diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 153 |
1 files changed, 140 insertions, 13 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index 60d47c71499b..ae08556b2ef2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -7,6 +7,7 @@ #include "dt-bindings/input/input.h" #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include "dt-bindings/pwm/pwm.h" #include "dt-bindings/usb/pd.h" #include "imx8mq.dtsi" @@ -14,6 +15,7 @@ / { model = "Purism Librem 5"; compatible = "purism,librem5", "fsl,imx8mq"; + chassis-type = "handset"; backlight_dsi: backlight-dsi { compatible = "led-backlight"; @@ -36,18 +38,45 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_keys>; - vol-down { + key-vol-down { label = "VOL_DOWN"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEDOWN>; debounce-interval = <50>; + wakeup-source; }; - vol-up { + key-vol-up { label = "VOL_UP"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; linux,code = <KEY_VOLUMEUP>; debounce-interval = <50>; + wakeup-source; + }; + }; + + led-controller { + compatible = "pwm-leds"; + + led-0 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_BLUE>; + max-brightness = <248>; + pwms = <&pwm2 0 50000 0>; + }; + + led-1 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_GREEN>; + max-brightness = <248>; + pwms = <&pwm4 0 50000 0>; + }; + + led-2 { + function = LED_FUNCTION_STATUS; + color = <LED_COLOR_ID_RED>; + max-brightness = <248>; + pwms = <&pwm3 0 50000 0>; }; }; @@ -62,6 +91,40 @@ enable-active-high; }; + /* + * the pinctrl for reg_csi_1v8 and reg_vcam_1v8 is added to the PMIC + * since we can't have it twice in the 2 different regulator nodes. + */ + reg_csi_1v8: regulator-csi-1v8 { + compatible = "regulator-fixed"; + regulator-name = "CAMERA_VDDIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <®_vdd_3v3>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /* controlled by the CAMERA_POWER_KEY HKS */ + reg_vcam_1v2: regulator-vcam-1v2 { + compatible = "regulator-fixed"; + regulator-name = "CAMERA_VDDD_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + vin-supply = <®_vdd_1v8>; + enable-active-high; + }; + + reg_vcam_2v8: regulator-vcam-2v8 { + compatible = "regulator-fixed"; + regulator-name = "CAMERA_VDDA_2V8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + vin-supply = <®_vdd_3v3>; + gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_gnss: regulator-gnss { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -237,8 +300,13 @@ cpu-supply = <&buck2_reg>; }; +&csi1 { + status = "okay"; +}; + &ddrc { operating-points-v2 = <&ddrc_opp_table>; + status = "okay"; ddrc_opp_table: opp-table { compatible = "operating-points-v2"; @@ -283,15 +351,10 @@ }; partition@30000 { - label = "protected1"; - reg = <0x30000 0x10000>; + label = "firmware"; + reg = <0x30000 0x1d0000>; read-only; }; - - partition@40000 { - label = "rw"; - reg = <0x40000 0x1C0000>; - }; }; }; @@ -329,12 +392,24 @@ >; }; + pinctrl_camera_pwr: camerapwrgrp { + fsl,pins = < + /* CAMERA_PWR_EN_3V3 */ + MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x83 + >; + }; + + pinctrl_csi1: csi1grp { + fsl,pins = < + /* CSI1_NRST */ + MX8MQ_IOMUXC_ENET_RXC_GPIO1_IO25 0x83 + >; + }; + pinctrl_charger_in: chargeringrp { fsl,pins = < /* CHRG_INT */ MX8MQ_IOMUXC_NAND_CE2_B_GPIO3_IO3 0x80 - /* CHG_STATUS_B */ - MX8MQ_IOMUXC_NAND_ALE_GPIO3_IO0 0x80 >; }; @@ -698,6 +773,10 @@ interrupt-names = "irq"; connector { + compatible = "usb-c-connector"; + label = "USB-C"; + data-role = "dual"; + ports { #address-cells = <1>; #size-cells = <0>; @@ -725,7 +804,7 @@ compatible = "rohm,bd71837"; reg = <0x4b>; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pmic>; + pinctrl-0 = <&pinctrl_pmic>, <&pinctrl_camera_pwr>; clocks = <&pmic_osc>; clock-names = "osc"; clock-output-names = "pmic_clk"; @@ -958,6 +1037,31 @@ >; }; + camera_front: camera@20 { + compatible = "hynix,hi846"; + reg = <0x20>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_csi1>; + clocks = <&clk IMX8MQ_CLK_CLKO2>; + assigned-clocks = <&clk IMX8MQ_CLK_CLKO2>; + assigned-clock-rates = <25000000>; + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + vdda-supply = <®_vcam_2v8>; + vddd-supply = <®_vcam_1v2>; + vddio-supply = <®_csi_1v8>; + rotation = <90>; + orientation = <0>; + + port { + camera1_ep: endpoint { + data-lanes = <1 2>; + link-frequencies = /bits/ 64 + <80000000 200000000 300000000>; + remote-endpoint = <&mipi1_sensor_ep>; + }; + }; + }; + backlight@36 { compatible = "ti,lm36922"; reg = <0x36>; @@ -996,6 +1100,12 @@ pinctrl-0 = <&pinctrl_i2c4>; status = "okay"; + vcm@c { + compatible = "dongwoon,dw9714"; + reg = <0x0c>; + vcc-supply = <®_csi_1v8>; + }; + bat: fuel-gauge@36 { compatible = "maxim,max17055"; reg = <0x36>; @@ -1003,6 +1113,7 @@ interrupts = <20 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gauge>; + power-supplies = <&bq25895>; maxim,over-heat-temp = <700>; maxim,over-volt = <4500>; maxim,rsns-microohm = <5000>; @@ -1019,7 +1130,7 @@ ti,precharge-current = <130000>; /* uA */ ti,minimum-sys-voltage = <3700000>; /* uV */ ti,boost-voltage = <5000000>; /* uV */ - ti,boost-max-current = <500000>; /* uA */ + ti,boost-max-current = <1500000>; /* uA */ ti,use-vinmin-threshold = <1>; /* enable VINDPM */ ti,vinmin-threshold = <3900000>; /* uV */ monitored-battery = <&bat>; @@ -1031,6 +1142,21 @@ status = "okay"; }; +&mipi_csi1 { + status = "okay"; + + ports { + port@0 { + reg = <0>; + + mipi1_sensor_ep: endpoint { + remote-endpoint = <&camera1_ep>; + data-lanes = <1 2>; + }; + }; + }; +}; + &mipi_dsi { #address-cells = <1>; #size-cells = <0>; @@ -1174,6 +1300,7 @@ #size-cells = <0>; dr_mode = "otg"; snps,dis_u3_susphy_quirk; + usb-role-switch; status = "okay"; port@0 { |