diff options
Diffstat (limited to 'arch/arm/mach-s3c2410/mach-n30.c')
| -rw-r--r-- | arch/arm/mach-s3c2410/mach-n30.c | 36 |
1 files changed, 13 insertions, 23 deletions
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 79044d9bce38..378d640ab00b 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -20,7 +20,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/delay.h> -#include <linux/device.h> +#include <linux/platform_device.h> #include <linux/kthread.h> #include <asm/mach/arch.h> @@ -97,7 +97,7 @@ static struct s3c24xx_board n30_board __initdata = { .devices_count = ARRAY_SIZE(n30_devices) }; -void __init n30_map_io(void) +static void __init n30_map_io(void) { s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc)); s3c24xx_init_clocks(0); @@ -105,39 +105,29 @@ void __init n30_map_io(void) s3c24xx_set_board(&n30_board); } -void __init n30_init_irq(void) +static void __init n30_init_irq(void) { s3c24xx_init_irq(); } +/* GPB3 is the line that controls the pull-up for the USB D+ line */ -static int n30_usbstart_thread(void *unused) +static void __init n30_init(void) { + s3c_device_i2c.dev.platform_data = &n30_i2ccfg; + /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ - writel(readl(S3C2410_MISCCR) & ~0x00003008, S3C2410_MISCCR); - - /* Turn off the D+ pull up for 3 seconds so that the USB host - * at the other end will do a rescan of the USB bus. */ - s3c2410_gpio_setpin(S3C2410_GPB3, 0); - - msleep_interruptible(3*HZ); - - s3c2410_gpio_setpin(S3C2410_GPB3, 1); - - return 0; -} - - -void __init n30_init(void) -{ - s3c_device_i2c.dev.platform_data = &n30_i2ccfg; - kthread_run(n30_usbstart_thread, NULL, "n30_usbstart"); + s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | + S3C2410_MISCCR_USBSUSPND0 | + S3C2410_MISCCR_USBSUSPND1, 0x0); } MACHINE_START(N30, "Acer-N30") - /* Maintainer: Christer Weinigel <christer@weinigel.se>, Ben Dooks <ben-linux@fluff.org> */ + /* Maintainer: Christer Weinigel <christer@weinigel.se>, + Ben Dooks <ben-linux@fluff.org> + */ .phys_ram = S3C2410_SDRAM_PA, .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, |