diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 188 |
1 files changed, 185 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts index 81d269296610..9dda2a1554c3 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts @@ -26,7 +26,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_gpio_keys>; - power { + button-power { label = "Power Button"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; linux,code = <KEY_POWER>; @@ -34,6 +34,30 @@ }; }; + hdmi-connector { + compatible = "hdmi-connector"; + ddc-i2c-bus = <&ddc_i2c_bus>; + label = "hdmi"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <<8912_out>; + }; + }; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_vref_0v9: regulator-vref-0v9 { compatible = "regulator-fixed"; regulator-name = "vref-0v9"; @@ -70,6 +94,9 @@ }; }; +&dphy { + status = "okay"; +}; &fec1 { pinctrl-names = "default"; @@ -91,6 +118,15 @@ }; }; +/* Release reset of the USB Host HUB */ +&gpio1 { + usb-host-reset-hog { + gpio-hog; + gpios = <14 GPIO_ACTIVE_HIGH>; + output-high; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -116,7 +152,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_arm_dram>; reg = <0x60>; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <900000>; regulator-max-microvolt = <1000000>; regulator-always-on; vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; @@ -150,7 +186,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>; reg = <0x60>; - regulator-min-microvolt = <900000>; + regulator-min-microvolt = <900000>; regulator-max-microvolt = <1000000>; regulator-always-on; vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; @@ -174,6 +210,98 @@ }; }; +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + pca9546: i2cmux@70 { + compatible = "nxp,pca9546"; + reg = <0x70>; + #address-cells = <1>; + #size-cells = <0>; + + i2c4@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + + hdmi-bridge@48 { + compatible = "lontium,lt8912b"; + reg = <0x48> ; + reset-gpios = <&max7323 0 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + hdmi_out_in: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_dsi_out>; + }; + }; + + port@1 { + reg = <1>; + + lt8912_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + }; + + ddc_i2c_bus: i2c4@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + }; + + i2c4@3 { + reg = <3>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + + max7323: gpio-expander@68 { + compatible = "maxim,max7323"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_max7323>; + gpio-controller; + reg = <0x68>; + #gpio-cells = <2>; + }; + }; + }; +}; + +&lcdif { + status = "okay"; +}; + +&mipi_dsi { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + ports { + port@1 { + reg = <1>; + + mipi_dsi_out: endpoint { + remote-endpoint = <&hdmi_out_in>; + }; + }; + }; +}; + &uart1 { /* console */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -190,6 +318,29 @@ status = "okay"; }; +&usb_dwc3_0 { + dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3_0>; + status = "okay"; +}; + +&usb3_phy0 { + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; +}; + +&usb_dwc3_1 { + dr_mode = "host"; + status = "okay"; +}; + +&usb3_phy1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3_1>; + status = "okay"; +}; + &usdhc1 { assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>; assigned-clock-rates = <400000000>; @@ -321,6 +472,19 @@ >; }; + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f + MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f + >; + }; + + pinctrl_max7323: max7323grp { + fsl,pins = < + MX8MQ_IOMUXC_NAND_RE_B_GPIO3_IO15 0x19 + >; + }; + pinctrl_reg_arm_dram: reg-arm-dramgrp { fsl,pins = < MX8MQ_IOMUXC_SAI5_RXD3_GPIO3_IO24 0x16 @@ -339,6 +503,12 @@ >; }; + pinctrl_reg_usbotg_vbus: reg-usbotg-vbusgrp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x16 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x45 @@ -353,6 +523,18 @@ >; }; + pinctrl_usb3_0: usb3-0grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO13_USB1_OTG_OC 0x16 + >; + }; + + pinctrl_usb3_1: usb3-1grp { + fsl,pins = < + MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x16 + >; + }; + pinctrl_usdhc1: usdhc1grp { fsl,pins = < MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83 |