diff options
Diffstat (limited to 'arch/arm/mach-sa1100')
| -rw-r--r-- | arch/arm/mach-sa1100/Kconfig | 36 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/Makefile.boot | 9 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/assabet.c | 29 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/collie.c | 41 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/generic.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/hackkit.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/include/mach/reset.h | 1 | ||||
| -rw-r--r-- | arch/arm/mach-sa1100/shannon.c | 9 |
8 files changed, 92 insertions, 41 deletions
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig index 66e79fa9ba2b..fb9cd10705de 100644 --- a/arch/arm/mach-sa1100/Kconfig +++ b/arch/arm/mach-sa1100/Kconfig @@ -1,7 +1,25 @@ # SPDX-License-Identifier: GPL-2.0-only -if ARCH_SA1100 +menuconfig ARCH_SA1100 + bool "SA11x0 Implementations" + depends on ARCH_MULTI_V4 && !(ARCH_MULTI_V4T || ARCH_MULTI_V5) + depends on !(ARCH_MOXART || ARCH_GEMINI) + depends on ATAGS + depends on CPU_LITTLE_ENDIAN + depends on MMU + select ARCH_NO_SG_CHAIN + select ARCH_MTD_XIP + select CLKSRC_MMIO + select CLKSRC_PXA + select CPU_FREQ + select CPU_SA1100 + select GPIOLIB + select IRQ_DOMAIN + select ISA + select NEED_MACH_MEMORY_H + help + Support for StrongARM 11x0 based boards. -menu "SA11x0 Implementations" +if ARCH_SA1100 config SA1100_ASSABET bool "Assabet" @@ -25,6 +43,7 @@ config ASSABET_NEPONSET config SA1100_CERF bool "CerfBoard" + depends on UNUSED_BOARD_FILES select ARM_SA1110_CPUFREQ select LEDS_GPIO_REGISTER help @@ -62,6 +81,7 @@ config SA1100_COLLIE config SA1100_H3100 bool "Compaq iPAQ H3100" + depends on UNUSED_BOARD_FILES select ARM_SA1110_CPUFREQ select HTC_EGPIO select MFD_IPAQ_MICRO @@ -80,6 +100,7 @@ config SA1100_H3600 config SA1100_BADGE4 bool "HP Labs BadgePAD 4" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ select SA1111 help @@ -88,6 +109,7 @@ config SA1100_BADGE4 config SA1100_JORNADA720 bool "HP Jornada 720" + depends on UNUSED_BOARD_FILES # FIXME: select ARM_SA11x0_CPUFREQ select SA1111 help @@ -107,6 +129,7 @@ config SA1100_JORNADA720_SSP config SA1100_HACKKIT bool "HackKit Core CPU Board" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ help Say Y here to support the HackKit Core CPU Board @@ -114,6 +137,7 @@ config SA1100_HACKKIT config SA1100_LART bool "LART" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ help Say Y here if you are using the Linux Advanced Radio Terminal @@ -122,6 +146,7 @@ config SA1100_LART config SA1100_NANOENGINE bool "nanoEngine" + depends on UNUSED_BOARD_FILES select ARM_SA1110_CPUFREQ select FORCE_PCI select PCI_NANOENGINE @@ -132,6 +157,7 @@ config SA1100_NANOENGINE config SA1100_PLEB bool "PLEB" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ help Say Y here if you are using version 1 of the Portable Linux @@ -141,6 +167,7 @@ config SA1100_PLEB config SA1100_SHANNON bool "Shannon" + depends on UNUSED_BOARD_FILES select ARM_SA1100_CPUFREQ select REGULATOR select REGULATOR_FIXED_VOLTAGE @@ -152,6 +179,7 @@ config SA1100_SHANNON config SA1100_SIMPAD bool "Simpad" + depends on UNUSED_BOARD_FILES select ARM_SA1110_CPUFREQ help The SIEMENS webpad SIMpad is based on the StrongARM 1110. There @@ -163,12 +191,10 @@ config SA1100_SIMPAD config SA1100_SSP tristate "Generic PIO SSP" + depends on UNUSED_BOARD_FILES help Say Y here to enable support for the generic PIO SSP driver. This isn't for audio support, but for attached sensors and other devices, eg for BadgePAD 4 sensor support. -endmenu - endif - diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot deleted file mode 100644 index 9d8246f2cab4..000000000000 --- a/arch/arm/mach-sa1100/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -ifeq ($(CONFIG_SA1111),y) - zreladdr-y += 0xc0208000 -else - zreladdr-y += 0xc0008000 -endif -params_phys-y := 0xc0000100 -initrd_phys-y := 0xc0800000 - diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index d96a101e5504..9919e0f32c4b 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -34,7 +34,6 @@ #include <asm/setup.h> #include <asm/page.h> #include <asm/pgtable-hwdef.h> -#include <asm/pgtable.h> #include <asm/tlbflush.h> #include <asm/mach/arch.h> @@ -85,7 +84,7 @@ void ASSABET_BCR_frob(unsigned int mask, unsigned int val) } EXPORT_SYMBOL(ASSABET_BCR_frob); -static int __init assabet_init_gpio(void __iomem *reg, u32 def_val) +static void __init assabet_init_gpio(void __iomem *reg, u32 def_val) { struct gpio_chip *gc; @@ -95,11 +94,9 @@ static int __init assabet_init_gpio(void __iomem *reg, u32 def_val) assabet_names, NULL, NULL); if (IS_ERR(gc)) - return PTR_ERR(gc); + return; assabet_bcr_gc = gc; - - return gc->base; } /* @@ -476,16 +473,23 @@ static struct gpiod_lookup_table assabet_cf_vcc_gpio_table = { }, }; +static struct gpiod_lookup_table assabet_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + GPIO_LOOKUP("assabet", 13, NULL, GPIO_ACTIVE_LOW), + GPIO_LOOKUP("assabet", 14, NULL, GPIO_ACTIVE_LOW), + { }, + }, +}; + static struct gpio_led assabet_leds[] __initdata = { { .name = "assabet:red", .default_trigger = "cpu0", - .active_low = 1, .default_state = LEDS_GPIO_DEFSTATE_KEEP, }, { .name = "assabet:green", .default_trigger = "heartbeat", - .active_low = 1, .default_state = LEDS_GPIO_DEFSTATE_KEEP, }, }; @@ -604,6 +608,7 @@ static void __init assabet_init(void) &assabet_keys_pdata, sizeof(assabet_keys_pdata)); + gpiod_add_lookup_table(&assabet_leds_gpio_table); gpio_led_register_device(-1, &assabet_leds_pdata); #ifndef ASSABET_PAL_VIDEO @@ -633,7 +638,7 @@ static void __init map_sa1100_gpio_regs( void ) int prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_DOMAIN(DOMAIN_IO); pmd_t *pmd; - pmd = pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt); + pmd = pmd_off_k(virt); *pmd = __pmd(phys | prot); flush_pmd_entry(pmd); } @@ -653,7 +658,7 @@ static void __init map_sa1100_gpio_regs( void ) */ static void __init get_assabet_scr(void) { - unsigned long uninitialized_var(scr), i; + unsigned long scr, i; GPDR |= 0x3fc; /* Configure GPIO 9:2 as outputs */ GPSR = 0x3fc; /* Write 0xFF to GPIO 9:2 */ @@ -740,7 +745,6 @@ static void __init assabet_map_io(void) void __init assabet_init_irq(void) { - unsigned int assabet_gpio_base; u32 def_val; sa1100_init_irq(); @@ -755,10 +759,7 @@ void __init assabet_init_irq(void) * * This must precede any driver calls to BCR_set() or BCR_clear(). */ - assabet_gpio_base = assabet_init_gpio((void *)&ASSABET_BCR, def_val); - - assabet_leds[0].gpio = assabet_gpio_base + 13; - assabet_leds[1].gpio = assabet_gpio_base + 14; + assabet_init_gpio((void *)&ASSABET_BCR, def_val); } MACHINE_START(ASSABET, "Intel-Assabet") diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 3cc2b71e16f0..14c33ed05318 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -30,6 +30,7 @@ #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/gpio/machine.h> #include <linux/power/gpio-charger.h> #include <video/sa1100fb.h> @@ -97,6 +98,26 @@ static struct mcp_plat_data collie_mcp_data = { .codec_pdata = &collie_ucb1x00_data, }; +/* Battery management GPIOs */ +static struct gpiod_lookup_table collie_battery_gpiod_table = { + /* the MCP codec mcp0 has the ucb1x00 as attached device */ + .dev_id = "ucb1x00", + .table = { + /* This is found on the main GPIO on the SA1100 */ + GPIO_LOOKUP("gpio", COLLIE_GPIO_CO, + "main battery full", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio", COLLIE_GPIO_MAIN_BAT_LOW, + "main battery low", GPIO_ACTIVE_HIGH), + /* + * This is GPIO 0 on the Scoop expander, which is registered + * from common/scoop.c with this gpio chip label. + */ + GPIO_LOOKUP("sharp-scoop", 0, + "main charge on", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static int collie_ir_startup(struct device *dev) { int rc = gpio_request(COLLIE_GPIO_IR_ON, "IrDA"); @@ -131,16 +152,23 @@ static struct irda_platform_data collie_ir_data = { /* * Collie AC IN */ +static struct gpiod_lookup_table collie_power_gpiod_table = { + .dev_id = "gpio-charger", + .table = { + GPIO_LOOKUP("gpio", COLLIE_GPIO_AC_IN, + NULL, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static char *collie_ac_supplied_to[] = { "main-battery", "backup-battery", }; - static struct gpio_charger_platform_data collie_power_data = { .name = "charger", .type = POWER_SUPPLY_TYPE_MAINS, - .gpio = COLLIE_GPIO_AC_IN, .supplied_to = collie_ac_supplied_to, .num_supplicants = ARRAY_SIZE(collie_ac_supplied_to), }; @@ -196,18 +224,12 @@ static int collie_uart_probe(struct locomo_dev *dev) return 0; } -static int collie_uart_remove(struct locomo_dev *dev) -{ - return 0; -} - static struct locomo_driver collie_uart_driver = { .drv = { .name = "collie_uart", }, .devid = LOCOMO_DEVID_UART, .probe = collie_uart_probe, - .remove = collie_uart_remove, }; static int __init collie_uart_init(void) @@ -386,6 +408,9 @@ static void __init collie_init(void) platform_scoop_config = &collie_pcmcia_config; + gpiod_add_lookup_table(&collie_power_gpiod_table); + gpiod_add_lookup_table(&collie_battery_gpiod_table); + ret = platform_add_devices(devices, ARRAY_SIZE(devices)); if (ret) { printk(KERN_WARNING "collie: Unable to register LoCoMo device\n"); diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 4dfb7554649d..6c21f214cd60 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -39,9 +39,6 @@ #include "generic.h" #include <clocksource/pxa.h> -unsigned int reset_status; -EXPORT_SYMBOL(reset_status); - #define NR_FREQS 16 /* @@ -319,10 +316,13 @@ static struct platform_device *sa11x0_devices[] __initdata = { static int __init sa1100_init(void) { + struct resource wdt_res = DEFINE_RES_MEM(0x90000000, 0x20); pm_power_off = sa1100_power_off; regulator_has_full_constraints(); + platform_device_register_simple("sa1100_wdt", -1, &wdt_res, 1); + return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices)); } diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c index 6d37d263e0d2..3085f1c2e586 100644 --- a/arch/arm/mach-sa1100/hackkit.c +++ b/arch/arm/mach-sa1100/hackkit.c @@ -22,11 +22,11 @@ #include <linux/gpio.h> #include <linux/leds.h> #include <linux/platform_device.h> +#include <linux/pgtable.h> #include <asm/mach-types.h> #include <asm/setup.h> #include <asm/page.h> -#include <asm/pgtable.h> #include <asm/mach/arch.h> #include <asm/mach/flash.h> diff --git a/arch/arm/mach-sa1100/include/mach/reset.h b/arch/arm/mach-sa1100/include/mach/reset.h index 27695650a567..a6723d45ae2a 100644 --- a/arch/arm/mach-sa1100/include/mach/reset.h +++ b/arch/arm/mach-sa1100/include/mach/reset.h @@ -10,7 +10,6 @@ #define RESET_STATUS_GPIO (1 << 3) /* GPIO Reset */ #define RESET_STATUS_ALL (0xf) -extern unsigned int reset_status; static inline void clear_reset_status(unsigned int mask) { RCSR = mask; diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 5bc82e2671c6..351f891b4842 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -104,6 +104,14 @@ static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = { .enabled_at_boot = 1, }; +static struct gpiod_lookup_table shannon_display_gpio_table = { + .dev_id = "sa11x0-fb", + .table = { + GPIO_LOOKUP("gpio", 22, "shannon-lcden", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init shannon_init(void) { sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata, @@ -113,6 +121,7 @@ static void __init shannon_init(void) sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table); sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table); sa11x0_ppc_configure_mcp(); + gpiod_add_lookup_table(&shannon_display_gpio_table); sa11x0_register_lcd(&shannon_lcd_info); sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); sa11x0_register_mcp(&shannon_mcp_data); |