diff options
Diffstat (limited to 'arch/arm/mach-vexpress')
| -rw-r--r-- | arch/arm/mach-vexpress/Kconfig | 1 | ||||
| -rw-r--r-- | arch/arm/mach-vexpress/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-vexpress/dcscb.c | 77 | ||||
| -rw-r--r-- | arch/arm/mach-vexpress/dcscb_setup.S | 38 |
4 files changed, 98 insertions, 20 deletions
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 2f46385c2819..b8bbabec6310 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -60,6 +60,7 @@ config ARCH_VEXPRESS_CA9X4 config ARCH_VEXPRESS_DCSCB bool "Dual Cluster System Control Block (DCSCB) support" depends on MCPM + select ARM_CCI help Support for the Dual Cluster System Configuration Block (DCSCB). This is needed to provide CPU and cluster power management diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 518519f57a5e..48ba89a8149f 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -6,6 +6,6 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o -obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o +obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c index 44aa7b040e82..16d57a8a9d5a 100644 --- a/arch/arm/mach-vexpress/dcscb.c +++ b/arch/arm/mach-vexpress/dcscb.c @@ -16,6 +16,7 @@ #include <linux/errno.h> #include <linux/of_address.h> #include <linux/vexpress.h> +#include <linux/arm-cci.h> #include <asm/mcpm.h> #include <asm/proc-fns.h> @@ -105,7 +106,10 @@ static void dcscb_power_down(void) pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); BUG_ON(cpu >= 4 || cluster >= 2); + __mcpm_cpu_going_down(cpu, cluster); + arch_spin_lock(&dcscb_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); dcscb_use_count[cpu][cluster]--; if (dcscb_use_count[cpu][cluster] == 0) { rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); @@ -125,31 +129,59 @@ static void dcscb_power_down(void) skip_wfi = true; } else BUG(); - arch_spin_unlock(&dcscb_lock); - - /* - * Now let's clean our L1 cache and shut ourself down. - * If we're the last CPU in this cluster then clean L2 too. - */ - /* - * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need - * a preliminary flush here for those CPUs. At least, that's - * the theory -- without the extra flush, Linux explodes on - * RTSM (to be investigated).. - */ - flush_cache_louis(); - set_cr(get_cr() & ~CR_C); + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&dcscb_lock); - if (!last_man) { - flush_cache_louis(); - } else { + /* + * Flush all cache levels for this cluster. + * + * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need + * a preliminary flush here for those CPUs. At least, that's + * the theory -- without the extra flush, Linux explodes on + * RTSM (to be investigated). + */ + flush_cache_all(); + set_cr(get_cr() & ~CR_C); flush_cache_all(); + + /* + * This is a harmless no-op. On platforms with a real + * outer cache this might either be needed or not, + * depending on where the outer cache sits. + */ outer_flush_all(); + + /* Disable local coherency by clearing the ACTLR "SMP" bit: */ + set_auxcr(get_auxcr() & ~(1 << 6)); + + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(mpidr); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + arch_spin_unlock(&dcscb_lock); + + /* + * Flush the local CPU cache. + * + * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need + * a preliminary flush here for those CPUs. At least, that's + * the theory -- without the extra flush, Linux explodes on + * RTSM (to be investigated). + */ + flush_cache_louis(); + set_cr(get_cr() & ~CR_C); + flush_cache_louis(); + + /* Disable local coherency by clearing the ACTLR "SMP" bit: */ + set_auxcr(get_auxcr() & ~(1 << 6)); } - /* Disable local coherency by clearing the ACTLR "SMP" bit: */ - set_auxcr(get_auxcr() & ~(1 << 6)); + __mcpm_cpu_down(cpu, cluster); /* Now we are prepared for power-down, do it: */ dsb(); @@ -177,12 +209,17 @@ static void __init dcscb_usage_count_init(void) dcscb_use_count[cpu][cluster] = 1; } +extern void dcscb_power_up_setup(unsigned int affinity_level); + static int __init dcscb_init(void) { struct device_node *node; unsigned int cfg; int ret; + if (!cci_probed()) + return -ENODEV; + node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb"); if (!node) return -ENODEV; @@ -195,6 +232,8 @@ static int __init dcscb_init(void) dcscb_usage_count_init(); ret = mcpm_platform_register(&dcscb_power_ops); + if (!ret) + ret = mcpm_sync_init(dcscb_power_up_setup); if (ret) { iounmap(dcscb_base); return ret; diff --git a/arch/arm/mach-vexpress/dcscb_setup.S b/arch/arm/mach-vexpress/dcscb_setup.S new file mode 100644 index 000000000000..4bb7fbe0f621 --- /dev/null +++ b/arch/arm/mach-vexpress/dcscb_setup.S @@ -0,0 +1,38 @@ +/* + * arch/arm/include/asm/dcscb_setup.S + * + * Created by: Dave Martin, 2012-06-22 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + + +ENTRY(dcscb_power_up_setup) + + cmp r0, #0 @ check affinity level + beq 2f + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + * The ACTLR SMP bit does not need to be set here, because cpu_resume() + * already restores that. + * + * A15/A7 may not require explicit L2 invalidation on reset, dependent + * on hardware integration decisions. + * For now, this code assumes that L2 is either already invalidated, + * or invalidation is not required. + */ + + b cci_enable_port_for_self + +2: @ Implementation-specific local CPU setup operations should go here, + @ if any. In this case, there is nothing to do. + + bx lr + +ENDPROC(dcscb_power_up_setup) |