diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 264 |
1 files changed, 264 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts new file mode 100644 index 000000000000..0c44b3cbef77 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -0,0 +1,264 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2160ARDB +// +// Copyright 2018-2020 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2160ARDB"; + compatible = "fsl,lx2160a-rdb", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + mmc0 = &esdhc0; + mmc1 = &esdhc1; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "MC34717-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&crypto { + status = "okay"; +}; + +&dpmac3 { + phy-handle = <&aquantia_phy1>; + phy-connection-type = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac4 { + phy-handle = <&aquantia_phy2>; + phy-connection-type = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac5 { + phy-handle = <&inphi_phy>; +}; + +&dpmac6 { + phy-handle = <&inphi_phy>; +}; + +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + +&emdio1 { + status = "okay"; + + rgmii_phy1: ethernet-phy@1 { + /* AR8035 PHY */ + compatible = "ethernet-phy-id004d.d072"; + interrupts-extended = <&extirq 4 IRQ_TYPE_LEVEL_LOW>; + reg = <0x1>; + eee-broken-1000t; + }; + + rgmii_phy2: ethernet-phy@2 { + /* AR8035 PHY */ + compatible = "ethernet-phy-id004d.d072"; + interrupts-extended = <&extirq 5 IRQ_TYPE_LEVEL_LOW>; + reg = <0x2>; + eee-broken-1000t; + }; + + aquantia_phy1: ethernet-phy@4 { + /* AQR107 PHY */ + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 2 IRQ_TYPE_LEVEL_LOW>; + reg = <0x4>; + }; + + aquantia_phy2: ethernet-phy@5 { + /* AQR107 PHY */ + compatible = "ethernet-phy-ieee802.3-c45"; + interrupts-extended = <&extirq 3 IRQ_TYPE_LEVEL_LOW>; + reg = <0x5>; + }; +}; + +&can0 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&can1 { + status = "okay"; + + can-transceiver { + max-bitrate = <5000000>; + }; +}; + +&emdio2 { + status = "okay"; + + inphi_phy: ethernet-phy@0 { + compatible = "ethernet-phy-id0210.7440"; + reg = <0x0>; + }; +}; + +&esdhc0 { + sd-uhs-sdr104; + sd-uhs-sdr50; + sd-uhs-sdr25; + sd-uhs-sdr12; + status = "okay"; +}; + +&esdhc1 { + mmc-hs200-1_8v; + mmc-hs400-1_8v; + bus-width = <8>; + status = "okay"; +}; + +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; + + mt35xu512aba1: flash@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <1>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; +}; + +&i2c0 { + status = "okay"; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + temperature-sensor@4d { + compatible = "nxp,sa56004"; + reg = <0x4d>; + vcc-supply = <&sb_3v3>; + }; + }; + }; +}; + +&i2c4 { + status = "okay"; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ_RTC_B -> IRQ08, active low */ + interrupts-extended = <&extirq 8 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&optee { + status = "okay"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio4 { + status = "okay"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; |