diff options
Diffstat (limited to 'arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 337 |
1 files changed, 0 insertions, 337 deletions
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi deleted file mode 100644 index 984c737fa627..000000000000 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ /dev/null @@ -1,337 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include <dt-bindings/interrupt-controller/irq.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/phy/phy.h> -#include <dt-bindings/soc/bcm-pmb.h> - -/dts-v1/; - -/ { - interrupt-parent = <&gic>; - - #address-cells = <2>; - #size-cells = <2>; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x0>; - next-level-cache = <&l2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x1>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x2>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "brcm,brahma-b53"; - reg = <0x3>; - enable-method = "spin-table"; - cpu-release-addr = <0x0 0xfff8>; - next-level-cache = <&l2>; - }; - - l2: l2-cache0 { - compatible = "cache"; - }; - }; - - axi@81000000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x81000000 0x4000>; - - gic: interrupt-controller@1000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x1000 0x1000>, - <0x2000 0x2000>; - }; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; - }; - - pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; - }; - - clocks { - periph_clk: periph_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - clock-output-names = "periph"; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0x80000000 0x281000>; - - enet: ethernet@2000 { - compatible = "brcm,bcm4908-enet"; - reg = <0x2000 0x1000>; - - interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "rx", "tx"; - }; - - usb_phy: usb-phy@c200 { - compatible = "brcm,bcm4908-usb-phy"; - reg = <0xc200 0x100>; - reg-names = "ctrl"; - power-domains = <&pmb BCM_PMB_HOST_USB>; - dr_mode = "host"; - brcm,has-xhci; - brcm,has-eohci; - #phy-cells = <1>; - status = "disabled"; - }; - - ehci: usb@c300 { - compatible = "generic-ehci"; - reg = <0xc300 0x100>; - interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_phy PHY_TYPE_USB2>; - status = "disabled"; - }; - - ohci: usb@c400 { - compatible = "generic-ohci"; - reg = <0xc400 0x100>; - interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_phy PHY_TYPE_USB2>; - status = "disabled"; - }; - - xhci: usb@d000 { - compatible = "generic-xhci"; - reg = <0xd000 0x8c8>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - phys = <&usb_phy PHY_TYPE_USB3>; - status = "disabled"; - }; - - bus@80000 { - compatible = "simple-bus"; - #size-cells = <1>; - #address-cells = <1>; - ranges = <0 0x80000 0x50000>; - - ethernet-switch@0 { - compatible = "brcm,bcm4908-switch"; - reg = <0x0 0x40000>, - <0x40000 0x110>, - <0x40340 0x30>, - <0x40380 0x30>, - <0x40600 0x34>, - <0x40800 0x208>; - reg-names = "core", "reg", "intrl2_0", - "intrl2_1", "fcb", "acb"; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; - brcm,num-gphy = <5>; - brcm,num-rgmii-ports = <2>; - - #address-cells = <1>; - #size-cells = <0>; - - ports: ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - phy-mode = "internal"; - phy-handle = <&phy8>; - }; - - port@1 { - reg = <1>; - phy-mode = "internal"; - phy-handle = <&phy9>; - }; - - port@2 { - reg = <2>; - phy-mode = "internal"; - phy-handle = <&phy10>; - }; - - port@3 { - reg = <3>; - phy-mode = "internal"; - phy-handle = <&phy11>; - }; - - port@8 { - reg = <8>; - phy-mode = "internal"; - ethernet = <&enet>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - }; - - mdio: mdio@405c0 { - compatible = "brcm,unimac-mdio"; - reg = <0x405c0 0x8>; - reg-names = "mdio"; - #size-cells = <0>; - #address-cells = <1>; - - phy8: ethernet-phy@8 { - reg = <8>; - }; - - phy9: ethernet-phy@9 { - reg = <9>; - }; - - phy10: ethernet-phy@a { - reg = <10>; - }; - - phy11: ethernet-phy@b { - reg = <11>; - }; - - phy12: ethernet-phy@c { - reg = <12>; - }; - }; - }; - - procmon: syscon@280000 { - compatible = "simple-bus"; - reg = <0x280000 0x1000>; - ranges; - - #address-cells = <1>; - #size-cells = <1>; - - pmb: power-controller@2800c0 { - compatible = "brcm,bcm4908-pmb"; - reg = <0x2800c0 0x40>; - #power-domain-cells = <1>; - }; - }; - }; - - bus@ff800000 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x00 0xff800000 0x3000>; - - timer: timer@400 { - compatible = "brcm,bcm6328-timer", "syscon"; - reg = <0x400 0x3c>; - }; - - gpio0: gpio-controller@500 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0x500 0x28>, <0x528 0x28>; - - #gpio-cells = <2>; - gpio-controller; - }; - - uart0: serial@640 { - compatible = "brcm,bcm6345-uart"; - reg = <0x640 0x18>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&periph_clk>; - clock-names = "refclk"; - status = "okay"; - }; - - nand-controller@1800 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "brcm,nand-bcm63138", "brcm,brcmnand-v7.1", "brcm,brcmnand"; - reg = <0x1800 0x600>, <0x2000 0x10>; - reg-names = "nand", "nand-int-base"; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "nand"; - status = "okay"; - - nandcs: nand@0 { - compatible = "brcm,nandcs"; - reg = <0>; - }; - }; - - misc@2600 { - compatible = "brcm,misc", "simple-mfd"; - reg = <0x2600 0xe4>; - - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x00 0x2600 0xe4>; - - reset-controller@2644 { - compatible = "brcm,bcm4908-misc-pcie-reset"; - reg = <0x44 0x04>; - #reset-cells = <1>; - }; - }; - }; - - reboot { - compatible = "syscon-reboot"; - regmap = <&timer>; - offset = <0x34>; - mask = <1>; - }; -}; |