ - -#define FExtr(Data, Field) \ - ((UData (Data) >> FShft (Field)) & FAlnMsk (Field)) - - -#endif /* __BITFIELD_H */ diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h deleted file mode 100644 index 79f9842a7e1c..000000000000 --- a/arch/arm/mach-pxa/include/mach/dma.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-pxa/include/mach/dma.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software, Inc. - */ -#ifndef __ASM_ARCH_DMA_H -#define __ASM_ARCH_DMA_H - -#include <mach/hardware.h> - -/* DMA Controller Registers Definitions */ -#define DMAC_REGS_VIRT io_p2v(0x40000000) - -#endif /* _ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-pxa/include/mach/generic.h b/arch/arm/mach-pxa/include/mach/generic.h deleted file mode 100644 index 665542e0c9e2..000000000000 --- a/arch/arm/mach-pxa/include/mach/generic.h +++ /dev/null @@ -1 +0,0 @@ -#include "../../generic.h" diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h deleted file mode 100644 index ee7eab16135f..000000000000 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ /dev/null @@ -1,305 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-pxa/include/mach/hardware.h - * - * Author: Nicolas Pitre - * Created: Jun 15, 2001 - * Copyright: MontaVista Software Inc. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include <mach/addr-map.h> - -/* - * Workarounds for at least 2 errata so far require this. - * The mapping is set in mach-pxa/generic.c. - */ -#define UNCACHED_PHYS_0 0xfe000000 -#define UNCACHED_PHYS_0_SIZE 0x00100000 - -/* - * Intel PXA2xx internal register mapping: - * - * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff - * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff - * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff - * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff - * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff - * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff - * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff - * - * Note that not all PXA2xx chips implement all those addresses, and the - * kernel only maps the minimum needed range of this mapping. - */ -#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) -#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) - -#ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) - -/* With indexed regs we don't want to feed the index through io_p2v() - especially if it is a variable, otherwise horrible code will result. */ -# define __REG2(x,y) \ - (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) - -# define __PREG(x) (io_v2p((u32)&(x))) - -#else - -# define __REG(x) io_p2v(x) -# define __PREG(x) io_v2p(x) - -#endif - -#ifndef __ASSEMBLY__ - -#include <asm/cputype.h> - -/* - * CPU Stepping CPU_ID JTAG_ID - * - * PXA210 B0 0x69052922 0x2926C013 - * PXA210 B1 0x69052923 0x3926C013 - * PXA210 B2 0x69052924 0x4926C013 - * PXA210 C0 0x69052D25 0x5926C013 - * - * PXA250 A0 0x69052100 0x09264013 - * PXA250 A1 0x69052101 0x19264013 - * PXA250 B0 0x69052902 0x29264013 - * PXA250 B1 0x69052903 0x39264013 - * PXA250 B2 0x69052904 0x49264013 - * PXA250 C0 0x69052D05 0x59264013 - * - * PXA255 A0 0x69052D06 0x69264013 - * - * PXA26x A0 0x69052903 0x39264013 - * PXA26x B0 0x69052D05 0x59264013 - * - * PXA27x A0 0x69054110 0x09265013 - * PXA27x A1 0x69054111 0x19265013 - * PXA27x B0 0x69054112 0x29265013 - * PXA27x B1 0x69054113 0x39265013 - * PXA27x C0 0x69054114 0x49265013 - * PXA27x C5 0x69054117 0x79265013 - * - * PXA30x A0 0x69056880 0x0E648013 - * PXA30x A1 0x69056881 0x1E648013 - * PXA31x A0 0x69056890 0x0E649013 - * PXA31x A1 0x69056891 0x1E649013 - * PXA31x A2 0x69056892 0x2E649013 - * PXA32x B1 0x69056825 0x5E642013 - * PXA32x B2 0x69056826 0x6E642013 - * - * PXA930 B0 0x69056835 0x5E643013 - * PXA930 B1 0x69056837 0x7E643013 - * PXA930 B2 0x69056838 0x8E643013 - * - * PXA935 A0 0x56056931 0x1E653013 - * PXA935 B0 0x56056936 0x6E653013 - * PXA935 B1 0x56056938 0x8E653013 - */ -#ifdef CONFIG_PXA25x -#define __cpu_is_pxa210(id) \ - ({ \ - unsigned int _id = (id) & 0xf3f0; \ - _id == 0x2120; \ - }) - -#define __cpu_is_pxa250(id) \ - ({ \ - unsigned int _id = (id) & 0xf3ff; \ - _id <= 0x2105; \ - }) - -#define __cpu_is_pxa255(id) \ - ({ \ - unsigned int _id = (id) & 0xffff; \ - _id == 0x2d06; \ - }) - -#define __cpu_is_pxa25x(id) \ - ({ \ - unsigned int _id = (id) & 0xf300; \ - _id == 0x2100; \ - }) -#else -#define __cpu_is_pxa210(id) (0) -#define __cpu_is_pxa250(id) (0) -#define __cpu_is_pxa255(id) (0) -#define __cpu_is_pxa25x(id) (0) -#endif - -#ifdef CONFIG_PXA27x -#define __cpu_is_pxa27x(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x411; \ - }) -#else -#define __cpu_is_pxa27x(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA300 -#define __cpu_is_pxa300(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x688; \ - }) -#else -#define __cpu_is_pxa300(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA310 -#define __cpu_is_pxa310(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x689; \ - }) -#else -#define __cpu_is_pxa310(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA320 -#define __cpu_is_pxa320(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x603 || _id == 0x682; \ - }) -#else -#define __cpu_is_pxa320(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA930 -#define __cpu_is_pxa930(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x683; \ - }) -#else -#define __cpu_is_pxa930(id) (0) -#endif - -#ifdef CONFIG_CPU_PXA935 -#define __cpu_is_pxa935(id) \ - ({ \ - unsigned int _id = (id) >> 4 & 0xfff; \ - _id == 0x693; \ - }) -#else -#define __cpu_is_pxa935(id) (0) -#endif - -#define cpu_is_pxa210() \ - ({ \ - __cpu_is_pxa210(read_cpuid_id()); \ - }) - -#define cpu_is_pxa250() \ - ({ \ - __cpu_is_pxa250(read_cpuid_id()); \ - }) - -#define cpu_is_pxa255() \ - ({ \ - __cpu_is_pxa255(read_cpuid_id()); \ - }) - -#define cpu_is_pxa25x() \ - ({ \ - __cpu_is_pxa25x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa27x() \ - ({ \ - __cpu_is_pxa27x(read_cpuid_id()); \ - }) - -#define cpu_is_pxa300() \ - ({ \ - __cpu_is_pxa300(read_cpuid_id()); \ - }) - -#define cpu_is_pxa310() \ - ({ \ - __cpu_is_pxa310(read_cpuid_id()); \ - }) - -#define cpu_is_pxa320() \ - ({ \ - __cpu_is_pxa320(read_cpuid_id()); \ - }) - -#define cpu_is_pxa930() \ - ({ \ - __cpu_is_pxa930(read_cpuid_id()); \ - }) - -#define cpu_is_pxa935() \ - ({ \ - __cpu_is_pxa935(read_cpuid_id()); \ - }) - - - -/* - * CPUID Core Generation Bit - * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x - */ -#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) -#define __cpu_is_pxa2xx(id) \ - ({ \ - unsigned int _id = (id) >> 13 & 0x7; \ - _id <= 0x2; \ - }) -#else -#define __cpu_is_pxa2xx(id) (0) -#endif - -#ifdef CONFIG_PXA3xx -#define __cpu_is_pxa3xx(id) \ - ({ \ - __cpu_is_pxa300(id) \ - || __cpu_is_pxa310(id) \ - || __cpu_is_pxa320(id) \ - || __cpu_is_pxa93x(id); \ - }) -#else -#define __cpu_is_pxa3xx(id) (0) -#endif - -#if defined(CONFIG_CPU_PXA930) || defined(CONFIG_CPU_PXA935) -#define __cpu_is_pxa93x(id) \ - ({ \ - __cpu_is_pxa930(id) \ - || __cpu_is_pxa935(id); \ - }) -#else -#define __cpu_is_pxa93x(id) (0) -#endif - -#define cpu_is_pxa2xx() \ - ({ \ - __cpu_is_pxa2xx(read_cpuid_id()); \ - }) - -#define cpu_is_pxa3xx() \ - ({ \ - __cpu_is_pxa3xx(read_cpuid_id()); \ - }) - -#define cpu_is_pxa93x() \ - ({ \ - __cpu_is_pxa93x(read_cpuid_id()); \ - }) - - -/* - * return current memory and LCD clock frequency in units of 10kHz - */ -extern unsigned int get_memclk_frequency_10khz(void); - -#endif - -#endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h deleted file mode 100644 index 4b31bef9e50a..000000000000 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ /dev/null @@ -1,36 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * MTD primitives for XIP support. Architecture specific functions - * - * Do not include this file directly. It's included from linux/mtd/xip.h - * - * Author: Nicolas Pitre - * Created: Nov 2, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - */ - -#ifndef __ARCH_PXA_MTD_XIP_H__ -#define __ARCH_PXA_MTD_XIP_H__ - -#include <mach/regs-ost.h> - -/* restored July 2017, this did not build since 2011! */ - -#define ICIP io_p2v(0x40d00000) -#define ICMR io_p2v(0x40d00004) -#define xip_irqpending() (readl(ICIP) & readl(ICMR)) - -/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ -#define xip_currtime() readl(OSCR) -#define xip_elapsed_since(x) (signed)((readl(OSCR) - (x)) / 4) - -/* - * xip_cpu_idle() is used when waiting for a delay equal or larger than - * the system timer tick period. This should put the CPU into idle mode - * to save power and to be woken up only when some interrupts are pending. - * As above, this should not rely upon standard kernel code. - */ - -#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1)) - -#endif /* __ARCH_PXA_MTD_XIP_H__ */ diff --git a/arch/arm/mach-pxa/include/mach/regs-ac97.h b/arch/arm/mach-pxa/include/mach/regs-ac97.h deleted file mode 100644 index 1db96fd4df32..000000000000 --- a/arch/arm/mach-pxa/include/mach/regs-ac97.h +++ /dev/null @@ -1,102 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_REGS_AC97_H -#define __ASM_ARCH_REGS_AC97_H - -#include <mach/hardware.h> - -/* - * AC97 Controller registers - */ - -#define POCR __REG(0x40500000) /* PCM Out Control Register */ -#define POCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define POCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define PICR __REG(0x40500004) /* PCM In Control Register */ -#define PICR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define PICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MCCR __REG(0x40500008) /* Mic In Control Register */ -#define MCCR_FEIE (1 << 3) /* FIFO Error Interrupt Enable */ -#define MCCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define GCR __REG(0x4050000C) /* Global Control Register */ -#ifdef CONFIG_PXA3xx -#define GCR_CLKBPB (1 << 31) /* Internal clock enable */ -#endif -#define GCR_nDMAEN (1 << 24) /* non DMA Enable */ -#define GCR_CDONE_IE (1 << 19) /* Command Done Interrupt Enable */ -#define GCR_SDONE_IE (1 << 18) /* Status Done Interrupt Enable */ -#define GCR_SECRDY_IEN (1 << 9) /* Secondary Ready Interrupt Enable */ -#define GCR_PRIRDY_IEN (1 << 8) /* Primary Ready Interrupt Enable */ -#define GCR_SECRES_IEN (1 << 5) /* Secondary Resume Interrupt Enable */ -#define GCR_PRIRES_IEN (1 << 4) /* Primary Resume Interrupt Enable */ -#define GCR_ACLINK_OFF (1 << 3) /* AC-link Shut Off */ -#define GCR_WARM_RST (1 << 2) /* AC97 Warm Reset */ -#define GCR_COLD_RST (1 << 1) /* AC'97 Cold Reset (0 = active) */ -#define GCR_GIE (1 << 0) /* Codec GPI Interrupt Enable */ - -#define POSR __REG(0x40500010) /* PCM Out Status Register */ -#define POSR_FIFOE (1 << 4) /* FIFO error */ -#define POSR_FSR (1 << 2) /* FIFO Service Request */ - -#define PISR __REG(0x40500014) /* PCM In Status Register */ -#define PISR_FIFOE (1 << 4) /* FIFO error */ -#define PISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define PISR_FSR (1 << 2) /* FIFO Service Request */ - -#define MCSR __REG(0x40500018) /* Mic In Status Register */ -#define MCSR_FIFOE (1 << 4) /* FIFO error */ -#define MCSR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define MCSR_FSR (1 << 2) /* FIFO Service Request */ - -#define GSR __REG(0x4050001C) /* Global Status Register */ -#define GSR_CDONE (1 << 19) /* Command Done */ -#define GSR_SDONE (1 << 18) /* Status Done */ -#define GSR_RDCS (1 << 15) /* Read Completion Status */ -#define GSR_BIT3SLT12 (1 << 14) /* Bit 3 of slot 12 */ -#define GSR_BIT2SLT12 (1 << 13) /* Bit 2 of slot 12 */ -#define GSR_BIT1SLT12 (1 << 12) /* Bit 1 of slot 12 */ -#define GSR_SECRES (1 << 11) /* Secondary Resume Interrupt */ -#define GSR_PRIRES (1 << 10) /* Primary Resume Interrupt */ -#define GSR_SCR (1 << 9) /* Secondary Codec Ready */ -#define GSR_PCR (1 << 8) /* Primary Codec Ready */ -#define GSR_MCINT (1 << 7) /* Mic In Interrupt */ -#define GSR_POINT (1 << 6) /* PCM Out Interrupt */ -#define GSR_PIINT (1 << 5) /* PCM In Interrupt */ -#define GSR_ACOFFD (1 << 3) /* AC-link Shut Off Done */ -#define GSR_MOINT (1 << 2) /* Modem Out Interrupt */ -#define GSR_MIINT (1 << 1) /* Modem In Interrupt */ -#define GSR_GSCI (1 << 0) /* Codec GPI Status Change Interrupt */ - -#define CAR __REG(0x40500020) /* CODEC Access Register */ -#define CAR_CAIP (1 << 0) /* Codec Access In Progress */ - -#define PCDR __REG(0x40500040) /* PCM FIFO Data Register */ -#define MCDR __REG(0x40500060) /* Mic-in FIFO Data Register */ - -#define MOCR __REG(0x40500100) /* Modem Out Control Register */ -#define MOCR_FEIE (1 << 3) /* FIFO Error */ -#define MOCR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MICR __REG(0x40500108) /* Modem In Control Register */ -#define MICR_FEIE (1 << 3) /* FIFO Error */ -#define MICR_FSRIE (1 << 1) /* FIFO Service Request Interrupt Enable */ - -#define MOSR __REG(0x40500110) /* Modem Out Status Register */ -#define MOSR_FIFOE (1 << 4) /* FIFO error */ -#define MOSR_FSR (1 << 2) /* FIFO Service Request */ - -#define MISR __REG(0x40500118) /* Modem In Status Register */ -#define MISR_FIFOE (1 << 4) /* FIFO error */ -#define MISR_EOC (1 << 3) /* DMA End-of-Chain (exclusive clear) */ -#define MISR_FSR (1 << 2) /* FIFO Service Request */ - -#define MODR __REG(0x40500140) /* Modem FIFO Data Register */ - -#define PAC_REG_BASE __REG(0x40500200) /* Primary Audio Codec */ -#define SAC_REG_BASE __REG(0x40500300) /* Secondary Audio Codec */ -#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */ -#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */ - -#endif /* __ASM_ARCH_REGS_AC97_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h deleted file mode 100644 index e2b6e3d1f625..000000000000 --- a/arch/arm/mach-pxa/include/mach/regs-lcd.h +++ /dev/null @@ -1,198 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __ASM_ARCH_REGS_LCD_H -#define __ASM_ARCH_REGS_LCD_H - -#include <mach/bitfield.h> - -/* - * LCD Controller Registers and Bits Definitions - */ -#define LCCR0 (0x000) /* LCD Controller Control Register 0 */ -#define LCCR1 (0x004) /* LCD Controller Control Register 1 */ -#define LCCR2 (0x008) /* LCD Controller Control Register 2 */ -#define LCCR3 (0x00C) /* LCD Controller Control Register 3 */ -#define LCCR4 (0x010) /* LCD Controller Control Register 4 */ -#define LCCR5 (0x014) /* LCD Controller Control Register 5 */ -#define LCSR (0x038) /* LCD Controller Status Register 0 */ -#define LCSR1 (0x034) /* LCD Controller Status Register 1 */ -#define LIIDR (0x03C) /* LCD Controller Interrupt ID Register */ -#define TMEDRGBR (0x040) /* TMED RGB Seed Register */ -#define TMEDCR (0x044) /* TMED Control Register */ - -#define FBR0 (0x020) /* DMA Channel 0 Frame Branch Register */ -#define FBR1 (0x024) /* DMA Channel 1 Frame Branch Register */ -#define FBR2 (0x028) /* DMA Channel 2 Frame Branch Register */ -#define FBR3 (0x02C) /* DMA Channel 2 Frame Branch Register */ -#define FBR4 (0x030) /* DMA Channel 2 Frame Branch Register */ -#define FBR5 (0x110) /* DMA Channel 2 Frame Branch Register */ -#define FBR6 (0x114) /* DMA Channel 2 Frame Branch Register */ - -#define OVL1C1 (0x050) /* Overlay 1 Control Register 1 */ -#define OVL1C2 (0x060) /* Overlay 1 Control Register 2 */ -#define OVL2C1 (0x070) /* Overlay 2 Control Register 1 */ -#define OVL2C2 (0x080) /* Overlay 2 Control Register 2 */ - -#define CMDCR (0x100) /* Command Control Register */ -#define PRSR (0x104) /* Panel Read Status Register */ - -#define LCCR3_BPP(x) ((((x) & 0x7) << 24) | (((x) & 0x8) ? (1 << 29) : 0)) - -#define LCCR3_PDFOR_0 (0 << 30) -#define LCCR3_PDFOR_1 (1 << 30) -#define LCCR3_PDFOR_2 (2 << 30) -#define LCCR3_PDFOR_3 (3 << 30) - -#define LCCR4_PAL_FOR_0 (0 << 15) -#define LCCR4_PAL_FOR_1 (1 << 15) -#define LCCR4_PAL_FOR_2 (2 << 15) -#define LCCR4_PAL_FOR_3 (3 << 15) -#define LCCR4_PAL_FOR_MASK (3 << 15) - -#define FDADR0 (0x200) /* DMA Channel 0 Frame Descriptor Address Register */ -#define FDADR1 (0x210) /* DMA Channel 1 Frame Descriptor Address Register */ -#define FDADR2 (0x220) /* DMA Channel 2 Frame Descriptor Address Register */ -#define FDADR3 (0x230) /* DMA Channel 3 Frame Descriptor Address Register */ -#define FDADR4 (0x240) /* DMA Channel 4 Frame Descriptor Address Register */ -#define FDADR5 (0x250) /* DMA Channel 5 Frame Descriptor Address Register */ -#define FDADR6 (0x260) /* DMA Channel 6 Frame Descriptor Address Register */ - -#define LCCR0_ENB (1 << 0) /* LCD Controller enable */ -#define LCCR0_CMS (1 << 1) /* Color/Monochrome Display Select */ -#define LCCR0_Color (LCCR0_CMS*0) /* Color display */ -#define LCCR0_Mono (LCCR0_CMS*1) /* Monochrome display */ -#define LCCR0_SDS (1 << 2) /* Single/Dual Panel Display Select */ -#define LCCR0_Sngl (LCCR0_SDS*0) /* Single panel display */ -#define LCCR0_Dual (LCCR0_SDS*1) /* Dual panel display */ - -#define LCCR0_LDM (1 << 3) /* LCD Disable Done Mask */ -#define LCCR0_SFM (1 << 4) /* Start of frame mask */ -#define LCCR0_IUM (1 << 5) /* Input FIFO underrun mask */ -#define LCCR0_EFM (1 << 6) /* End of Frame mask */ -#define LCCR0_PAS (1 << 7) /* Passive/Active display Select */ -#define LCCR0_Pas (LCCR0_PAS*0) /* Passive display (STN) */ -#define LCCR0_Act (LCCR0_PAS*1) /* Active display (TFT) */ -#define LCCR0_DPD (1 << 9) /* Double Pixel Data (monochrome) */ -#define LCCR0_4PixMono (LCCR0_DPD*0) /* 4-Pixel/clock Monochrome display */ -#define LCCR0_8PixMono (LCCR0_DPD*1) /* 8-Pixel/clock Monochrome display */ -#define LCCR0_DIS (1 << 10) /* LCD Disable */ -#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ -#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ -#define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ -#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ -#define LCCR0_LCDT (1 << 22) /* LCD panel type */ -#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ -#define LCCR0_CMDIM (1 << 24) /* Command interrupt mask */ -#define LCCR0_OUC (1 << 25) /* Overlay Underlay control bit */ -#define LCCR0_LDDALT (1 << 26) /* LDD alternate mapping control */ - -#define LCCR1_PPL Fld (10, 0) /* Pixels Per Line - 1 */ -#define LCCR1_DisWdth(Pixel) (((Pixel) - 1) << FShft (LCCR1_PPL)) - -#define LCCR1_HSW Fld (6, 10) /* Horizontal Synchronization */ -#define LCCR1_HorSnchWdth(Tpix) (((Tpix) - 1) << FShft (LCCR1_HSW)) - -#define LCCR1_ELW Fld (8, 16) /* End-of-Line pixel clock Wait - 1 */ -#define LCCR1_EndLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_ELW)) - -#define LCCR1_BLW Fld (8, 24) /* Beginning-of-Line pixel clock */ -#define LCCR1_BegLnDel(Tpix) (((Tpix) - 1) << FShft (LCCR1_BLW)) - -#define LCCR2_LPP Fld (10, 0) /* Line Per Panel - 1 */ -#define LCCR2_DisHght(Line) (((Line) - 1) << FShft (LCCR2_LPP)) - -#define LCCR2_VSW Fld (6, 10) /* Vertical Synchronization pulse - 1 */ -#define LCCR2_VrtSnchWdth(Tln) (((Tln) - 1) << FShft (LCCR2_VSW)) - -#define LCCR2_EFW Fld (8, 16) /* End-of-Frame line clock Wait */ -#define LCCR2_EndFrmDel(Tln) ((Tln) << FShft (LCCR2_EFW)) - -#define LCCR2_BFW Fld (8, 24) /* Beginning-of-Frame line clock */ -#define LCCR2_BegFrmDel(Tln) ((Tln) << FShft (LCCR2_BFW)) - -#define LCCR3_API (0xf << 16) /* AC Bias pin trasitions per interrupt */ -#define LCCR3_API_S 16 -#define LCCR3_VSP (1 << 20) /* vertical sync polarity */ -#define LCCR3_HSP (1 << 21) /* horizontal sync polarity */ -#define LCCR3_PCP (1 << 22) /* Pixel Clock Polarity (L_PCLK) */ -#define LCCR3_PixRsEdg (LCCR3_PCP*0) /* Pixel clock Rising-Edge */ -#define LCCR3_PixFlEdg (LCCR3_PCP*1) /* Pixel clock Falling-Edge */ - -#define LCCR3_OEP (1 << 23) /* Output Enable Polarity */ -#define LCCR3_OutEnH (LCCR3_OEP*0) /* Output Enable active High */ -#define LCCR3_OutEnL (LCCR3_OEP*1) /* Output Enable active Low */ - -#define LCCR3_DPC (1 << 27) /* double pixel clock mode */ -#define LCCR3_PCD Fld (8, 0) /* Pixel Clock Divisor */ -#define LCCR3_PixClkDiv(Div) (((Div) << FShft (LCCR3_PCD))) - -#define LCCR3_ACB Fld (8, 8) /* AC Bias */ -#define LCCR3_Acb(Acb) (((Acb) << FShft (LCCR3_ACB))) - -#define LCCR3_HorSnchH (LCCR3_HSP*0) /* HSP Active High */ -#define LCCR3_HorSnchL (LCCR3_HSP*1) /* HSP Active Low */ - -#define LCCR3_VrtSnchH (LCCR3_VSP*0) /* VSP Active High */ -#define LCCR3_VrtSnchL (LCCR3_VSP*1) /* VSP Active Low */ - -#define LCCR5_IUM(x) (1 << ((x) + 23)) /* input underrun mask */ -#define LCCR5_BSM(x) (1 << ((x) + 15)) /* branch mask */ -#define LCCR5_EOFM(x) (1 << ((x) + 7)) /* end of frame mask */ -#define LCCR5_SOFM(x) (1 << ((x) + 0)) /* start of frame mask */ - -#define LCSR_LDD (1 << 0) /* LCD Disable Done */ -#define LCSR_SOF (1 << 1) /* Start of frame */ -#define LCSR_BER (1 << 2) /* Bus error */ -#define LCSR_ABC (1 << 3) /* AC Bias count */ -#define LCSR_IUL (1 << 4) /* input FIFO underrun Lower panel */ -#define LCSR_IUU (1 << 5) /* input FIFO underrun Upper panel */ -#define LCSR_OU (1 << 6) /* output FIFO underrun */ -#define LCSR_QD (1 << 7) /* quick disable */ -#define LCSR_EOF (1 << 8) /* end of frame */ -#define LCSR_BS (1 << 9) /* branch status */ -#define LCSR_SINT (1 << 10) /* subsequent interrupt */ -#define LCSR_RD_ST (1 << 11) /* read status */ -#define LCSR_CMD_INT (1 << 12) /* command interrupt */ - -#define LCSR1_IU(x) (1 << ((x) + 23)) /* Input FIFO underrun */ -#define LCSR1_BS(x) (1 << ((x) + 15)) /* Branch Status */ -#define LCSR1_EOF(x) (1 << ((x) + 7)) /* End of Frame Status */ -#define LCSR1_SOF(x) (1 << ((x) - 1)) /* Start of Frame Status */ - -#define LDCMD_PAL (1 << 26) /* instructs DMA to load palette buffer */ - -/* overlay control registers */ -#define OVLxC1_PPL(x) ((((x) - 1) & 0x3ff) << 0) /* Pixels Per Line */ -#define OVLxC1_LPO(x) ((((x) - 1) & 0x3ff) << 10) /* Number of Lines */ -#define OVLxC1_BPP(x) (((x) & 0xf) << 20) /* Bits Per Pixel */ -#define OVLxC1_OEN (1 << 31) /* Enable bit for Overlay */ -#define OVLxC2_XPOS(x) (((x) & 0x3ff) << 0) /* Horizontal Position */ -#define OVLxC2_YPOS(x) (((x) & 0x3ff) << 10) /* Vertical Position */ -#define OVL2C2_PFOR(x) (((x) & 0x7) << 20) /* Pixel Format */ - -/* smartpanel related */ -#define PRSR_DATA(x) ((x) & 0xff) /* Panel Data */ -#define PRSR_A0 (1 << 8) /* Read Data Source */ -#define PRSR_ST_OK (1 << 9) /* Status OK */ -#define PRSR_CON_NT (1 << 10) /* Continue to Next Command */ - -#define SMART_CMD_A0 (0x1 << 8) -#define SMART_CMD_READ_STATUS_REG (0x0 << 9) -#define SMART_CMD_READ_FRAME_BUFFER ((0x0 << 9) | SMART_CMD_A0) -#define SMART_CMD_WRITE_COMMAND (0x1 << 9) -#define SMART_CMD_WRITE_DATA ((0x1 << 9) | SMART_CMD_A0) -#define SMART_CMD_WRITE_FRAME ((0x2 << 9) | SMART_CMD_A0) -#define SMART_CMD_WAIT_FOR_VSYNC (0x3 << 9) -#define SMART_CMD_NOOP (0x4 << 9) -#define SMART_CMD_INTERRUPT (0x5 << 9) - -#define SMART_CMD(x) (SMART_CMD_WRITE_COMMAND | ((x) & 0xff)) -#define SMART_DAT(x) (SMART_CMD_WRITE_DATA | ((x) & 0xff)) - -/* SMART_DELAY() is introduced for software controlled delay primitive which - * can be inserted between command sequences, unused command 0x6 is used here - * and delay ranges from 0ms ~ 255ms - */ -#define SMART_CMD_DELAY (0x6 << 9) -#define SMART_DELAY(ms) (SMART_CMD_DELAY | ((ms) & 0xff)) -#endif /* __ASM_ARCH_REGS_LCD_H */ diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h deleted file mode 100644 index c36306064eee..000000000000 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ /dev/null @@ -1,71 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * arch/arm/mach-pxa/include/mach/uncompress.h - * - * Author: Nicolas Pitre - * Copyright: (C) 2001 MontaVista Software Inc. - */ - -#include <linux/serial_reg.h> -#include <asm/mach-types.h> - -#define FFUART_BASE (0x40100000) -#define BTUART_BASE (0x40200000) -#define STUART_BASE (0x40700000) - -unsigned long uart_base; -unsigned int uart_shift; -unsigned int uart_is_pxa; - -static inline unsigned char uart_read(int offset) -{ - return *(volatile unsigned char *)(uart_base + (offset << uart_shift)); -} - -static inline void uart_write(unsigned char val, int offset) -{ - *(volatile unsigned char *)(uart_base + (offset << uart_shift)) = val; -} - -static inline int uart_is_enabled(void) -{ - /* assume enabled by default for non-PXA uarts */ - return uart_is_pxa ? uart_read(UART_IER) & UART_IER_UUE : 1; -} - -static inline void putc(char c) -{ - if (!uart_is_enabled()) - return; - - while (!(uart_read(UART_LSR) & UART_LSR_THRE)) - barrier(); - - uart_write(c, UART_TX); -} - -/* - * This does not append a newline - */ -static inline void flush(void) -{ -} - -static inline void arch_decomp_setup(void) -{ - /* initialize to default */ - uart_base = FFUART_BASE; - uart_shift = 2; - uart_is_pxa = 1; - - if (machine_is_littleton() || machine_is_intelmote2() - || machine_is_csb726() || machine_is_stargate2() - || machine_is_cm_x300() || machine_is_balloon3()) - uart_base = STUART_BASE; - - if (machine_is_arcom_zeus()) { - uart_base = 0x10000000; /* nCS4 */ - uart_shift = 1; - uart_is_pxa = 0; - } -} diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 74efc3ab595f..96f33ef1d9ea 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -17,13 +17,14 @@ #include <linux/irq.h> #include <linux/of_address.h> #include <linux/of_irq.h> +#include <linux/soc/pxa/cpu.h> #include <asm/exception.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "irqs.h" #include "generic.h" +#include "pxa-regs.h" #define ICIP (0x000) #define ICMR (0x004) diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/irqs.h index 22bf536a462d..22bf536a462d 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/irqs.h diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index 793f61375ee8..98423a96f440 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -31,7 +31,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/mach/arch.h> @@ -195,7 +194,6 @@ static struct pxa2xx_spi_controller littleton_spi_info = { static struct pxa2xx_spi_chip littleton_tdo24m_chip = { .rx_threshold = 1, .tx_threshold = 1, - .gpio_cs = LITTLETON_GPIO_LCD_CS, }; static struct spi_board_info littleton_spi_devices[] __initdata = { @@ -208,8 +206,17 @@ static struct spi_board_info littleton_spi_devices[] __initdata = { }, }; +static struct gpiod_lookup_table littleton_spi_gpio_table = { + .dev_id = "spi2", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", LITTLETON_GPIO_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW), + { }, + }, +}; + static void __init littleton_init_spi(void) { + gpiod_add_lookup_table(&littleton_spi_gpio_table); pxa2xx_set_spi_info(2, &littleton_spi_info); spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices)); } diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 6fc40bc06910..0e4123c5fd42 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -28,7 +28,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h> @@ -39,12 +38,13 @@ #include "pxa27x.h" #include "lpd270.h" -#include <mach/audio.h> +#include "addr-map.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e2411971422d..4f0944f3b262 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -34,7 +34,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h> @@ -46,14 +45,14 @@ #include <asm/hardware/sa1111.h> #include "pxa25x.h" -#include <mach/audio.h> -#include <mach/lubbock.h> +#include <linux/platform_data/asoc-pxa.h> +#include "lubbock.h" #include "udc.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include "pm.h" -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -132,6 +131,13 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = { // no D+ pullup; lubbock can't connect/disconnect in software }; +static struct resource lubbock_udc_resources[] = { + DEFINE_RES_MEM(0x40600000, 0x10000), + DEFINE_RES_IRQ(IRQ_USB), + DEFINE_RES_IRQ(LUBBOCK_USB_IRQ), + DEFINE_RES_IRQ(LUBBOCK_USB_DISC_IRQ), +}; + /* GPIOs for SA1111 PCMCIA */ static struct gpiod_lookup_table sa1111_pcmcia_gpio_table = { .dev_id = "1800", @@ -497,6 +503,9 @@ static void __init lubbock_init(void) lubbock_init_pcmcia(); clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL); + /* lubbock has two extra IRQs */ + pxa25x_device_udc.resource = lubbock_udc_resources; + pxa25x_device_udc.num_resources = ARRAY_SIZE(lubbock_udc_resources); pxa_set_udc_info(&udc_info); pxa_set_fb_info(NULL, &sharp_lm8v31); pxa_set_mci_info(&lubbock_mci_platform_data); diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/lubbock.h index a3af4a2f9446..55cf91e22ae2 100644 --- a/arch/arm/mach-pxa/include/mach/lubbock.h +++ b/arch/arm/mach-pxa/lubbock.h @@ -1,13 +1,11 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/mach-pxa/include/mach/lubbock.h - * * Author: Nicolas Pitre * Created: Jun 15, 2001 * Copyright: MontaVista Software Inc. */ -#include <mach/irqs.h> +#include "irqs.h" #define LUBBOCK_ETH_PHYS PXA_CS3_PHYS diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index cd9fa465b9b2..0827ebca1d38 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -29,13 +29,13 @@ #include <linux/regulator/machine.h> #include <linux/platform_data/i2c-pxa.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/system_info.h> #include "pxa27x.h" -#include <mach/magician.h> +#include "addr-map.h" +#include "magician.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> @@ -53,6 +53,7 @@ #include <linux/spi/spi.h> #include <linux/spi/pxa2xx_spi.h> #include <linux/spi/ads7846.h> +#include <sound/uda1380.h> static unsigned long magician_pin_config[] __initdata = { @@ -681,7 +682,7 @@ static struct platform_device bq24022 = { static struct gpiod_lookup_table bq24022_gpiod_table = { .dev_id = "gpio-regulator", .table = { - GPIO_LOOKUP("gpio-pxa", EGPIO_MAGICIAN_BQ24022_ISET2, + GPIO_LOOKUP("htc-egpio-0", EGPIO_MAGICIAN_BQ24022_ISET2 - MAGICIAN_EGPIO_BASE, NULL, GPIO_ACTIVE_HIGH), GPIO_LOOKUP("gpio-pxa", GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, "enable", GPIO_ACTIVE_LOW), @@ -899,6 +900,53 @@ static struct platform_device strataflash = { }; /* + * audio support + */ +static struct uda1380_platform_data uda1380_info = { + .gpio_power = EGPIO_MAGICIAN_CODEC_POWER, + .gpio_reset = EGPIO_MAGICIAN_CODEC_RESET, + .dac_clk = UDA1380_DAC_CLK_WSPLL, +}; + +static struct i2c_board_info magician_audio_i2c_board_info[] = { + { + I2C_BOARD_INFO("uda1380", 0x18), + .platform_data = &uda1380_info, + }, +}; + +static struct gpiod_lookup_table magician_audio_gpio_table = { + .dev_id = "magician-audio", + .table = { + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_SPK_POWER - MAGICIAN_EGPIO_BASE, + "SPK_POWER", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_EP_POWER - MAGICIAN_EGPIO_BASE, + "EP_POWER", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_MIC_POWER - MAGICIAN_EGPIO_BASE, + "MIC_POWER", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_IN_SEL0 - MAGICIAN_EGPIO_BASE, + "IN_SEL0", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("htc-egpio-0", + EGPIO_MAGICIAN_IN_SEL1 - MAGICIAN_EGPIO_BASE, + "IN_SEL1", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static void magician_audio_init(void) +{ + i2c_register_board_info(0, + ARRAY_AND_SIZE(magician_audio_i2c_board_info)); + + gpiod_add_lookup_table(&magician_audio_gpio_table); + platform_device_register_simple("magician-audio", -1, NULL, 0); +} + +/* * PXA I2C main controller */ @@ -938,8 +986,6 @@ struct pxa2xx_spi_chip tsc2046_chip_info = { .tx_threshold = 1, .rx_threshold = 2, .timeout = 64, - /* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */ - .gpio_cs = GPIO14_MAGICIAN_TSC2046_CS, }; static struct pxa2xx_spi_controller magician_spi_info = { @@ -947,6 +993,15 @@ static struct pxa2xx_spi_controller magician_spi_info = { .enable_dma = 1, }; +static struct gpiod_lookup_table magician_spi_gpio_table = { + .dev_id = "spi2", + .table = { + /* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */ + GPIO_LOOKUP_IDX("gpio-pxa", GPIO14_MAGICIAN_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct spi_board_info ads7846_spi_board_info[] __initdata = { { .modalias = "ads7846", @@ -1031,6 +1086,7 @@ static void __init magician_init(void) } else pr_err("LCD detection: CPLD mapping failed\n"); + gpiod_add_lookup_table(&magician_spi_gpio_table); pxa2xx_set_spi_info(2, &magician_spi_info); spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info)); @@ -1040,6 +1096,8 @@ static void __init magician_init(void) gpiod_add_lookup_table(&bq24022_gpiod_table); gpiod_add_lookup_table(&gpio_vbus_gpiod_table); platform_add_devices(ARRAY_AND_SIZE(devices)); + + magician_audio_init(); } MACHINE_START(MAGICIAN, "HTC Magician") diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/magician.h index 7d3af561af6f..e1e4f9f6b22b 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/magician.h @@ -9,7 +9,7 @@ #define _MAGICIAN_H_ #include <linux/gpio.h> -#include <mach/irqs.h> +#include "irqs.h" /* * PXA GPIOs diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index d237bd030238..fd386f1c414c 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -35,7 +35,6 @@ #include <asm/setup.h> #include <asm/memory.h> #include <asm/mach-types.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <linux/sizes.h> @@ -45,14 +44,15 @@ #include <asm/mach/flash.h> #include "pxa27x.h" -#include <mach/mainstone.h> -#include <mach/audio.h> +#include "mainstone.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> -#include <mach/smemc.h> +#include "addr-map.h" +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -548,6 +548,14 @@ static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = { }, }; +static struct gpiod_lookup_table mainstone_wm97xx_gpio_table = { + .dev_id = "wm97xx-touch", + .table = { + GPIO_LOOKUP("gpio-pxa", 4, "touch", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init mainstone_init(void) { int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */ @@ -562,6 +570,7 @@ static void __init mainstone_init(void) "mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL, NULL, mst_pcmcia1_irqs); gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table); + gpiod_add_lookup_table(&mainstone_wm97xx_gpio_table); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/mainstone.h index 1698f2ffd7c7..f116c56cf5d9 100644 --- a/arch/arm/mach-pxa/include/mach/mainstone.h +++ b/arch/arm/mach-pxa/mainstone.h @@ -1,7 +1,5 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * arch/arm/mach-pxa/include/mach/mainstone.h - * * Author: Nicolas Pitre * Created: Nov 14, 2002 * Copyright: MontaVista Software Inc. @@ -10,7 +8,7 @@ #ifndef ASM_ARCH_MAINSTONE_H #define ASM_ARCH_MAINSTONE_H -#include <mach/irqs.h> +#include "irqs.h" #define MST_ETH_PHYS PXA_CS4_PHYS diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index 6a5451b186c2..57b0782880de 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -16,8 +16,9 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/syscore_ops.h> +#include <linux/soc/pxa/cpu.h> -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "mfp-pxa2xx.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.h b/arch/arm/mach-pxa/mfp-pxa2xx.h index 980145e7ee99..683a3ea5f154 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/mfp-pxa2xx.h @@ -2,7 +2,7 @@ #ifndef __ASM_ARCH_MFP_PXA2XX_H #define __ASM_ARCH_MFP_PXA2XX_H -#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h> /* * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx: diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c index 56114df9700d..d16ab7451efe 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.c +++ b/arch/arm/mach-pxa/mfp-pxa3xx.c @@ -16,9 +16,8 @@ #include <linux/io.h> #include <linux/syscore_ops.h> -#include <mach/hardware.h> #include "mfp-pxa3xx.h" -#include <mach/pxa3xx-regs.h> +#include "pxa3xx-regs.h" #ifdef CONFIG_PM /* diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.h b/arch/arm/mach-pxa/mfp-pxa3xx.h index cdd830926d1c..81fec4fa5a0f 100644 --- a/arch/arm/mach-pxa/mfp-pxa3xx.h +++ b/arch/arm/mach-pxa/mfp-pxa3xx.h @@ -2,7 +2,7 @@ #ifndef __ASM_ARCH_MFP_PXA3XX_H #define __ASM_ARCH_MFP_PXA3XX_H -#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h> #define MFPR_BASE (0x40e10000) diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/mfp.h index dbb961fb570e..7e0879bd4102 100644 --- a/arch/arm/mach-pxa/include/mach/mfp.h +++ b/arch/arm/mach-pxa/mfp.h @@ -13,6 +13,6 @@ #ifndef __ASM_ARCH_MFP_H #define __ASM_ARCH_MFP_H -#include <plat/mfp.h> +#include <linux/soc/pxa/mfp.h> #endif /* __ASM_ARCH_MFP_H */ diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index a79f296e81e0..d08f962ffb04 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -41,8 +41,8 @@ #include "udc.h" #include "pxa27x-udc.h" #include <linux/platform_data/media/camera-pxa.h> -#include <mach/audio.h> -#include <mach/smemc.h> +#include <linux/platform_data/asoc-pxa.h> +#include "smemc.h" #include "mioa701.h" diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c index fde386f6cffe..35546b59c88e 100644 --- a/arch/arm/mach-pxa/mxm8x10.c +++ b/arch/arm/mach-pxa/mxm8x10.c @@ -26,6 +26,7 @@ #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> +#include <linux/platform_data/asoc-pxa.h> #include "pxa320.h" #include "mxm8x10.h" @@ -356,14 +357,9 @@ void __init mxm_8x10_usb_host_init(void) pxa_set_ohci_info(&mxm_8x10_ohci_platform_data); } -/* AC97 Sound Support */ -static struct platform_device mxm_8x10_ac97_device = { - .name = "pxa2xx-ac97" -}; - void __init mxm_8x10_ac97_init(void) { - platform_device_register(&mxm_8x10_ac97_device); + pxa_set_ac97_info(NULL); } /* NAND flash Support */ diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c index 6230381a7ca0..1a8d25eecac3 100644 --- a/arch/arm/mach-pxa/palm27x.c +++ b/arch/arm/mach-pxa/palm27x.c @@ -25,7 +25,7 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/palmld-pcmcia.c b/arch/arm/mach-pxa/palmld-pcmcia.c new file mode 100644 index 000000000000..720294a50864 --- /dev/null +++ b/arch/arm/mach-pxa/palmld-pcmcia.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_palmld.c + * + * Driver for Palm LifeDrive PCMCIA + * + * Copyright (C) 2006 Alex Osborne <ato@meshy.org> + * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include <pcmcia/soc_common.h> + +#include "palmld.h" + +static struct gpio palmld_pcmcia_gpios[] = { + { GPIO_NR_PALMLD_PCMCIA_POWER, GPIOF_INIT_LOW, "PCMCIA Power" }, + { GPIO_NR_PALMLD_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" }, +}; + +static int palmld_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(palmld_pcmcia_gpios, + ARRAY_SIZE(palmld_pcmcia_gpios)); + + skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMLD_PCMCIA_READY; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + + return ret; +} + +static void palmld_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(palmld_pcmcia_gpios, ARRAY_SIZE(palmld_pcmcia_gpios)); +} + +static void palmld_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->detect = 1; /* always inserted */ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int palmld_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + gpio_set_value(GPIO_NR_PALMLD_PCMCIA_POWER, 1); + gpio_set_value(GPIO_NR_PALMLD_PCMCIA_RESET, + !!(state->flags & SS_RESET)); + + return 0; +} + +static struct pcmcia_low_level palmld_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 1, + .nr = 1, + + .hw_init = palmld_pcmcia_hw_init, + .hw_shutdown = palmld_pcmcia_hw_shutdown, + + .socket_state = palmld_pcmcia_socket_state, + .configure_socket = palmld_pcmcia_configure_socket, +}; + +static struct platform_device *palmld_pcmcia_device; + +static int __init palmld_pcmcia_init(void) +{ + int ret; + + if (!machine_is_palmld()) + return -ENODEV; + + palmld_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!palmld_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(palmld_pcmcia_device, &palmld_pcmcia_ops, + sizeof(palmld_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(palmld_pcmcia_device); + + if (ret) + platform_device_put(palmld_pcmcia_device); + + return ret; +} + +static void __exit palmld_pcmcia_exit(void) +{ + platform_device_unregister(palmld_pcmcia_device); +} + +module_init(palmld_pcmcia_init); +module_exit(palmld_pcmcia_exit); + +MODULE_AUTHOR("Alex Osborne <ato@meshy.org>," + " Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Palm LifeDrive"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 5f73716a77f0..32308c63884e 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -29,8 +29,8 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> -#include <mach/palmld.h> +#include "palmld.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> @@ -279,9 +279,15 @@ static inline void palmld_leds_init(void) {} * HDD ******************************************************************************/ #if defined(CONFIG_PATA_PALMLD) || defined(CONFIG_PATA_PALMLD_MODULE) +static struct resource palmld_ide_resources[] = { + DEFINE_RES_MEM(PALMLD_IDE_PHYS, 0x1000), +}; + static struct platform_device palmld_ide_device = { - .name = "pata_palmld", - .id = -1, + .name = "pata_palmld", + .id = -1, + .resource = palmld_ide_resources, + .num_resources = ARRAY_SIZE(palmld_ide_resources), }; static struct gpiod_lookup_table palmld_ide_gpio_table = { @@ -341,6 +347,14 @@ static struct gpiod_lookup_table palmld_mci_gpio_table = { }, }; +static struct gpiod_lookup_table palmld_wm97xx_touch_gpio_table = { + .dev_id = "wm97xx-touch", + .table = { + GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init palmld_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config)); @@ -349,6 +363,7 @@ static void __init palmld_init(void) pxa_set_stuart_info(NULL); palm27x_mmc_init(&palmld_mci_gpio_table); + gpiod_add_lookup_table(&palmld_wm97xx_touch_gpio_table); palm27x_pm_init(PALMLD_STR_BASE); palm27x_lcd_init(-1, &palm_320x480_lcd_mode); palm27x_irda_init(GPIO_NR_PALMLD_IR_DISABLE); diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/palmld.h index 99a6d8b3a1e3..99a6d8b3a1e3 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/palmld.h diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 7c7cbb4e677e..463b62ec1b01 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -29,7 +29,7 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmt5.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> @@ -190,6 +190,14 @@ static struct gpiod_lookup_table palmt5_mci_gpio_table = { }, }; +static struct gpiod_lookup_table palmt5_wm97xx_touch_gpio_table = { + .dev_id = "wm97xx-touch", + .table = { + GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init palmt5_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config)); @@ -198,6 +206,7 @@ static void __init palmt5_init(void) pxa_set_stuart_info(NULL); palm27x_mmc_init(&palmt5_mci_gpio_table); + gpiod_add_lookup_table(&palmt5_wm97xx_touch_gpio_table); palm27x_pm_init(PALMT5_STR_BASE); palm27x_lcd_init(-1, &palm_320x480_lcd_mode); palm27x_udc_init(GPIO_NR_PALMT5_USB_DETECT_N, diff --git a/arch/arm/mach-pxa/palmt5.h b/arch/arm/mach-pxa/palmt5.h index 1fb1da7c8da3..cf84aedca717 100644 --- a/arch/arm/mach-pxa/palmt5.h +++ b/arch/arm/mach-pxa/palmt5.h @@ -11,7 +11,7 @@ #ifndef _INCLUDE_PALMT5_H_ #define _INCLUDE_PALMT5_H_ -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /** HERE ARE GPIOs **/ diff --git a/arch/arm/mach-pxa/palmtc-pcmcia.c b/arch/arm/mach-pxa/palmtc-pcmcia.c new file mode 100644 index 000000000000..8e3f382343fe --- /dev/null +++ b/arch/arm/mach-pxa/palmtc-pcmcia.c @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_palmtc.c + * + * Driver for Palm Tungsten|C PCMCIA + * + * Copyright (C) 2008 Alex Osborne <ato@meshy.org> + * Copyright (C) 2009-2011 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> + +#include <asm/mach-types.h> +#include "palmtc.h" +#include <pcmcia/soc_common.h> + +static struct gpio palmtc_pcmcia_gpios[] = { + { GPIO_NR_PALMTC_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" }, + { GPIO_NR_PALMTC_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" }, + { GPIO_NR_PALMTC_PCMCIA_POWER3, GPIOF_INIT_LOW, "PCMCIA Power 3" }, + { GPIO_NR_PALMTC_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" }, + { GPIO_NR_PALMTC_PCMCIA_PWRREADY, GPIOF_IN, "PCMCIA Power Ready" }, +}; + +static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(palmtc_pcmcia_gpios, + ARRAY_SIZE(palmtc_pcmcia_gpios)); + + skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTC_PCMCIA_READY; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + + return ret; +} + +static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(palmtc_pcmcia_gpios, ARRAY_SIZE(palmtc_pcmcia_gpios)); +} + +static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->detect = 1; /* always inserted */ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int palmtc_wifi_powerdown(void) +{ + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1); + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0); + mdelay(40); + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0); + return 0; +} + +static int palmtc_wifi_powerup(void) +{ + int timeout = 50; + + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1); + mdelay(50); + + /* Power up the card, 1.8V first, after a while 3.3V */ + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1); + mdelay(100); + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1); + + /* Wait till the card is ready */ + while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) && + timeout) { + mdelay(1); + timeout--; + } + + /* Power down the WiFi in case of error */ + if (!timeout) { + palmtc_wifi_powerdown(); + return 1; + } + + /* Reset the card */ + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1); + mdelay(20); + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0); + mdelay(25); + + gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0); + + return 0; +} + +static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + int ret = 1; + + if (state->Vcc == 0) + ret = palmtc_wifi_powerdown(); + else if (state->Vcc == 33) + ret = palmtc_wifi_powerup(); + + return ret; +} + +static struct pcmcia_low_level palmtc_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 1, + + .hw_init = palmtc_pcmcia_hw_init, + .hw_shutdown = palmtc_pcmcia_hw_shutdown, + + .socket_state = palmtc_pcmcia_socket_state, + .configure_socket = palmtc_pcmcia_configure_socket, +}; + +static struct platform_device *palmtc_pcmcia_device; + +static int __init palmtc_pcmcia_init(void) +{ + int ret; + + if (!machine_is_palmtc()) + return -ENODEV; + + palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!palmtc_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops, + sizeof(palmtc_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(palmtc_pcmcia_device); + + if (ret) + platform_device_put(palmtc_pcmcia_device); + + return ret; +} + +static void __exit palmtc_pcmcia_exit(void) +{ + platform_device_unregister(palmtc_pcmcia_device); +} + +module_init(palmtc_pcmcia_init); +module_exit(palmtc_pcmcia_exit); + +MODULE_AUTHOR("Alex Osborne <ato@meshy.org>," + " Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 455cb8ccaf26..3054ffa397ad 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -29,8 +29,8 @@ #include <asm/mach/map.h> #include "pxa25x.h" -#include <mach/audio.h> -#include <mach/palmtc.h> +#include <linux/platform_data/asoc-pxa.h> +#include "palmtc.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/palmtc.h index 9257a02c46e5..9257a02c46e5 100644 --- a/arch/arm/mach-pxa/include/mach/palmtc.h +++ b/arch/arm/mach-pxa/palmtc.h diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index a2b10db4aacc..fedac670a8af 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -29,7 +29,7 @@ #include <asm/mach/map.h> #include "pxa25x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmte2.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 2bf0f7f3ea24..238a31f32cba 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -29,7 +29,7 @@ #include "pxa27x.h" #include "pxa27x-udc.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmtreo.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> @@ -37,7 +37,7 @@ #include <linux/platform_data/keypad-pxa27x.h> #include "udc.h" #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include <linux/platform_data/asoc-palm27x.h> #include <linux/platform_data/media/camera-pxa.h> #include "palm27x.h" diff --git a/arch/arm/mach-pxa/palmtx-pcmcia.c b/arch/arm/mach-pxa/palmtx-pcmcia.c new file mode 100644 index 000000000000..8c2aaad93043 --- /dev/null +++ b/arch/arm/mach-pxa/palmtx-pcmcia.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_palmtx.c + * + * Driver for Palm T|X PCMCIA + * + * Copyright (C) 2007-2011 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <asm/mach-types.h> +#include "palmtx.h" +#include <pcmcia/soc_common.h> + +static struct gpio palmtx_pcmcia_gpios[] = { + { GPIO_NR_PALMTX_PCMCIA_POWER1, GPIOF_INIT_LOW, "PCMCIA Power 1" }, + { GPIO_NR_PALMTX_PCMCIA_POWER2, GPIOF_INIT_LOW, "PCMCIA Power 2" }, + { GPIO_NR_PALMTX_PCMCIA_RESET, GPIOF_INIT_HIGH,"PCMCIA Reset" }, +}; + +static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + ret = gpio_request_array(palmtx_pcmcia_gpios, + ARRAY_SIZE(palmtx_pcmcia_gpios)); + + skt->stat[SOC_STAT_RDY].gpio = GPIO_NR_PALMTX_PCMCIA_READY; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + + return ret; +} + +static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + gpio_free_array(palmtx_pcmcia_gpios, ARRAY_SIZE(palmtx_pcmcia_gpios)); +} + +static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->detect = 1; /* always inserted */ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int +palmtx_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER1, 1); + gpio_set_value(GPIO_NR_PALMTX_PCMCIA_POWER2, 1); + gpio_set_value(GPIO_NR_PALMTX_PCMCIA_RESET, + !!(state->flags & SS_RESET)); + + return 0; +} + +static struct pcmcia_low_level palmtx_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 1, + + .hw_init = palmtx_pcmcia_hw_init, + .hw_shutdown = palmtx_pcmcia_hw_shutdown, + + .socket_state = palmtx_pcmcia_socket_state, + .configure_socket = palmtx_pcmcia_configure_socket, +}; + +static struct platform_device *palmtx_pcmcia_device; + +static int __init palmtx_pcmcia_init(void) +{ + int ret; + + if (!machine_is_palmtx()) + return -ENODEV; + + palmtx_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!palmtx_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(palmtx_pcmcia_device, &palmtx_pcmcia_ops, + sizeof(palmtx_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(palmtx_pcmcia_device); + + if (ret) + platform_device_put(palmtx_pcmcia_device); + + return ret; +} + +static void __exit palmtx_pcmcia_exit(void) +{ + platform_device_unregister(palmtx_pcmcia_device); +} + +module_init(palmtx_pcmcia_init); +module_exit(palmtx_pcmcia_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Palm T|X"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 07332c92c9f7..c0d0762540ab 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -32,8 +32,8 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> -#include <mach/palmtx.h> +#include <linux/platform_data/asoc-pxa.h> +#include "palmtx.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/irda-pxaficp.h> @@ -345,6 +345,14 @@ static struct gpiod_lookup_table palmtx_mci_gpio_table = { }, }; +static struct gpiod_lookup_table palmtx_wm97xx_touch_gpio_table = { + .dev_id = "wm97xx-touch", + .table = { + GPIO_LOOKUP("gpio-pxa", 27, "touch", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init palmtx_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config)); @@ -353,6 +361,7 @@ static void __init palmtx_init(void) pxa_set_stuart_info(NULL); palm27x_mmc_init(&palmtx_mci_gpio_table); + gpiod_add_lookup_table(&palmtx_wm97xx_touch_gpio_table); palm27x_pm_init(PALMTX_STR_BASE); palm27x_lcd_init(-1, &palm_320x480_lcd_mode); palm27x_udc_init(GPIO_NR_PALMTX_USB_DETECT_N, diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/palmtx.h index ec88abf0fc6c..ec88abf0fc6c 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/palmtx.h diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index b4a5fe02a0af..66e8fe6f1661 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -34,7 +34,7 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include "palmz72.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/pcm027.h b/arch/arm/mach-pxa/pcm027.h index 0c4ab636ce4e..58ade4ad6ba3 100644 --- a/arch/arm/mach-pxa/pcm027.h +++ b/arch/arm/mach-pxa/pcm027.h @@ -10,7 +10,7 @@ * Definitions of CPU card resources only */ -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* phyCORE-PXA270 (PCM027) Interrupts */ #define PCM027_IRQ(x) (IRQ_BOARD_START + (x)) diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c index 8dfcc366d0fe..33a9d2eeca1c 100644 --- a/arch/arm/mach-pxa/pcm990-baseboard.c +++ b/arch/arm/mach-pxa/pcm990-baseboard.c @@ -26,7 +26,7 @@ #include <asm/mach/map.h> #include "pxa27x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pcm990_baseboard.h" diff --git a/arch/arm/mach-pxa/pcm990_baseboard.h b/arch/arm/mach-pxa/pcm990_baseboard.h index 5be11d1b7019..18cf71decb03 100644 --- a/arch/arm/mach-pxa/pcm990_baseboard.h +++ b/arch/arm/mach-pxa/pcm990_baseboard.h @@ -7,7 +7,7 @@ */ #include "pcm027.h" -#include <mach/irqs.h> /* PXA_GPIO_TO_IRQ */ +#include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* * definitions relevant only when the PCM-990 diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 3a4ecc3c8f8b..7772a39430ed 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -30,7 +30,6 @@ #include <linux/mtd/sharpsl.h> #include <linux/memblock.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/irq.h> #include <asm/setup.h> @@ -40,11 +39,13 @@ #include <asm/mach/irq.h> #include "pxa25x.h" -#include <linux/platform_data/mmc-pxamci.h> #include "udc.h" +#include "poodle.h" + +#include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> -#include <mach/poodle.h> #include <linux/platform_data/video-pxafb.h> +#include <linux/platform_data/asoc-poodle.h> #include <asm/hardware/scoop.h> #include <asm/hardware/locomo.h> @@ -156,12 +157,6 @@ static struct scoop_pcmcia_config poodle_pcmcia_config = { EXPORT_SYMBOL(poodle_scoop_device); - -static struct platform_device poodle_audio_device = { - .name = "poodle-audio", - .id = -1, -}; - /* LoCoMo device */ static struct resource locomo_resources[] = { [0] = { @@ -180,7 +175,7 @@ static struct locomo_platform_data locomo_info = { .irq_base = IRQ_BOARD_START, }; -struct platform_device poodle_locomo_device = { +static struct platform_device poodle_locomo_device = { .name = "locomo", .id = 0, .num_resources = ARRAY_SIZE(locomo_resources), @@ -190,13 +185,35 @@ struct platform_device poodle_locomo_device = { }, }; -EXPORT_SYMBOL(poodle_locomo_device); +static struct poodle_audio_platform_data poodle_audio_pdata = { + .locomo_dev = &poodle_locomo_device.dev, + + .gpio_amp_on = POODLE_LOCOMO_GPIO_AMP_ON, + .gpio_mute_l = POODLE_LOCOMO_GPIO_MUTE_L, + .gpio_mute_r = POODLE_LOCOMO_GPIO_MUTE_R, + .gpio_232vcc_on = POODLE_LOCOMO_GPIO_232VCC_ON, + .gpio_jk_b = POODLE_LOCOMO_GPIO_JK_B, +}; + +static struct platform_device poodle_audio_device = { + .name = "poodle-audio", + .id = -1, + .dev.platform_data = &poodle_audio_pdata, +}; #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE) static struct pxa2xx_spi_controller poodle_spi_info = { .num_chipselect = 1, }; +static struct gpiod_lookup_table poodle_spi_gpio_table = { + .dev_id = "pxa2xx-spi.1", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", POODLE_GPIO_TP_CS, "cs", 0, GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct ads7846_platform_data poodle_ads7846_info = { .model = 7846, .vref_delay_usecs = 100, @@ -205,23 +222,19 @@ static struct ads7846_platform_data poodle_ads7846_info = { .gpio_pendown = POODLE_GPIO_TP_INT, }; -static struct pxa2xx_spi_chip poodle_ads7846_chip = { - .gpio_cs = POODLE_GPIO_TP_CS, -}; - static struct spi_board_info poodle_spi_devices[] = { { .modalias = "ads7846", .max_speed_hz = 10000, .bus_num = 1, .platform_data = &poodle_ads7846_info, - .controller_data= &poodle_ads7846_chip, .irq = PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT), }, }; static void __init poodle_init_spi(void) { + gpiod_add_lookup_table(&poodle_spi_gpio_table); pxa2xx_set_spi_info(1, &poodle_spi_info); spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices)); } diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/poodle.h index b56b19351a03..00798b44f204 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/poodle.h @@ -89,6 +89,4 @@ #define POODLE_NR_IRQS (IRQ_BOARD_START + 4) /* 4 for LoCoMo */ -extern struct platform_device poodle_locomo_device; - #endif /* __ASM_ARCH_POODLE_H */ diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c index d32d5c8e966f..5e5d543fdf46 100644 --- a/arch/arm/mach-pxa/pxa-dt.c +++ b/arch/arm/mach-pxa/pxa-dt.c @@ -11,7 +11,7 @@ #include <linux/of_platform.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <mach/irqs.h> +#include "irqs.h" #include "generic.h" diff --git a/arch/arm/mach-pxa/pxa-regs.h b/arch/arm/mach-pxa/pxa-regs.h new file mode 100644 index 000000000000..ba5120c06b8a --- /dev/null +++ b/arch/arm/mach-pxa/pxa-regs.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Author: Nicolas Pitre + * Created: Jun 15, 2001 + * Copyright: MontaVista Software Inc. + */ +#ifndef __ASM_MACH_PXA_REGS_H +#define __ASM_MACH_PXA_REGS_H + +/* + * Workarounds for at least 2 errata so far require this. + * The mapping is set in mach-pxa/generic.c. + */ +#define UNCACHED_PHYS_0 0xfe000000 +#define UNCACHED_PHYS_0_SIZE 0x00100000 + +/* + * Intel PXA2xx internal register mapping: + * + * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff + * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff + * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff + * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff + * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff + * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff + * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff + * + * Note that not all PXA2xx chips implement all those addresses, and the + * kernel only maps the minimum needed range of this mapping. + */ +#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1)) +#define io_p2v(x) IOMEM(0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1)) + +#ifndef __ASSEMBLY__ +# define __REG(x) (*((volatile u32 __iomem *)io_p2v(x))) + +/* With indexed regs we don't want to feed the index through io_p2v() + especially if it is a variable, otherwise horrible code will result. */ +# define __REG2(x,y) \ + (*(volatile u32 __iomem*)((u32)&__REG(x) + (y))) + +# define __PREG(x) (io_v2p((u32)&(x))) + +#else + +# define __REG(x) io_p2v(x) +# define __PREG(x) io_v2p(x) + +#endif + + +#endif diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index 678641ab46e5..6b34d7c169ea 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -26,16 +26,16 @@ #include <linux/irq.h> #include <linux/irqchip.h> #include <linux/platform_data/mmp_dma.h> +#include <linux/soc/pxa/cpu.h> #include <asm/mach/map.h> #include <asm/suspend.h> -#include <mach/hardware.h> -#include <mach/irqs.h> +#include "irqs.h" #include "pxa25x.h" -#include <mach/reset.h> +#include "reset.h" #include "pm.h" -#include <mach/dma.h> -#include <mach/smemc.h> +#include "addr-map.h" +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -240,7 +240,7 @@ static int __init pxa25x_init(void) if (cpu_is_pxa25x()) { - reset_status = RCSR; + pxa_register_wdt(RCSR); pxa25x_init_pm(); diff --git a/arch/arm/mach-pxa/pxa25x.h b/arch/arm/mach-pxa/pxa25x.h index b58d0fbdb4db..eaaa87666324 100644 --- a/arch/arm/mach-pxa/pxa25x.h +++ b/arch/arm/mach-pxa/pxa25x.h @@ -2,9 +2,9 @@ #ifndef __MACH_PXA25x_H #define __MACH_PXA25x_H -#include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> +#include "addr-map.h" +#include "pxa2xx-regs.h" #include "mfp-pxa25x.h" -#include <mach/irqs.h> +#include "irqs.h" #endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/pxa27x-udc.h b/arch/arm/mach-pxa/pxa27x-udc.h index faf73804697f..2d3df3b1cb68 100644 --- a/arch/arm/mach-pxa/pxa27x-udc.h +++ b/arch/arm/mach-pxa/pxa27x-udc.h @@ -2,6 +2,8 @@ #ifndef _ASM_ARCH_PXA27X_UDC_H #define _ASM_ARCH_PXA27X_UDC_H +#include "pxa-regs.h" + #ifdef _ASM_ARCH_PXA25X_UDC_H #error You cannot include both PXA25x and PXA27x UDC support #endif diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index f0ba7ed24cb6..afbf6ace954f 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -23,18 +23,18 @@ #include <linux/irq.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/mmp_dma.h> +#include <linux/soc/pxa/cpu.h> #include <asm/mach/map.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/suspend.h> -#include <mach/irqs.h> +#include "irqs.h" #include "pxa27x.h" -#include <mach/reset.h> +#include "reset.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" -#include <mach/dma.h> -#include <mach/smemc.h> +#include "addr-map.h" +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -337,7 +337,7 @@ static int __init pxa27x_init(void) if (cpu_is_pxa27x()) { - reset_status = RCSR; + pxa_register_wdt(RCSR); pxa27x_init_pm(); diff --git a/arch/arm/mach-pxa/pxa27x.h b/arch/arm/mach-pxa/pxa27x.h index abdc02fb4f03..ede96f3f7214 100644 --- a/arch/arm/mach-pxa/pxa27x.h +++ b/arch/arm/mach-pxa/pxa27x.h @@ -3,10 +3,10 @@ #define __MACH_PXA27x_H #include <linux/suspend.h> -#include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> +#include "addr-map.h" +#include "pxa2xx-regs.h" #include "mfp-pxa27x.h" -#include <mach/irqs.h> +#include "irqs.h" #define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/pxa2xx-regs.h index fa121e135915..0b7eaf6b5813 100644 --- a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h +++ b/arch/arm/mach-pxa/pxa2xx-regs.h @@ -11,7 +11,7 @@ #ifndef __PXA2XX_REGS_H #define __PXA2XX_REGS_H -#include <mach/hardware.h> +#include "pxa-regs.h" /* * Power Manager @@ -136,51 +136,6 @@ #define CKEN io_p2v(0x41300004) /* Clock Enable Register */ #define OSCC io_p2v(0x41300008) /* Oscillator Configuration Register */ -#define CCCR_N_MASK 0x0380 /* Run Mode Frequency to Turbo Mode Frequency Multiplier */ -#define CCCR_M_MASK 0x0060 /* Memory Frequency to Run Mode Frequency Multiplier */ -#define CCCR_L_MASK 0x001f /* Crystal Frequency to Memory Frequency Multiplier */ - -#define CCCR_CPDIS_BIT (31) -#define CCCR_PPDIS_BIT (30) -#define CCCR_LCD_26_BIT (27) -#define CCCR_A_BIT (25) - -#define CCSR_N2_MASK CCCR_N_MASK -#define CCSR_M_MASK CCCR_M_MASK -#define CCSR_L_MASK CCCR_L_MASK -#define CCSR_N2_SHIFT 7 - -#define CKEN_AC97CONF (31) /* AC97 Controller Configuration */ -#define CKEN_CAMERA (24) /* Camera Interface Clock Enable */ -#define CKEN_SSP1 (23) /* SSP1 Unit Clock Enable */ -#define CKEN_MEMC (22) /* Memory Controller Clock Enable */ -#define CKEN_MEMSTK (21) /* Memory Stick Host Controller */ -#define CKEN_IM (20) /* Internal Memory Clock Enable */ -#define CKEN_KEYPAD (19) /* Keypad Interface Clock Enable */ -#define CKEN_USIM (18) /* USIM Unit Clock Enable */ -#define CKEN_MSL (17) /* MSL Unit Clock Enable */ -#define CKEN_LCD (16) /* LCD Unit Clock Enable */ -#define CKEN_PWRI2C (15) /* PWR I2C Unit Clock Enable */ -#define CKEN_I2C (14) /* I2C Unit Clock Enable */ -#define CKEN_FICP (13) /* FICP Unit Clock Enable */ -#define CKEN_MMC (12) /* MMC Unit Clock Enable */ -#define CKEN_USB (11) /* USB Unit Clock Enable */ -#define CKEN_ASSP (10) /* ASSP (SSP3) Clock Enable */ -#define CKEN_USBHOST (10) /* USB Host Unit Clock Enable */ -#define CKEN_OSTIMER (9) /* OS Timer Unit Clock Enable */ -#define CKEN_NSSP (9) /* NSSP (SSP2) Clock Enable */ -#define CKEN_I2S (8) /* I2S Unit Clock Enable */ -#define CKEN_BTUART (7) /* BTUART Unit Clock Enable */ -#define CKEN_FFUART (6) /* FFUART Unit Clock Enable */ -#define CKEN_STUART (5) /* STUART Unit Clock Enable */ -#define CKEN_HWUART (4) /* HWUART Unit Clock Enable */ -#define CKEN_SSP3 (4) /* SSP3 Unit Clock Enable */ -#define CKEN_SSP (3) /* SSP Unit Clock Enable */ -#define CKEN_SSP2 (3) /* SSP2 Unit Clock Enable */ -#define CKEN_AC97 (2) /* AC97 Unit Clock Enable */ -#define CKEN_PWM1 (1) /* PWM1 Clock Enable */ -#define CKEN_PWM0 (0) /* PWM0 Clock Enable */ - #define OSCC_OON (1 << 1) /* 32.768kHz OON (write-once only bit) */ #define OSCC_OOK (1 << 0) /* 32.768kHz OOK (read-only bit) */ diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c index 2d26cd2afbf3..4aafd692c1e8 100644 --- a/arch/arm/mach-pxa/pxa2xx.c +++ b/arch/arm/mach-pxa/pxa2xx.c @@ -12,10 +12,12 @@ #include <linux/device.h> #include <linux/io.h> -#include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "mfp-pxa25x.h" -#include <mach/reset.h> +#include "generic.h" +#include "reset.h" +#include "smemc.h" +#include <linux/soc/pxa/smemc.h> #include <linux/platform_data/irda-pxaficp.h> void pxa2xx_clear_reset_status(unsigned int mask) @@ -51,3 +53,27 @@ void pxa2xx_transceiver_mode(struct device *dev, int mode) BUG(); } EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode); + +#define MDCNFG_DRAC2(mdcnfg) (((mdcnfg) >> 21) & 0x3) +#define MDCNFG_DRAC0(mdcnfg) (((mdcnfg) >> 5) & 0x3) + +int pxa2xx_smemc_get_sdram_rows(void) +{ + static int sdram_rows; + unsigned int drac2 = 0, drac0 = 0; + u32 mdcnfg; + + if (sdram_rows) + return sdram_rows; + + mdcnfg = readl_relaxed(MDCNFG); + + if (mdcnfg & (MDCNFG_DE2 | MDCNFG_DE3)) + drac2 = MDCNFG_DRAC2(mdcnfg); + + if (mdcnfg & (MDCNFG_DE0 | MDCNFG_DE1)) + drac0 = MDCNFG_DRAC0(mdcnfg); + + sdram_rows = 1 << (11 + max(drac0, drac2)); + return sdram_rows; +} diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 7f2f5a6a2263..f77ec118d5b9 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/soc/pxa/cpu.h> #include "pxa300.h" diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index 78abcc741df7..e372e6c118de 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/soc/pxa/cpu.h> #include "pxa320.h" diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/pxa3xx-regs.h index 070f6c74196e..4b11cf81a9e6 100644 --- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h +++ b/arch/arm/mach-pxa/pxa3xx-regs.h @@ -10,7 +10,7 @@ #ifndef __ASM_ARCH_PXA3XX_REGS_H #define __ASM_ARCH_PXA3XX_REGS_H -#include <mach/hardware.h> +#include "pxa-regs.h" /* * Oscillator Configuration Register (OSCC) @@ -131,73 +131,4 @@ #define CKENC __REG(0x41340024) /* C Clock Enable Register */ #define AC97_DIV __REG(0x41340014) /* AC97 clock divisor value register */ -#define ACCR_XPDIS (1 << 31) /* Core PLL Output Disable */ -#define ACCR_SPDIS (1 << 30) /* System PLL Output Disable */ -#define ACCR_D0CS (1 << 26) /* D0 Mode Clock Select */ -#define ACCR_PCCE (1 << 11) /* Power Mode Change Clock Enable */ -#define ACCR_DDR_D0CS (1 << 7) /* DDR SDRAM clock frequency in D0CS (PXA31x only) */ - -#define ACCR_SMCFS_MASK (0x7 << 23) /* Static Memory Controller Frequency Select */ -#define ACCR_SFLFS_MASK (0x3 << 18) /* Frequency Select for Internal Memory Controller */ -#define ACCR_XSPCLK_MASK (0x3 << 16) /* Core Frequency during Frequency Change */ -#define ACCR_HSS_MASK (0x3 << 14) /* System Bus-Clock Frequency Select */ -#define ACCR_DMCFS_MASK (0x3 << 12) /* Dynamic Memory Controller Clock Frequency Select */ -#define ACCR_XN_MASK (0x7 << 8) /* Core PLL Turbo-Mode-to-Run-Mode Ratio */ -#define ACCR_XL_MASK (0x1f) /* Core PLL Run-Mode-to-Oscillator Ratio */ - -#define ACCR_SMCFS(x) (((x) & 0x7) << 23) -#define ACCR_SFLFS(x) (((x) & 0x3) << 18) -#define ACCR_XSPCLK(x) (((x) & 0x3) << 16) -#define ACCR_HSS(x) (((x) & 0x3) << 14) -#define ACCR_DMCFS(x) (((x) & 0x3) << 12) -#define ACCR_XN(x) (((x) & 0x7) << 8) -#define ACCR_XL(x) ((x) & 0x1f) - -/* - * Clock Enable Bit - */ -#define CKEN_LCD 1 /* < LCD Clock Enable */ -#define CKEN_USBH 2 /* < USB host clock enable */ -#define CKEN_CAMERA 3 /* < Camera interface clock enable */ -#define CKEN_NAND 4 /* < NAND Flash Controller Clock Enable */ -#define CKEN_USB2 6 /* < USB 2.0 client clock enable. */ -#define CKEN_DMC 8 /* < Dynamic Memory Controller clock enable */ -#define CKEN_SMC 9 /* < Static Memory Controller clock enable */ -#define CKEN_ISC 10 /* < Internal SRAM Controller clock enable */ -#define CKEN_BOOT 11 /* < Boot rom clock enable */ -#define CKEN_MMC1 12 /* < MMC1 Clock enable */ -#define CKEN_MMC2 13 /* < MMC2 clock enable */ -#define CKEN_KEYPAD 14 /* < Keypand Controller Clock Enable */ -#define CKEN_CIR 15 /* < Consumer IR Clock Enable */ -#define CKEN_USIM0 17 /* < USIM[0] Clock Enable */ -#define CKEN_USIM1 18 /* < USIM[1] Clock Enable */ -#define CKEN_TPM 19 /* < TPM clock enable */ -#define CKEN_UDC 20 /* < UDC clock enable */ -#define CKEN_BTUART 21 /* < BTUART clock enable */ -#define CKEN_FFUART 22 /* < FFUART clock enable */ -#define CKEN_STUART 23 /* < STUART clock enable */ -#define CKEN_AC97 24 /* < AC97 clock enable */ -#define CKEN_TOUCH 25 /* < Touch screen Interface Clock Enable */ -#define CKEN_SSP1 26 /* < SSP1 clock enable */ -#define CKEN_SSP2 27 /* < SSP2 clock enable */ -#define CKEN_SSP3 28 /* < SSP3 clock enable */ -#define CKEN_SSP4 29 /* < SSP4 clock enable */ -#define CKEN_MSL0 30 /* < MSL0 clock enable */ -#define CKEN_PWM0 32 /* < PWM[0] clock enable */ -#define CKEN_PWM1 33 /* < PWM[1] clock enable */ -#define CKEN_I2C 36 /* < I2C clock enable */ -#define CKEN_INTC 38 /* < Interrupt controller clock enable */ -#define CKEN_GPIO 39 /* < GPIO clock enable */ -#define CKEN_1WIRE 40 /* < 1-wire clock enable */ -#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ -#define CKEN_MINI_IM 48 /* < Mini-IM */ -#define CKEN_MINI_LCD 49 /* < Mini LCD */ - -#define CKEN_MMC3 5 /* < MMC3 Clock Enable */ -#define CKEN_MVED 43 /* < MVED clock enable */ - -/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */ -#define CKEN_PXA300_GCU 42 /* Graphics controller clock enable */ -#define CKEN_PXA320_GCU 7 /* Graphics controller clock enable */ - #endif /* __ASM_ARCH_PXA3XX_REGS_H */ diff --git a/arch/arm/mach-pxa/pxa3xx-ulpi.c b/arch/arm/mach-pxa/pxa3xx-ulpi.c index 4bd7da1f8657..c29a7f0fa1b0 100644 --- a/arch/arm/mach-pxa/pxa3xx-ulpi.c +++ b/arch/arm/mach-pxa/pxa3xx-ulpi.c @@ -21,8 +21,8 @@ #include <linux/clk.h> #include <linux/usb.h> #include <linux/usb/otg.h> +#include <linux/soc/pxa/cpu.h> -#include <mach/hardware.h> #include "regs-u2d.h" #include <linux/platform_data/usb-pxa3xx-ulpi.h> diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 560160682df6..979642aa7ffe 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -24,17 +24,18 @@ #include <linux/syscore_ops.h> #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/mmp_dma.h> +#include <linux/soc/pxa/cpu.h> +#include <linux/clk/pxa.h> #include <asm/mach/map.h> #include <asm/suspend.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/reset.h> +#include "pxa3xx-regs.h" +#include "reset.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include "pm.h" -#include <mach/dma.h> -#include <mach/smemc.h> -#include <mach/irqs.h> +#include "addr-map.h" +#include "smemc.h" +#include "irqs.h" #include "generic.h" #include "devices.h" @@ -51,6 +52,10 @@ extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *, unsigned int)); #define NDCR_ND_ARB_EN (1 << 12) #define NDCR_ND_ARB_CNTL (1 << 19) +#define CKEN_BOOT 11 /* < Boot rom clock enable */ +#define CKEN_TPM 19 /* < TPM clock enable */ +#define CKEN_HSIO2 41 /* < HSIO2 clock enable */ + #ifdef CONFIG_PM #define ISRAM_START 0x5c000000 @@ -463,7 +468,7 @@ static int __init pxa3xx_init(void) if (cpu_is_pxa3xx()) { - reset_status = ARSR; + pxa_register_wdt(ARSR); /* * clear RDH bit every time after reset diff --git a/arch/arm/mach-pxa/pxa3xx.h b/arch/arm/mach-pxa/pxa3xx.h index 6d4502aa9d06..81825f7ad258 100644 --- a/arch/arm/mach-pxa/pxa3xx.h +++ b/arch/arm/mach-pxa/pxa3xx.h @@ -2,8 +2,8 @@ #ifndef __MACH_PXA3XX_H #define __MACH_PXA3XX_H -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/irqs.h> +#include "addr-map.h" +#include "pxa3xx-regs.h" +#include "irqs.h" #endif /* __MACH_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c index bf91de4267e5..b9021a40cbd1 100644 --- a/arch/arm/mach-pxa/pxa930.c +++ b/arch/arm/mach-pxa/pxa930.c @@ -13,6 +13,7 @@ #include <linux/irq.h> #include <linux/gpio-pxa.h> #include <linux/platform_device.h> +#include <linux/soc/pxa/cpu.h> #include "pxa930.h" diff --git a/arch/arm/mach-pxa/include/mach/regs-ost.h b/arch/arm/mach-pxa/regs-ost.h index deb564ed8ee7..c8001cfc8d6b 100644 --- a/arch/arm/mach-pxa/include/mach/regs-ost.h +++ b/arch/arm/mach-pxa/regs-ost.h @@ -2,11 +2,13 @@ #ifndef __ASM_MACH_REGS_OST_H #define __ASM_MACH_REGS_OST_H -#include <mach/hardware.h> +#include "pxa-regs.h" /* * OS Timer & Match Registers */ +#define OST_PHYS 0x40A00000 +#define OST_LEN 0x00000020 #define OSMR0 io_p2v(0x40A00000) /* */ #define OSMR1 io_p2v(0x40A00004) /* */ diff --git a/arch/arm/mach-pxa/regs-rtc.h b/arch/arm/mach-pxa/regs-rtc.h index b1f9ff14e335..96255a0f595e 100644 --- a/arch/arm/mach-pxa/regs-rtc.h +++ b/arch/arm/mach-pxa/regs-rtc.h @@ -2,7 +2,7 @@ #ifndef __ASM_MACH_REGS_RTC_H #define __ASM_MACH_REGS_RTC_H -#include <mach/hardware.h> +#include "pxa-regs.h" /* * Real Time Clock diff --git a/arch/arm/mach-pxa/regs-u2d.h b/arch/arm/mach-pxa/regs-u2d.h index fe4c80ad87ec..ab517ba62c9a 100644 --- a/arch/arm/mach-pxa/regs-u2d.h +++ b/arch/arm/mach-pxa/regs-u2d.h @@ -2,8 +2,6 @@ #ifndef __ASM_ARCH_PXA3xx_U2D_H #define __ASM_ARCH_PXA3xx_U2D_H -#include <mach/bitfield.h> - /* * USB2 device controller registers and bits definitions */ diff --git a/arch/arm/mach-pxa/include/mach/regs-uart.h b/arch/arm/mach-pxa/regs-uart.h index 9a168f83afeb..490e9ca16297 100644 --- a/arch/arm/mach-pxa/include/mach/regs-uart.h +++ b/arch/arm/mach-pxa/regs-uart.h @@ -2,6 +2,8 @@ #ifndef __ASM_ARCH_REGS_UART_H #define __ASM_ARCH_REGS_UART_H +#include "pxa-regs.h" + /* * UARTs */ diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c index af78405aa4e9..f0be90573ad3 100644 --- a/arch/arm/mach-pxa/reset.c +++ b/arch/arm/mach-pxa/reset.c @@ -7,12 +7,9 @@ #include <asm/proc-fns.h> #include <asm/system_misc.h> -#include <mach/regs-ost.h> -#include <mach/reset.h> -#include <mach/smemc.h> - -unsigned int reset_status; -EXPORT_SYMBOL(reset_status); +#include "regs-ost.h" +#include "reset.h" +#include "smemc.h" static void do_hw_reset(void); diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/reset.h index e1c4d100fd45..963dd190bc13 100644 --- a/arch/arm/mach-pxa/include/mach/reset.h +++ b/arch/arm/mach-pxa/reset.h @@ -8,8 +8,8 @@ #define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ #define RESET_STATUS_ALL (0xf) -extern unsigned int reset_status; extern void clear_reset_status(unsigned int mask); +extern void pxa_register_wdt(unsigned int reset_status); /** * init_gpio_reset() - register GPIO as reset generator diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 83cfbb882a2d..a829baf8d922 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -24,7 +24,7 @@ #include <asm/mach-types.h> #include "pm.h" -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" #include "regs-rtc.h" #include "sharpsl_pm.h" diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 6c5b3ffd2cd3..d58cf52e3848 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -13,13 +13,14 @@ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/hardware.h> -#include <mach/smemc.h> -#include <mach/pxa2xx-regs.h> +#include "smemc.h" +#include "pxa2xx-regs.h" #define MDREFR_KDIV 0x200a4000 // all banks #define CCCR_SLEEP 0x00000107 // L=7 2N=2 A=0 PPDIS=0 CPDIS=0 - +#define CCCR_N_MASK 0x00000380 +#define CCCR_M_MASK 0x00000060 +#define CCCR_L_MASK 0x0000001f .text #ifdef CONFIG_PXA3xx diff --git a/arch/arm/mach-pxa/smemc.c b/arch/arm/mach-pxa/smemc.c index 32e82cc92ea5..2d2a321d82f8 100644 --- a/arch/arm/mach-pxa/smemc.c +++ b/arch/arm/mach-pxa/smemc.c @@ -8,9 +8,10 @@ #include <linux/init.h> #include <linux/io.h> #include <linux/syscore_ops.h> +#include <linux/soc/pxa/cpu.h> -#include <mach/hardware.h> -#include <mach/smemc.h> +#include "smemc.h" +#include <linux/soc/pxa/smemc.h> #ifdef CONFIG_PM static unsigned long msc[2]; @@ -70,3 +71,11 @@ static int __init smemc_init(void) } subsys_initcall(smemc_init); #endif + +static const unsigned int df_clkdiv[4] = { 1, 2, 4, 1 }; +unsigned int pxa3xx_smemc_get_memclkdiv(void) +{ + unsigned long memclkcfg = __raw_readl(MEMCLKCFG); + + return df_clkdiv[(memclkcfg >> 16) & 0x3]; +} diff --git a/arch/arm/mach-pxa/include/mach/smemc.h b/arch/arm/mach-pxa/smemc.h index 9b2453a7ab23..9b2453a7ab23 100644 --- a/arch/arm/mach-pxa/include/mach/smemc.h +++ b/arch/arm/mach-pxa/smemc.h diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 371008e9bb02..9964729cd428 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -39,14 +39,14 @@ #include "pxa27x.h" #include "pxa27x-udc.h" -#include <mach/reset.h> +#include "reset.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/spitz.h> +#include "spitz.h" #include "sharpsl_pm.h" -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" #include "devices.h" @@ -510,10 +510,6 @@ static struct ads7846_platform_data spitz_ads7846_info = { .wait_for_sync = spitz_ads7846_wait_for_hsync, }; -static struct pxa2xx_spi_chip spitz_ads7846_chip = { - .gpio_cs = SPITZ_GPIO_ADS7846_CS, -}; - static void spitz_bl_kick_battery(void) { void (*kick_batt)(void); @@ -555,14 +551,6 @@ static struct corgi_lcd_platform_data spitz_lcdcon_info = { .kick_battery = spitz_bl_kick_battery, }; -static struct pxa2xx_spi_chip spitz_lcdcon_chip = { - .gpio_cs = SPITZ_GPIO_LCDCON_CS, -}; - -static struct pxa2xx_spi_chip spitz_max1111_chip = { - .gpio_cs = SPITZ_GPIO_MAX1111_CS, -}; - static struct spi_board_info spitz_spi_devices[] = { { .modalias = "ads7846", @@ -570,7 +558,6 @@ static struct spi_board_info spitz_spi_devices[] = { .bus_num = 2, .chip_select = 0, .platform_data = &spitz_ads7846_info, - .controller_data = &spitz_ads7846_chip, .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT), }, { .modalias = "corgi-lcd", @@ -578,13 +565,11 @@ static struct spi_board_info spitz_spi_devices[] = { .bus_num = 2, .chip_select = 1, .platform_data = &spitz_lcdcon_info, - .controller_data = &spitz_lcdcon_chip, }, { .modalias = "max1111", .max_speed_hz = 450000, .bus_num = 2, .chip_select = 2, - .controller_data = &spitz_max1111_chip, }, }; @@ -592,6 +577,16 @@ static struct pxa2xx_spi_controller spitz_spi_info = { .num_chipselect = 3, }; +static struct gpiod_lookup_table spitz_spi_gpio_table = { + .dev_id = "spi2", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW), + { }, + }, +}; + static void __init spitz_spi_init(void) { if (machine_is_akita()) @@ -599,6 +594,7 @@ static void __init spitz_spi_init(void) else gpiod_add_lookup_table(&spitz_lcdcon_gpio_table); + gpiod_add_lookup_table(&spitz_spi_gpio_table); pxa2xx_set_spi_info(2, &spitz_spi_info); spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); } @@ -966,11 +962,42 @@ static void __init spitz_i2c_init(void) static inline void spitz_i2c_init(void) {} #endif +static struct gpiod_lookup_table spitz_audio_gpio_table = { + .dev_id = "spitz-audio", + .table = { + GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE, + "mute-l", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE, + "mute-r", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop.1", SPITZ_GPIO_MIC_BIAS - SPITZ_SCP2_GPIO_BASE, + "mic", GPIO_ACTIVE_HIGH), + { }, + }, +}; + +static struct gpiod_lookup_table akita_audio_gpio_table = { + .dev_id = "spitz-audio", + .table = { + GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_L - SPITZ_SCP_GPIO_BASE, + "mute-l", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("sharp-scoop.0", SPITZ_GPIO_MUTE_R - SPITZ_SCP_GPIO_BASE, + "mute-r", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("i2c-max7310", AKITA_GPIO_MIC_BIAS - AKITA_IOEXP_GPIO_BASE, + "mic", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /****************************************************************************** * Audio devices ******************************************************************************/ static inline void spitz_audio_init(void) { + if (machine_is_akita()) + gpiod_add_lookup_table(&akita_audio_gpio_table); + else + gpiod_add_lookup_table(&spitz_audio_gpio_table); + platform_device_register_simple("spitz-audio", -1, NULL, 0); } diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/spitz.h index 04828d8918aa..04828d8918aa 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/spitz.h diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c index 25a1f8c5a738..6689b67f9ce5 100644 --- a/arch/arm/mach-pxa/spitz_pm.c +++ b/arch/arm/mach-pxa/spitz_pm.c @@ -18,9 +18,8 @@ #include <asm/irq.h> #include <asm/mach-types.h> -#include <mach/hardware.h> -#include <mach/spitz.h> +#include "spitz.h" #include "pxa27x.h" #include "sharpsl_pm.h" diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S index eab1645bb4ad..ad32b9c0ebce 100644 --- a/arch/arm/mach-pxa/standby.S +++ b/arch/arm/mach-pxa/standby.S @@ -1,19 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * PXA27x standby mode * * Author: David Burrage * - * 2005 (c) MontaVista Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. + * 2005 (c) MontaVista Software, Inc. */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> +#include "pxa2xx-regs.h" .text diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c deleted file mode 100644 index 8ca02ec1d44c..000000000000 --- a/arch/arm/mach-pxa/stargate2.c +++ /dev/null @@ -1,1030 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/mach-pxa/stargate2.c - * - * Author: Ed C. Epp - * Created: Nov 05, 2002 - * Copyright: Intel Corp. - * - * Modified 2009: Jonathan Cameron <jic23@cam.ac.uk> - */ - -#include <linux/init.h> -#include <linux/device.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <linux/bitops.h> -#include <linux/fb.h> -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/regulator/machine.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/plat-ram.h> -#include <linux/mtd/partitions.h> - -#include <linux/platform_data/i2c-pxa.h> -#include <linux/platform_data/pcf857x.h> -#include <linux/smc91x.h> -#include <linux/gpio/machine.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <linux/property.h> - -#include <asm/types.h> -#include <asm/setup.h> -#include <asm/memory.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> -#include <asm/mach/flash.h> - -#include "pxa27x.h" -#include <linux/platform_data/mmc-pxamci.h> -#include "udc.h" -#include "pxa27x-udc.h" -#include <mach/smemc.h> - -#include <linux/spi/spi.h> -#include <linux/spi/pxa2xx_spi.h> -#include <linux/mfd/da903x.h> - -#include "devices.h" -#include "generic.h" - -#define STARGATE_NR_IRQS (IRQ_BOARD_START + 8) - -/* Bluetooth */ -#define SG2_BT_RESET 81 - -/* SD */ -#define SG2_GPIO_nSD_DETECT 90 -#define SG2_SD_POWER_ENABLE 89 - -static unsigned long sg2_im2_unified_pin_config[] __initdata = { - /* Device Identification for wakeup*/ - GPIO102_GPIO, - /* DA9030 */ - GPIO1_GPIO, - - /* MMC */ - GPIO32_MMC_CLK, - GPIO112_MMC_CMD, - GPIO92_MMC_DAT_0, - GPIO109_MMC_DAT_1, - GPIO110_MMC_DAT_2, - GPIO111_MMC_DAT_3, - - /* 802.15.4 radio - driver out of mainline */ - GPIO22_GPIO, /* CC_RSTN */ - GPIO114_GPIO, /* CC_FIFO */ - GPIO116_GPIO, /* CC_CCA */ - GPIO0_GPIO, /* CC_FIFOP */ - GPIO16_GPIO, /* CCSFD */ - GPIO115_GPIO, /* Power enable */ - - /* I2C */ - GPIO117_I2C_SCL, - GPIO118_I2C_SDA, - - /* SSP 3 - 802.15.4 radio */ - GPIO39_GPIO, /* Chip Select */ - GPIO34_SSP3_SCLK, - GPIO35_SSP3_TXD, - GPIO41_SSP3_RXD, - - /* SSP 2 to daughter boards */ - GPIO11_SSP2_RXD, - GPIO38_SSP2_TXD, - GPIO36_SSP2_SCLK, - GPIO37_GPIO, /* chip select */ - - /* SSP 1 - to daughter boards */ - GPIO24_GPIO, /* Chip Select */ - GPIO23_SSP1_SCLK, - GPIO25_SSP1_TXD, - GPIO26_SSP1_RXD, - - /* BTUART Basic Connector*/ - GPIO42_BTUART_RXD, - GPIO43_BTUART_TXD, - GPIO44_BTUART_CTS, - GPIO45_BTUART_RTS, - - /* STUART - IM2 via debug board not sure on SG2*/ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - - /* Basic sensor board */ - GPIO96_GPIO, /* accelerometer interrupt */ - GPIO99_GPIO, /* ADC interrupt */ - - /* SHT15 */ - GPIO100_GPIO, - GPIO98_GPIO, - - /* Basic sensor board */ - GPIO96_GPIO, /* accelerometer interrupt */ - GPIO99_GPIO, /* ADC interrupt */ - - /* Connector pins specified as gpios */ - GPIO94_GPIO, /* large basic connector pin 14 */ - GPIO10_GPIO, /* large basic connector pin 23 */ -}; - -static struct gpiod_lookup_table sht15_gpiod_table = { - .dev_id = "sht15", - .table = { - /* FIXME: should this have |GPIO_OPEN_DRAIN set? */ - GPIO_LOOKUP("gpio-pxa", 100, "data", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("gpio-pxa", 98, "clk", GPIO_ACTIVE_HIGH), - }, -}; - -static struct platform_device sht15 = { - .name = "sht15", - .id = -1, -}; - -static struct regulator_consumer_supply stargate2_sensor_3_con[] = { - REGULATOR_SUPPLY("vcc", "sht15"), -}; - -enum stargate2_ldos{ - vcc_vref, - vcc_cc2420, - /* a mote connector? */ - vcc_mica, - /* the CSR bluecore chip */ - vcc_bt, - /* The two voltages available to sensor boards */ - vcc_sensor_1_8, - vcc_sensor_3, - /* directly connected to the pxa27x */ - vcc_sram_ext, - vcc_pxa_pll, - vcc_pxa_usim, /* Reference voltage for certain gpios */ - vcc_pxa_mem, - vcc_pxa_flash, - vcc_pxa_core, /*Dc-Dc buck not yet supported */ - vcc_lcd, - vcc_bb, - vcc_bbio, /*not sure!*/ - vcc_io, /* cc2420 802.15.4 radio and pxa vcc_io ?*/ -}; - -/* The values of the various regulator constraints are obviously dependent - * on exactly what is wired to each ldo. Unfortunately this information is - * not generally available. More information has been requested from Xbow. - */ -static struct regulator_init_data stargate2_ldo_init_data[] = { - [vcc_bbio] = { - .constraints = { /* board default 1.8V */ - .name = "vcc_bbio", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_bb] = { - .constraints = { /* board default 2.8V */ - .name = "vcc_bb", - .min_uV = 2700000, - .max_uV = 3000000, - }, - }, - [vcc_pxa_flash] = { - .constraints = {/* default is 1.8V */ - .name = "vcc_pxa_flash", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_cc2420] = { /* also vcc_io */ - .constraints = { - /* board default is 2.8V */ - .name = "vcc_cc2420", - .min_uV = 2700000, - .max_uV = 3300000, - }, - }, - [vcc_vref] = { /* Reference for what? */ - .constraints = { /* default 1.8V */ - .name = "vcc_vref", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_sram_ext] = { - .constraints = { /* default 2.8V */ - .name = "vcc_sram_ext", - .min_uV = 2800000, - .max_uV = 2800000, - }, - }, - [vcc_mica] = { - .constraints = { /* default 2.8V */ - .name = "vcc_mica", - .min_uV = 2800000, - .max_uV = 2800000, - }, - }, - [vcc_bt] = { - .constraints = { /* default 2.8V */ - .name = "vcc_bt", - .min_uV = 2800000, - .max_uV = 2800000, - }, - }, - [vcc_lcd] = { - .constraints = { /* default 2.8V */ - .name = "vcc_lcd", - .min_uV = 2700000, - .max_uV = 3300000, - }, - }, - [vcc_io] = { /* Same or higher than everything - * bar vccbat and vccusb */ - .constraints = { /* default 2.8V */ - .name = "vcc_io", - .min_uV = 2692000, - .max_uV = 3300000, - }, - }, - [vcc_sensor_1_8] = { - .constraints = { /* default 1.8V */ - .name = "vcc_sensor_1_8", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, - [vcc_sensor_3] = { /* curiously default 2.8V */ - .constraints = { - .name = "vcc_sensor_3", - .min_uV = 2800000, - .max_uV = 3000000, - }, - .num_consumer_supplies = ARRAY_SIZE(stargate2_sensor_3_con), - .consumer_supplies = stargate2_sensor_3_con, - }, - [vcc_pxa_pll] = { /* 1.17V - 1.43V, default 1.3V*/ - .constraints = { - .name = "vcc_pxa_pll", - .min_uV = 1170000, - .max_uV = 1430000, - }, - }, - [vcc_pxa_usim] = { - .constraints = { /* default 1.8V */ - .name = "vcc_pxa_usim", - .min_uV = 1710000, - .max_uV = 2160000, - }, - }, - [vcc_pxa_mem] = { - .constraints = { /* default 1.8V */ - .name = "vcc_pxa_mem", - .min_uV = 1800000, - .max_uV = 1800000, - }, - }, -}; - -static struct mtd_partition stargate2flash_partitions[] = { - { - .name = "Bootloader", - .size = 0x00040000, - .offset = 0, - .mask_flags = 0, - }, { - .name = "Kernel", - .size = 0x00200000, - .offset = 0x00040000, - .mask_flags = 0 - }, { - .name = "Filesystem", - .size = 0x01DC0000, - .offset = 0x00240000, - .mask_flags = 0 - }, -}; - -static struct resource flash_resources = { - .start = PXA_CS0_PHYS, - .end = PXA_CS0_PHYS + SZ_32M - 1, - .flags = IORESOURCE_MEM, -}; - -static struct flash_platform_data stargate2_flash_data = { - .map_name = "cfi_probe", - .parts = stargate2flash_partitions, - .nr_parts = ARRAY_SIZE(stargate2flash_partitions), - .name = "PXA27xOnChipROM", - .width = 2, -}; - -static struct platform_device stargate2_flash_device = { - .name = "pxa2xx-flash", - .id = 0, - .dev = { - .platform_data = &stargate2_flash_data, - }, - .resource = &flash_resources, - .num_resources = 1, -}; - -static struct pxa2xx_spi_controller pxa_ssp_master_0_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_controller pxa_ssp_master_1_info = { - .num_chipselect = 1, -}; - -static struct pxa2xx_spi_controller pxa_ssp_master_2_info = { - .num_chipselect = 1, -}; - -/* An upcoming kernel change will scrap SFRM usage so these - * drivers have been moved to use GPIOs */ -static struct pxa2xx_spi_chip staccel_chip_info = { - .tx_threshold = 8, - .rx_threshold = 8, - .dma_burst_size = 8, - .timeout = 235, - .gpio_cs = 24, -}; - -static struct pxa2xx_spi_chip cc2420_info = { - .tx_threshold = 8, - .rx_threshold = 8, - .dma_burst_size = 8, - .timeout = 235, - .gpio_cs = 39, -}; - -static struct spi_board_info spi_board_info[] __initdata = { - { - .modalias = "lis3l02dq", - .max_speed_hz = 8000000,/* 8MHz max spi frequency at 3V */ - .bus_num = 1, - .chip_select = 0, - .controller_data = &staccel_chip_info, - .irq = PXA_GPIO_TO_IRQ(96), - }, { - .modalias = "cc2420", - .max_speed_hz = 6500000, - .bus_num = 3, - .chip_select = 0, - .controller_data = &cc2420_info, - }, -}; - -static void sg2_udc_command(int cmd) -{ - switch (cmd) { - case PXA2XX_UDC_CMD_CONNECT: - UP2OCR |= UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE; - break; - case PXA2XX_UDC_CMD_DISCONNECT: - UP2OCR &= ~(UP2OCR_HXOE | UP2OCR_DPPUE | UP2OCR_DPPUBE); - break; - } -} - -static struct i2c_pxa_platform_data i2c_pwr_pdata = { - .fast_mode = 1, -}; - -static struct i2c_pxa_platform_data i2c_pdata = { - .fast_mode = 1, -}; - -static void __init imote2_stargate2_init(void) -{ - - pxa2xx_mfp_config(ARRAY_AND_SIZE(sg2_im2_unified_pin_config)); - - pxa_set_ffuart_info(NULL); - pxa_set_btuart_info(NULL); - pxa_set_stuart_info(NULL); - - pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); - pxa2xx_set_spi_info(2, &pxa_ssp_master_1_info); - pxa2xx_set_spi_info(3, &pxa_ssp_master_2_info); - spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); - - - pxa27x_set_i2c_power_info(&i2c_pwr_pdata); - pxa_set_i2c_info(&i2c_pdata); -} - -#ifdef CONFIG_MACH_INTELMOTE2 -/* As the the imote2 doesn't currently have a conventional SD slot - * there is no option to hotplug cards, making all this rather simple - */ -static int imote2_mci_get_ro(struct device *dev) -{ - return 0; -} - -/* Rather simple case as hotplugging not possible */ -static struct pxamci_platform_data imote2_mci_platform_data = { - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */ - .get_ro = imote2_mci_get_ro, -}; - -static struct gpio_led imote2_led_pins[] = { - { - .name = "imote2:red", - .gpio = 103, - .active_low = 1, - }, { - .name = "imote2:green", - .gpio = 104, - .active_low = 1, - }, { - .name = "imote2:blue", - .gpio = 105, - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data imote2_led_data = { - .num_leds = ARRAY_SIZE(imote2_led_pins), - .leds = imote2_led_pins, -}; - -static struct platform_device imote2_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &imote2_led_data, - }, -}; - -static struct da903x_subdev_info imote2_da9030_subdevs[] = { - { - .name = "da903x-regulator", - .id = DA9030_ID_LDO2, - .platform_data = &stargate2_ldo_init_data[vcc_bbio], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO3, - .platform_data = &stargate2_ldo_init_data[vcc_bb], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO4, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO5, - .platform_data = &stargate2_ldo_init_data[vcc_cc2420], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO6, - .platform_data = &stargate2_ldo_init_data[vcc_vref], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO7, - .platform_data = &stargate2_ldo_init_data[vcc_sram_ext], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO8, - .platform_data = &stargate2_ldo_init_data[vcc_mica], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO9, - .platform_data = &stargate2_ldo_init_data[vcc_bt], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO10, - .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO11, - .platform_data = &stargate2_ldo_init_data[vcc_sensor_3], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO12, - .platform_data = &stargate2_ldo_init_data[vcc_lcd], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO15, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO17, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim], - }, { - .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */ - .id = DA9030_ID_LDO18, - .platform_data = &stargate2_ldo_init_data[vcc_io], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO19, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem], - }, -}; - -static struct da903x_platform_data imote2_da9030_pdata = { - .num_subdevs = ARRAY_SIZE(imote2_da9030_subdevs), - .subdevs = imote2_da9030_subdevs, -}; - -static struct i2c_board_info __initdata imote2_pwr_i2c_board_info[] = { - { - .type = "da9030", - .addr = 0x49, - .platform_data = &imote2_da9030_pdata, - .irq = PXA_GPIO_TO_IRQ(1), - }, -}; - -static struct i2c_board_info __initdata imote2_i2c_board_info[] = { - { /* UCAM sensor board */ - .type = "max1239", - .addr = 0x35, - }, { /* ITS400 Sensor board only */ - .type = "max1363", - .addr = 0x34, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = PXA_GPIO_TO_IRQ(99), - }, { /* ITS400 Sensor board only */ - .type = "tsl2561", - .addr = 0x49, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = PXA_GPIO_TO_IRQ(99), - }, { /* ITS400 Sensor board only */ - .type = "tmp175", - .addr = 0x4A, - .irq = PXA_GPIO_TO_IRQ(96), - }, { /* IMB400 Multimedia board */ - .type = "wm8940", - .addr = 0x1A, - }, -}; - -static unsigned long imote2_pin_config[] __initdata = { - - /* Button */ - GPIO91_GPIO, - - /* LEDS */ - GPIO103_GPIO, /* red led */ - GPIO104_GPIO, /* green led */ - GPIO105_GPIO, /* blue led */ -}; - -static struct pxa2xx_udc_mach_info imote2_udc_info __initdata = { - .udc_command = sg2_udc_command, -}; - -static struct platform_device imote2_audio_device = { - .name = "imote2-audio", - .id = -1, -}; - -static struct platform_device *imote2_devices[] = { - &stargate2_flash_device, - &imote2_leds, - &sht15, - &imote2_audio_device, -}; - -static void __init imote2_init(void) -{ - pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config)); - - imote2_stargate2_init(); - - gpiod_add_lookup_table(&sht15_gpiod_table); - platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices)); - - i2c_register_board_info(0, imote2_i2c_board_info, - ARRAY_SIZE(imote2_i2c_board_info)); - i2c_register_board_info(1, imote2_pwr_i2c_board_info, - ARRAY_SIZE(imote2_pwr_i2c_board_info)); - - pxa_set_mci_info(&imote2_mci_platform_data); - pxa_set_udc_info(&imote2_udc_info); -} -#endif - -#ifdef CONFIG_MACH_STARGATE2 - -static unsigned long stargate2_pin_config[] __initdata = { - - GPIO15_nCS_1, /* SRAM */ - /* SMC91x */ - GPIO80_nCS_4, - GPIO40_GPIO, /*cable detect?*/ - - /* Button */ - GPIO91_GPIO | WAKEUP_ON_LEVEL_HIGH, - - /* Compact Flash */ - GPIO79_PSKTSEL, - GPIO48_nPOE, - GPIO49_nPWE, - GPIO50_nPIOR, - GPIO51_nPIOW, - GPIO85_nPCE_1, - GPIO54_nPCE_2, - GPIO55_nPREG, - GPIO56_nPWAIT, - GPIO57_nIOIS16, - GPIO120_GPIO, /* Buff ctrl */ - GPIO108_GPIO, /* Power ctrl */ - GPIO82_GPIO, /* Reset */ - GPIO53_GPIO, /* SG2_S0_GPIO_DETECT */ - - /* MMC not shared with imote2 */ - GPIO90_GPIO, /* nSD detect */ - GPIO89_GPIO, /* SD_POWER_ENABLE */ - - /* Bluetooth */ - GPIO81_GPIO, /* reset */ -}; - -static struct resource smc91x_resources[] = { - [0] = { - .name = "smc91x-regs", - .start = (PXA_CS4_PHYS + 0x300), - .end = (PXA_CS4_PHYS + 0xfffff), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = PXA_GPIO_TO_IRQ(40), - .end = PXA_GPIO_TO_IRQ(40), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, - } -}; - -static struct smc91x_platdata stargate2_smc91x_info = { - .flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT - | SMC91X_NOWAIT | SMC91X_USE_DMA, - .pxa_u16_align4 = true, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, - .dev = { - .platform_data = &stargate2_smc91x_info, - }, -}; - - -/* - * The card detect interrupt isn't debounced so we delay it by 250ms - * to give the card a chance to fully insert / eject. - */ -static int stargate2_mci_init(struct device *dev, - irq_handler_t stargate2_detect_int, - void *data) -{ - int err; - - err = gpio_request(SG2_SD_POWER_ENABLE, "SG2_sd_power_enable"); - if (err) { - printk(KERN_ERR "Can't get the gpio for SD power control"); - goto return_err; - } - gpio_direction_output(SG2_SD_POWER_ENABLE, 0); - - err = gpio_request(SG2_GPIO_nSD_DETECT, "SG2_sd_detect"); - if (err) { - printk(KERN_ERR "Can't get the sd detect gpio"); - goto free_power_en; - } - gpio_direction_input(SG2_GPIO_nSD_DETECT); - - err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), - stargate2_detect_int, - IRQ_TYPE_EDGE_BOTH, - "MMC card detect", - data); - if (err) { - printk(KERN_ERR "can't request MMC card detect IRQ\n"); - goto free_nsd_detect; - } - return 0; - - free_nsd_detect: - gpio_free(SG2_GPIO_nSD_DETECT); - free_power_en: - gpio_free(SG2_SD_POWER_ENABLE); - return_err: - return err; -} - -/** - * stargate2_mci_setpower() - set state of mmc power supply - * - * Very simple control. Either it is on or off and is controlled by - * a gpio pin */ -static int stargate2_mci_setpower(struct device *dev, unsigned int vdd) -{ - gpio_set_value(SG2_SD_POWER_ENABLE, !!vdd); - return 0; -} - -static void stargate2_mci_exit(struct device *dev, void *data) -{ - free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data); - gpio_free(SG2_SD_POWER_ENABLE); - gpio_free(SG2_GPIO_nSD_DETECT); -} - -static struct pxamci_platform_data stargate2_mci_platform_data = { - .detect_delay_ms = 250, - .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, - .init = stargate2_mci_init, - .setpower = stargate2_mci_setpower, - .exit = stargate2_mci_exit, -}; - - -/* - * SRAM - The Stargate 2 has 32MB of SRAM. - * - * Here it is made available as an MTD. This will then - * typically have a cifs filesystem created on it to provide - * fast temporary storage. - */ -static struct resource sram_resources = { - .start = PXA_CS1_PHYS, - .end = PXA_CS1_PHYS + SZ_32M-1, - .flags = IORESOURCE_MEM, -}; - -static struct platdata_mtd_ram stargate2_sram_pdata = { - .mapname = "Stargate2 SRAM", - .bankwidth = 2, -}; - -static struct platform_device stargate2_sram = { - .name = "mtd-ram", - .id = 0, - .resource = &sram_resources, - .num_resources = 1, - .dev = { - .platform_data = &stargate2_sram_pdata, - }, -}; - -static struct pcf857x_platform_data platform_data_pcf857x = { - .gpio_base = 128, - .n_latch = 0, - .setup = NULL, - .teardown = NULL, - .context = NULL, -}; - -static const struct property_entry pca9500_eeprom_properties[] = { - PROPERTY_ENTRY_U32("pagesize", 4), - { } -}; - -static const struct software_node pca9500_eeprom_node = { - .properties = pca9500_eeprom_properties, -}; - -/** - * stargate2_reset_bluetooth() reset the bluecore to ensure consistent state - **/ -static int stargate2_reset_bluetooth(void) -{ - int err; - err = gpio_request(SG2_BT_RESET, "SG2_BT_RESET"); - if (err) { - printk(KERN_ERR "Could not get gpio for bluetooth reset\n"); - return err; - } - gpio_direction_output(SG2_BT_RESET, 1); - mdelay(5); - /* now reset it - 5 msec minimum */ - gpio_set_value(SG2_BT_RESET, 0); - mdelay(10); - gpio_set_value(SG2_BT_RESET, 1); - gpio_free(SG2_BT_RESET); - return 0; -} - -static struct led_info stargate2_leds[] = { - { - .name = "sg2:red", - .flags = DA9030_LED_RATE_ON, - }, { - .name = "sg2:blue", - .flags = DA9030_LED_RATE_ON, - }, { - .name = "sg2:green", - .flags = DA9030_LED_RATE_ON, - }, -}; - -static struct da903x_subdev_info stargate2_da9030_subdevs[] = { - { - .name = "da903x-led", - .id = DA9030_ID_LED_2, - .platform_data = &stargate2_leds[0], - }, { - .name = "da903x-led", - .id = DA9030_ID_LED_3, - .platform_data = &stargate2_leds[2], - }, { - .name = "da903x-led", - .id = DA9030_ID_LED_4, - .platform_data = &stargate2_leds[1], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO2, - .platform_data = &stargate2_ldo_init_data[vcc_bbio], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO3, - .platform_data = &stargate2_ldo_init_data[vcc_bb], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO4, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_flash], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO5, - .platform_data = &stargate2_ldo_init_data[vcc_cc2420], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO6, - .platform_data = &stargate2_ldo_init_data[vcc_vref], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO7, - .platform_data = &stargate2_ldo_init_data[vcc_sram_ext], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO8, - .platform_data = &stargate2_ldo_init_data[vcc_mica], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO9, - .platform_data = &stargate2_ldo_init_data[vcc_bt], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO10, - .platform_data = &stargate2_ldo_init_data[vcc_sensor_1_8], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO11, - .platform_data = &stargate2_ldo_init_data[vcc_sensor_3], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO12, - .platform_data = &stargate2_ldo_init_data[vcc_lcd], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO15, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_pll], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO17, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_usim], - }, { - .name = "da903x-regulator", /*pxa vcc i/o and cc2420 vcc i/o */ - .id = DA9030_ID_LDO18, - .platform_data = &stargate2_ldo_init_data[vcc_io], - }, { - .name = "da903x-regulator", - .id = DA9030_ID_LDO19, - .platform_data = &stargate2_ldo_init_data[vcc_pxa_mem], - }, -}; - -static struct da903x_platform_data stargate2_da9030_pdata = { - .num_subdevs = ARRAY_SIZE(stargate2_da9030_subdevs), - .subdevs = stargate2_da9030_subdevs, -}; - -static struct i2c_board_info __initdata stargate2_pwr_i2c_board_info[] = { - { - .type = "da9030", - .addr = 0x49, - .platform_data = &stargate2_da9030_pdata, - .irq = PXA_GPIO_TO_IRQ(1), - }, -}; - -static struct i2c_board_info __initdata stargate2_i2c_board_info[] = { - /* Techically this a pca9500 - but it's compatible with the 8574 - * for gpio expansion and the 24c02 for eeprom access. - */ - { - .type = "pcf8574", - .addr = 0x27, - .platform_data = &platform_data_pcf857x, - }, { - .type = "24c02", - .addr = 0x57, - .swnode = &pca9500_eeprom_node, - }, { - .type = "max1238", - .addr = 0x35, - }, { /* ITS400 Sensor board only */ - .type = "max1363", - .addr = 0x34, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = PXA_GPIO_TO_IRQ(99), - }, { /* ITS400 Sensor board only */ - .type = "tsl2561", - .addr = 0x49, - /* Through a nand gate - Also beware, on V2 sensor board the - * pull up resistors are missing. - */ - .irq = PXA_GPIO_TO_IRQ(99), - }, { /* ITS400 Sensor board only */ - .type = "tmp175", - .addr = 0x4A, - .irq = PXA_GPIO_TO_IRQ(96), - }, -}; - -/* Board doesn't support cable detection - so always lie and say - * something is there. - */ -static int sg2_udc_detect(void) -{ - return 1; -} - -static struct pxa2xx_udc_mach_info stargate2_udc_info __initdata = { - .udc_is_connected = sg2_udc_detect, - .udc_command = sg2_udc_command, -}; - -static struct platform_device *stargate2_devices[] = { - &stargate2_flash_device, - &stargate2_sram, - &smc91x_device, - &sht15, -}; - -static void __init stargate2_init(void) -{ - /* This is probably a board specific hack as this must be set - prior to connecting the MFP stuff up. */ - __raw_writel(__raw_readl(MECR) & ~MECR_NOS, MECR); - - pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config)); - - imote2_stargate2_init(); - - gpiod_add_lookup_table(&sht15_gpiod_table); - platform_add_devices(ARRAY_AND_SIZE(stargate2_devices)); - - i2c_register_board_info(0, ARRAY_AND_SIZE(stargate2_i2c_board_info)); - i2c_register_board_info(1, stargate2_pwr_i2c_board_info, - ARRAY_SIZE(stargate2_pwr_i2c_board_info)); - - pxa_set_mci_info(&stargate2_mci_platform_data); - - pxa_set_udc_info(&stargate2_udc_info); - - stargate2_reset_bluetooth(); -} -#endif - -#ifdef CONFIG_MACH_INTELMOTE2 -MACHINE_START(INTELMOTE2, "IMOTE 2") - .map_io = pxa27x_map_io, - .nr_irqs = PXA_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = imote2_init, - .atag_offset = 0x100, - .restart = pxa_restart, -MACHINE_END -#endif - -#ifdef CONFIG_MACH_STARGATE2 -MACHINE_START(STARGATE2, "Stargate 2") - .map_io = pxa27x_map_io, - .nr_irqs = STARGATE_NR_IRQS, - .init_irq = pxa27x_init_irq, - .handle_irq = pxa27x_handle_irq, - .init_time = pxa_timer_init, - .init_machine = stargate2_init, - .atag_offset = 0x100, - .restart = pxa_restart, -MACHINE_END -#endif diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 431709725d02..d41641d6cfcd 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -40,16 +40,16 @@ #include <asm/mach-types.h> #include "pxa25x.h" -#include <mach/reset.h> +#include "reset.h" #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/mmc-pxamci.h> #include "udc.h" #include "tosa_bt.h" -#include <mach/audio.h> -#include <mach/smemc.h> +#include <linux/platform_data/asoc-pxa.h> +#include "smemc.h" #include <asm/mach/arch.h> -#include <mach/tosa.h> +#include "tosa.h" #include <asm/hardware/scoop.h> #include <asm/mach/sharpsl_param.h> @@ -296,9 +296,9 @@ static struct gpiod_lookup_table tosa_mci_gpio_table = { .table = { GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_nSD_DETECT, "cd", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_SD_WP, + GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_SD_WP - TOSA_SCOOP_GPIO_BASE, "wp", GPIO_ACTIVE_LOW), - GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_PWR_ON, + GPIO_LOOKUP("sharp-scoop.0", TOSA_GPIO_PWR_ON - TOSA_SCOOP_GPIO_BASE, "power", GPIO_ACTIVE_HIGH), { }, }, @@ -616,6 +616,22 @@ static struct resource tc6393xb_resources[] = { }, }; +static struct gpiod_lookup_table tosa_battery_gpio_table = { + .dev_id = "wm97xx-battery", + .table = { + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_CRG, + "main battery full", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_CRG, + "jacket battery full", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT0_LOW, + "main battery low", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_BAT1_LOW, + "jacket battery low", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_JACKET_DETECT, + "jacket detect", GPIO_ACTIVE_HIGH), + { }, + }, +}; static int tosa_tc6393xb_enable(struct platform_device *dev) { @@ -662,13 +678,11 @@ err_req_pclr: return rc; } -static int tosa_tc6393xb_disable(struct platform_device *dev) +static void tosa_tc6393xb_disable(struct platform_device *dev) { gpio_free(TOSA_GPIO_TC6393XB_L3V_ON); gpio_free(TOSA_GPIO_TC6393XB_SUSPEND); gpio_free(TOSA_GPIO_TC6393XB_REST_IN); - - return 0; } static int tosa_tc6393xb_resume(struct platform_device *dev) @@ -709,31 +723,6 @@ static struct tmio_nand_data tosa_tc6393xb_nand_config = { .part_parsers = probes, }; -static int tosa_tc6393xb_setup(struct platform_device *dev) -{ - int rc; - - rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON"); - if (rc) - goto err_req; - - rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1); - if (rc) - goto err_dir; - - return rc; - -err_dir: - gpio_free(TOSA_GPIO_CARD_VCC_ON); -err_req: - return rc; -} - -static void tosa_tc6393xb_teardown(struct platform_device *dev) -{ - gpio_free(TOSA_GPIO_CARD_VCC_ON); -} - #ifdef CONFIG_MFD_TC6393XB static struct fb_videomode tosa_tc6393xb_lcd_mode[] = { { @@ -778,9 +767,6 @@ static struct tc6393xb_platform_data tosa_tc6393xb_data = { .scr_gper = 0x3300, .irq_base = IRQ_BOARD_START, - .gpio_base = TOSA_TC6393XB_GPIO_BASE, - .setup = tosa_tc6393xb_setup, - .teardown = tosa_tc6393xb_teardown, .enable = tosa_tc6393xb_enable, .disable = tosa_tc6393xb_disable, @@ -821,26 +807,6 @@ static struct pxa2xx_spi_controller pxa_ssp_master_info = { .num_chipselect = 1, }; -static struct gpiod_lookup_table tosa_lcd_gpio_table = { - .dev_id = "spi2.0", - .table = { - GPIO_LOOKUP("tc6393xb", - TOSA_GPIO_TG_ON - TOSA_TC6393XB_GPIO_BASE, - "tg #pwr", GPIO_ACTIVE_HIGH), - { }, - }, -}; - -static struct gpiod_lookup_table tosa_lcd_bl_gpio_table = { - .dev_id = "i2c-tosa-bl", - .table = { - GPIO_LOOKUP("tc6393xb", - TOSA_GPIO_BL_C20MA - TOSA_TC6393XB_GPIO_BASE, - "backlight", GPIO_ACTIVE_HIGH), - { }, - }, -}; - static struct spi_board_info spi_board_info[] __initdata = { { .modalias = "tosa-lcd", @@ -943,6 +909,8 @@ static void __init tosa_init(void) /* enable batt_fault */ PMCR = 0x01; + gpiod_add_lookup_table(&tosa_battery_gpio_table); + gpiod_add_lookup_table(&tosa_mci_gpio_table); pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_ficp_info(&tosa_ficp_platform_data); @@ -951,8 +919,6 @@ static void __init tosa_init(void) platform_scoop_config = &tosa_pcmcia_config; pxa2xx_set_spi_info(2, &pxa_ssp_master_info); - gpiod_add_lookup_table(&tosa_lcd_gpio_table); - gpiod_add_lookup_table(&tosa_lcd_bl_gpio_table); spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL); diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/tosa.h index 8bfaca3a8b64..3b3efa0a0e22 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/tosa.h @@ -55,24 +55,6 @@ #define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL) /* - * TC6393XB GPIOs - */ -#define TOSA_TC6393XB_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 2 * 12) - -#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) -#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) -#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3) -#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4) -#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6) -#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7) -#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9) -#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10) -#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11) -#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12) -#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14) -#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) - -/* * PXA GPIOs */ #define TOSA_GPIO_POWERON (0) diff --git a/arch/arm/mach-pxa/trizeps4-pcmcia.c b/arch/arm/mach-pxa/trizeps4-pcmcia.c new file mode 100644 index 000000000000..25e363770565 --- /dev/null +++ b/arch/arm/mach-pxa/trizeps4-pcmcia.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_trizeps4.c + * + * TRIZEPS PCMCIA specific routines. + * + * Author: Jürgen Schindele + * Created: 20 02, 2006 + * Copyright: Jürgen Schindele + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> +#include <asm/irq.h> + +#include "pxa2xx-regs.h" +#include "trizeps4.h" + +#include <pcmcia/soc_common.h> + +extern void board_pcmcia_power(int power); + +static int trizeps_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + /* we dont have voltage/card/ready detection + * so we dont need interrupts for it + */ + switch (skt->nr) { + case 0: + skt->stat[SOC_STAT_CD].gpio = GPIO_PCD; + skt->stat[SOC_STAT_CD].name = "cs0_cd"; + skt->stat[SOC_STAT_RDY].gpio = GPIO_PRDY; + skt->stat[SOC_STAT_RDY].name = "cs0_rdy"; + break; + default: + break; + } + /* release the reset of this card */ + pr_debug("%s: sock %d irq %d\n", __func__, skt->nr, skt->socket.pci_irq); + + return 0; +} + +static unsigned long trizeps_pcmcia_status[2]; + +static void trizeps_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + unsigned short status = 0, change; + status = CFSR_readw(); + change = (status ^ trizeps_pcmcia_status[skt->nr]) & + ConXS_CFSR_BVD_MASK; + if (change) { + trizeps_pcmcia_status[skt->nr] = status; + if (status & ConXS_CFSR_BVD1) { + /* enable_irq empty */ + } else { + /* disable_irq empty */ + } + } + + switch (skt->nr) { + case 0: + /* just fill in fix states */ + state->bvd1 = (status & ConXS_CFSR_BVD1) ? 1 : 0; + state->bvd2 = (status & ConXS_CFSR_BVD2) ? 1 : 0; + state->vs_3v = (status & ConXS_CFSR_VS1) ? 0 : 1; + state->vs_Xv = (status & ConXS_CFSR_VS2) ? 0 : 1; + break; + +#ifndef CONFIG_MACH_TRIZEPS_CONXS + /* on ConXS we only have one slot. Second is inactive */ + case 1: + state->detect = 0; + state->ready = 0; + state->bvd1 = 0; + state->bvd2 = 0; + state->vs_3v = 0; + state->vs_Xv = 0; + break; + +#endif + } +} + +static int trizeps_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + int ret = 0; + unsigned short power = 0; + + /* we do nothing here just check a bit */ + switch (state->Vcc) { + case 0: power &= 0xfc; break; + case 33: power |= ConXS_BCR_S0_VCC_3V3; break; + case 50: + pr_err("%s(): Vcc 5V not supported in socket\n", __func__); + break; + default: + pr_err("%s(): bad Vcc %u\n", __func__, state->Vcc); + ret = -1; + } + + switch (state->Vpp) { + case 0: power &= 0xf3; break; + case 33: power |= ConXS_BCR_S0_VPP_3V3; break; + case 120: + pr_err("%s(): Vpp 12V not supported in socket\n", __func__); + break; + default: + if (state->Vpp != state->Vcc) { + pr_err("%s(): bad Vpp %u\n", __func__, state->Vpp); + ret = -1; + } + } + + switch (skt->nr) { + case 0: /* we only have 3.3V */ + board_pcmcia_power(power); + break; + +#ifndef CONFIG_MACH_TRIZEPS_CONXS + /* on ConXS we only have one slot. Second is inactive */ + case 1: +#endif + default: + break; + } + + return ret; +} + +static void trizeps_pcmcia_socket_init(struct soc_pcmcia_socket *skt) +{ + /* default is on */ + board_pcmcia_power(0x9); +} + +static void trizeps_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) +{ + board_pcmcia_power(0x0); +} + +static struct pcmcia_low_level trizeps_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = trizeps_pcmcia_hw_init, + .socket_state = trizeps_pcmcia_socket_state, + .configure_socket = trizeps_pcmcia_configure_socket, + .socket_init = trizeps_pcmcia_socket_init, + .socket_suspend = trizeps_pcmcia_socket_suspend, +#ifdef CONFIG_MACH_TRIZEPS_CONXS + .nr = 1, +#else + .nr = 2, +#endif + .first = 0, +}; + +static struct platform_device *trizeps_pcmcia_device; + +static int __init trizeps_pcmcia_init(void) +{ + int ret; + + if (!machine_is_trizeps4() && !machine_is_trizeps4wl()) + return -ENODEV; + + trizeps_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!trizeps_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(trizeps_pcmcia_device, + &trizeps_pcmcia_ops, sizeof(trizeps_pcmcia_ops)); + + if (ret == 0) + ret = platform_device_add(trizeps_pcmcia_device); + + if (ret) + platform_device_put(trizeps_pcmcia_device); + + return ret; +} + +static void __exit trizeps_pcmcia_exit(void) +{ + platform_device_unregister(trizeps_pcmcia_device); +} + +fs_initcall(trizeps_pcmcia_init); +module_exit(trizeps_pcmcia_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Juergen Schindele"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index f76f8be09554..716cce885379 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -40,13 +40,13 @@ #include <asm/mach/flash.h> #include "pxa27x.h" -#include <mach/trizeps4.h> -#include <mach/audio.h> +#include "trizeps4.h" +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/irda-pxaficp.h> #include <linux/platform_data/usb-ohci-pxa27x.h> -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/trizeps4.h index 3cddb1428c5e..b6c19d155ef9 100644 --- a/arch/arm/mach-pxa/include/mach/trizeps4.h +++ b/arch/arm/mach-pxa/trizeps4.h @@ -11,6 +11,7 @@ #ifndef _TRIPEPS4_H_ #define _TRIPEPS4_H_ +#include "addr-map.h" #include "irqs.h" /* PXA_GPIO_TO_IRQ */ /* physical memory regions */ diff --git a/arch/arm/mach-pxa/viper-pcmcia.c b/arch/arm/mach-pxa/viper-pcmcia.c new file mode 100644 index 000000000000..26599dcc49b3 --- /dev/null +++ b/arch/arm/mach-pxa/viper-pcmcia.c @@ -0,0 +1,180 @@ +/* + * Viper/Zeus PCMCIA support + * Copyright 2004 Arcom Control Systems + * + * Maintained by Marc Zyngier <maz@misterjones.org> + * + * Based on: + * iPAQ h2200 PCMCIA support + * Copyright 2004 Koen Kooi <koen@vestingbar.nl> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive for + * more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <pcmcia/ss.h> +#include <pcmcia/soc_common.h> + +#include <asm/irq.h> + +#include "viper-pcmcia.h" + +static struct platform_device *arcom_pcmcia_dev; + +static inline struct arcom_pcmcia_pdata *viper_get_pdata(void) +{ + return arcom_pcmcia_dev->dev.platform_data; +} + +static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); + unsigned long flags; + + skt->stat[SOC_STAT_CD].gpio = pdata->cd_gpio; + skt->stat[SOC_STAT_CD].name = "PCMCIA_CD"; + skt->stat[SOC_STAT_RDY].gpio = pdata->rdy_gpio; + skt->stat[SOC_STAT_RDY].name = "CF ready"; + + if (gpio_request(pdata->pwr_gpio, "CF power")) + goto err_request_pwr; + + local_irq_save(flags); + + if (gpio_direction_output(pdata->pwr_gpio, 0)) { + local_irq_restore(flags); + goto err_dir; + } + + local_irq_restore(flags); + + return 0; + +err_dir: + gpio_free(pdata->pwr_gpio); +err_request_pwr: + dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n"); + return -1; +} + +/* + * Release all resources. + */ +static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); + + gpio_free(pdata->pwr_gpio); +} + +static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->vs_3v = 1; /* Can only apply 3.3V */ + state->vs_Xv = 0; +} + +static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); + + /* Silently ignore Vpp, output enable, speaker enable. */ + pdata->reset(state->flags & SS_RESET); + + /* Apply socket voltage */ + switch (state->Vcc) { + case 0: + gpio_set_value(pdata->pwr_gpio, 0); + break; + case 33: + gpio_set_value(pdata->pwr_gpio, 1); + break; + default: + dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc); + return -1; + } + + return 0; +} + +static struct pcmcia_low_level viper_pcmcia_ops = { + .owner = THIS_MODULE, + .hw_init = viper_pcmcia_hw_init, + .hw_shutdown = viper_pcmcia_hw_shutdown, + .socket_state = viper_pcmcia_socket_state, + .configure_socket = viper_pcmcia_configure_socket, + .nr = 1, +}; + +static struct platform_device *viper_pcmcia_device; + +static int viper_pcmcia_probe(struct platform_device *pdev) +{ + int ret; + + /* I can't imagine more than one device, but you never know... */ + if (arcom_pcmcia_dev) + return -EEXIST; + + if (!pdev->dev.platform_data) + return -EINVAL; + + viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!viper_pcmcia_device) + return -ENOMEM; + + arcom_pcmcia_dev = pdev; + + viper_pcmcia_device->dev.parent = &pdev->dev; + + ret = platform_device_add_data(viper_pcmcia_device, + &viper_pcmcia_ops, + sizeof(viper_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(viper_pcmcia_device); + + if (ret) { + platform_device_put(viper_pcmcia_device); + arcom_pcmcia_dev = NULL; + } + + return ret; +} + +static int viper_pcmcia_remove(struct platform_device *pdev) +{ + platform_device_unregister(viper_pcmcia_device); + arcom_pcmcia_dev = NULL; + return 0; +} + +static struct platform_device_id viper_pcmcia_id_table[] = { + { .name = "viper-pcmcia", }, + { .name = "zeus-pcmcia", }, + { }, +}; + +static struct platform_driver viper_pcmcia_driver = { + .probe = viper_pcmcia_probe, + .remove = viper_pcmcia_remove, + .driver = { + .name = "arcom-pcmcia", + }, + .id_table = viper_pcmcia_id_table, +}; + +module_platform_driver(viper_pcmcia_driver); + +MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/viper-pcmcia.h b/arch/arm/mach-pxa/viper-pcmcia.h new file mode 100644 index 000000000000..a23b58aff9e1 --- /dev/null +++ b/arch/arm/mach-pxa/viper-pcmcia.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __ARCOM_PCMCIA_H +#define __ARCOM_PCMCIA_H + +struct arcom_pcmcia_pdata { + int cd_gpio; + int rdy_gpio; + int pwr_gpio; + void (*reset)(int state); +}; + +#endif diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 3aa34e9a15d3..5b43351ee840 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -46,10 +46,10 @@ #include <linux/syscore_ops.h> #include "pxa25x.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> -#include <mach/regs-uart.h> -#include <linux/platform_data/pcmcia-pxa2xx_viper.h> +#include "regs-uart.h" +#include "viper-pcmcia.h" #include "viper.h" #include <asm/setup.h> @@ -851,7 +851,7 @@ static void __init viper_init_vcore_gpios(void) goto err_dir; /* c/should assume redboot set the correct level ??? */ - viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1); + viper_set_core_cpu_voltage(pxa25x_get_clk_frequency_khz(0), 1); return; @@ -998,6 +998,18 @@ static struct map_desc viper_io_desc[] __initdata = { .length = 0x00800000, .type = MT_DEVICE, }, + { + /* + * ISA I/O space mapping: + * - ports 0x0000-0x0fff are PC/104 + * - ports 0x10000-0x10fff are PCMCIA slot 1 + * - ports 0x11000-0x11fff are PC/104 + */ + .virtual = PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(0x30000000), + .length = 0x1000, + .type = MT_DEVICE, + }, }; static void __init viper_map_io(void) diff --git a/arch/arm/mach-pxa/vpac270-pcmcia.c b/arch/arm/mach-pxa/vpac270-pcmcia.c new file mode 100644 index 000000000000..9fd990c8a5fb --- /dev/null +++ b/arch/arm/mach-pxa/vpac270-pcmcia.c @@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/drivers/pcmcia/pxa2xx_vpac270.c + * + * Driver for Voipac PXA270 PCMCIA and CF sockets + * + * Copyright (C) 2010-2011 Marek Vasut <marek.vasut@gmail.com> + */ + +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/mach-types.h> + +#include "vpac270.h" + +#include <pcmcia/soc_common.h> + +static struct gpio vpac270_pcmcia_gpios[] = { + { GPIO107_VPAC270_PCMCIA_PPEN, GPIOF_INIT_LOW, "PCMCIA PPEN" }, + { GPIO11_VPAC270_PCMCIA_RESET, GPIOF_INIT_LOW, "PCMCIA Reset" }, +}; + +static struct gpio vpac270_cf_gpios[] = { + { GPIO16_VPAC270_CF_RESET, GPIOF_INIT_LOW, "CF Reset" }, +}; + +static int vpac270_pcmcia_hw_init(struct soc_pcmcia_socket *skt) +{ + int ret; + + if (skt->nr == 0) { + ret = gpio_request_array(vpac270_pcmcia_gpios, + ARRAY_SIZE(vpac270_pcmcia_gpios)); + + skt->stat[SOC_STAT_CD].gpio = GPIO84_VPAC270_PCMCIA_CD; + skt->stat[SOC_STAT_CD].name = "PCMCIA CD"; + skt->stat[SOC_STAT_RDY].gpio = GPIO35_VPAC270_PCMCIA_RDY; + skt->stat[SOC_STAT_RDY].name = "PCMCIA Ready"; + } else { + ret = gpio_request_array(vpac270_cf_gpios, + ARRAY_SIZE(vpac270_cf_gpios)); + + skt->stat[SOC_STAT_CD].gpio = GPIO17_VPAC270_CF_CD; + skt->stat[SOC_STAT_CD].name = "CF CD"; + skt->stat[SOC_STAT_RDY].gpio = GPIO12_VPAC270_CF_RDY; + skt->stat[SOC_STAT_RDY].name = "CF Ready"; + } + + return ret; +} + +static void vpac270_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) +{ + if (skt->nr == 0) + gpio_free_array(vpac270_pcmcia_gpios, + ARRAY_SIZE(vpac270_pcmcia_gpios)); + else + gpio_free_array(vpac270_cf_gpios, + ARRAY_SIZE(vpac270_cf_gpios)); +} + +static void vpac270_pcmcia_socket_state(struct soc_pcmcia_socket *skt, + struct pcmcia_state *state) +{ + state->vs_3v = 1; + state->vs_Xv = 0; +} + +static int +vpac270_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, + const socket_state_t *state) +{ + if (skt->nr == 0) { + gpio_set_value(GPIO11_VPAC270_PCMCIA_RESET, + (state->flags & SS_RESET)); + gpio_set_value(GPIO107_VPAC270_PCMCIA_PPEN, + !(state->Vcc == 33 || state->Vcc == 50)); + } else { + gpio_set_value(GPIO16_VPAC270_CF_RESET, + (state->flags & SS_RESET)); + } + + return 0; +} + +static struct pcmcia_low_level vpac270_pcmcia_ops = { + .owner = THIS_MODULE, + + .first = 0, + .nr = 2, + + .hw_init = vpac270_pcmcia_hw_init, + .hw_shutdown = vpac270_pcmcia_hw_shutdown, + + .socket_state = vpac270_pcmcia_socket_state, + .configure_socket = vpac270_pcmcia_configure_socket, +}; + +static struct platform_device *vpac270_pcmcia_device; + +static int __init vpac270_pcmcia_init(void) +{ + int ret; + + if (!machine_is_vpac270()) + return -ENODEV; + + vpac270_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); + if (!vpac270_pcmcia_device) + return -ENOMEM; + + ret = platform_device_add_data(vpac270_pcmcia_device, + &vpac270_pcmcia_ops, sizeof(vpac270_pcmcia_ops)); + + if (!ret) + ret = platform_device_add(vpac270_pcmcia_device); + + if (ret) + platform_device_put(vpac270_pcmcia_device); + + return ret; +} + +static void __exit vpac270_pcmcia_exit(void) +{ + platform_device_unregister(vpac270_pcmcia_device); +} + +module_init(vpac270_pcmcia_init); +module_exit(vpac270_pcmcia_exit); + +MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); +MODULE_DESCRIPTION("PCMCIA support for Voipac PXA270"); +MODULE_ALIAS("platform:pxa2xx-pcmcia"); +MODULE_LICENSE("GPL"); diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 14505e83479e..8f74bafcf1f9 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -29,8 +29,8 @@ #include <asm/mach/arch.h> #include "pxa27x.h" -#include <mach/audio.h> -#include <mach/vpac270.h> +#include <linux/platform_data/asoc-pxa.h> +#include "vpac270.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/usb-ohci-pxa27x.h> diff --git a/arch/arm/mach-pxa/include/mach/vpac270.h b/arch/arm/mach-pxa/vpac270.h index 0cd094d8c553..0cd094d8c553 100644 --- a/arch/arm/mach-pxa/include/mach/vpac270.h +++ b/arch/arm/mach-pxa/vpac270.h diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index f485146b899f..6bb02b65fb82 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -24,9 +24,9 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <mach/hardware.h> #include "pxa25x.h" -#include <mach/smemc.h> +#include "addr-map.h" +#include "smemc.h" #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index 8e74fbb0a96e..c4d4162a7e6e 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -34,7 +34,7 @@ #include "pxa27x.h" #include "mfp-pxa27x.h" -#include <mach/z2.h> +#include "z2.h" #include <linux/platform_data/video-pxafb.h> #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/keypad-pxa27x.h> @@ -570,7 +570,6 @@ static struct pxa2xx_spi_chip z2_lbs_chip_info = { .rx_threshold = 8, .tx_threshold = 8, .timeout = 1000, - .gpio_cs = GPIO24_ZIPITZ2_WIFI_CS, }; static struct libertas_spi_platform_data z2_lbs_pdata = { @@ -584,7 +583,6 @@ static struct pxa2xx_spi_chip lms283_chip_info = { .rx_threshold = 1, .tx_threshold = 1, .timeout = 64, - .gpio_cs = GPIO88_ZIPITZ2_LCD_CS, }; static struct gpiod_lookup_table lms283_gpio_table = { @@ -624,8 +622,26 @@ static struct pxa2xx_spi_controller pxa_ssp2_master_info = { .num_chipselect = 1, }; +static struct gpiod_lookup_table pxa_ssp1_gpio_table = { + .dev_id = "spi1", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", GPIO24_ZIPITZ2_WIFI_CS, "cs", 0, GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table pxa_ssp2_gpio_table = { + .dev_id = "spi2", + .table = { + GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_ZIPITZ2_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW), + { }, + }, +}; + static void __init z2_spi_init(void) { + gpiod_add_lookup_table(&pxa_ssp1_gpio_table); + gpiod_add_lookup_table(&pxa_ssp2_gpio_table); pxa2xx_set_spi_info(1, &pxa_ssp1_master_info); pxa2xx_set_spi_info(2, &pxa_ssp2_master_info); gpiod_add_lookup_table(&lms283_gpio_table); @@ -635,6 +651,15 @@ static void __init z2_spi_init(void) static inline void z2_spi_init(void) {} #endif +static struct gpiod_lookup_table z2_audio_gpio_table = { + .dev_id = "soc-audio", + .table = { + GPIO_LOOKUP("gpio-pxa", GPIO37_ZIPITZ2_HEADSET_DETECT, + "hsdet-gpio", GPIO_ACTIVE_HIGH), + { }, + }, +}; + /****************************************************************************** * Core power regulator ******************************************************************************/ @@ -739,6 +764,8 @@ static void __init z2_init(void) z2_keys_init(); z2_pmic_init(); + gpiod_add_lookup_table(&z2_audio_gpio_table); + pm_power_off = z2_power_off; } diff --git a/arch/arm/mach-pxa/include/mach/z2.h b/arch/arm/mach-pxa/z2.h index a78b2e28b1db..a78b2e28b1db 100644 --- a/arch/arm/mach-pxa/include/mach/z2.h +++ b/arch/arm/mach-pxa/z2.h diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 97700429633e..ff0d8bb9f557 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -39,17 +39,17 @@ #include "pxa27x.h" #include "devices.h" -#include <mach/regs-uart.h> +#include "regs-uart.h" #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/mmc-pxamci.h> #include "pxa27x-udc.h" #include "udc.h" #include <linux/platform_data/video-pxafb.h> #include "pm.h" -#include <mach/audio.h> -#include <linux/platform_data/pcmcia-pxa2xx_viper.h> +#include <linux/platform_data/asoc-pxa.h> +#include "viper-pcmcia.h" #include "zeus.h" -#include <mach/smemc.h> +#include "smemc.h" #include "generic.h" @@ -929,6 +929,18 @@ static struct map_desc zeus_io_desc[] __initdata = { .length = 0x00800000, .type = MT_DEVICE, }, + { + /* + * ISA I/O space mapping: + * - ports 0x0000-0x0fff are PC/104 + * - ports 0x10000-0x10fff are PCMCIA slot 1 + * - ports 0x11000-0x11fff are PC/104 + */ + .virtual = PCI_IO_VIRT_BASE, + .pfn = __phys_to_pfn(ZEUS_PC104IO_PHYS), + .length = 0x1000, + .type = MT_DEVICE, + }, }; static void __init zeus_map_io(void) diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 79f0025fa17a..8ed75ac29b1a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -20,17 +20,19 @@ #include <linux/pwm.h> #include <linux/pwm_backlight.h> #include <linux/smc91x.h> +#include <linux/soc/pxa/cpu.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include "pxa3xx.h" -#include <mach/audio.h> +#include <linux/platform_data/asoc-pxa.h> #include <linux/platform_data/video-pxafb.h> #include "zylonite.h" #include <linux/platform_data/mmc-pxamci.h> #include <linux/platform_data/usb-ohci-pxa27x.h> #include <linux/platform_data/keypad-pxa27x.h> #include <linux/platform_data/mtd-nand-pxa3xx.h> +#include "mfp.h" #include "devices.h" #include "generic.h" @@ -424,6 +426,35 @@ static void __init zylonite_init_ohci(void) static inline void zylonite_init_ohci(void) {} #endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */ +static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio15_table = { + .dev_id = "wm97xx-touch.0", + .table = { + GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO15), + "touch", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static struct gpiod_lookup_table zylonite_wm97xx_touch_gpio26_table = { + .dev_id = "wm97xx-touch.0", + .table = { + GPIO_LOOKUP("gpio-pxa", mfp_to_gpio(MFP_PIN_GPIO26), + "touch", GPIO_ACTIVE_LOW), + { }, + }, +}; + +static void __init zylonite_init_wm97xx_touch(void) +{ + if (!IS_ENABLED(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)) + return; + + if (cpu_is_pxa320()) + gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio15_table); + else + gpiod_add_lookup_table(&zylonite_wm97xx_touch_gpio26_table); +} + static void __init zylonite_init(void) { pxa_set_ffuart_info(NULL); @@ -449,6 +480,7 @@ static void __init zylonite_init(void) zylonite_init_nand(); zylonite_init_leds(); zylonite_init_ohci(); + zylonite_init_wm97xx_touch(); } MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") diff --git a/arch/arm/mach-pxa/zylonite.h b/arch/arm/mach-pxa/zylonite.h index 7300ec2aac0d..afe3efcb8e04 100644 --- a/arch/arm/mach-pxa/zylonite.h +++ b/arch/arm/mach-pxa/zylonite.h @@ -2,6 +2,8 @@ #ifndef __ASM_ARCH_ZYLONITE_H #define __ASM_ARCH_ZYLONITE_H +#include <linux/soc/pxa/cpu.h> + #define ZYLONITE_ETH_PHYS 0x14000000 #define EXT_GPIO(x) (128 + (x)) diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c index 956fec1c4940..50a8a3547dbc 100644 --- a/arch/arm/mach-pxa/zylonite_pxa300.c +++ b/arch/arm/mach-pxa/zylonite_pxa300.c @@ -17,6 +17,7 @@ #include <linux/platform_data/i2c-pxa.h> #include <linux/platform_data/pca953x.h> #include <linux/gpio.h> +#include <linux/soc/pxa/cpu.h> #include "pxa300.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c index 94cb834f36cd..67cab4f1194b 100644 --- a/arch/arm/mach-pxa/zylonite_pxa320.c +++ b/arch/arm/mach-pxa/zylonite_pxa320.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/init.h> #include <linux/gpio.h> +#include <linux/soc/pxa/cpu.h> #include "pxa320.h" #include "zylonite.h" |