aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-u300/core.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-u300/core.c')
-rw-r--r--arch/arm/mach-u300/core.c649
1 files changed, 649 insertions, 0 deletions
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
new file mode 100644
index 000000000000..89b3ccf35e1b
--- /dev/null
+++ b/arch/arm/mach-u300/core.c
@@ -0,0 +1,649 @@
+/*
+ *
+ * arch/arm/mach-u300/core.c
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Core platform support, IRQ handling and device definitions.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mm.h>
+#include <linux/termios.h>
+#include <linux/amba/bus.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/types.h>
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/hardware/vic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+#include "clock.h"
+#include "mmc.h"
+
+/*
+ * Static I/O mappings that are needed for booting the U300 platforms. The
+ * only things we need are the areas where we find the timer, syscon and
+ * intcon, since the remaining device drivers will map their own memory
+ * physical to virtual as the need arise.
+ */
+static struct map_desc u300_io_desc[] __initdata = {
+ {
+ .virtual = U300_SLOW_PER_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_SLOW_PER_PHYS_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = U300_AHB_PER_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_AHB_PER_PHYS_BASE),
+ .length = SZ_32K,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = U300_FAST_PER_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_FAST_PER_PHYS_BASE),
+ .length = SZ_32K,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = 0xffff2000, /* TCM memory */
+ .pfn = __phys_to_pfn(0xffff2000),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ },
+
+ /*
+ * This overlaps with the IRQ vectors etc at 0xffff0000, so these
+ * may have to be moved to 0x00000000 in order to use the ROM.
+ */
+ /*
+ {
+ .virtual = U300_BOOTROM_VIRT_BASE,
+ .pfn = __phys_to_pfn(U300_BOOTROM_PHYS_BASE),
+ .length = SZ_64K,
+ .type = MT_ROM,
+ },
+ */
+};
+
+void __init u300_map_io(void)
+{
+ iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+}
+
+/*
+ * Declaration of devices found on the U300 board and
+ * their respective memory locations.
+ */
+static struct amba_device uart0_device = {
+ .dev = {
+ .init_name = "uart0", /* Slow device at 0x3000 offset */
+ .platform_data = NULL,
+ },
+ .res = {
+ .start = U300_UART0_BASE,
+ .end = U300_UART0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { IRQ_U300_UART0, NO_IRQ },
+};
+
+/* The U335 have an additional UART1 on the APP CPU */
+#ifdef CONFIG_MACH_U300_BS335
+static struct amba_device uart1_device = {
+ .dev = {
+ .init_name = "uart1", /* Fast device at 0x7000 offset */
+ .platform_data = NULL,
+ },
+ .res = {
+ .start = U300_UART1_BASE,
+ .end = U300_UART1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { IRQ_U300_UART1, NO_IRQ },
+};
+#endif
+
+static struct amba_device pl172_device = {
+ .dev = {
+ .init_name = "pl172", /* AHB device at 0x4000 offset */
+ .platform_data = NULL,
+ },
+ .res = {
+ .start = U300_EMIF_CFG_BASE,
+ .end = U300_EMIF_CFG_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+
+/*
+ * Everything within this next ifdef deals with external devices connected to
+ * the APP SPI bus.
+ */
+static struct amba_device pl022_device = {
+ .dev = {
+ .coherent_dma_mask = ~0,
+ .init_name = "pl022", /* Fast device at 0x6000 offset */
+ },
+ .res = {
+ .start = U300_SPI_BASE,
+ .end = U300_SPI_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_U300_SPI, NO_IRQ },
+ /*
+ * This device has a DMA channel but the Linux driver does not use
+ * it currently.
+ */
+};
+
+static struct amba_device mmcsd_device = {
+ .dev = {
+ .init_name = "mmci", /* Fast device at 0x1000 offset */
+ .platform_data = NULL, /* Added later */
+ },
+ .res = {
+ .start = U300_MMCSD_BASE,
+ .end = U300_MMCSD_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = {IRQ_U300_MMCSD_MCIINTR0, IRQ_U300_MMCSD_MCIINTR1 },
+ /*
+ * This device has a DMA channel but the Linux driver does not use
+ * it currently.
+ */
+};
+
+/*
+ * The order of device declaration may be important, since some devices
+ * have dependencies on other devices being initialized first.
+ */
+static struct amba_device *amba_devs[] __initdata = {
+ &uart0_device,
+#ifdef CONFIG_MACH_U300_BS335
+ &uart1_device,
+#endif
+ &pl022_device,
+ &pl172_device,
+ &mmcsd_device,
+};
+
+/* Here follows a list of all hw resources that the platform devices
+ * allocate. Note, clock dependencies are not included
+ */
+
+static struct resource gpio_resources[] = {
+ {
+ .start = U300_GPIO_BASE,
+ .end = (U300_GPIO_BASE + SZ_4K - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "gpio0",
+ .start = IRQ_U300_GPIO_PORT0,
+ .end = IRQ_U300_GPIO_PORT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "gpio1",
+ .start = IRQ_U300_GPIO_PORT1,
+ .end = IRQ_U300_GPIO_PORT1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "gpio2",
+ .start = IRQ_U300_GPIO_PORT2,
+ .end = IRQ_U300_GPIO_PORT2,
+ .flags = IORESOURCE_IRQ,
+ },
+#ifdef U300_COH901571_3
+ {
+ .name = "gpio3",
+ .start = IRQ_U300_GPIO_PORT3,
+ .end = IRQ_U300_GPIO_PORT3,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "gpio4",
+ .start = IRQ_U300_GPIO_PORT4,
+ .end = IRQ_U300_GPIO_PORT4,
+ .flags = IORESOURCE_IRQ,
+ },
+#ifdef CONFIG_MACH_U300_BS335
+ {
+ .name = "gpio5",
+ .start = IRQ_U300_GPIO_PORT5,
+ .end = IRQ_U300_GPIO_PORT5,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "gpio6",
+ .start = IRQ_U300_GPIO_PORT6,
+ .end = IRQ_U300_GPIO_PORT6,
+ .flags = IORESOURCE_IRQ,
+ },
+#endif /* CONFIG_MACH_U300_BS335 */
+#endif /* U300_COH901571_3 */
+};
+
+static struct resource keypad_resources[] = {
+ {
+ .start = U300_KEYPAD_BASE,
+ .end = U300_KEYPAD_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "coh901461-press",
+ .start = IRQ_U300_KEYPAD_KEYBF,
+ .end = IRQ_U300_KEYPAD_KEYBF,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "coh901461-release",
+ .start = IRQ_U300_KEYPAD_KEYBR,
+ .end = IRQ_U300_KEYPAD_KEYBR,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource rtc_resources[] = {
+ {
+ .start = U300_RTC_BASE,
+ .end = U300_RTC_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_RTC,
+ .end = IRQ_U300_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+/*
+ * Fsmc does have IRQs: #43 and #44 (NFIF and NFIF2)
+ * but these are not yet used by the driver.
+ */
+static struct resource fsmc_resources[] = {
+ {
+ .start = U300_NAND_IF_PHYS_BASE,
+ .end = U300_NAND_IF_PHYS_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource i2c0_resources[] = {
+ {
+ .start = U300_I2C0_BASE,
+ .end = U300_I2C0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_I2C0,
+ .end = IRQ_U300_I2C0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource i2c1_resources[] = {
+ {
+ .start = U300_I2C1_BASE,
+ .end = U300_I2C1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_I2C1,
+ .end = IRQ_U300_I2C1,
+ .flags = IORESOURCE_IRQ,
+ },
+
+};
+
+static struct resource wdog_resources[] = {
+ {
+ .start = U300_WDOG_BASE,
+ .end = U300_WDOG_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_U300_WDOG,
+ .end = IRQ_U300_WDOG,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+/* TODO: These should be protected by suitable #ifdef's */
+static struct resource ave_resources[] = {
+ {
+ .name = "AVE3e I/O Area",
+ .start = U300_VIDEOENC_BASE,
+ .end = U300_VIDEOENC_BASE + SZ_512K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "AVE3e IRQ0",
+ .start = IRQ_U300_VIDEO_ENC_0,
+ .end = IRQ_U300_VIDEO_ENC_0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "AVE3e IRQ1",
+ .start = IRQ_U300_VIDEO_ENC_1,
+ .end = IRQ_U300_VIDEO_ENC_1,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .name = "AVE3e Physmem Area",
+ .start = 0, /* 0 will be remapped to reserved memory */
+ .end = SZ_1M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /*
+ * The AVE3e requires two regions of 256MB that it considers
+ * "invisible". The hardware will not be able to access these
+ * adresses, so they should never point to system RAM.
+ */
+ {
+ .name = "AVE3e Reserved 0",
+ .start = 0xd0000000,
+ .end = 0xd0000000 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "AVE3e Reserved 1",
+ .start = 0xe0000000,
+ .end = 0xe0000000 + SZ_256M - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device wdog_device = {
+ .name = "wdog",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(wdog_resources),
+ .resource = wdog_resources,
+};
+
+static struct platform_device i2c0_device = {
+ .name = "stddci2c",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(i2c0_resources),
+ .resource = i2c0_resources,
+};
+
+static struct platform_device i2c1_device = {
+ .name = "stddci2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(i2c1_resources),
+ .resource = i2c1_resources,
+};
+
+static struct platform_device gpio_device = {
+ .name = "u300-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(gpio_resources),
+ .resource = gpio_resources,
+};
+
+static struct platform_device keypad_device = {
+ .name = "keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(keypad_resources),
+ .resource = keypad_resources,
+};
+
+static struct platform_device rtc_device = {
+ .name = "rtc0",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+static struct platform_device fsmc_device = {
+ .name = "nandif",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(fsmc_resources),
+ .resource = fsmc_resources,
+};
+
+static struct platform_device ave_device = {
+ .name = "video_enc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ave_resources),
+ .resource = ave_resources,
+};
+
+/*
+ * Notice that AMBA devices are initialized before platform devices.
+ *
+ */
+static struct platform_device *platform_devs[] __initdata = {
+ &i2c0_device,
+ &i2c1_device,
+ &keypad_device,
+ &rtc_device,
+ &gpio_device,
+ &fsmc_device,
+ &wdog_device,
+ &ave_device
+};
+
+
+/*
+ * Interrupts: the U300 platforms have two pl190 ARM PrimeCells connected
+ * together so some interrupts are connected to the first one and some
+ * to the second one.
+ */
+void __init u300_init_irq(void)
+{
+ u32 mask[2] = {0, 0};
+ int i;
+
+ for (i = 0; i < NR_IRQS; i++)
+ set_bit(i, (unsigned long *) &mask[0]);
+ u300_enable_intcon_clock();
+ vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], 0);
+ vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], 0);
+}
+
+
+/*
+ * U300 platforms peripheral handling
+ */
+struct db_chip {
+ u16 chipid;
+ const char *name;
+};
+
+/*
+ * This is a list of the Digital Baseband chips used in the U300 platform.
+ */
+static struct db_chip db_chips[] __initdata = {
+ {
+ .chipid = 0xb800,
+ .name = "DB3000",
+ },
+ {
+ .chipid = 0xc000,
+ .name = "DB3100",
+ },
+ {
+ .chipid = 0xc800,
+ .name = "DB3150",
+ },
+ {
+ .chipid = 0xd800,
+ .name = "DB3200",
+ },
+ {
+ .chipid = 0xe000,
+ .name = "DB3250",
+ },
+ {
+ .chipid = 0xe800,
+ .name = "DB3210",
+ },
+ {
+ .chipid = 0xf000,
+ .name = "DB3350 P1x",
+ },
+ {
+ .chipid = 0xf100,
+ .name = "DB3350 P2x",
+ },
+ {
+ .chipid = 0x0000, /* List terminator */
+ .name = NULL,
+ }
+};
+
+static void u300_init_check_chip(void)
+{
+
+ u16 val;
+ struct db_chip *chip;
+ const char *chipname;
+ const char unknown[] = "UNKNOWN";
+
+ /* Read out and print chip ID */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CIDR);
+ /* This is in funky bigendian order... */
+ val = (val & 0xFFU) << 8 | (val >> 8);
+ chip = db_chips;
+ chipname = unknown;
+
+ for ( ; chip->chipid; chip++) {
+ if (chip->chipid == (val & 0xFF00U)) {
+ chipname = chip->name;
+ break;
+ }
+ }
+ printk(KERN_INFO "Initializing U300 system on %s baseband chip " \
+ "(chip ID 0x%04x)\n", chipname, val);
+
+#ifdef CONFIG_MACH_U300_BS26
+ if ((val & 0xFF00U) != 0xc800) {
+ printk(KERN_ERR "Platform configured for BS25/BS26 " \
+ "with DB3150 but %s detected, expect problems!",
+ chipname);
+ }
+#endif
+#ifdef CONFIG_MACH_U300_BS330
+ if ((val & 0xFF00U) != 0xd800) {
+ printk(KERN_ERR "Platform configured for BS330 " \
+ "with DB3200 but %s detected, expect problems!",
+ chipname);
+ }
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+ if ((val & 0xFF00U) != 0xf000 && (val & 0xFF00U) != 0xf100) {
+ printk(KERN_ERR "Platform configured for BS365 " \
+ " with DB3350 but %s detected, expect problems!",
+ chipname);
+ }
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+ if ((val & 0xFF00U) != 0xe800) {
+ printk(KERN_ERR "Platform configured for BS365 " \
+ "with DB3210 but %s detected, expect problems!",
+ chipname);
+ }
+#endif
+
+
+}
+
+/*
+ * Some devices and their resources require reserved physical memory from
+ * the end of the available RAM. This function traverses the list of devices
+ * and assigns actual adresses to these.
+ */
+static void __init u300_assign_physmem(void)
+{
+ unsigned long curr_start = __pa(high_memory);
+ int i, j;
+
+ for (i = 0; i < ARRAY_SIZE(platform_devs); i++) {
+ for (j = 0; j < platform_devs[i]->num_resources; j++) {
+ struct resource *const res =
+ &platform_devs[i]->resource[j];
+
+ if (IORESOURCE_MEM == res->flags &&
+ 0 == res->start) {
+ res->start = curr_start;
+ res->end += curr_start;
+ curr_start += (res->end - res->start + 1);
+
+ printk(KERN_INFO "core.c: Mapping RAM " \
+ "%#x-%#x to device %s:%s\n",
+ res->start, res->end,
+ platform_devs[i]->name, res->name);
+ }
+ }
+ }
+}
+
+void __init u300_init_devices(void)
+{
+ int i;
+ u16 val;
+
+ /* Check what platform we run and print some status information */
+ u300_init_check_chip();
+
+ /* Set system to run at PLL208, max performance, a known state. */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
+ /* Wait for the PLL208 to lock if not locked in yet */
+ while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
+ U300_SYSCON_CSR_PLL208_LOCK_IND));
+
+ /* Register the AMBA devices in the AMBA bus abstraction layer */
+ u300_clock_primecells();
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+ u300_unclock_primecells();
+
+ u300_assign_physmem();
+
+ /* Register the platform devices */
+ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+#ifndef CONFIG_MACH_U300_SEMI_IS_SHARED
+ /*
+ * Enable SEMI self refresh. Self-refresh of the SDRAM is entered when
+ * both subsystems are requesting this mode.
+ * If we not share the Acc SDRAM, this is never the case. Therefore
+ * enable it here from the App side.
+ */
+ val = readw(U300_SYSCON_VBASE + U300_SYSCON_SMCR) |
+ U300_SYSCON_SMCR_SEMI_SREFREQ_ENABLE;
+ writew(val, U300_SYSCON_VBASE + U300_SYSCON_SMCR);
+#endif /* CONFIG_MACH_U300_SEMI_IS_SHARED */
+}
+
+static int core_module_init(void)
+{
+ /*
+ * This needs to be initialized later: it needs the input framework
+ * to be initialized first.
+ */
+ return mmc_init(&mmcsd_device);
+}
+module_init(core_module_init);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.