diff options
Diffstat (limited to 'arch/arm/plat-omap/include/plat')
25 files changed, 174 insertions, 770 deletions
diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h deleted file mode 100644 index 56e7f2e7d12f..000000000000 --- a/arch/arm/plat-omap/include/plat/blizzard.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _BLIZZARD_H -#define _BLIZZARD_H - -struct blizzard_platform_data { - void (*power_up)(struct device *dev); - void (*power_down)(struct device *dev); - unsigned long (*get_clock_rate)(struct device *dev); - - unsigned te_connected:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h index 51b102dc906b..ad6f865d1f16 100644 --- a/arch/arm/plat-omap/include/plat/board-ams-delta.h +++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h @@ -28,33 +28,8 @@ #if defined (CONFIG_MACH_AMS_DELTA) -#define AMS_DELTA_LATCH1_PHYS 0x01000000 -#define AMS_DELTA_LATCH1_VIRT 0xEA000000 -#define AMS_DELTA_MODEM_PHYS 0x04000000 -#define AMS_DELTA_MODEM_VIRT 0xEB000000 -#define AMS_DELTA_LATCH2_PHYS 0x08000000 -#define AMS_DELTA_LATCH2_VIRT 0xEC000000 - -#define AMS_DELTA_LATCH1_LED_CAMERA 0x01 -#define AMS_DELTA_LATCH1_LED_ADVERT 0x02 -#define AMS_DELTA_LATCH1_LED_EMAIL 0x04 -#define AMS_DELTA_LATCH1_LED_HANDSFREE 0x08 -#define AMS_DELTA_LATCH1_LED_VOICEMAIL 0x10 -#define AMS_DELTA_LATCH1_LED_VOICE 0x20 - -#define AMS_DELTA_LATCH2_LCD_VBLEN 0x0001 -#define AMS_DELTA_LATCH2_LCD_NDISP 0x0002 -#define AMS_DELTA_LATCH2_NAND_NCE 0x0004 -#define AMS_DELTA_LATCH2_NAND_NRE 0x0008 -#define AMS_DELTA_LATCH2_NAND_NWP 0x0010 -#define AMS_DELTA_LATCH2_NAND_NWE 0x0020 -#define AMS_DELTA_LATCH2_NAND_ALE 0x0040 -#define AMS_DELTA_LATCH2_NAND_CLE 0x0080 -#define AMD_DELTA_LATCH2_KEYBRD_PWR 0x0100 -#define AMD_DELTA_LATCH2_KEYBRD_DATA 0x0200 #define AMD_DELTA_LATCH2_SCARD_RSTIN 0x0400 #define AMD_DELTA_LATCH2_SCARD_CMDVCC 0x0800 -#define AMS_DELTA_LATCH2_MODEM_NRESET 0x1000 #define AMS_DELTA_LATCH2_MODEM_CODEC 0x2000 #define AMS_DELTA_GPIO_PIN_KEYBRD_DATA 0 @@ -66,9 +41,29 @@ #define AMS_DELTA_GPIO_PIN_CONFIG 11 #define AMS_DELTA_GPIO_PIN_NAND_RB 12 +#define AMS_DELTA_GPIO_PIN_LCD_VBLEN 240 +#define AMS_DELTA_GPIO_PIN_LCD_NDISP 241 +#define AMS_DELTA_GPIO_PIN_NAND_NCE 242 +#define AMS_DELTA_GPIO_PIN_NAND_NRE 243 +#define AMS_DELTA_GPIO_PIN_NAND_NWP 244 +#define AMS_DELTA_GPIO_PIN_NAND_NWE 245 +#define AMS_DELTA_GPIO_PIN_NAND_ALE 246 +#define AMS_DELTA_GPIO_PIN_NAND_CLE 247 +#define AMS_DELTA_GPIO_PIN_KEYBRD_PWR 248 +#define AMS_DELTA_GPIO_PIN_KEYBRD_DATAOUT 249 +#define AMS_DELTA_GPIO_PIN_SCARD_RSTIN 250 +#define AMS_DELTA_GPIO_PIN_SCARD_CMDVCC 251 +#define AMS_DELTA_GPIO_PIN_MODEM_NRESET 252 +#define AMS_DELTA_GPIO_PIN_MODEM_CODEC 253 + +#define AMS_DELTA_LATCH2_GPIO_BASE AMS_DELTA_GPIO_PIN_LCD_VBLEN +#define AMS_DELTA_LATCH2_NGPIO 16 + #ifndef __ASSEMBLY__ -void ams_delta_latch1_write(u8 mask, u8 value); -void ams_delta_latch2_write(u16 mask, u16 value); +void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value); +#define ams_delta_latch2_write(mask, value) \ + ams_delta_latch_write(AMS_DELTA_LATCH2_GPIO_BASE, \ + AMS_DELTA_LATCH2_NGPIO, (mask), (value)) #endif #endif /* CONFIG_MACH_AMS_DELTA */ diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h index 97126dfd2888..d5eb4c87db9d 100644 --- a/arch/arm/plat-omap/include/plat/board.h +++ b/arch/arm/plat-omap/include/plat/board.h @@ -28,9 +28,7 @@ enum { /* Different peripheral ids */ #define OMAP_TAG_CLOCK 0x4f01 -#define OMAP_TAG_LCD 0x4f05 #define OMAP_TAG_GPIO_SWITCH 0x4f06 -#define OMAP_TAG_FBMEM 0x4f08 #define OMAP_TAG_STI_CONSOLE 0x4f09 #define OMAP_TAG_CAMERA_SENSOR 0x4f0a diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 6b51086fce18..dc6a86bf2172 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -250,7 +250,6 @@ IS_AM_SUBCLASS(335x, 0x335) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 - * cpu_is_omap4430(): True for OMAP4430 * cpu_is_omap3505(): True for OMAP3505 * cpu_is_omap3517(): True for OMAP3517 */ @@ -299,7 +298,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap3505() 0 #define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 -#define cpu_is_omap4430() 0 #define cpu_is_omap3630() 0 /* @@ -451,7 +449,12 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP447X_CLASS 0x44700044 #define OMAP4470_REV_ES1_0 (OMAP447X_CLASS | (0x10 << 8)) -void omap2_check_revision(void); +void omap2xxx_check_revision(void); +void omap3xxx_check_revision(void); +void omap4xxx_check_revision(void); +void omap3xxx_check_features(void); +void ti81xx_check_features(void); +void omap4xxx_check_features(void); /* * Runtime detection of OMAP3 features diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index 9e86ee0aed0a..2f6e9924a814 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -158,17 +158,6 @@ #define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) #define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) -#define OMAP_GPIO_IRQ(nr) (OMAP_GPIO_IS_MPUIO(nr) ? \ - IH_MPUIO_BASE + ((nr) & 0x0f) : \ - IH_GPIO_BASE + (nr)) - -#define METHOD_MPUIO 0 -#define METHOD_GPIO_1510 1 -#define METHOD_GPIO_1610 2 -#define METHOD_GPIO_7XX 3 -#define METHOD_GPIO_24XX 5 -#define METHOD_GPIO_44XX 6 - struct omap_gpio_dev_attr { int bank_width; /* GPIO bank width */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ @@ -184,10 +173,21 @@ struct omap_gpio_reg_offs { u16 irqstatus; u16 irqstatus2; u16 irqenable; + u16 irqenable2; u16 set_irqenable; u16 clr_irqenable; u16 debounce; u16 debounce_en; + u16 ctrl; + u16 wkup_en; + u16 leveldetect0; + u16 leveldetect1; + u16 risingdetect; + u16 fallingdetect; + u16 irqctrl; + u16 edgectrl1; + u16 edgectrl2; + u16 pinctrl; bool irqenable_inv; }; @@ -198,45 +198,30 @@ struct omap_gpio_platform_data { int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + bool loses_context; /* whether the bank would ever lose context */ + bool is_mpuio; /* whether the bank is of type MPUIO */ + u32 non_wakeup_gpios; struct omap_gpio_reg_offs *regs; -}; -/* TODO: Analyze removing gpio_bank_count usage from driver code */ -extern int gpio_bank_count; + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); +}; extern void omap2_gpio_prepare_for_idle(int off_mode); extern void omap2_gpio_resume_after_idle(void); extern void omap_set_gpio_debounce(int gpio, int enable); extern void omap_set_gpio_debounce_time(int gpio, int enable); -extern void omap_gpio_save_context(void); -extern void omap_gpio_restore_context(void); /*-------------------------------------------------------------------------*/ -/* Wrappers for "new style" GPIO calls, using the new infrastructure +/* + * Wrappers for "new style" GPIO calls, using the new infrastructure * which lets us plug in FPGA, I2C, and other implementations. - * * + * * The original OMAP-specific calls should eventually be removed. */ #include <linux/errno.h> #include <asm-generic/gpio.h> -static inline int irq_to_gpio(unsigned irq) -{ - int tmp; - - /* omap1 SOC mpuio */ - if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16))) - return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES; - - /* SOC gpio */ - tmp = irq - IH_GPIO_BASE; - if (tmp < OMAP_MAX_GPIO_LINES) - return tmp; - - /* we don't supply reverse mappings for non-SOC gpios */ - return -EIO; -} - #endif diff --git a/arch/arm/plat-omap/include/plat/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h deleted file mode 100644 index 886248d32b49..000000000000 --- a/arch/arm/plat-omap/include/plat/hwa742.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef _HWA742_H -#define _HWA742_H - -struct hwa742_platform_data { - unsigned te_connected:1; -}; - -#endif diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h deleted file mode 100644 index 0696bae1818b..000000000000 --- a/arch/arm/plat-omap/include/plat/io.h +++ /dev/null @@ -1,277 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/io.h - * - * IO definitions for TI OMAP processors and boards - * - * Copied from arch/arm/mach-sa1100/include/mach/io.h - * Copyright (C) 1997-1999 Russell King - * - * Copyright (C) 2009 Texas Instruments - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Modifications: - * 06-12-1997 RMK Created. - * 07-04-1999 RMK Major cleanup - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -#include <mach/hardware.h> - -#define IO_SPACE_LIMIT 0xffffffff - -/* - * We don't actually have real ISA nor PCI buses, but there is so many - * drivers out there that might just work if we fake them... - */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -/* - * ---------------------------------------------------------------------------- - * I/O mapping - * ---------------------------------------------------------------------------- - */ - -#ifdef __ASSEMBLER__ -#define IOMEM(x) (x) -#else -#define IOMEM(x) ((void __force __iomem *)(x)) -#endif - -#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */ -#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET) - -#define OMAP2_L3_IO_OFFSET 0x90000000 -#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */ - - -#define OMAP2_L4_IO_OFFSET 0xb2000000 -#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */ - -#define OMAP4_L3_IO_OFFSET 0xb4000000 -#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */ - -#define AM33XX_L4_WK_IO_OFFSET 0xb5000000 -#define AM33XX_L4_WK_IO_ADDRESS(pa) IOMEM((pa) + AM33XX_L4_WK_IO_OFFSET) - -#define OMAP4_L3_PER_IO_OFFSET 0xb1100000 -#define OMAP4_L3_PER_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET) - -#define OMAP4_GPMC_IO_OFFSET 0xa9000000 -#define OMAP4_GPMC_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_GPMC_IO_OFFSET) - -#define OMAP2_EMU_IO_OFFSET 0xaa800000 /* Emulation */ -#define OMAP2_EMU_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_EMU_IO_OFFSET) - -/* - * ---------------------------------------------------------------------------- - * Omap1 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -#define OMAP1_IO_PHYS 0xFFFB0000 -#define OMAP1_IO_SIZE 0x40000 -#define OMAP1_IO_VIRT (OMAP1_IO_PHYS - OMAP1_IO_OFFSET) - -/* - * ---------------------------------------------------------------------------- - * Omap2 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -/* We map both L3 and L4 on OMAP2 */ -#define L3_24XX_PHYS L3_24XX_BASE /* 0x68000000 --> 0xf8000000*/ -#define L3_24XX_VIRT (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET) -#define L3_24XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ -#define L4_24XX_PHYS L4_24XX_BASE /* 0x48000000 --> 0xfa000000 */ -#define L4_24XX_VIRT (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_24XX_SIZE SZ_1M /* 1MB of 128MB used, want 1MB sect */ - -#define L4_WK_243X_PHYS L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */ -#define L4_WK_243X_VIRT (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_WK_243X_SIZE SZ_1M -#define OMAP243X_GPMC_PHYS OMAP243X_GPMC_BASE -#define OMAP243X_GPMC_VIRT (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET) - /* 0x6e000000 --> 0xfe000000 */ -#define OMAP243X_GPMC_SIZE SZ_1M -#define OMAP243X_SDRC_PHYS OMAP243X_SDRC_BASE - /* 0x6D000000 --> 0xfd000000 */ -#define OMAP243X_SDRC_VIRT (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP243X_SDRC_SIZE SZ_1M -#define OMAP243X_SMS_PHYS OMAP243X_SMS_BASE - /* 0x6c000000 --> 0xfc000000 */ -#define OMAP243X_SMS_VIRT (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP243X_SMS_SIZE SZ_1M - -/* 2420 IVA */ -#define DSP_MEM_2420_PHYS OMAP2420_DSP_MEM_BASE - /* 0x58000000 --> 0xfc100000 */ -#define DSP_MEM_2420_VIRT 0xfc100000 -#define DSP_MEM_2420_SIZE 0x28000 -#define DSP_IPI_2420_PHYS OMAP2420_DSP_IPI_BASE - /* 0x59000000 --> 0xfc128000 */ -#define DSP_IPI_2420_VIRT 0xfc128000 -#define DSP_IPI_2420_SIZE SZ_4K -#define DSP_MMU_2420_PHYS OMAP2420_DSP_MMU_BASE - /* 0x5a000000 --> 0xfc129000 */ -#define DSP_MMU_2420_VIRT 0xfc129000 -#define DSP_MMU_2420_SIZE SZ_4K - -/* 2430 IVA2.1 - currently unmapped */ - -/* - * ---------------------------------------------------------------------------- - * Omap3 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -/* We map both L3 and L4 on OMAP3 */ -#define L3_34XX_PHYS L3_34XX_BASE /* 0x68000000 --> 0xf8000000 */ -#define L3_34XX_VIRT (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET) -#define L3_34XX_SIZE SZ_1M /* 44kB of 128MB used, want 1MB sect */ - -#define L4_34XX_PHYS L4_34XX_BASE /* 0x48000000 --> 0xfa000000 */ -#define L4_34XX_VIRT (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_34XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ - -/* - * ---------------------------------------------------------------------------- - * AM33XX specific IO mapping - * ---------------------------------------------------------------------------- - */ -#define L4_WK_AM33XX_PHYS L4_WK_AM33XX_BASE -#define L4_WK_AM33XX_VIRT (L4_WK_AM33XX_PHYS + AM33XX_L4_WK_IO_OFFSET) -#define L4_WK_AM33XX_SIZE SZ_4M /* 1MB of 128MB used, want 1MB sect */ - -/* - * Need to look at the Size 4M for L4. - * VPOM3430 was not working for Int controller - */ - -#define L4_PER_34XX_PHYS L4_PER_34XX_BASE - /* 0x49000000 --> 0xfb000000 */ -#define L4_PER_34XX_VIRT (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_PER_34XX_SIZE SZ_1M - -#define L4_EMU_34XX_PHYS L4_EMU_34XX_BASE - /* 0x54000000 --> 0xfe800000 */ -#define L4_EMU_34XX_VIRT (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET) -#define L4_EMU_34XX_SIZE SZ_8M - -#define OMAP34XX_GPMC_PHYS OMAP34XX_GPMC_BASE - /* 0x6e000000 --> 0xfe000000 */ -#define OMAP34XX_GPMC_VIRT (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP34XX_GPMC_SIZE SZ_1M - -#define OMAP343X_SMS_PHYS OMAP343X_SMS_BASE - /* 0x6c000000 --> 0xfc000000 */ -#define OMAP343X_SMS_VIRT (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP343X_SMS_SIZE SZ_1M - -#define OMAP343X_SDRC_PHYS OMAP343X_SDRC_BASE - /* 0x6D000000 --> 0xfd000000 */ -#define OMAP343X_SDRC_VIRT (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET) -#define OMAP343X_SDRC_SIZE SZ_1M - -/* 3430 IVA - currently unmapped */ - -/* - * ---------------------------------------------------------------------------- - * Omap4 specific IO mapping - * ---------------------------------------------------------------------------- - */ - -/* We map both L3 and L4 on OMAP4 */ -#define L3_44XX_PHYS L3_44XX_BASE /* 0x44000000 --> 0xf8000000 */ -#define L3_44XX_VIRT (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET) -#define L3_44XX_SIZE SZ_1M - -#define L4_44XX_PHYS L4_44XX_BASE /* 0x4a000000 --> 0xfc000000 */ -#define L4_44XX_VIRT (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_44XX_SIZE SZ_4M - -#define L4_PER_44XX_PHYS L4_PER_44XX_BASE - /* 0x48000000 --> 0xfa000000 */ -#define L4_PER_44XX_VIRT (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_PER_44XX_SIZE SZ_4M - -#define L4_ABE_44XX_PHYS L4_ABE_44XX_BASE - /* 0x49000000 --> 0xfb000000 */ -#define L4_ABE_44XX_VIRT (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET) -#define L4_ABE_44XX_SIZE SZ_1M - -#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE - /* 0x54000000 --> 0xfe800000 */ -#define L4_EMU_44XX_VIRT (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET) -#define L4_EMU_44XX_SIZE SZ_8M - -#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE - /* 0x50000000 --> 0xf9000000 */ -#define OMAP44XX_GPMC_VIRT (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET) -#define OMAP44XX_GPMC_SIZE SZ_1M - - -#define OMAP44XX_EMIF1_PHYS OMAP44XX_EMIF1_BASE - /* 0x4c000000 --> 0xfd100000 */ -#define OMAP44XX_EMIF1_VIRT (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET) -#define OMAP44XX_EMIF1_SIZE SZ_1M - -#define OMAP44XX_EMIF2_PHYS OMAP44XX_EMIF2_BASE - /* 0x4d000000 --> 0xfd200000 */ -#define OMAP44XX_EMIF2_SIZE SZ_1M -#define OMAP44XX_EMIF2_VIRT (OMAP44XX_EMIF1_VIRT + OMAP44XX_EMIF1_SIZE) - -#define OMAP44XX_DMM_PHYS OMAP44XX_DMM_BASE - /* 0x4e000000 --> 0xfd300000 */ -#define OMAP44XX_DMM_SIZE SZ_1M -#define OMAP44XX_DMM_VIRT (OMAP44XX_EMIF2_VIRT + OMAP44XX_EMIF2_SIZE) -/* - * ---------------------------------------------------------------------------- - * Omap specific register access - * ---------------------------------------------------------------------------- - */ - -#ifndef __ASSEMBLER__ - -/* - * NOTE: Please use ioremap + __raw_read/write where possible instead of these - */ - -extern u8 omap_readb(u32 pa); -extern u16 omap_readw(u32 pa); -extern u32 omap_readl(u32 pa); -extern void omap_writeb(u8 v, u32 pa); -extern void omap_writew(u16 v, u32 pa); -extern void omap_writel(u32 v, u32 pa); - -struct omap_sdrc_params; -extern void omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, - struct omap_sdrc_params *sdrc_cs1); - -extern void __init omap_init_consistent_dma_size(void); - -#endif - -#endif diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 2efd6454bce0..37bbbbb981b2 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -428,8 +428,16 @@ #define OMAP_GPMC_NR_IRQS 8 #define OMAP_GPMC_IRQ_END (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS) +/* PRCM IRQ handler */ +#ifdef CONFIG_ARCH_OMAP2PLUS +#define OMAP_PRCM_IRQ_BASE (OMAP_GPMC_IRQ_END) +#define OMAP_PRCM_NR_IRQS 64 +#define OMAP_PRCM_IRQ_END (OMAP_PRCM_IRQ_BASE + OMAP_PRCM_NR_IRQS) +#else +#define OMAP_PRCM_IRQ_END OMAP_GPMC_IRQ_END +#endif -#define NR_IRQS OMAP_GPMC_IRQ_END +#define NR_IRQS OMAP_PRCM_IRQ_END #define OMAP_IRQ_BIT(irq) (1 << ((irq) % 32)) diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h index 793ce9d53294..a6b21eddb212 100644 --- a/arch/arm/plat-omap/include/plat/keypad.h +++ b/arch/arm/plat-omap/include/plat/keypad.h @@ -12,6 +12,8 @@ #ifndef CONFIG_ARCH_OMAP1 #warning Please update the board to use matrix-keypad driver +#define omap_readw(reg) 0 +#define omap_writew(val, reg) do {} while (0) #endif #include <linux/input/matrix_keypad.h> diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index 8fa74e2c9d6e..18814127809a 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -27,271 +27,10 @@ #include <linux/spinlock.h> #include <linux/clk.h> -/* macro for building platform_device for McBSP ports */ -#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ -static struct platform_device omap_mcbsp##port_nr = { \ - .name = "omap-mcbsp-dai", \ - .id = port_nr - 1, \ -} - #define MCBSP_CONFIG_TYPE2 0x2 #define MCBSP_CONFIG_TYPE3 0x3 #define MCBSP_CONFIG_TYPE4 0x4 -/* McBSP register numbers. Register address offset = num * reg_step */ -enum { - /* Common registers */ - OMAP_MCBSP_REG_SPCR2 = 4, - OMAP_MCBSP_REG_SPCR1, - OMAP_MCBSP_REG_RCR2, - OMAP_MCBSP_REG_RCR1, - OMAP_MCBSP_REG_XCR2, - OMAP_MCBSP_REG_XCR1, - OMAP_MCBSP_REG_SRGR2, - OMAP_MCBSP_REG_SRGR1, - OMAP_MCBSP_REG_MCR2, - OMAP_MCBSP_REG_MCR1, - OMAP_MCBSP_REG_RCERA, - OMAP_MCBSP_REG_RCERB, - OMAP_MCBSP_REG_XCERA, - OMAP_MCBSP_REG_XCERB, - OMAP_MCBSP_REG_PCR0, - OMAP_MCBSP_REG_RCERC, - OMAP_MCBSP_REG_RCERD, - OMAP_MCBSP_REG_XCERC, - OMAP_MCBSP_REG_XCERD, - OMAP_MCBSP_REG_RCERE, - OMAP_MCBSP_REG_RCERF, - OMAP_MCBSP_REG_XCERE, - OMAP_MCBSP_REG_XCERF, - OMAP_MCBSP_REG_RCERG, - OMAP_MCBSP_REG_RCERH, - OMAP_MCBSP_REG_XCERG, - OMAP_MCBSP_REG_XCERH, - - /* OMAP1-OMAP2420 registers */ - OMAP_MCBSP_REG_DRR2 = 0, - OMAP_MCBSP_REG_DRR1, - OMAP_MCBSP_REG_DXR2, - OMAP_MCBSP_REG_DXR1, - - /* OMAP2430 and onwards */ - OMAP_MCBSP_REG_DRR = 0, - OMAP_MCBSP_REG_DXR = 2, - OMAP_MCBSP_REG_SYSCON = 35, - OMAP_MCBSP_REG_THRSH2, - OMAP_MCBSP_REG_THRSH1, - OMAP_MCBSP_REG_IRQST = 40, - OMAP_MCBSP_REG_IRQEN, - OMAP_MCBSP_REG_WAKEUPEN, - OMAP_MCBSP_REG_XCCR, - OMAP_MCBSP_REG_RCCR, - OMAP_MCBSP_REG_XBUFFSTAT, - OMAP_MCBSP_REG_RBUFFSTAT, - OMAP_MCBSP_REG_SSELCR, -}; - -/* OMAP3 sidetone control registers */ -#define OMAP_ST_REG_REV 0x00 -#define OMAP_ST_REG_SYSCONFIG 0x10 -#define OMAP_ST_REG_IRQSTATUS 0x18 -#define OMAP_ST_REG_IRQENABLE 0x1C -#define OMAP_ST_REG_SGAINCR 0x24 -#define OMAP_ST_REG_SFIRCR 0x28 -#define OMAP_ST_REG_SSELCR 0x2C - -/************************** McBSP SPCR1 bit definitions ***********************/ -#define RRST 0x0001 -#define RRDY 0x0002 -#define RFULL 0x0004 -#define RSYNC_ERR 0x0008 -#define RINTM(value) ((value)<<4) /* bits 4:5 */ -#define ABIS 0x0040 -#define DXENA 0x0080 -#define CLKSTP(value) ((value)<<11) /* bits 11:12 */ -#define RJUST(value) ((value)<<13) /* bits 13:14 */ -#define ALB 0x8000 -#define DLB 0x8000 - -/************************** McBSP SPCR2 bit definitions ***********************/ -#define XRST 0x0001 -#define XRDY 0x0002 -#define XEMPTY 0x0004 -#define XSYNC_ERR 0x0008 -#define XINTM(value) ((value)<<4) /* bits 4:5 */ -#define GRST 0x0040 -#define FRST 0x0080 -#define SOFT 0x0100 -#define FREE 0x0200 - -/************************** McBSP PCR bit definitions *************************/ -#define CLKRP 0x0001 -#define CLKXP 0x0002 -#define FSRP 0x0004 -#define FSXP 0x0008 -#define DR_STAT 0x0010 -#define DX_STAT 0x0020 -#define CLKS_STAT 0x0040 -#define SCLKME 0x0080 -#define CLKRM 0x0100 -#define CLKXM 0x0200 -#define FSRM 0x0400 -#define FSXM 0x0800 -#define RIOEN 0x1000 -#define XIOEN 0x2000 -#define IDLE_EN 0x4000 - -/************************** McBSP RCR1 bit definitions ************************/ -#define RWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/************************** McBSP XCR1 bit definitions ************************/ -#define XWDLEN1(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN1(value) ((value)<<8) /* Bits 8:14 */ - -/*************************** McBSP RCR2 bit definitions ***********************/ -#define RDATDLY(value) (value) /* Bits 0:1 */ -#define RFIG 0x0004 -#define RCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define RWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define RFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define RPHASE 0x8000 - -/*************************** McBSP XCR2 bit definitions ***********************/ -#define XDATDLY(value) (value) /* Bits 0:1 */ -#define XFIG 0x0004 -#define XCOMPAND(value) ((value)<<3) /* Bits 3:4 */ -#define XWDLEN2(value) ((value)<<5) /* Bits 5:7 */ -#define XFRLEN2(value) ((value)<<8) /* Bits 8:14 */ -#define XPHASE 0x8000 - -/************************* McBSP SRGR1 bit definitions ************************/ -#define CLKGDV(value) (value) /* Bits 0:7 */ -#define FWID(value) ((value)<<8) /* Bits 8:15 */ - -/************************* McBSP SRGR2 bit definitions ************************/ -#define FPER(value) (value) /* Bits 0:11 */ -#define FSGM 0x1000 -#define CLKSM 0x2000 -#define CLKSP 0x4000 -#define GSYNC 0x8000 - -/************************* McBSP MCR1 bit definitions *************************/ -#define RMCM 0x0001 -#define RCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define RPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define RPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/************************* McBSP MCR2 bit definitions *************************/ -#define XMCM(value) (value) /* Bits 0:1 */ -#define XCBLK(value) ((value)<<2) /* Bits 2:4 */ -#define XPABLK(value) ((value)<<5) /* Bits 5:6 */ -#define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ - -/*********************** McBSP XCCR bit definitions *************************/ -#define EXTCLKGATE 0x8000 -#define PPCONNECT 0x4000 -#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */ -#define XFULL_CYCLE 0x0800 -#define DILB 0x0020 -#define XDMAEN 0x0008 -#define XDISABLE 0x0001 - -/********************** McBSP RCCR bit definitions *************************/ -#define RFULL_CYCLE 0x0800 -#define RDMAEN 0x0008 -#define RDISABLE 0x0001 - -/********************** McBSP SYSCONFIG bit definitions ********************/ -#define CLOCKACTIVITY(value) ((value)<<8) -#define SIDLEMODE(value) ((value)<<3) -#define ENAWAKEUP 0x0004 -#define SOFTRST 0x0002 - -/********************** McBSP SSELCR bit definitions ***********************/ -#define SIDETONEEN 0x0400 - -/********************** McBSP Sidetone SYSCONFIG bit definitions ***********/ -#define ST_AUTOIDLE 0x0001 - -/********************** McBSP Sidetone SGAINCR bit definitions *************/ -#define ST_CH1GAIN(value) ((value<<16)) /* Bits 16:31 */ -#define ST_CH0GAIN(value) (value) /* Bits 0:15 */ - -/********************** McBSP Sidetone SFIRCR bit definitions **************/ -#define ST_FIRCOEFF(value) (value) /* Bits 0:15 */ - -/********************** McBSP Sidetone SSELCR bit definitions **************/ -#define ST_COEFFWRDONE 0x0004 -#define ST_COEFFWREN 0x0002 -#define ST_SIDETONEEN 0x0001 - -/********************** McBSP DMA operating modes **************************/ -#define MCBSP_DMA_MODE_ELEMENT 0 -#define MCBSP_DMA_MODE_THRESHOLD 1 -#define MCBSP_DMA_MODE_FRAME 2 - -/********************** McBSP WAKEUPEN bit definitions *********************/ -#define XEMPTYEOFEN 0x4000 -#define XRDYEN 0x0400 -#define XEOFEN 0x0200 -#define XFSXEN 0x0100 -#define XSYNCERREN 0x0080 -#define RRDYEN 0x0008 -#define REOFEN 0x0004 -#define RFSREN 0x0002 -#define RSYNCERREN 0x0001 - -/* CLKR signal muxing options */ -#define CLKR_SRC_CLKR 0 -#define CLKR_SRC_CLKX 1 - -/* FSR signal muxing options */ -#define FSR_SRC_FSR 0 -#define FSR_SRC_FSX 1 - -/* McBSP functional clock sources */ -#define MCBSP_CLKS_PRCM_SRC 0 -#define MCBSP_CLKS_PAD_SRC 1 - -/* we don't do multichannel for now */ -struct omap_mcbsp_reg_cfg { - u16 spcr2; - u16 spcr1; - u16 rcr2; - u16 rcr1; - u16 xcr2; - u16 xcr1; - u16 srgr2; - u16 srgr1; - u16 mcr2; - u16 mcr1; - u16 pcr0; - u16 rcerc; - u16 rcerd; - u16 xcerc; - u16 xcerd; - u16 rcere; - u16 rcerf; - u16 xcere; - u16 xcerf; - u16 rcerg; - u16 rcerh; - u16 xcerg; - u16 xcerh; - u16 xccr; - u16 rccr; -}; - -typedef enum { - OMAP_MCBSP_WORD_8 = 0, - OMAP_MCBSP_WORD_12, - OMAP_MCBSP_WORD_16, - OMAP_MCBSP_WORD_20, - OMAP_MCBSP_WORD_24, - OMAP_MCBSP_WORD_32, -} omap_mcbsp_word_length; - /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); @@ -312,43 +51,6 @@ struct omap_mcbsp_platform_data { int (*mux_signal)(struct device *dev, const char *signal, const char *src); }; -struct omap_mcbsp_st_data { - void __iomem *io_base_st; - bool running; - bool enabled; - s16 taps[128]; /* Sidetone filter coefficients */ - int nr_taps; /* Number of filter coefficients in use */ - s16 ch0gain; - s16 ch1gain; -}; - -struct omap_mcbsp { - struct device *dev; - unsigned long phys_base; - unsigned long phys_dma_base; - void __iomem *io_base; - u8 id; - u8 free; - - int rx_irq; - int tx_irq; - - /* DMA stuff */ - u8 dma_rx_sync; - u8 dma_tx_sync; - - /* Protect the field .free, while checking if the mcbsp is in use */ - spinlock_t lock; - struct omap_mcbsp_platform_data *pdata; - struct clk *fclk; - struct omap_mcbsp_st_data *st_data; - int dma_op_mode; - u16 max_tx_thres; - u16 max_rx_thres; - void *reg_cache; - int reg_cache_size; -}; - /** * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod * @sidetone: name of the sidetone device @@ -357,39 +59,4 @@ struct omap_mcbsp_dev_attr { const char *sidetone; }; -extern struct omap_mcbsp **mcbsp_ptr; -extern int omap_mcbsp_count; - -int omap_mcbsp_init(void); -void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config); -void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); -void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); -u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); -u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); -u16 omap_mcbsp_get_fifo_size(unsigned int id); -u16 omap_mcbsp_get_tx_delay(unsigned int id); -u16 omap_mcbsp_get_rx_delay(unsigned int id); -int omap_mcbsp_get_dma_op_mode(unsigned int id); -int omap_mcbsp_request(unsigned int id); -void omap_mcbsp_free(unsigned int id); -void omap_mcbsp_start(unsigned int id, int tx, int rx); -void omap_mcbsp_stop(unsigned int id, int tx, int rx); - -/* McBSP functional clock source changing function */ -extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); - -/* McBSP signal muxing API */ -void omap2_mcbsp1_mux_clkr_src(u8 mux); -void omap2_mcbsp1_mux_fsr_src(u8 mux); - -int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream); -int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream); - -/* Sidetone specific API */ -int omap_st_set_chgain(unsigned int id, int channel, s16 chgain); -int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain); -int omap_st_enable(unsigned int id); -int omap_st_disable(unsigned int id); -int omap_st_is_enabled(unsigned int id); - #endif diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h index 3d51b18131cc..a357eb26bd25 100644 --- a/arch/arm/plat-omap/include/plat/mcspi.h +++ b/arch/arm/plat-omap/include/plat/mcspi.h @@ -18,9 +18,6 @@ struct omap2_mcspi_dev_attr { struct omap2_mcspi_device_config { unsigned turbo_mode:1; - - /* Do we want one channel enabled at the same time? */ - unsigned single_channel:1; }; #endif diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index f75946c3293d..7a38750c0079 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -137,8 +137,6 @@ struct omap_mmc_platform_data { int (*set_power)(struct device *dev, int slot, int power_on, int vdd); int (*get_ro)(struct device *dev, int slot); - int (*set_sleep)(struct device *dev, int slot, int sleep, - int vdd, int cardsleep); void (*remux)(struct device *dev, int slot, int power_on); /* Call back before enabling / disabling regulators */ void (*before_set_reg)(struct device *dev, int slot, diff --git a/arch/arm/plat-omap/include/plat/omap-secure.h b/arch/arm/plat-omap/include/plat/omap-secure.h index 64f9d1c7f1bb..8c7994ce9869 100644 --- a/arch/arm/plat-omap/include/plat/omap-secure.h +++ b/arch/arm/plat-omap/include/plat/omap-secure.h @@ -3,11 +3,17 @@ #include <linux/types.h> -#ifdef CONFIG_ARCH_OMAP2PLUS +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) extern int omap_secure_ram_reserve_memblock(void); #else static inline void omap_secure_ram_reserve_memblock(void) { } #endif +#ifdef CONFIG_OMAP4_ERRATA_I688 +extern int omap_barrier_reserve_memblock(void); +#else +static inline void omap_barrier_reserve_memblock(void) +{ } +#endif #endif /* __OMAP_SECURE_H__ */ diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h index 9fe6c8783236..8ad0a377a54b 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -1,15 +1,6 @@ #ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H #define ARCH_ARM_PLAT_OMAP4_KEYPAD_H -#include <linux/input/matrix_keypad.h> - -struct omap4_keypad_platform_data { - const struct matrix_keymap_data *keymap_data; - - u8 rows; - u8 cols; -}; - extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, struct omap_board_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 51423d2727a5..4327b2c90c3d 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -36,7 +36,7 @@ #include <plat/omap_hwmod.h> -extern struct device omap_device_parent; +extern struct dev_pm_domain omap_device_pm_domain; /* omap_device._state values */ #define OMAP_DEVICE_STATE_UNKNOWN 0 @@ -100,6 +100,13 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id, struct omap_device_pm_latency *pm_lats, int pm_lats_cnt, int is_early_device); +struct omap_device *omap_device_alloc(struct platform_device *pdev, + struct omap_hwmod **ohs, int oh_cnt, + struct omap_device_pm_latency *pm_lats, + int pm_lats_cnt); +void omap_device_delete(struct omap_device *od); +int omap_device_register(struct platform_device *pdev); + void __iomem *omap_device_get_rt_va(struct omap_device *od); struct device *omap_device_get_by_hwmod_name(const char *oh_name); diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 647010109afa..9e8e63d52aab 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -484,7 +484,6 @@ struct omap_hwmod_class { * @main_clk: main clock: OMAP clock name * @_clk: pointer to the main struct clk (filled in at runtime) * @opt_clks: other device clocks that drivers can request (0..*) - * @vdd_name: voltage domain name * @voltdm: pointer to voltage domain (filled in at runtime) * @masters: ptr to array of OCP ifs that this hwmod can initiate on * @slaves: ptr to array of OCP ifs that this hwmod can respond on @@ -528,7 +527,6 @@ struct omap_hwmod { struct omap_hwmod_opt_clk *opt_clks; char *clkdm_name; struct clockdomain *clkdm; - char *vdd_name; struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ void *dev_attr; diff --git a/arch/arm/plat-omap/include/plat/remoteproc.h b/arch/arm/plat-omap/include/plat/remoteproc.h new file mode 100644 index 000000000000..b10eac89e2e9 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/remoteproc.h @@ -0,0 +1,57 @@ +/* + * Remote Processor - omap-specific bits + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PLAT_REMOTEPROC_H +#define _PLAT_REMOTEPROC_H + +struct rproc_ops; +struct platform_device; + +/* + * struct omap_rproc_pdata - omap remoteproc's platform data + * @name: the remoteproc's name + * @oh_name: omap hwmod device + * @oh_name_opt: optional, secondary omap hwmod device + * @firmware: name of firmware file to load + * @mbox_name: name of omap mailbox device to use with this rproc + * @ops: start/stop rproc handlers + * @device_enable: omap-specific handler for enabling a device + * @device_shutdown: omap-specific handler for shutting down a device + */ +struct omap_rproc_pdata { + const char *name; + const char *oh_name; + const char *oh_name_opt; + const char *firmware; + const char *mbox_name; + const struct rproc_ops *ops; + int (*device_enable) (struct platform_device *pdev); + int (*device_shutdown) (struct platform_device *pdev); +}; + +#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE) + +void __init omap_rproc_reserve_cma(void); + +#else + +void __init omap_rproc_reserve_cma(void) +{ +} + +#endif + +#endif /* _PLAT_REMOTEPROC_H */ diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h index 925b12b500dc..9bb978ecd884 100644 --- a/arch/arm/plat-omap/include/plat/sdrc.h +++ b/arch/arm/plat-omap/include/plat/sdrc.h @@ -16,7 +16,6 @@ * published by the Free Software Foundation. */ -#include <mach/io.h> /* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 198d1e6a4a6c..b073e5f2b190 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -110,7 +110,6 @@ struct omap_board_data; struct omap_uart_port_info; extern void omap_serial_init(void); -extern int omap_uart_can_sleep(void); extern void omap_serial_board_init(struct omap_uart_port_info *platform_data); extern void omap_serial_init_port(struct omap_board_data *bdata, struct omap_uart_port_info *platform_data); diff --git a/arch/arm/plat-omap/include/plat/sram.h b/arch/arm/plat-omap/include/plat/sram.h index 75aa1b2bef51..227ae2657554 100644 --- a/arch/arm/plat-omap/include/plat/sram.h +++ b/arch/arm/plat-omap/include/plat/sram.h @@ -101,4 +101,5 @@ static inline void omap_push_sram_idle(void) {} #else #define OMAP4_SRAM_PA 0x40300000 #endif +#define AM33XX_SRAM_PA 0x40300000 #endif diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h deleted file mode 100644 index 8e5ebd74b129..000000000000 --- a/arch/arm/plat-omap/include/plat/system.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copied from arch/arm/mach-sa1100/include/mach/system.h - * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net> - */ -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <asm/proc-fns.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -#endif diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h index d2fcd789bb9a..1b4b2da86203 100644 --- a/arch/arm/plat-omap/include/plat/tc.h +++ b/arch/arm/plat-omap/include/plat/tc.h @@ -84,23 +84,6 @@ #define EMIFS_CCS(n) (EMIFS_CS0_CONFIG + (4 * (n))) #define EMIFS_ACS(n) (EMIFS_ACS0 + (4 * (n))) -/* Almost all documentation for chip and board memory maps assumes - * BM is clear. Most devel boards have a switch to control booting - * from NOR flash (using external chipselect 3) rather than mask ROM, - * which uses BM to interchange the physical CS0 and CS3 addresses. - */ -static inline u32 omap_cs0_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? OMAP_CS3_PHYS : 0; -} - -static inline u32 omap_cs3_phys(void) -{ - return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM) - ? 0 : OMAP_CS3_PHYS; -} - #endif /* __ASSEMBLER__ */ #endif /* __ASM_ARCH_TC_H */ diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 6ee90495ca4c..cc3f11ba7a99 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -160,6 +160,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP3(3, igep0020); DEBUG_LL_OMAP3(3, igep0030); DEBUG_LL_OMAP3(3, nokia_rm680); + DEBUG_LL_OMAP3(3, nokia_rm696); DEBUG_LL_OMAP3(3, nokia_rx51); DEBUG_LL_OMAP3(3, omap3517evm); DEBUG_LL_OMAP3(3, omap3_beagle); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index dc864b580da0..762eeb0626c1 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -3,6 +3,7 @@ #ifndef __ASM_ARCH_OMAP_USB_H #define __ASM_ARCH_OMAP_USB_H +#include <linux/io.h> #include <linux/usb/musb.h> #include <plat/board.h> @@ -105,6 +106,45 @@ extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); + +/* + * NOTE: Please update omap USB drivers to use ioremap + read/write + */ + +#define OMAP2_L4_IO_OFFSET 0xb2000000 +#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) + +static inline u8 omap_readb(u32 pa) +{ + return __raw_readb(OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline u16 omap_readw(u32 pa) +{ + return __raw_readw(OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline u32 omap_readl(u32 pa) +{ + return __raw_readl(OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline void omap_writeb(u8 v, u32 pa) +{ + __raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa)); +} + + +static inline void omap_writew(u16 v, u32 pa) +{ + __raw_writew(v, OMAP2_L4_IO_ADDRESS(pa)); +} + +static inline void omap_writel(u32 v, u32 pa) +{ + __raw_writel(v, OMAP2_L4_IO_ADDRESS(pa)); +} + #endif extern void am35x_musb_reset(void); diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h index 0aa4ecd12c7d..4d65b7d06e6c 100644 --- a/arch/arm/plat-omap/include/plat/vram.h +++ b/arch/arm/plat-omap/include/plat/vram.h @@ -23,40 +23,21 @@ #include <linux/types.h> -#define OMAP_VRAM_MEMTYPE_SDRAM 0 -#define OMAP_VRAM_MEMTYPE_SRAM 1 -#define OMAP_VRAM_MEMTYPE_MAX 1 - extern int omap_vram_add_region(unsigned long paddr, size_t size); extern int omap_vram_free(unsigned long paddr, size_t size); -extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr); +extern int omap_vram_alloc(size_t size, unsigned long *paddr); extern int omap_vram_reserve(unsigned long paddr, size_t size); extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram, unsigned long *largest_free_block); #ifdef CONFIG_OMAP2_VRAM extern void omap_vram_set_sdram_vram(u32 size, u32 start); -extern void omap_vram_set_sram_vram(u32 size, u32 start); extern void omap_vram_reserve_sdram_memblock(void); -extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail); #else static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { } -static inline void omap_vram_set_sram_vram(u32 size, u32 start) { } static inline void omap_vram_reserve_sdram_memblock(void) { } -static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart, - unsigned long sram_vstart, - unsigned long sram_size, - unsigned long pstart_avail, - unsigned long size_avail) -{ - return 0; -} #endif #endif |